summaryrefslogtreecommitdiff
path: root/lib/hexdump.c
diff options
context:
space:
mode:
authorXin Long <lucien.xin@gmail.com>2020-10-29 10:05:06 +0300
committerJakub Kicinski <kuba@kernel.org>2020-10-31 01:24:30 +0300
commit600af7fd809ad2a307b6c53b2a3e45453a75cdb6 (patch)
treed955aff3e052e310b0c585056341072ce427ace6 /lib/hexdump.c
parentbcd623d8e9fa5f82bbd8cd464dc418d24139157b (diff)
downloadlinux-600af7fd809ad2a307b6c53b2a3e45453a75cdb6.tar.xz
sctp: support for sending packet over udp4 sock
This patch does what the rfc6951#section-5.3 says for ipv4: "Within the UDP header, the source port MUST be the local UDP encapsulation port number of the SCTP stack, and the destination port MUST be the remote UDP encapsulation port number maintained for the association and the destination address to which the packet is sent (see Section 5.1). Because the SCTP packet is the UDP payload, the length of the UDP packet MUST be the length of the SCTP packet plus the size of the UDP header. The SCTP checksum MUST be computed for IPv4 and IPv6, and the UDP checksum SHOULD be computed for IPv4 and IPv6." Some places need to be adjusted in sctp_packet_transmit(): 1. For non-gso packets, when transport's encap_port is set, sctp checksum has to be done in sctp_packet_pack(), as the outer udp will use ip_summed = CHECKSUM_PARTIAL to do the offload setting for checksum. 2. Delay calling dst_clone() and skb_dst_set() for non-udp packets until sctp_v4_xmit(), as for udp packets, skb_dst_set() is not needed before calling udp_tunnel_xmit_skb(). then in sctp_v4_xmit(): 1. Go to udp_tunnel_xmit_skb() only when transport->encap_port and net->sctp.udp_port both are set, as these are one for dst port and another for src port. 2. For gso packet, SKB_GSO_UDP_TUNNEL_CSUM is set for gso_type, and with this udp checksum can be done in __skb_udp_tunnel_segment() for each segments after the sctp gso. 3. inner_mac_header and inner_transport_header are set, as these will be needed in __skb_udp_tunnel_segment() to find the right headers. 4. df and ttl are calculated, as these are the required params by udp_tunnel_xmit_skb(). 5. nocheck param has to be false, as "the UDP checksum SHOULD be computed for IPv4 and IPv6", says in rfc6951#section-5.3. v1->v2: - Use sp->udp_port instead in sctp_v4_xmit(), which is more safe. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'lib/hexdump.c')
0 files changed, 0 insertions, 0 deletions