Merge branch 'akpm' (patches from Andrew)

Merge first patchbomb from Andrew Morton:

 - arch/sh updates

 - ocfs2 updates

 - kernel/watchdog feature

 - about half of mm/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits)
  Documentation: update arch list in the 'memtest' entry
  Kconfig: memtest: update number of test patterns up to 17
  arm: add support for memtest
  arm64: add support for memtest
  memtest: use phys_addr_t for physical addresses
  mm: move memtest under mm
  mm, hugetlb: abort __get_user_pages if current has been oom killed
  mm, mempool: do not allow atomic resizing
  memcg: print cgroup information when system panics due to panic_on_oom
  mm: numa: remove migrate_ratelimited
  mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE
  mm: split ET_DYN ASLR from mmap ASLR
  s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE
  mm: expose arch_mmap_rnd when available
  s390: standardize mmap_rnd() usage
  powerpc: standardize mmap_rnd() usage
  mips: extract logic for mmap_rnd()
  arm64: standardize mmap_rnd() usage
  x86: standardize mmap_rnd() usage
  arm: factor out mmap ASLR into mmap_rnd
  ...

1 files changed, 215 insertions, 74 deletions

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 9a056f5bc02c..2316f50b07a4 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -24,8 +24,33 @@
 #include <linux/kvm_para.h>
 #include <linux/perf_event.h>
 
-int watchdog_user_enabled = 1;
+/*
+ * The run state of the lockup detectors is controlled by the content of the
+ * 'watchdog_enabled' variable. Each lockup detector has its dedicated bit -
+ * bit 0 for the hard lockup detector and bit 1 for the soft lockup detector.
+ *
+ * 'watchdog_user_enabled', 'nmi_watchdog_enabled' and 'soft_watchdog_enabled'
+ * are variables that are only used as an 'interface' between the parameters
+ * in /proc/sys/kernel and the internal state bits in 'watchdog_enabled'. The
+ * 'watchdog_thresh' variable is handled differently because its value is not
+ * boolean, and the lockup detectors are 'suspended' while 'watchdog_thresh'
+ * is equal zero.
+ */
+#define NMI_WATCHDOG_ENABLED_BIT   0
+#define SOFT_WATCHDOG_ENABLED_BIT  1
+#define NMI_WATCHDOG_ENABLED      (1 << NMI_WATCHDOG_ENABLED_BIT)
+#define SOFT_WATCHDOG_ENABLED     (1 << SOFT_WATCHDOG_ENABLED_BIT)
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED|NMI_WATCHDOG_ENABLED;
+#else
+static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED;
+#endif
+int __read_mostly nmi_watchdog_enabled;
+int __read_mostly soft_watchdog_enabled;
+int __read_mostly watchdog_user_enabled;
 int __read_mostly watchdog_thresh = 10;
+
 #ifdef CONFIG_SMP
 int __read_mostly sysctl_softlockup_all_cpu_backtrace;
 #else
@@ -58,8 +83,6 @@ static unsigned long soft_lockup_nmi_warn;
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
 static int hardlockup_panic =
 			CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
-
-static bool hardlockup_detector_enabled = true;
 /*
  * We may not want to enable hard lockup detection by default in all cases,
  * for example when running the kernel as a guest on a hypervisor. In these
@@ -68,14 +91,9 @@ static bool hardlockup_detector_enabled = true;
  * kernel command line parameters are parsed, because otherwise it is not
  * possible to override this in hardlockup_panic_setup().
  */
-void watchdog_enable_hardlockup_detector(bool val)
-{
-	hardlockup_detector_enabled = val;
-}
-
-bool watchdog_hardlockup_detector_is_enabled(void)
+void hardlockup_detector_disable(void)
 {
-	return hardlockup_detector_enabled;
+	watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
 }
 
 static int __init hardlockup_panic_setup(char *str)
@@ -85,15 +103,9 @@ static int __init hardlockup_panic_setup(char *str)
 	else if (!strncmp(str, "nopanic", 7))
 		hardlockup_panic = 0;
 	else if (!strncmp(str, "0", 1))
-		watchdog_user_enabled = 0;
-	else if (!strncmp(str, "1", 1) || !strncmp(str, "2", 1)) {
-		/*
-		 * Setting 'nmi_watchdog=1' or 'nmi_watchdog=2' (legacy option)
-		 * has the same effect.
-		 */
-		watchdog_user_enabled = 1;
-		watchdog_enable_hardlockup_detector(true);
-	}
+		watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+	else if (!strncmp(str, "1", 1))
+		watchdog_enabled |= NMI_WATCHDOG_ENABLED;
 	return 1;
 }
 __setup("nmi_watchdog=", hardlockup_panic_setup);
@@ -112,19 +124,18 @@ __setup("softlockup_panic=", softlockup_panic_setup);
 
 static int __init nowatchdog_setup(char *str)
 {
-	watchdog_user_enabled = 0;
+	watchdog_enabled = 0;
 	return 1;
 }
 __setup("nowatchdog", nowatchdog_setup);
 
-/* deprecated */
 static int __init nosoftlockup_setup(char *str)
 {
-	watchdog_user_enabled = 0;
+	watchdog_enabled &= ~SOFT_WATCHDOG_ENABLED;
 	return 1;
 }
 __setup("nosoftlockup", nosoftlockup_setup);
-/*  */
+
 #ifdef CONFIG_SMP
 static int __init softlockup_all_cpu_backtrace_setup(char *str)
 {
@@ -239,10 +250,11 @@ static int is_softlockup(unsigned long touch_ts)
 {
 	unsigned long now = get_timestamp();
 
-	/* Warn about unreasonable delays: */
-	if (time_after(now, touch_ts + get_softlockup_thresh()))
-		return now - touch_ts;
-
+	if (watchdog_enabled & SOFT_WATCHDOG_ENABLED) {
+		/* Warn about unreasonable delays. */
+		if (time_after(now, touch_ts + get_softlockup_thresh()))
+			return now - touch_ts;
+	}
 	return 0;
 }
 
@@ -477,6 +489,21 @@ static void watchdog(unsigned int cpu)
 	__this_cpu_write(soft_lockup_hrtimer_cnt,
 			 __this_cpu_read(hrtimer_interrupts));
 	__touch_watchdog();
+
+	/*
+	 * watchdog_nmi_enable() clears the NMI_WATCHDOG_ENABLED bit in the
+	 * failure path. Check for failures that can occur asynchronously -
+	 * for example, when CPUs are on-lined - and shut down the hardware
+	 * perf event on each CPU accordingly.
+	 *
+	 * The only non-obvious place this bit can be cleared is through
+	 * watchdog_nmi_enable(), so a pr_info() is placed there.  Placing a
+	 * pr_info here would be too noisy as it would result in a message
+	 * every few seconds if the hardlockup was disabled but the softlockup
+	 * enabled.
+	 */
+	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
+		watchdog_nmi_disable(cpu);
 }
 
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
@@ -492,14 +519,9 @@ static int watchdog_nmi_enable(unsigned int cpu)
 	struct perf_event_attr *wd_attr;
 	struct perf_event *event = per_cpu(watchdog_ev, cpu);
 
-	/*
-	 * Some kernels need to default hard lockup detection to
-	 * 'disabled', for example a guest on a hypervisor.
-	 */
-	if (!watchdog_hardlockup_detector_is_enabled()) {
-		event = ERR_PTR(-ENOENT);
-		goto handle_err;
-	}
+	/* nothing to do if the hard lockup detector is disabled */
+	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
+		goto out;
 
 	/* is it already setup and enabled? */
 	if (event && event->state > PERF_EVENT_STATE_OFF)
@@ -515,7 +537,6 @@ static int watchdog_nmi_enable(unsigned int cpu)
 	/* Try to register using hardware perf events */
 	event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
 
-handle_err:
 	/* save cpu0 error for future comparision */
 	if (cpu == 0 && IS_ERR(event))
 		cpu0_err = PTR_ERR(event);
@@ -527,6 +548,18 @@ handle_err:
 		goto out_save;
 	}
 
+	/*
+	 * Disable the hard lockup detector if _any_ CPU fails to set up
+	 * set up the hardware perf event. The watchdog() function checks
+	 * the NMI_WATCHDOG_ENABLED bit periodically.
+	 *
+	 * The barriers are for syncing up watchdog_enabled across all the
+	 * cpus, as clear_bit() does not use barriers.
+	 */
+	smp_mb__before_atomic();
+	clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled);
+	smp_mb__after_atomic();
+
 	/* skip displaying the same error again */
 	if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
 		return PTR_ERR(event);
@@ -540,6 +573,9 @@ handle_err:
 	else
 		pr_err("disabled (cpu%i): unable to create perf event: %ld\n",
 			cpu, PTR_ERR(event));
+
+	pr_info("Shutting down hard lockup detector on all cpus\n");
+
 	return PTR_ERR(event);
 
 	/* success path */
@@ -628,7 +664,7 @@ static void restart_watchdog_hrtimer(void *info)
 				HRTIMER_MODE_REL_PINNED);
 }
 
-static void update_timers(int cpu)
+static void update_watchdog(int cpu)
 {
 	/*
 	 * Make sure that perf event counter will adopt to a new
@@ -643,17 +679,17 @@ static void update_timers(int cpu)
 	watchdog_nmi_enable(cpu);
 }
 
-static void update_timers_all_cpus(void)
+static void update_watchdog_all_cpus(void)
 {
 	int cpu;
 
 	get_online_cpus();
 	for_each_online_cpu(cpu)
-		update_timers(cpu);
+		update_watchdog(cpu);
 	put_online_cpus();
 }
 
-static int watchdog_enable_all_cpus(bool sample_period_changed)
+static int watchdog_enable_all_cpus(void)
 {
 	int err = 0;
 
@@ -663,8 +699,12 @@ static int watchdog_enable_all_cpus(bool sample_period_changed)
 			pr_err("Failed to create watchdog threads, disabled\n");
 		else
 			watchdog_running = 1;
-	} else if (sample_period_changed) {
-		update_timers_all_cpus();
+	} else {
+		/*
+		 * Enable/disable the lockup detectors or
+		 * change the sample period 'on the fly'.
+		 */
+		update_watchdog_all_cpus();
 	}
 
 	return err;
@@ -682,48 +722,149 @@ static void watchdog_disable_all_cpus(void)
 }
 
 /*
- * proc handler for /proc/sys/kernel/nmi_watchdog,watchdog_thresh
+ * Update the run state of the lockup detectors.
+ */
+static int proc_watchdog_update(void)
+{
+	int err = 0;
+
+	/*
+	 * Watchdog threads won't be started if they are already active.
+	 * The 'watchdog_running' variable in watchdog_*_all_cpus() takes
+	 * care of this. If those threads are already active, the sample
+	 * period will be updated and the lockup detectors will be enabled
+	 * or disabled 'on the fly'.
+	 */
+	if (watchdog_enabled && watchdog_thresh)
+		err = watchdog_enable_all_cpus();
+	else
+		watchdog_disable_all_cpus();
+
+	return err;
+
+}
+
+static DEFINE_MUTEX(watchdog_proc_mutex);
+
+/*
+ * common function for watchdog, nmi_watchdog and soft_watchdog parameter
+ *
+ * caller             | table->data points to | 'which' contains the flag(s)
+ * -------------------|-----------------------|-----------------------------
+ * proc_watchdog      | watchdog_user_enabled | NMI_WATCHDOG_ENABLED or'ed
+ *                    |                       | with SOFT_WATCHDOG_ENABLED
+ * -------------------|-----------------------|-----------------------------
+ * proc_nmi_watchdog  | nmi_watchdog_enabled  | NMI_WATCHDOG_ENABLED
+ * -------------------|-----------------------|-----------------------------
+ * proc_soft_watchdog | soft_watchdog_enabled | SOFT_WATCHDOG_ENABLED
+ */
+static int proc_watchdog_common(int which, struct ctl_table *table, int write,
+				void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	int err, old, new;
+	int *watchdog_param = (int *)table->data;
+
+	mutex_lock(&watchdog_proc_mutex);
+
+	/*
+	 * If the parameter is being read return the state of the corresponding
+	 * bit(s) in 'watchdog_enabled', else update 'watchdog_enabled' and the
+	 * run state of the lockup detectors.
+	 */
+	if (!write) {
+		*watchdog_param = (watchdog_enabled & which) != 0;
+		err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+	} else {
+		err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+		if (err)
+			goto out;
+
+		/*
+		 * There is a race window between fetching the current value
+		 * from 'watchdog_enabled' and storing the new value. During
+		 * this race window, watchdog_nmi_enable() can sneak in and
+		 * clear the NMI_WATCHDOG_ENABLED bit in 'watchdog_enabled'.
+		 * The 'cmpxchg' detects this race and the loop retries.
+		 */
+		do {
+			old = watchdog_enabled;
+			/*
+			 * If the parameter value is not zero set the
+			 * corresponding bit(s), else clear it(them).
+			 */
+			if (*watchdog_param)
+				new = old | which;
+			else
+				new = old & ~which;
+		} while (cmpxchg(&watchdog_enabled, old, new) != old);
+
+		/*
+		 * Update the run state of the lockup detectors.
+		 * Restore 'watchdog_enabled' on failure.
+		 */
+		err = proc_watchdog_update();
+		if (err)
+			watchdog_enabled = old;
+	}
+out:
+	mutex_unlock(&watchdog_proc_mutex);
+	return err;
+}
+
+/*
+ * /proc/sys/kernel/watchdog
+ */
+int proc_watchdog(struct ctl_table *table, int write,
+		  void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	return proc_watchdog_common(NMI_WATCHDOG_ENABLED|SOFT_WATCHDOG_ENABLED,
+				    table, write, buffer, lenp, ppos);
+}
+
+/*
+ * /proc/sys/kernel/nmi_watchdog
  */
+int proc_nmi_watchdog(struct ctl_table *table, int write,
+		      void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	return proc_watchdog_common(NMI_WATCHDOG_ENABLED,
+				    table, write, buffer, lenp, ppos);
+}
+
+/*
+ * /proc/sys/kernel/soft_watchdog
+ */
+int proc_soft_watchdog(struct ctl_table *table, int write,
+			void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	return proc_watchdog_common(SOFT_WATCHDOG_ENABLED,
+				    table, write, buffer, lenp, ppos);
+}
 
-int proc_dowatchdog(struct ctl_table *table, int write,
-		    void __user *buffer, size_t *lenp, loff_t *ppos)
+/*
+ * /proc/sys/kernel/watchdog_thresh
+ */
+int proc_watchdog_thresh(struct ctl_table *table, int write,
+			 void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	int err, old_thresh, old_enabled;
-	bool old_hardlockup;
-	static DEFINE_MUTEX(watchdog_proc_mutex);
+	int err, old;
 
 	mutex_lock(&watchdog_proc_mutex);
-	old_thresh = ACCESS_ONCE(watchdog_thresh);
-	old_enabled = ACCESS_ONCE(watchdog_user_enabled);
-	old_hardlockup = watchdog_hardlockup_detector_is_enabled();
 
+	old = ACCESS_ONCE(watchdog_thresh);
 	err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+
 	if (err || !write)
 		goto out;
 
-	set_sample_period();
 	/*
-	 * Watchdog threads shouldn't be enabled if they are
-	 * disabled. The 'watchdog_running' variable check in
-	 * watchdog_*_all_cpus() function takes care of this.
+	 * Update the sample period.
+	 * Restore 'watchdog_thresh' on failure.
 	 */
-	if (watchdog_user_enabled && watchdog_thresh) {
-		/*
-		 * Prevent a change in watchdog_thresh accidentally overriding
-		 * the enablement of the hardlockup detector.
-		 */
-		if (watchdog_user_enabled != old_enabled)
-			watchdog_enable_hardlockup_detector(true);
-		err = watchdog_enable_all_cpus(old_thresh != watchdog_thresh);
-	} else
-		watchdog_disable_all_cpus();
-
-	/* Restore old values on failure */
-	if (err) {
-		watchdog_thresh = old_thresh;
-		watchdog_user_enabled = old_enabled;
-		watchdog_enable_hardlockup_detector(old_hardlockup);
-	}
+	set_sample_period();
+	err = proc_watchdog_update();
+	if (err)
+		watchdog_thresh = old;
 out:
 	mutex_unlock(&watchdog_proc_mutex);
 	return err;
@@ -734,6 +875,6 @@ void __init lockup_detector_init(void)
 {
 	set_sample_period();
 
-	if (watchdog_user_enabled)
-		watchdog_enable_all_cpus(false);
+	if (watchdog_enabled)
+		watchdog_enable_all_cpus();
 }