diff options
author | Thomas Gleixner <tglx@linutronix.de> | 2020-08-14 13:19:35 +0300 |
---|---|---|
committer | Thomas Gleixner <tglx@linutronix.de> | 2020-08-23 11:38:24 +0300 |
commit | e2d977c9f1abd1d199b412f8f83c1727808b794d (patch) | |
tree | a3e62961cfdea6d7bffe9fc6b64b93f5d4e32e88 /kernel/time/timekeeping.c | |
parent | 71419b30cab099f7ca37e61bf41028d8b7d4984d (diff) | |
download | linux-e2d977c9f1abd1d199b412f8f83c1727808b794d.tar.xz |
timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper
printk wants to store various timestamps (MONOTONIC, REALTIME, BOOTTIME) to
make correlation of dmesg from several systems easier.
Provide an interface to retrieve all three timestamps in one go.
There are some caveats:
1) Boot time and late sleep time injection
Boot time is a racy access on 32bit systems if the sleep time injection
happens late during resume and not in timekeeping_resume(). That could be
avoided by expanding struct tk_read_base with boot offset for 32bit and
adding more overhead to the update. As this is a hard to observe once per
resume event which can be filtered with reasonable effort using the
accurate mono/real timestamps, it's probably not worth the trouble.
Aside of that it might be possible on 32 and 64 bit to observe the
following when the sleep time injection happens late:
CPU 0 CPU 1
timekeeping_resume()
ktime_get_fast_timestamps()
mono, real = __ktime_get_real_fast()
inject_sleep_time()
update boot offset
boot = mono + bootoffset;
That means that boot time already has the sleep time adjustment, but
real time does not. On the next readout both are in sync again.
Preventing this for 64bit is not really feasible without destroying the
careful cache layout of the timekeeper because the sequence count and
struct tk_read_base would then need two cache lines instead of one.
2) Suspend/resume timestamps
Access to the time keeper clock source is disabled accross the innermost
steps of suspend/resume. The accessors still work, but the timestamps
are frozen until time keeping is resumed which happens very early.
For regular suspend/resume there is no observable difference vs. sched
clock, but it might affect some of the nasty low level debug printks.
OTOH, access to sched clock is not guaranteed accross suspend/resume on
all systems either so it depends on the hardware in use.
If that turns out to be a real problem then this could be mitigated by
using sched clock in a similar way as during early boot. But it's not as
trivial as on early boot because it needs some careful protection
against the clock monotonic timestamp jumping backwards on resume.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814115512.159981360@linutronix.de
Diffstat (limited to 'kernel/time/timekeeping.c')
-rw-r--r-- | kernel/time/timekeeping.c | 76 |
1 files changed, 65 insertions, 11 deletions
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 57d064d94cc2..ba7657685e22 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -530,29 +530,29 @@ u64 notrace ktime_get_boot_fast_ns(void) } EXPORT_SYMBOL_GPL(ktime_get_boot_fast_ns); - /* * See comment for __ktime_get_fast_ns() vs. timestamp ordering */ -static __always_inline u64 __ktime_get_real_fast_ns(struct tk_fast *tkf) +static __always_inline u64 __ktime_get_real_fast(struct tk_fast *tkf, u64 *mono) { struct tk_read_base *tkr; + u64 basem, baser, delta; unsigned int seq; - u64 now; do { seq = raw_read_seqcount_latch(&tkf->seq); tkr = tkf->base + (seq & 0x01); - now = ktime_to_ns(tkr->base_real); + basem = ktime_to_ns(tkr->base); + baser = ktime_to_ns(tkr->base_real); - now += timekeeping_delta_to_ns(tkr, - clocksource_delta( - tk_clock_read(tkr), - tkr->cycle_last, - tkr->mask)); + delta = timekeeping_delta_to_ns(tkr, + clocksource_delta(tk_clock_read(tkr), + tkr->cycle_last, tkr->mask)); } while (read_seqcount_retry(&tkf->seq, seq)); - return now; + if (mono) + *mono = basem + delta; + return baser + delta; } /** @@ -560,11 +560,65 @@ static __always_inline u64 __ktime_get_real_fast_ns(struct tk_fast *tkf) */ u64 ktime_get_real_fast_ns(void) { - return __ktime_get_real_fast_ns(&tk_fast_mono); + return __ktime_get_real_fast(&tk_fast_mono, NULL); } EXPORT_SYMBOL_GPL(ktime_get_real_fast_ns); /** + * ktime_get_fast_timestamps: - NMI safe timestamps + * @snapshot: Pointer to timestamp storage + * + * Stores clock monotonic, boottime and realtime timestamps. + * + * Boot time is a racy access on 32bit systems if the sleep time injection + * happens late during resume and not in timekeeping_resume(). That could + * be avoided by expanding struct tk_read_base with boot offset for 32bit + * and adding more overhead to the update. As this is a hard to observe + * once per resume event which can be filtered with reasonable effort using + * the accurate mono/real timestamps, it's probably not worth the trouble. + * + * Aside of that it might be possible on 32 and 64 bit to observe the + * following when the sleep time injection happens late: + * + * CPU 0 CPU 1 + * timekeeping_resume() + * ktime_get_fast_timestamps() + * mono, real = __ktime_get_real_fast() + * inject_sleep_time() + * update boot offset + * boot = mono + bootoffset; + * + * That means that boot time already has the sleep time adjustment, but + * real time does not. On the next readout both are in sync again. + * + * Preventing this for 64bit is not really feasible without destroying the + * careful cache layout of the timekeeper because the sequence count and + * struct tk_read_base would then need two cache lines instead of one. + * + * Access to the time keeper clock source is disabled accross the innermost + * steps of suspend/resume. The accessors still work, but the timestamps + * are frozen until time keeping is resumed which happens very early. + * + * For regular suspend/resume there is no observable difference vs. sched + * clock, but it might affect some of the nasty low level debug printks. + * + * OTOH, access to sched clock is not guaranteed accross suspend/resume on + * all systems either so it depends on the hardware in use. + * + * If that turns out to be a real problem then this could be mitigated by + * using sched clock in a similar way as during early boot. But it's not as + * trivial as on early boot because it needs some careful protection + * against the clock monotonic timestamp jumping backwards on resume. + */ +void ktime_get_fast_timestamps(struct ktime_timestamps *snapshot) +{ + struct timekeeper *tk = &tk_core.timekeeper; + + snapshot->real = __ktime_get_real_fast(&tk_fast_mono, &snapshot->mono); + snapshot->boot = snapshot->mono + ktime_to_ns(data_race(tk->offs_boot)); +} + +/** * halt_fast_timekeeper - Prevent fast timekeeper from accessing clocksource. * @tk: Timekeeper to snapshot. * |