Merge tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "core:
   - Add support for enable attributes to hwmon core
   - Add intrusion templates

  pmbus:
   - Support for Infineon Multi-phase xdpe122 family controllers
   - Support for Intel IMVP9 and AMD 6.25mV modes
   - Support for vid mode detection per page bases
   - Detect if chip is write protected
   - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
     TPS53688
   - Various improvements to ibm-cffps driver

  k10temp:
   - Support for additional temperature sensors as well as voltage and
     current telemetry for Zen CPUs

  w83627ehf:
   - Remove support for NCT6775, NCT6776 (they have their own driver)

  New drivers:
   - ADM1177
   - MAX31730
   - Driver for disk and solid state drives with temperature sensors

  Other:
   - pwm-fan: stop fan on shutdown"

* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (k10temp) Display up to eight sets of CCD temperatures
  hwmon: (k10temp) Add debugfs support
  hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
  hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
  hwmon: (k10temp) Report temperatures per CPU die
  hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
  hwmon: (k10temp) Use bitops
  hwmon: (pwm-fan) stop fan on shutdown
  MAINTAINERS: add entry for ADM1177 driver
  dt-binding: hwmon: Add documentation for ADM1177
  hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  docs: hwmon: Include 'xdpe12284.rst' into docs
  hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
  hwmon: (pmbus/tps53679) Extend device list supported by driver
  hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
  hwmon: (pmbus/core) Add support for vid mode detection per page bases
  hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
  hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
  hwmon: Driver for disk and solid state drives with temperature sensors
  hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
  ...

2 files changed, 33 insertions, 4 deletions

diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h
index 72579168189d..5e609f25878c 100644
--- a/include/linux/hwmon.h
+++ b/include/linux/hwmon.h
@@ -27,6 +27,7 @@ enum hwmon_sensor_types {
 	hwmon_humidity,
 	hwmon_fan,
 	hwmon_pwm,
+	hwmon_intrusion,
 	hwmon_max,
 };
 
@@ -59,7 +60,8 @@ enum hwmon_chip_attributes {
 #define HWMON_C_TEMP_SAMPLES		BIT(hwmon_chip_temp_samples)
 
 enum hwmon_temp_attributes {
-	hwmon_temp_input = 0,
+	hwmon_temp_enable,
+	hwmon_temp_input,
 	hwmon_temp_type,
 	hwmon_temp_lcrit,
 	hwmon_temp_lcrit_hyst,
@@ -85,6 +87,7 @@ enum hwmon_temp_attributes {
 	hwmon_temp_reset_history,
 };
 
+#define HWMON_T_ENABLE		BIT(hwmon_temp_enable)
 #define HWMON_T_INPUT		BIT(hwmon_temp_input)
 #define HWMON_T_TYPE		BIT(hwmon_temp_type)
 #define HWMON_T_LCRIT		BIT(hwmon_temp_lcrit)
@@ -111,6 +114,7 @@ enum hwmon_temp_attributes {
 #define HWMON_T_RESET_HISTORY	BIT(hwmon_temp_reset_history)
 
 enum hwmon_in_attributes {
+	hwmon_in_enable,
 	hwmon_in_input,
 	hwmon_in_min,
 	hwmon_in_max,
@@ -126,9 +130,9 @@ enum hwmon_in_attributes {
 	hwmon_in_max_alarm,
 	hwmon_in_lcrit_alarm,
 	hwmon_in_crit_alarm,
-	hwmon_in_enable,
 };
 
+#define HWMON_I_ENABLE		BIT(hwmon_in_enable)
 #define HWMON_I_INPUT		BIT(hwmon_in_input)
 #define HWMON_I_MIN		BIT(hwmon_in_min)
 #define HWMON_I_MAX		BIT(hwmon_in_max)
@@ -144,9 +148,9 @@ enum hwmon_in_attributes {
 #define HWMON_I_MAX_ALARM	BIT(hwmon_in_max_alarm)
 #define HWMON_I_LCRIT_ALARM	BIT(hwmon_in_lcrit_alarm)
 #define HWMON_I_CRIT_ALARM	BIT(hwmon_in_crit_alarm)
-#define HWMON_I_ENABLE		BIT(hwmon_in_enable)
 
 enum hwmon_curr_attributes {
+	hwmon_curr_enable,
 	hwmon_curr_input,
 	hwmon_curr_min,
 	hwmon_curr_max,
@@ -164,6 +168,7 @@ enum hwmon_curr_attributes {
 	hwmon_curr_crit_alarm,
 };
 
+#define HWMON_C_ENABLE		BIT(hwmon_curr_enable)
 #define HWMON_C_INPUT		BIT(hwmon_curr_input)
 #define HWMON_C_MIN		BIT(hwmon_curr_min)
 #define HWMON_C_MAX		BIT(hwmon_curr_max)
@@ -181,6 +186,7 @@ enum hwmon_curr_attributes {
 #define HWMON_C_CRIT_ALARM	BIT(hwmon_curr_crit_alarm)
 
 enum hwmon_power_attributes {
+	hwmon_power_enable,
 	hwmon_power_average,
 	hwmon_power_average_interval,
 	hwmon_power_average_interval_max,
@@ -211,6 +217,7 @@ enum hwmon_power_attributes {
 	hwmon_power_crit_alarm,
 };
 
+#define HWMON_P_ENABLE			BIT(hwmon_power_enable)
 #define HWMON_P_AVERAGE			BIT(hwmon_power_average)
 #define HWMON_P_AVERAGE_INTERVAL	BIT(hwmon_power_average_interval)
 #define HWMON_P_AVERAGE_INTERVAL_MAX	BIT(hwmon_power_average_interval_max)
@@ -241,14 +248,17 @@ enum hwmon_power_attributes {
 #define HWMON_P_CRIT_ALARM		BIT(hwmon_power_crit_alarm)
 
 enum hwmon_energy_attributes {
+	hwmon_energy_enable,
 	hwmon_energy_input,
 	hwmon_energy_label,
 };
 
+#define HWMON_E_ENABLE			BIT(hwmon_energy_enable)
 #define HWMON_E_INPUT			BIT(hwmon_energy_input)
 #define HWMON_E_LABEL			BIT(hwmon_energy_label)
 
 enum hwmon_humidity_attributes {
+	hwmon_humidity_enable,
 	hwmon_humidity_input,
 	hwmon_humidity_label,
 	hwmon_humidity_min,
@@ -259,6 +269,7 @@ enum hwmon_humidity_attributes {
 	hwmon_humidity_fault,
 };
 
+#define HWMON_H_ENABLE			BIT(hwmon_humidity_enable)
 #define HWMON_H_INPUT			BIT(hwmon_humidity_input)
 #define HWMON_H_LABEL			BIT(hwmon_humidity_label)
 #define HWMON_H_MIN			BIT(hwmon_humidity_min)
@@ -269,6 +280,7 @@ enum hwmon_humidity_attributes {
 #define HWMON_H_FAULT			BIT(hwmon_humidity_fault)
 
 enum hwmon_fan_attributes {
+	hwmon_fan_enable,
 	hwmon_fan_input,
 	hwmon_fan_label,
 	hwmon_fan_min,
@@ -282,6 +294,7 @@ enum hwmon_fan_attributes {
 	hwmon_fan_fault,
 };
 
+#define HWMON_F_ENABLE			BIT(hwmon_fan_enable)
 #define HWMON_F_INPUT			BIT(hwmon_fan_input)
 #define HWMON_F_LABEL			BIT(hwmon_fan_label)
 #define HWMON_F_MIN			BIT(hwmon_fan_min)
@@ -306,6 +319,13 @@ enum hwmon_pwm_attributes {
 #define HWMON_PWM_MODE			BIT(hwmon_pwm_mode)
 #define HWMON_PWM_FREQ			BIT(hwmon_pwm_freq)
 
+enum hwmon_intrusion_attributes {
+	hwmon_intrusion_alarm,
+	hwmon_intrusion_beep,
+};
+#define HWMON_INTRUSION_ALARM		BIT(hwmon_intrusion_alarm)
+#define HWMON_INTRUSION_BEEP		BIT(hwmon_intrusion_beep)
+
 /**
  * struct hwmon_ops - hwmon device operations
  * @is_visible: Callback to return attribute visibility. Mandatory.
diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h
index 08468fca5ea2..1ea5bae708a1 100644
--- a/include/linux/pmbus.h
+++ b/include/linux/pmbus.h
@@ -8,6 +8,8 @@
 #ifndef _PMBUS_H_
 #define _PMBUS_H_
 
+#include <linux/bits.h>
+
 /* flags */
 
 /*
@@ -23,7 +25,14 @@
  * communication errors for no explicable reason. For such chips, checking
  * the status register must be disabled.
  */
-#define PMBUS_SKIP_STATUS_CHECK	(1 << 0)
+#define PMBUS_SKIP_STATUS_CHECK	BIT(0)
+
+/*
+ * PMBUS_WRITE_PROTECTED
+ * Set if the chip is write protected and write protection is not determined
+ * by the standard WRITE_PROTECT command.
+ */
+#define PMBUS_WRITE_PROTECTED	BIT(1)
 
 struct pmbus_platform_data {
 	u32 flags;		/* Device specific flags */