Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND, from Boris:
   - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
     davinci, brcmnand, omap)
   - a huge cleanup/rework of the denali driver accompanied with core
     fixes/improvements to simplify the driver code
   - a complete rewrite of the atmel driver to support new DT bindings
     make future evolution easier
   - the addition of per-vendor detection/initialization steps to avoid
     extending the nand_ids table with more extended-id entries

  SPI NOR, from Cyrille:
   - fixes in the hisi, intel and Mediatek SPI controller drivers
   - fixes to some SPI flash memories not supporting the Chip Erase
     command.
   - add support to some new memory parts (Winbond, Macronix, Micron,
     ESMT).
   - add new driver for the STM32 QSPI controller

  And a few fixes for Gemini and Versatile platforms on physmap-of"

* tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits)
  MAINTAINERS: Update NAND subsystem git repositories
  mtd: nand: gpio: update binding
  mtd: nand: add ooblayout for old hamming layout
  mtd: oxnas_nand: Allocating more than necessary in probe()
  dt-bindings: mtd: Document the STM32 QSPI bindings
  mtd: mtk-nor: set controller's address width according to nor flash
  mtd: spi-nor: add driver for STM32 quad spi flash controller
  mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
  mtd: nand: davinci: add comment on NAND subpage write status on keystone
  mtd: nand: omap2: Fix partition creation via cmdline mtdparts
  mtd: nand: NULL terminate a of_device_id table
  mtd: nand: Fix a couple error codes
  mtd: nand: allow drivers to request minimum alignment for passed buffer
  mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
  mtd: nand: denali: allow to override revision number
  mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
  mtd: nand: denali_dt: remove dma-mask DT property
  mtd: nand: denali: support 64bit capable DMA engine
  mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
  mtd: nand: denali: support HW_ECC_FIXUP capability
  ...

2 files changed, 69 insertions, 29 deletions

diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 79b176eca04a..f8a2ef239c60 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -388,7 +388,7 @@ static inline void mtd_set_of_node(struct mtd_info *mtd,
 
 static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
 {
-	return mtd->dev.of_node;
+	return dev_of_node(&mtd->dev);
 }
 
 static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9591e0fbe5bd..8f67b1581683 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -366,26 +366,6 @@ struct onfi_ext_param_page {
 	 */
 } __packed;
 
-struct nand_onfi_vendor_micron {
-	u8 two_plane_read;
-	u8 read_cache;
-	u8 read_unique_id;
-	u8 dq_imped;
-	u8 dq_imped_num_settings;
-	u8 dq_imped_feat_addr;
-	u8 rb_pulldown_strength;
-	u8 rb_pulldown_strength_feat_addr;
-	u8 rb_pulldown_strength_num_settings;
-	u8 otp_mode;
-	u8 otp_page_start;
-	u8 otp_data_prot_addr;
-	u8 otp_num_pages;
-	u8 otp_feat_addr;
-	u8 read_retry_options;
-	u8 reserved[72];
-	u8 param_revision;
-} __packed;
-
 struct jedec_ecc_info {
 	u8 ecc_bits;
 	u8 codeword_size;
@@ -465,6 +445,17 @@ struct nand_jedec_params {
 } __packed;
 
 /**
+ * struct nand_id - NAND id structure
+ * @data: buffer containing the id bytes. Currently 8 bytes large, but can
+ *	  be extended if required.
+ * @len: ID length.
+ */
+struct nand_id {
+	u8 data[8];
+	int len;
+};
+
+/**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
  * @lock:               protection lock
  * @active:		the mtd device which holds the controller currently
@@ -525,7 +516,7 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc)
  *			out-of-band data).
  * @read_page:	function to read a page according to the ECC generator
  *		requirements; returns maximum number of bitflips corrected in
- *		any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
+ *		any single ECC step, -EIO hw error
  * @read_subpage:	function to read parts of the page covered by ECC;
  *			returns same as read_page()
  * @write_subpage:	function to write parts of the page covered by ECC.
@@ -721,6 +712,20 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
 }
 
 /**
+ * struct nand_manufacturer_ops - NAND Manufacturer operations
+ * @detect: detect the NAND memory organization and capabilities
+ * @init: initialize all vendor specific fields (like the ->read_retry()
+ *	  implementation) if any.
+ * @cleanup: the ->init() function may have allocated resources, ->cleanup()
+ *	     is here to let vendor specific code release those resources.
+ */
+struct nand_manufacturer_ops {
+	void (*detect)(struct nand_chip *chip);
+	int (*init)(struct nand_chip *chip);
+	void (*cleanup)(struct nand_chip *chip);
+};
+
+/**
  * struct nand_chip - NAND Private Flash Chip Data
  * @mtd:		MTD device registered to the MTD framework
  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
@@ -750,6 +755,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
  *			setting the read-retry mode. Mostly needed for MLC NAND.
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
+ * @buf_align:		minimum buffer alignment required by a platform
  * @hwcontrol:		platform-specific hardware control structure
  * @erase:		[REPLACEABLE] erase function
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
@@ -793,6 +799,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
  * @pagebuf_bitflips:	[INTERN] holds the bitflip count for the page which is
  *			currently in data_buf.
  * @subpagesize:	[INTERN] holds the subpagesize
+ * @id:			[INTERN] holds NAND ID
  * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
  *			non 0 if ONFI supported.
  * @jedec_version:	[INTERN] holds the chip JEDEC version (BCD encoded),
@@ -822,7 +829,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
  * @errstat:		[OPTIONAL] hardware specific function to perform
  *			additional error status checks (determine if errors are
  *			correctable).
- * @write_page:		[REPLACEABLE] High-level page write function
+ * @manufacturer:	[INTERN] Contains manufacturer information
  */
 
 struct nand_chip {
@@ -847,9 +854,6 @@ struct nand_chip {
 	int (*scan_bbt)(struct mtd_info *mtd);
 	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
 			int status, int page);
-	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t offset, int data_len, const uint8_t *buf,
-			int oob_required, int page, int cached, int raw);
 	int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
 			int feature_addr, uint8_t *subfeature_para);
 	int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -881,6 +885,7 @@ struct nand_chip {
 	int badblockpos;
 	int badblockbits;
 
+	struct nand_id id;
 	int onfi_version;
 	int jedec_version;
 	union {
@@ -901,6 +906,7 @@ struct nand_chip {
 
 	struct nand_ecc_ctrl ecc;
 	struct nand_buffers *buffers;
+	unsigned long buf_align;
 	struct nand_hw_control hwcontrol;
 
 	uint8_t *bbt;
@@ -910,6 +916,11 @@ struct nand_chip {
 	struct nand_bbt_descr *badblock_pattern;
 
 	void *priv;
+
+	struct {
+		const struct nand_manufacturer *desc;
+		void *priv;
+	} manufacturer;
 };
 
 extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
@@ -946,6 +957,17 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
 	chip->priv = priv;
 }
 
+static inline void nand_set_manufacturer_data(struct nand_chip *chip,
+					      void *priv)
+{
+	chip->manufacturer.priv = priv;
+}
+
+static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
+{
+	return chip->manufacturer.priv;
+}
+
 /*
  * NAND Flash Manufacturer ID Codes
  */
@@ -1049,17 +1071,33 @@ struct nand_flash_dev {
 };
 
 /**
- * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
+ * struct nand_manufacturer - NAND Flash Manufacturer structure
  * @name:	Manufacturer name
  * @id:		manufacturer ID code of device.
+ * @ops:	manufacturer operations
 */
-struct nand_manufacturers {
+struct nand_manufacturer {
 	int id;
 	char *name;
+	const struct nand_manufacturer_ops *ops;
 };
 
+const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+
+static inline const char *
+nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
+{
+	return manufacturer ? manufacturer->name : "Unknown";
+}
+
 extern struct nand_flash_dev nand_flash_ids[];
-extern struct nand_manufacturers nand_manuf_ids[];
+
+extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
+extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
+extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
+extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
+extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
+extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;
 
 int nand_default_bbt(struct mtd_info *mtd);
 int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
@@ -1226,4 +1264,6 @@ int nand_reset(struct nand_chip *chip, int chipnr);
 /* Free resources held by the NAND device */
 void nand_cleanup(struct nand_chip *chip);
 
+/* Default extended ID decoding function */
+void nand_decode_ext_id(struct nand_chip *chip);
 #endif /* __LINUX_MTD_NAND_H */