Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-07-03

Please pull this first batch of wireless updates intended for the
3.17 stream...

For the mac80211 bits, Johannes says:

"The biggest thing here is probably Arik's TDLS rework, beyond that we
have smaller improvements and features like David's scanning IE thing,
Luca's queue work, some CSA work, etc. Also your PID rate control
removal, of course."

For the iwlwifi bits, Emmanuel says:

"I have here a whole bunch of various things. Andy contributes
better debug prints for dvm specific flows and a module parameter to
completely disable power save for dvm. Andrei is sharing the premises
of his work on CSA - more to come. Eran and Liad keep on working
on the new devices. I have the regular amount of BT Coex stuff and
I continue to work on the firmware error report system adding more
debug capabilities. More to come on that subject too."

On top of that, there are some cleanups to the new rsi driver, some
continuing improvements to the rtl818x drivers, and the usual bundles
of updates to ath9k, b43, mwifiex, wil6210, and a few other bits here
and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 235 insertions, 42 deletions

diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 0b3bb16c705a..452286a38b2b 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -6,6 +6,7 @@
 
 #include <linux/bcma/bcma_driver_chipcommon.h>
 #include <linux/bcma/bcma_driver_pci.h>
+#include <linux/bcma/bcma_driver_pcie2.h>
 #include <linux/bcma/bcma_driver_mips.h>
 #include <linux/bcma/bcma_driver_gmac_cmn.h>
 #include <linux/ssb/ssb.h> /* SPROM sharing */
@@ -333,6 +334,7 @@ struct bcma_bus {
 
 	struct bcma_drv_cc drv_cc;
 	struct bcma_drv_pci drv_pci[2];
+	struct bcma_drv_pcie2 drv_pcie2;
 	struct bcma_drv_mips drv_mips;
 	struct bcma_drv_gmac_cmn drv_gmac_cmn;
 
diff --git a/include/linux/bcma/bcma_driver_pcie2.h b/include/linux/bcma/bcma_driver_pcie2.h
new file mode 100644
index 000000000000..5988b05781c3
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -0,0 +1,158 @@
+#ifndef LINUX_BCMA_DRIVER_PCIE2_H_
+#define LINUX_BCMA_DRIVER_PCIE2_H_
+
+#define BCMA_CORE_PCIE2_CLK_CONTROL		0x0000
+#define  PCIE2_CLKC_RST_OE			0x0001 /* When set, drives PCI_RESET out to pin */
+#define  PCIE2_CLKC_RST				0x0002 /* Value driven out to pin */
+#define  PCIE2_CLKC_SPERST			0x0004 /* SurvivePeRst */
+#define  PCIE2_CLKC_DISABLE_L1CLK_GATING	0x0010
+#define  PCIE2_CLKC_DLYPERST			0x0100 /* Delay PeRst to CoE Core */
+#define  PCIE2_CLKC_DISSPROMLD			0x0200 /* DisableSpromLoadOnPerst */
+#define  PCIE2_CLKC_WAKE_MODE_L2		0x1000 /* Wake on L2 */
+#define BCMA_CORE_PCIE2_RC_PM_CONTROL		0x0004
+#define BCMA_CORE_PCIE2_RC_PM_STATUS		0x0008
+#define BCMA_CORE_PCIE2_EP_PM_CONTROL		0x000C
+#define BCMA_CORE_PCIE2_EP_PM_STATUS		0x0010
+#define BCMA_CORE_PCIE2_EP_LTR_CONTROL		0x0014
+#define BCMA_CORE_PCIE2_EP_LTR_STATUS		0x0018
+#define BCMA_CORE_PCIE2_EP_OBFF_STATUS		0x001C
+#define BCMA_CORE_PCIE2_PCIE_ERR_STATUS		0x0020
+#define BCMA_CORE_PCIE2_RC_AXI_CONFIG		0x0100
+#define BCMA_CORE_PCIE2_EP_AXI_CONFIG		0x0104
+#define BCMA_CORE_PCIE2_RXDEBUG_STATUS0		0x0108
+#define BCMA_CORE_PCIE2_RXDEBUG_CONTROL0	0x010C
+#define BCMA_CORE_PCIE2_CONFIGINDADDR		0x0120
+#define BCMA_CORE_PCIE2_CONFIGINDDATA		0x0124
+#define BCMA_CORE_PCIE2_MDIOCONTROL		0x0128
+#define BCMA_CORE_PCIE2_MDIOWRDATA		0x012C
+#define BCMA_CORE_PCIE2_MDIORDDATA		0x0130
+#define BCMA_CORE_PCIE2_DATAINTF		0x0180
+#define BCMA_CORE_PCIE2_D2H_INTRLAZY_0		0x0188
+#define BCMA_CORE_PCIE2_H2D_INTRLAZY_0		0x018c
+#define BCMA_CORE_PCIE2_H2D_INTSTAT_0		0x0190
+#define BCMA_CORE_PCIE2_H2D_INTMASK_0		0x0194
+#define BCMA_CORE_PCIE2_D2H_INTSTAT_0		0x0198
+#define BCMA_CORE_PCIE2_D2H_INTMASK_0		0x019c
+#define BCMA_CORE_PCIE2_LTR_STATE		0x01A0 /* Latency Tolerance Reporting */
+#define  PCIE2_LTR_ACTIVE			2
+#define  PCIE2_LTR_ACTIVE_IDLE			1
+#define  PCIE2_LTR_SLEEP			0
+#define  PCIE2_LTR_FINAL_MASK			0x300
+#define  PCIE2_LTR_FINAL_SHIFT			8
+#define BCMA_CORE_PCIE2_PWR_INT_STATUS		0x01A4
+#define BCMA_CORE_PCIE2_PWR_INT_MASK		0x01A8
+#define BCMA_CORE_PCIE2_CFG_ADDR		0x01F8
+#define BCMA_CORE_PCIE2_CFG_DATA		0x01FC
+#define BCMA_CORE_PCIE2_SYS_EQ_PAGE		0x0200
+#define BCMA_CORE_PCIE2_SYS_MSI_PAGE		0x0204
+#define BCMA_CORE_PCIE2_SYS_MSI_INTREN		0x0208
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL0		0x0210
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL1		0x0214
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL2		0x0218
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL3		0x021C
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL4		0x0220
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL5		0x0224
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD0		0x0250
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL0		0x0254
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD1		0x0258
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL1		0x025C
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD2		0x0260
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL2		0x0264
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD3		0x0268
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL3		0x026C
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD4		0x0270
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL4		0x0274
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD5		0x0278
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL5		0x027C
+#define BCMA_CORE_PCIE2_SYS_RC_INTX_EN		0x0330
+#define BCMA_CORE_PCIE2_SYS_RC_INTX_CSR		0x0334
+#define BCMA_CORE_PCIE2_SYS_MSI_REQ		0x0340
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR_EN	0x0344
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR_CSR	0x0348
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR0		0x0350
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR1		0x0354
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR2		0x0358
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR3		0x035C
+#define BCMA_CORE_PCIE2_SYS_EP_INT_EN0		0x0360
+#define BCMA_CORE_PCIE2_SYS_EP_INT_EN1		0x0364
+#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR0		0x0370
+#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR1		0x0374
+#define BCMA_CORE_PCIE2_SPROM(wordoffset)	(0x0800 + ((wordoffset) * 2))
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_0		0x0C00
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_1		0x0C04
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_2		0x0C08
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_3		0x0C0C
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_4		0x0C10
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_5		0x0C14
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_6		0x0C18
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_7		0x0C1C
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_0		0x0C20
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_1		0x0C24
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_2		0x0C28
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_3		0x0C2C
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_4		0x0C30
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_5		0x0C34
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_6		0x0C38
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_7		0x0C3C
+#define BCMA_CORE_PCIE2_FUNC0_IMAP1		0x0C80
+#define BCMA_CORE_PCIE2_FUNC1_IMAP1		0x0C88
+#define BCMA_CORE_PCIE2_FUNC0_IMAP2		0x0CC0
+#define BCMA_CORE_PCIE2_FUNC1_IMAP2		0x0CC8
+#define BCMA_CORE_PCIE2_IARR0_LOWER		0x0D00
+#define BCMA_CORE_PCIE2_IARR0_UPPER		0x0D04
+#define BCMA_CORE_PCIE2_IARR1_LOWER		0x0D08
+#define BCMA_CORE_PCIE2_IARR1_UPPER		0x0D0C
+#define BCMA_CORE_PCIE2_IARR2_LOWER		0x0D10
+#define BCMA_CORE_PCIE2_IARR2_UPPER		0x0D14
+#define BCMA_CORE_PCIE2_OARR0			0x0D20
+#define BCMA_CORE_PCIE2_OARR1			0x0D28
+#define BCMA_CORE_PCIE2_OARR2			0x0D30
+#define BCMA_CORE_PCIE2_OMAP0_LOWER		0x0D40
+#define BCMA_CORE_PCIE2_OMAP0_UPPER		0x0D44
+#define BCMA_CORE_PCIE2_OMAP1_LOWER		0x0D48
+#define BCMA_CORE_PCIE2_OMAP1_UPPER		0x0D4C
+#define BCMA_CORE_PCIE2_OMAP2_LOWER		0x0D50
+#define BCMA_CORE_PCIE2_OMAP2_UPPER		0x0D54
+#define BCMA_CORE_PCIE2_FUNC1_IARR1_SIZE	0x0D58
+#define BCMA_CORE_PCIE2_FUNC1_IARR2_SIZE	0x0D5C
+#define BCMA_CORE_PCIE2_MEM_CONTROL		0x0F00
+#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG0		0x0F04
+#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG1		0x0F08
+#define BCMA_CORE_PCIE2_LINK_STATUS		0x0F0C
+#define BCMA_CORE_PCIE2_STRAP_STATUS		0x0F10
+#define BCMA_CORE_PCIE2_RESET_STATUS		0x0F14
+#define BCMA_CORE_PCIE2_RESETEN_IN_LINKDOWN	0x0F18
+#define BCMA_CORE_PCIE2_MISC_INTR_EN		0x0F1C
+#define BCMA_CORE_PCIE2_TX_DEBUG_CFG		0x0F20
+#define BCMA_CORE_PCIE2_MISC_CONFIG		0x0F24
+#define BCMA_CORE_PCIE2_MISC_STATUS		0x0F28
+#define BCMA_CORE_PCIE2_INTR_EN			0x0F30
+#define BCMA_CORE_PCIE2_INTR_CLEAR		0x0F34
+#define BCMA_CORE_PCIE2_INTR_STATUS		0x0F38
+
+/* PCIE gen2 config regs */
+#define PCIE2_INTSTATUS				0x090
+#define PCIE2_INTMASK				0x094
+#define PCIE2_SBMBX				0x098
+
+#define PCIE2_PMCR_REFUP			0x1814 /* Trefup time */
+
+#define PCIE2_CAP_DEVSTSCTRL2_OFFSET		0xD4
+#define PCIE2_CAP_DEVSTSCTRL2_LTRENAB		0x400
+#define PCIE2_PVT_REG_PM_CLK_PERIOD		0x184c
+
+struct bcma_drv_pcie2 {
+	struct bcma_device *core;
+};
+
+#define pcie2_read16(pcie2, offset)		bcma_read16((pcie2)->core, offset)
+#define pcie2_read32(pcie2, offset)		bcma_read32((pcie2)->core, offset)
+#define pcie2_write16(pcie2, offset, val)	bcma_write16((pcie2)->core, offset, val)
+#define pcie2_write32(pcie2, offset, val)	bcma_write32((pcie2)->core, offset, val)
+
+#define pcie2_set32(pcie2, offset, set)		bcma_set32((pcie2)->core, offset, set)
+#define pcie2_mask32(pcie2, offset, mask)	bcma_mask32((pcie2)->core, offset, mask)
+
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
+
+#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 6bff13f74050..75d17e15da33 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1621,6 +1621,9 @@ enum ieee80211_reasoncode {
 	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
 	WLAN_REASON_IEEE8021X_FAILED = 23,
 	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
+	/* TDLS (802.11z) */
+	WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE = 25,
+	WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED = 26,
 	/* 802.11e */
 	WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
 	WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e46c437944f7..0a080c4de275 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2266,10 +2266,6 @@ struct cfg80211_qos_map {
  *
  * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
  *
- * @set_ringparam: Set tx and rx ring sizes.
- *
- * @get_ringparam: Get tx and rx ring current and maximum sizes.
- *
  * @tdls_mgmt: Transmit a TDLS management frame.
  * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
  *
@@ -2278,16 +2274,6 @@ struct cfg80211_qos_map {
  *
  * @set_noack_map: Set the NoAck Map for the TIDs.
  *
- * @get_et_sset_count:  Ethtool API to get string-set count.
- *	See @ethtool_ops.get_sset_count
- *
- * @get_et_stats:  Ethtool API to get a set of u64 stats.
- *	See @ethtool_ops.get_ethtool_stats
- *
- * @get_et_strings:  Ethtool API to get a set of strings to describe stats
- *	and perhaps other supported types of ethtool data-sets.
- *	See @ethtool_ops.get_strings
- *
  * @get_channel: Get the current operating channel for the virtual interface.
  *	For monitor interfaces, it should return %NULL unless there's a single
  *	current monitoring channel.
@@ -2315,7 +2301,12 @@ struct cfg80211_qos_map {
  *	reliability. This operation can not fail.
  * @set_coalesce: Set coalesce parameters.
  *
- * @channel_switch: initiate channel-switch procedure (with CSA)
+ * @channel_switch: initiate channel-switch procedure (with CSA). Driver is
+ *	responsible for veryfing if the switch is possible. Since this is
+ *	inherently tricky driver may decide to disconnect an interface later
+ *	with cfg80211_stop_iface(). This doesn't mean driver can accept
+ *	everything. It should do it's best to verify requests and reject them
+ *	as soon as possible.
  *
  * @set_qos_map: Set QoS mapping information to the driver
  *
@@ -2503,10 +2494,6 @@ struct cfg80211_ops {
 	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
 	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
 
-	int	(*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
-	void	(*get_ringparam)(struct wiphy *wiphy,
-				 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
-
 	int	(*sched_scan_start)(struct wiphy *wiphy,
 				struct net_device *dev,
 				struct cfg80211_sched_scan_request *request);
@@ -2518,7 +2505,7 @@ struct cfg80211_ops {
 	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
 			     const u8 *peer, u8 action_code,  u8 dialog_token,
 			     u16 status_code, u32 peer_capability,
-			     const u8 *buf, size_t len);
+			     bool initiator, const u8 *buf, size_t len);
 	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
 			     const u8 *peer, enum nl80211_tdls_operation oper);
 
@@ -2529,13 +2516,6 @@ struct cfg80211_ops {
 				  struct net_device *dev,
 				  u16 noack_map);
 
-	int	(*get_et_sset_count)(struct wiphy *wiphy,
-				     struct net_device *dev, int sset);
-	void	(*get_et_stats)(struct wiphy *wiphy, struct net_device *dev,
-				struct ethtool_stats *stats, u64 *data);
-	void	(*get_et_strings)(struct wiphy *wiphy, struct net_device *dev,
-				  u32 sset, u8 *data);
-
 	int	(*get_channel)(struct wiphy *wiphy,
 			       struct wireless_dev *wdev,
 			       struct cfg80211_chan_def *chandef);
@@ -4843,6 +4823,10 @@ void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev,
  */
 void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy);
 
+
+/* ethtool helper */
+void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 421b6ecb4b2c..9ce5cb17ed82 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -754,20 +754,25 @@ struct ieee80211_tx_info {
 };
 
 /**
- * struct ieee80211_sched_scan_ies - scheduled scan IEs
+ * struct ieee80211_scan_ies - descriptors for different blocks of IEs
  *
- * This structure is used to pass the appropriate IEs to be used in scheduled
- * scans for all bands.  It contains both the IEs passed from the userspace
+ * This structure is used to point to different blocks of IEs in HW scan
+ * and scheduled scan. These blocks contain the IEs passed by userspace
  * and the ones generated by mac80211.
  *
- * @ie: array with the IEs for each supported band
- * @len: array with the total length of the IEs for each band
+ * @ies: pointers to band specific IEs.
+ * @len: lengths of band_specific IEs.
+ * @common_ies: IEs for all bands (especially vendor specific ones)
+ * @common_ie_len: length of the common_ies
  */
-struct ieee80211_sched_scan_ies {
-	u8 *ie[IEEE80211_NUM_BANDS];
+struct ieee80211_scan_ies {
+	const u8 *ies[IEEE80211_NUM_BANDS];
 	size_t len[IEEE80211_NUM_BANDS];
+	const u8 *common_ies;
+	size_t common_ie_len;
 };
 
+
 static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
 {
 	return (struct ieee80211_tx_info *)skb->cb;
@@ -1601,11 +1606,8 @@ struct ieee80211_tx_control {
  *	is not enabled the default action is to disconnect when getting the
  *	CSA frame.
  *
- * @IEEE80211_HW_CHANGE_RUNNING_CHANCTX: The hardware can change a
- *	channel context on-the-fly.  This is needed for channel switch
- *	on single-channel hardware.  It can also be used as an
- *	optimization in certain channel switch cases with
- *	multi-channel.
+ * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands
+ *	in one command, mac80211 doesn't have to run separate scans per band.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1637,7 +1639,8 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
 	IEEE80211_HW_CHANCTX_STA_CSA			= 1<<28,
-	IEEE80211_HW_CHANGE_RUNNING_CHANCTX		= 1<<29,
+	/* bit 29 unused */
+	IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS		= 1<<30,
 };
 
 /**
@@ -1764,6 +1767,19 @@ struct ieee80211_hw {
 };
 
 /**
+ * struct ieee80211_scan_request - hw scan request
+ *
+ * @ies: pointers different parts of IEs (in req.ie)
+ * @req: cfg80211 request.
+ */
+struct ieee80211_scan_request {
+	struct ieee80211_scan_ies ies;
+
+	/* Keep last */
+	struct cfg80211_scan_request req;
+};
+
+/**
  * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
  *
  * @wiphy: the &struct wiphy which we want to query
@@ -2764,6 +2780,15 @@ enum ieee80211_roc_type {
  *	mac80211 will transmit the frame right away.
  *	The callback is optional and can (should!) sleep.
  *
+ * @mgd_protect_tdls_discover: Protect a TDLS discovery session. After sending
+ *	a TDLS discovery-request, we expect a reply to arrive on the AP's
+ *	channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS
+ *	setup-response is a direct packet not buffered by the AP.
+ *	mac80211 will call this function just before the transmission of a TDLS
+ *	discovery-request. The recommended period of protection is at least
+ *	2 * (DTIM period).
+ *	The callback is optional and can sleep.
+ *
  * @add_chanctx: Notifies device driver about new channel context creation.
  * @remove_chanctx: Notifies device driver about channel context destruction.
  * @change_chanctx: Notifies device driver about channel context changes that
@@ -2865,13 +2890,13 @@ struct ieee80211_ops {
 	void (*set_default_unicast_key)(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif, int idx);
 	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-		       struct cfg80211_scan_request *req);
+		       struct ieee80211_scan_request *req);
 	void (*cancel_hw_scan)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif);
 	int (*sched_scan_start)(struct ieee80211_hw *hw,
 				struct ieee80211_vif *vif,
 				struct cfg80211_sched_scan_request *req,
-				struct ieee80211_sched_scan_ies *ies);
+				struct ieee80211_scan_ies *ies);
 	int (*sched_scan_stop)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif);
 	void (*sw_scan_start)(struct ieee80211_hw *hw);
@@ -2981,6 +3006,9 @@ struct ieee80211_ops {
 	void	(*mgd_prepare_tx)(struct ieee80211_hw *hw,
 				  struct ieee80211_vif *vif);
 
+	void	(*mgd_protect_tdls_discover)(struct ieee80211_hw *hw,
+					     struct ieee80211_vif *vif);
+
 	int (*add_chanctx)(struct ieee80211_hw *hw,
 			   struct ieee80211_chanctx_conf *ctx);
 	void (*remove_chanctx)(struct ieee80211_hw *hw,
@@ -4815,4 +4843,17 @@ int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr,
  */
 void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
 
+/**
+ * ieee80211_tdls_oper - request userspace to perform a TDLS operation
+ * @vif: virtual interface
+ * @peer: the peer's destination address
+ * @oper: the requested TDLS operation
+ * @reason_code: reason code for the operation, valid for TDLS teardown
+ * @gfp: allocation flags
+ *
+ * See cfg80211_tdls_oper_request().
+ */
+void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer,
+				 enum nl80211_tdls_operation oper,
+				 u16 reason_code, gfp_t gfp);
 #endif /* MAC80211_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index be9519b52bb1..f1db15b9c041 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1591,6 +1591,9 @@ enum nl80211_commands {
  *	creation then the new interface will be owned by the netlink socket
  *	that created it and will be destroyed when the socket is closed
  *
+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
+ *	the TDLS link initiator.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1931,6 +1934,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_CSA_C_OFFSETS_TX,
 	NL80211_ATTR_MAX_CSA_COUNTERS,
 
+	NL80211_ATTR_TDLS_INITIATOR,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,