Merge tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty/serial driver patchset for 4.11-rc1.

  Not much here, but a lot of little fixes and individual serial driver
  updates all over the subsystem. Majority are for the sh-sci driver and
  platform (the arch-specific changes have acks from the maintainer).

  The start of the "serial bus" code is here as well, but nothing is
  converted to use it yet. That work is still ongoing, hopefully will
  start to show up across different subsystems for 4.12 (bluetooth is
  one major place that will be used.)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits)
  tty: pl011: Work around QDF2400 E44 stuck BUSY bit
  atmel_serial: Use the fractional divider when possible
  tty: Remove extra include in HVC console tty framework
  serial: exar: Enable MSI support
  serial: exar: Move register defines from uapi header to consumer site
  serial: pci: Remove unused pci_boards entries
  serial: exar: Move Commtech adapters to 8250_exar as well
  serial: exar: Fix feature control register constants
  serial: exar: Fix initialization of EXAR registers for ports > 0
  serial: exar: Fix mapping of port I/O resources
  serial: sh-sci: fix hardware RX trigger level setting
  tty/serial: atmel: ensure state is restored after suspending
  serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt
  serdev: ttyport: check whether tty_init_dev() fails
  serial: 8250_pci: make pciserial_detach_ports() static
  ARM: dts: STiH410-b2260: Enable HW flow-control
  ARM: dts: STiH407-family: Use new Pinctrl groups
  ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control
  ARM: dts: STiH410-b2260: Identify the UART RTS line
  dt-bindings: serial: Update 'uart-has-rtscts' description
  ...

7 files changed, 287 insertions, 37 deletions

diff --git a/include/linux/console.h b/include/linux/console.h
index 9c26c6685587..5949d1855589 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -73,6 +73,10 @@ struct consw {
 	u16    *(*con_screen_pos)(struct vc_data *, int);
 	unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
 	/*
+	 * Flush the video console driver's scrollback buffer
+	 */
+	void	(*con_flush_scrollback)(struct vc_data *);
+	/*
 	 * Prepare the console for the debugger.  This includes, but is not
 	 * limited to, unblanking the console, loading an appropriate
 	 * palette, and allowing debugger generated output.
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
new file mode 100644
index 000000000000..9519da6253a8
--- /dev/null
+++ b/include/linux/serdev.h
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _LINUX_SERDEV_H
+#define _LINUX_SERDEV_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+struct serdev_controller;
+struct serdev_device;
+
+/*
+ * serdev device structures
+ */
+
+/**
+ * struct serdev_device_ops - Callback operations for a serdev device
+ * @receive_buf:	Function called with data received from device.
+ * @write_wakeup:	Function called when ready to transmit more data.
+ */
+struct serdev_device_ops {
+	int (*receive_buf)(struct serdev_device *, const unsigned char *, size_t);
+	void (*write_wakeup)(struct serdev_device *);
+};
+
+/**
+ * struct serdev_device - Basic representation of an serdev device
+ * @dev:	Driver model representation of the device.
+ * @nr:		Device number on serdev bus.
+ * @ctrl:	serdev controller managing this device.
+ * @ops:	Device operations.
+ */
+struct serdev_device {
+	struct device dev;
+	int nr;
+	struct serdev_controller *ctrl;
+	const struct serdev_device_ops *ops;
+};
+
+static inline struct serdev_device *to_serdev_device(struct device *d)
+{
+	return container_of(d, struct serdev_device, dev);
+}
+
+/**
+ * struct serdev_device_driver - serdev slave device driver
+ * @driver:	serdev device drivers should initialize name field of this
+ *		structure.
+ * @probe:	binds this driver to a serdev device.
+ * @remove:	unbinds this driver from the serdev device.
+ */
+struct serdev_device_driver {
+	struct device_driver driver;
+	int	(*probe)(struct serdev_device *);
+	void	(*remove)(struct serdev_device *);
+};
+
+static inline struct serdev_device_driver *to_serdev_device_driver(struct device_driver *d)
+{
+	return container_of(d, struct serdev_device_driver, driver);
+}
+
+/*
+ * serdev controller structures
+ */
+struct serdev_controller_ops {
+	int (*write_buf)(struct serdev_controller *, const unsigned char *, size_t);
+	void (*write_flush)(struct serdev_controller *);
+	int (*write_room)(struct serdev_controller *);
+	int (*open)(struct serdev_controller *);
+	void (*close)(struct serdev_controller *);
+	void (*set_flow_control)(struct serdev_controller *, bool);
+	unsigned int (*set_baudrate)(struct serdev_controller *, unsigned int);
+};
+
+/**
+ * struct serdev_controller - interface to the serdev controller
+ * @dev:	Driver model representation of the device.
+ * @nr:		number identifier for this controller/bus.
+ * @serdev:	Pointer to slave device for this controller.
+ * @ops:	Controller operations.
+ */
+struct serdev_controller {
+	struct device		dev;
+	unsigned int		nr;
+	struct serdev_device	*serdev;
+	const struct serdev_controller_ops *ops;
+};
+
+static inline struct serdev_controller *to_serdev_controller(struct device *d)
+{
+	return container_of(d, struct serdev_controller, dev);
+}
+
+static inline void *serdev_device_get_drvdata(const struct serdev_device *serdev)
+{
+	return dev_get_drvdata(&serdev->dev);
+}
+
+static inline void serdev_device_set_drvdata(struct serdev_device *serdev, void *data)
+{
+	dev_set_drvdata(&serdev->dev, data);
+}
+
+/**
+ * serdev_device_put() - decrement serdev device refcount
+ * @serdev	serdev device.
+ */
+static inline void serdev_device_put(struct serdev_device *serdev)
+{
+	if (serdev)
+		put_device(&serdev->dev);
+}
+
+static inline void serdev_device_set_client_ops(struct serdev_device *serdev,
+					      const struct serdev_device_ops *ops)
+{
+	serdev->ops = ops;
+}
+
+static inline
+void *serdev_controller_get_drvdata(const struct serdev_controller *ctrl)
+{
+	return ctrl ? dev_get_drvdata(&ctrl->dev) : NULL;
+}
+
+static inline void serdev_controller_set_drvdata(struct serdev_controller *ctrl,
+					       void *data)
+{
+	dev_set_drvdata(&ctrl->dev, data);
+}
+
+/**
+ * serdev_controller_put() - decrement controller refcount
+ * @ctrl	serdev controller.
+ */
+static inline void serdev_controller_put(struct serdev_controller *ctrl)
+{
+	if (ctrl)
+		put_device(&ctrl->dev);
+}
+
+struct serdev_device *serdev_device_alloc(struct serdev_controller *);
+int serdev_device_add(struct serdev_device *);
+void serdev_device_remove(struct serdev_device *);
+
+struct serdev_controller *serdev_controller_alloc(struct device *, size_t);
+int serdev_controller_add(struct serdev_controller *);
+void serdev_controller_remove(struct serdev_controller *);
+
+static inline void serdev_controller_write_wakeup(struct serdev_controller *ctrl)
+{
+	struct serdev_device *serdev = ctrl->serdev;
+
+	if (!serdev || !serdev->ops->write_wakeup)
+		return;
+
+	serdev->ops->write_wakeup(ctrl->serdev);
+}
+
+static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
+					      const unsigned char *data,
+					      size_t count)
+{
+	struct serdev_device *serdev = ctrl->serdev;
+
+	if (!serdev || !serdev->ops->receive_buf)
+		return -EINVAL;
+
+	return serdev->ops->receive_buf(ctrl->serdev, data, count);
+}
+
+#if IS_ENABLED(CONFIG_SERIAL_DEV_BUS)
+
+int serdev_device_open(struct serdev_device *);
+void serdev_device_close(struct serdev_device *);
+unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
+void serdev_device_set_flow_control(struct serdev_device *, bool);
+int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
+void serdev_device_write_flush(struct serdev_device *);
+int serdev_device_write_room(struct serdev_device *);
+
+/*
+ * serdev device driver functions
+ */
+int __serdev_device_driver_register(struct serdev_device_driver *, struct module *);
+#define serdev_device_driver_register(sdrv) \
+	__serdev_device_driver_register(sdrv, THIS_MODULE)
+
+/**
+ * serdev_device_driver_unregister() - unregister an serdev client driver
+ * @sdrv:	the driver to unregister
+ */
+static inline void serdev_device_driver_unregister(struct serdev_device_driver *sdrv)
+{
+	if (sdrv)
+		driver_unregister(&sdrv->driver);
+}
+
+#define module_serdev_device_driver(__serdev_device_driver) \
+	module_driver(__serdev_device_driver, serdev_device_driver_register, \
+			serdev_device_driver_unregister)
+
+#else
+
+static inline int serdev_device_open(struct serdev_device *sdev)
+{
+	return -ENODEV;
+}
+static inline void serdev_device_close(struct serdev_device *sdev) {}
+static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev, unsigned int baudrate)
+{
+	return 0;
+}
+static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
+static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count)
+{
+	return -ENODEV;
+}
+static inline void serdev_device_write_flush(struct serdev_device *sdev) {}
+static inline int serdev_device_write_room(struct serdev_device *sdev)
+{
+	return 0;
+}
+
+#define serdev_device_driver_register(x)
+#define serdev_device_driver_unregister(x)
+
+#endif /* CONFIG_SERIAL_DEV_BUS */
+
+/*
+ * serdev hooks into TTY core
+ */
+struct tty_port;
+struct tty_driver;
+
+#ifdef CONFIG_SERIAL_DEV_CTRL_TTYPORT
+struct device *serdev_tty_port_register(struct tty_port *port,
+					struct device *parent,
+					struct tty_driver *drv, int idx);
+void serdev_tty_port_unregister(struct tty_port *port);
+#else
+static inline struct device *serdev_tty_port_register(struct tty_port *port,
+					   struct device *parent,
+					   struct tty_driver *drv, int idx)
+{
+	return ERR_PTR(-ENODEV);
+}
+static inline void serdev_tty_port_unregister(struct tty_port *port) {}
+#endif /* CONFIG_SERIAL_DEV_CTRL_TTYPORT */
+
+#endif /*_LINUX_SERDEV_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 5def8e830fb0..58484fb35cc8 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -450,7 +450,7 @@ extern void uart_handle_cts_change(struct uart_port *uport,
 extern void uart_insert_char(struct uart_port *port, unsigned int status,
 		 unsigned int overrun, unsigned int ch, unsigned int flag);
 
-#ifdef SUPPORT_SYSRQ
+#if defined(SUPPORT_SYSRQ) && defined(CONFIG_MAGIC_SYSRQ_SERIAL)
 static inline int
 uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
 {
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 9f2bfd055742..e598eaef3962 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -9,8 +9,6 @@
  * Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts)
  */
 
-#define SCIx_NOT_SUPPORTED	(-1)
-
 /* Serial Control Register (@ = not supported by all parts) */
 #define SCSCR_TIE	BIT(7)	/* Transmit Interrupt Enable */
 #define SCSCR_RIE	BIT(6)	/* Receive Interrupt Enable */
@@ -41,24 +39,16 @@ enum {
 	SCIx_NR_REGTYPES,
 };
 
-struct device;
-
 struct plat_sci_port_ops {
 	void (*init_pins)(struct uart_port *, unsigned int cflag);
 };
 
 /*
- * Port-specific capabilities
- */
-#define SCIx_HAVE_RTSCTS	BIT(0)
-
-/*
  * Platform device specific platform_data struct
  */
 struct plat_sci_port {
 	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
-	unsigned long	capabilities;		/* Port features/capabilities */
 
 	unsigned int	sampling_rate;
 	unsigned int	scscr;			/* SCSCR initialization */
@@ -66,14 +56,9 @@ struct plat_sci_port {
 	/*
 	 * Platform overrides if necessary, defaults otherwise.
 	 */
-	int		port_reg;
-	unsigned char	regshift;
 	unsigned char	regtype;
 
 	struct plat_sci_port_ops	*ops;
-
-	unsigned int	dma_slave_tx;
-	unsigned int	dma_slave_rx;
 };
 
 #endif /* __LINUX_SERIAL_SCI_H */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 40144f382516..1017e904c0a3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -217,12 +217,18 @@ struct tty_port_operations {
 	/* Called on the final put of a port */
 	void (*destruct)(struct tty_port *port);
 };
-	
+
+struct tty_port_client_operations {
+	int (*receive_buf)(struct tty_port *port, const unsigned char *, const unsigned char *, size_t);
+	void (*write_wakeup)(struct tty_port *port);
+};
+
 struct tty_port {
 	struct tty_bufhead	buf;		/* Locked internally */
 	struct tty_struct	*tty;		/* Back pointer */
 	struct tty_struct	*itty;		/* internal back ptr */
 	const struct tty_port_operations *ops;	/* Port operations */
+	const struct tty_port_client_operations *client_ops; /* Port client operations */
 	spinlock_t		lock;		/* Lock protecting tty field */
 	int			blocked_open;	/* Waiting to open */
 	int			count;		/* Usage count */
@@ -241,6 +247,7 @@ struct tty_port {
 						   based drain is needed else
 						   set to size of fifo */
 	struct kref		kref;		/* Ref counter */
+	void 			*client_data;
 };
 
 /* tty_port::iflags bits -- use atomic bit ops */
@@ -528,6 +535,7 @@ extern int tty_alloc_file(struct file *file);
 extern void tty_add_file(struct tty_struct *tty, struct file *file);
 extern void tty_free_file(struct file *file);
 extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
+extern void tty_release_struct(struct tty_struct *tty, int idx);
 extern int tty_release(struct inode *inode, struct file *filp);
 extern void tty_init_termios(struct tty_struct *tty);
 extern int tty_standard_install(struct tty_driver *driver,
@@ -656,7 +664,7 @@ extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
 extern void tty_ldisc_release(struct tty_struct *tty);
 extern void tty_ldisc_init(struct tty_struct *tty);
 extern void tty_ldisc_deinit(struct tty_struct *tty);
-extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
+extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p,
 				 char *f, int count);
 
 /* n_tty.c */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 99dbed8a8874..9ec741b133fe 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -56,7 +56,8 @@
 #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
 #define PORT_RT2880	29	/* Ralink RT2880 internal UART */
 #define PORT_16550A_FSL64 30	/* Freescale 16550 UART with 64 FIFOs */
-#define PORT_MAX_8250	30	/* max port ID */
+#define PORT_DA830	31	/* TI DA8xx/66AK2x */
+#define PORT_MAX_8250	31	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index b4c04842a8c0..5db76880b4ad 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -327,6 +327,14 @@
 #define SERIAL_RSA_BAUD_BASE (921600)
 #define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
 
+/* Extra registers for TI DA8xx/66AK2x */
+#define UART_DA830_PWREMU_MGMT	12
+
+/* PWREMU_MGMT register bits */
+#define UART_DA830_PWREMU_MGMT_FREE	(1 << 0)  /* Free-running mode */
+#define UART_DA830_PWREMU_MGMT_URRST	(1 << 13) /* Receiver reset/enable */
+#define UART_DA830_PWREMU_MGMT_UTRST	(1 << 14) /* Transmitter reset/enable */
+
 /*
  * Extra serial register definitions for the internal UARTs
  * in TI OMAP processors.
@@ -359,24 +367,6 @@
 #define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
 
 /*
- * These are definitions for the Exar XR17V35X and XR17(C|D)15X
- */
-#define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
-#define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
-#define UART_EXAR_DVID		0x8d	/* Device identification */
-
-#define UART_EXAR_FCTR		0x08	/* Feature Control Register */
-#define UART_FCTR_EXAR_IRDA	0x08	/* IrDa data encode select */
-#define UART_FCTR_EXAR_485	0x10	/* Auto 485 half duplex dir ctl */
-#define UART_FCTR_EXAR_TRGA	0x00	/* FIFO trigger table A */
-#define UART_FCTR_EXAR_TRGB	0x60	/* FIFO trigger table B */
-#define UART_FCTR_EXAR_TRGC	0x80	/* FIFO trigger table C */
-#define UART_FCTR_EXAR_TRGD	0xc0	/* FIFO trigger table D programmable */
-
-#define UART_EXAR_TXTRG		0x0a	/* Tx FIFO trigger level write-only */
-#define UART_EXAR_RXTRG		0x0b	/* Rx FIFO trigger level write-only */
-
-/*
  * These are definitions for the Altera ALTR_16550_F32/F64/F128
  * Normalized from 0x100 to 0x40 because of shift by 2 (32 bit regs).
  */