Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers

Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
 "The patches contained herein do the following:

 (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI.  I checked
     this with Paul Mackerras before I created the patch and he suggested some
     extra bits to unexport.

 (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
     applicable, and remove from the UAPI that part of linux/fs.h that was the
     reason for linux/blk_types.h being exported in the first place.  I
     discussed this with Jens Axboe before creating the patch.

 (3) The big patch of the series to disintegrate include/linux/*.h as a unit.
     This could be split up, though there would be collisions in moving stuff
     between the two Kbuild files when the parts are merged as that file is
     sorted alphabetically rather than being grouped by subsystem.

     Of this set of headers, 17 files have changed in the UAPI exported region
     since the 4th and only 8 since the 9th so there isn't much change in this
     area - as one might expect.

     It should be pretty obvious and straightforward if it does come to fixing
     up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
     to the same file in the include/uapi/linux/ directory.

     If a new file appears then things get a bit more complicated as the
     "headers +=" line has to move to include/uapi/linux/Kbuild.  Only one new
     file has appeared since the 9th and I judge this type of event relatively
     unlikely.

 (4) A patch to disintegrate include/linux/byteorder/*.h as a unit.

  Signed-off-by: David Howells <dhowells@redhat.com>"

* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h

1 files changed, 103 insertions, 0 deletions

diff --git a/include/uapi/linux/ultrasound.h b/include/uapi/linux/ultrasound.h
new file mode 100644
index 000000000000..71339dc531c5
--- /dev/null
+++ b/include/uapi/linux/ultrasound.h
@@ -0,0 +1,103 @@
+#ifndef _ULTRASOUND_H_
+#define _ULTRASOUND_H_
+/*
+ *	ultrasound.h - Macros for programming the Gravis Ultrasound
+ *			These macros are extremely device dependent
+ *			and not portable.
+ */
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ */
+
+
+/*
+ *	Private events for Gravis Ultrasound (GUS)
+ *
+ *	Format:
+ *		byte 0 		- SEQ_PRIVATE (0xfe)
+ *		byte 1 		- Synthesizer device number (0-N)
+ *		byte 2 		- Command (see below)
+ *		byte 3 		- Voice number (0-31)
+ *		bytes 4 and 5	- parameter P1 (unsigned short)
+ *		bytes 6 and 7	- parameter P2 (unsigned short)
+ *
+ *	Commands:
+ *		Each command affects one voice defined in byte 3.
+ *		Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
+ *		_GUS_NUMVOICES	- Sets max. number of concurrent voices (P1=14-31, default 16)
+ *		_GUS_VOICESAMPLE- ************ OBSOLETE *************
+ *		_GUS_VOICEON	- Starts voice (P1=voice mode)
+ *		_GUS_VOICEOFF	- Stops voice (no parameters)
+ *		_GUS_VOICEFADE	- Stops the voice smoothly.
+ *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
+ *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *				  (Like GUS_VOICEVOL but doesn't change the hw
+ *				  volume. It just updates volume in the voice table).
+ *
+ *		_GUS_RAMPRANGE	- Sets limits for volume ramping (P1=low volume, P2=high volume)
+ *		_GUS_RAMPRATE	- Sets the speed for volume ramping (P1=scale, P2=rate)
+ *		_GUS_RAMPMODE	- Sets the volume ramping mode (P1=ramping mode)
+ *		_GUS_RAMPON	- Starts volume ramping (no parameters)
+ *		_GUS_RAMPOFF	- Stops volume ramping (no parameters)
+ *		_GUS_VOLUME_SCALE - Changes the volume calculation constants
+ *				  for all voices.
+ */
+
+#define _GUS_NUMVOICES		0x00
+#define _GUS_VOICESAMPLE	0x01	/* OBSOLETE */
+#define _GUS_VOICEON		0x02
+#define _GUS_VOICEOFF		0x03
+#define _GUS_VOICEMODE		0x04
+#define _GUS_VOICEBALA		0x05
+#define _GUS_VOICEFREQ		0x06
+#define _GUS_VOICEVOL		0x07
+#define _GUS_RAMPRANGE		0x08
+#define _GUS_RAMPRATE		0x09
+#define _GUS_RAMPMODE		0x0a
+#define _GUS_RAMPON		0x0b
+#define _GUS_RAMPOFF		0x0c
+#define _GUS_VOICEFADE		0x0d
+#define _GUS_VOLUME_SCALE	0x0e
+#define _GUS_VOICEVOL2		0x0f
+#define _GUS_VOICE_POS		0x10
+
+/*
+ *	GUS API macros
+ */
+
+#define _GUS_CMD(chn, voice, cmd, p1, p2) \
+					{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
+					_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
+					_seqbuf[_seqbufptr+3] = voice;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
+					_SEQ_ADVBUF(8);}
+
+#define GUS_NUMVOICES(chn, p1)			_GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
+#define GUS_VOICESAMPLE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0)	/* OBSOLETE */
+#define GUS_VOICEON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
+#define GUS_VOICEOFF(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
+#define GUS_VOICEFADE(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
+#define GUS_VOICEMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
+#define GUS_VOICEBALA(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
+#define GUS_VOICEFREQ(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+#define GUS_VOICEVOL(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
+#define GUS_VOICEVOL2(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
+#define GUS_RAMPRANGE(chn, voice, low, high)	_GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
+#define GUS_RAMPRATE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
+#define GUS_RAMPMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
+#define GUS_RAMPON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
+#define GUS_RAMPOFF(chn, voice)			_GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
+#define GUS_VOLUME_SCALE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
+#define GUS_VOICE_POS(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICE_POS, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+
+#endif