Merge branch 'topic/asoc' into for-linus

Conflicts:
	sound/soc/codecs/ad1938.c

10 files changed, 485 insertions, 21 deletions

diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 0a0b019d41ad..377693a14385 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -182,6 +182,12 @@ struct snd_soc_dai_ops {
 		struct snd_soc_dai *);
 	int (*trigger)(struct snd_pcm_substream *, int,
 		struct snd_soc_dai *);
+	/*
+	 * For hardware based FIFO caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
 };
 
 /*
@@ -215,7 +221,6 @@ struct snd_soc_dai {
 	unsigned int symmetric_rates:1;
 
 	/* DAI runtime info */
-	struct snd_pcm_runtime *runtime;
 	struct snd_soc_codec *codec;
 	unsigned int active;
 	unsigned char pop_wait:1;
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index c0922a034223..66ff4c124dbd 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -339,6 +339,9 @@ int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin);
 int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin);
 int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin);
 int snd_soc_dapm_sync(struct snd_soc_codec *codec);
+int snd_soc_dapm_force_enable_pin(struct snd_soc_codec *codec,
+				  const char *pin);
+int snd_soc_dapm_ignore_suspend(struct snd_soc_codec *codec, const char *pin);
 
 /* dapm widget types */
 enum snd_soc_dapm_type {
@@ -425,9 +428,8 @@ struct snd_soc_dapm_widget {
 	unsigned char connected:1;		/* connected codec pin */
 	unsigned char new:1;			/* cnew complete */
 	unsigned char ext:1;			/* has external widgets */
-	unsigned char muted:1;			/* muted for pop reduction */
-	unsigned char suspend:1;		/* was active before suspend */
-	unsigned char pmdown:1;			/* waiting for timeout */
+	unsigned char force:1;			/* force state */
+	unsigned char ignore_suspend:1;         /* kept enabled over suspend */
 
 	int (*power_check)(struct snd_soc_dapm_widget *w);
 
diff --git a/include/sound/soc.h b/include/sound/soc.h
index a57fbfcd4c8f..697e7ffe39d7 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -15,6 +15,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/types.h>
+#include <linux/notifier.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -29,10 +30,10 @@
 #define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
 	((unsigned long)&(struct soc_mixer_control) \
 	{.reg = xreg, .shift = xshift, .rshift = xshift, .max = xmax, \
-	.invert = xinvert})
+	.platform_max = xmax, .invert = xinvert})
 #define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \
 	((unsigned long)&(struct soc_mixer_control) \
-	{.reg = xreg, .max = xmax, .invert = xinvert})
+	{.reg = xreg, .max = xmax, .platform_max = xmax, .invert = xinvert})
 #define SOC_SINGLE(xname, reg, shift, max, invert) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
@@ -52,14 +53,14 @@
 	.put = snd_soc_put_volsw, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
-		 .max = xmax, .invert = xinvert} }
+		 .max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_DOUBLE_R(xname, reg_left, reg_right, xshift, xmax, xinvert) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
 	.info = snd_soc_info_volsw_2r, \
 	.get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
-		.max = xmax, .invert = xinvert} }
+		.max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_DOUBLE_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
@@ -69,7 +70,7 @@
 	.put = snd_soc_put_volsw, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = xreg, .shift = shift_left, .rshift = shift_right,\
-		 .max = xmax, .invert = xinvert} }
+		 .max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
@@ -79,7 +80,7 @@
 	.get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
-		.max = xmax, .invert = xinvert} }
+		.max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_DOUBLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \
 {	.iface  = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
@@ -88,7 +89,8 @@
 	.info   = snd_soc_info_volsw_s8, .get = snd_soc_get_volsw_s8, \
 	.put    = snd_soc_put_volsw_s8, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = xreg, .min = xmin, .max = xmax} }
+		{.reg = xreg, .min = xmin, .max = xmax, \
+		 .platform_max = xmax} }
 #define SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmax, xtexts) \
 {	.reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
 	.max = xmax, .texts = xtexts }
@@ -125,7 +127,7 @@
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
-		 .max = xmax, .invert = xinvert} }
+		 .max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -145,7 +147,7 @@
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
-		.max = xmax, .invert = xinvert} }
+		.max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
@@ -156,7 +158,7 @@
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = (unsigned long)&(struct soc_mixer_control) \
 		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
-		.max = xmax, .invert = xinvert} }
+		.max = xmax, .platform_max = xmax, .invert = xinvert} }
 #define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_bool_ext, \
@@ -212,6 +214,7 @@ struct snd_soc_dai_mode;
 struct snd_soc_pcm_runtime;
 struct snd_soc_dai;
 struct snd_soc_platform;
+struct snd_soc_dai_link;
 struct snd_soc_codec;
 struct soc_enum;
 struct snd_soc_ac97_ops;
@@ -260,6 +263,10 @@ int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type,
 void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
 int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
 			  struct snd_soc_jack_pin *pins);
+void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
+				    struct notifier_block *nb);
+void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
+				      struct notifier_block *nb);
 #ifdef CONFIG_GPIOLIB
 int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
@@ -320,6 +327,8 @@ int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_limit_volume(struct snd_soc_codec *codec,
+	const char *name, int max);
 
 /**
  * struct snd_soc_jack_pin - Describes a pin to update based on jack detection
@@ -363,6 +372,7 @@ struct snd_soc_jack {
 	struct snd_soc_card *card;
 	struct list_head pins;
 	int status;
+	struct blocking_notifier_head notifier;
 };
 
 /* SoC PCM stream information */
@@ -374,7 +384,7 @@ struct snd_soc_pcm_stream {
 	unsigned int rate_max;		/* max rate */
 	unsigned int channels_min;	/* min channels */
 	unsigned int channels_max;	/* max channels */
-	unsigned int active:1;		/* stream is in use */
+	unsigned int active;		/* stream is in use */
 	void *dma_data;			/* used by platform code */
 };
 
@@ -407,7 +417,7 @@ struct snd_soc_codec {
 	struct snd_ac97 *ac97;  /* for ad-hoc ac97 devices */
 	unsigned int active;
 	unsigned int pcm_devs;
-	void *private_data;
+	void *drvdata;
 
 	/* codec IO */
 	void *control_data; /* codec control (i2c/3wire) data */
@@ -462,14 +472,21 @@ struct snd_soc_platform {
 
 	int (*probe)(struct platform_device *pdev);
 	int (*remove)(struct platform_device *pdev);
-	int (*suspend)(struct snd_soc_dai *dai);
-	int (*resume)(struct snd_soc_dai *dai);
+	int (*suspend)(struct snd_soc_dai_link *dai_link);
+	int (*resume)(struct snd_soc_dai_link *dai_link);
 
 	/* pcm creation and destruction */
 	int (*pcm_new)(struct snd_card *, struct snd_soc_dai *,
 		struct snd_pcm *);
 	void (*pcm_free)(struct snd_pcm *);
 
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
 	/* platform stream ops */
 	struct snd_pcm_ops *pcm_ops;
 };
@@ -489,6 +506,9 @@ struct snd_soc_dai_link  {
 	/* codec/machine specific init - e.g. add machine controls */
 	int (*init)(struct snd_soc_codec *codec);
 
+	/* Keep DAI active over suspend */
+	unsigned int ignore_suspend:1;
+
 	/* Symmetry requirements */
 	unsigned int symmetric_rates:1;
 
@@ -553,7 +573,7 @@ struct snd_soc_pcm_runtime {
 
 /* mixer control */
 struct soc_mixer_control {
-	int min, max;
+	int min, max, platform_max;
 	unsigned int reg, rreg, shift, rshift, invert;
 };
 
@@ -583,6 +603,17 @@ static inline unsigned int snd_soc_write(struct snd_soc_codec *codec,
 	return codec->write(codec, reg, val);
 }
 
+static inline void snd_soc_codec_set_drvdata(struct snd_soc_codec *codec,
+					     void *data)
+{
+	codec->drvdata = data;
+}
+
+static inline void *snd_soc_codec_get_drvdata(struct snd_soc_codec *codec)
+{
+	return codec->drvdata;
+}
+
 #include <sound/soc-dai.h>
 
 #endif
diff --git a/include/sound/tlv320aic3x.h b/include/sound/tlv320aic3x.h
new file mode 100644
index 000000000000..b1a5f34e5cfa
--- /dev/null
+++ b/include/sound/tlv320aic3x.h
@@ -0,0 +1,17 @@
+/*
+ * Platform data for Texas Instruments TLV320AIC3x codec
+ *
+ * Author: Jarkko Nikula <jhnikula@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __TLV320AIC3x_H__
+#define __TLV320AIC3x_H__
+
+struct aic3x_pdata {
+	int gpio_reset; /* < 0 if not used */
+};
+
+#endif
\ No newline at end of file
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h
index ac0665264bdf..3f428d53195b 100644
--- a/include/sound/tlv320dac33-plat.h
+++ b/include/sound/tlv320dac33-plat.h
@@ -15,6 +15,7 @@
 
 struct tlv320dac33_platform_data {
 	int power_gpio;
+	int keep_bclk;	/* Keep the BCLK running in FIFO modes */
 	u8 burst_bclkdiv;
 };
 
diff --git a/include/sound/uda134x.h b/include/sound/uda134x.h
index 475ef8bb7dcd..509efb050176 100644
--- a/include/sound/uda134x.h
+++ b/include/sound/uda134x.h
@@ -21,6 +21,7 @@ struct uda134x_platform_data {
 #define UDA134X_UDA1340 1
 #define UDA134X_UDA1341 2
 #define UDA134X_UDA1344 3
+#define UDA134X_UDA1345 4
 };
 
 #endif /* _UDA134X_H */
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
new file mode 100644
index 000000000000..b4a0db2307ef
--- /dev/null
+++ b/include/sound/wm8903.h
@@ -0,0 +1,249 @@
+/*
+ * linux/sound/wm8903.h -- Platform data for WM8903
+ *
+ * Copyright 2010 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8903_H
+#define __LINUX_SND_WM8903_H
+
+/* Used to enable configuration of a GPIO to all zeros */
+#define WM8903_GPIO_NO_CONFIG 0x8000
+
+/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8903_MICDET_HYST_ENA                  0x0080  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_MASK             0x0080  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_SHIFT                 7  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_WIDTH                 1  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_THR_MASK                  0x0070  /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_WIDTH                      3  /* MICDET_THR - [6:4] */
+#define WM8903_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICDET_ENA                       0x0002  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_MASK                  0x0002  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_SHIFT                      1  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_WIDTH                      1  /* MICDET_ENA */
+#define WM8903_MICBIAS_ENA                      0x0001  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_MASK                 0x0001  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_SHIFT                     0  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_WIDTH                     1  /* MICBIAS_ENA */
+
+/*
+ * R116 (0x74) - GPIO Control 1
+ */
+#define WM8903_GP1_FN_MASK                      0x1F00  /* GP1_FN - [12:8] */
+#define WM8903_GP1_FN_SHIFT                          8  /* GP1_FN - [12:8] */
+#define WM8903_GP1_FN_WIDTH                          5  /* GP1_FN - [12:8] */
+#define WM8903_GP1_DIR                          0x0080  /* GP1_DIR */
+#define WM8903_GP1_DIR_MASK                     0x0080  /* GP1_DIR */
+#define WM8903_GP1_DIR_SHIFT                         7  /* GP1_DIR */
+#define WM8903_GP1_DIR_WIDTH                         1  /* GP1_DIR */
+#define WM8903_GP1_OP_CFG                       0x0040  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_MASK                  0x0040  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_SHIFT                      6  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_WIDTH                      1  /* GP1_OP_CFG */
+#define WM8903_GP1_IP_CFG                       0x0020  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_MASK                  0x0020  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_SHIFT                      5  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_WIDTH                      1  /* GP1_IP_CFG */
+#define WM8903_GP1_LVL                          0x0010  /* GP1_LVL */
+#define WM8903_GP1_LVL_MASK                     0x0010  /* GP1_LVL */
+#define WM8903_GP1_LVL_SHIFT                         4  /* GP1_LVL */
+#define WM8903_GP1_LVL_WIDTH                         1  /* GP1_LVL */
+#define WM8903_GP1_PD                           0x0008  /* GP1_PD */
+#define WM8903_GP1_PD_MASK                      0x0008  /* GP1_PD */
+#define WM8903_GP1_PD_SHIFT                          3  /* GP1_PD */
+#define WM8903_GP1_PD_WIDTH                          1  /* GP1_PD */
+#define WM8903_GP1_PU                           0x0004  /* GP1_PU */
+#define WM8903_GP1_PU_MASK                      0x0004  /* GP1_PU */
+#define WM8903_GP1_PU_SHIFT                          2  /* GP1_PU */
+#define WM8903_GP1_PU_WIDTH                          1  /* GP1_PU */
+#define WM8903_GP1_INTMODE                      0x0002  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_MASK                 0x0002  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_SHIFT                     1  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_WIDTH                     1  /* GP1_INTMODE */
+#define WM8903_GP1_DB                           0x0001  /* GP1_DB */
+#define WM8903_GP1_DB_MASK                      0x0001  /* GP1_DB */
+#define WM8903_GP1_DB_SHIFT                          0  /* GP1_DB */
+#define WM8903_GP1_DB_WIDTH                          1  /* GP1_DB */
+
+/*
+ * R117 (0x75) - GPIO Control 2
+ */
+#define WM8903_GP2_FN_MASK                      0x1F00  /* GP2_FN - [12:8] */
+#define WM8903_GP2_FN_SHIFT                          8  /* GP2_FN - [12:8] */
+#define WM8903_GP2_FN_WIDTH                          5  /* GP2_FN - [12:8] */
+#define WM8903_GP2_DIR                          0x0080  /* GP2_DIR */
+#define WM8903_GP2_DIR_MASK                     0x0080  /* GP2_DIR */
+#define WM8903_GP2_DIR_SHIFT                         7  /* GP2_DIR */
+#define WM8903_GP2_DIR_WIDTH                         1  /* GP2_DIR */
+#define WM8903_GP2_OP_CFG                       0x0040  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_MASK                  0x0040  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_SHIFT                      6  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_WIDTH                      1  /* GP2_OP_CFG */
+#define WM8903_GP2_IP_CFG                       0x0020  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_MASK                  0x0020  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_SHIFT                      5  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_WIDTH                      1  /* GP2_IP_CFG */
+#define WM8903_GP2_LVL                          0x0010  /* GP2_LVL */
+#define WM8903_GP2_LVL_MASK                     0x0010  /* GP2_LVL */
+#define WM8903_GP2_LVL_SHIFT                         4  /* GP2_LVL */
+#define WM8903_GP2_LVL_WIDTH                         1  /* GP2_LVL */
+#define WM8903_GP2_PD                           0x0008  /* GP2_PD */
+#define WM8903_GP2_PD_MASK                      0x0008  /* GP2_PD */
+#define WM8903_GP2_PD_SHIFT                          3  /* GP2_PD */
+#define WM8903_GP2_PD_WIDTH                          1  /* GP2_PD */
+#define WM8903_GP2_PU                           0x0004  /* GP2_PU */
+#define WM8903_GP2_PU_MASK                      0x0004  /* GP2_PU */
+#define WM8903_GP2_PU_SHIFT                          2  /* GP2_PU */
+#define WM8903_GP2_PU_WIDTH                          1  /* GP2_PU */
+#define WM8903_GP2_INTMODE                      0x0002  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_MASK                 0x0002  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_SHIFT                     1  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_WIDTH                     1  /* GP2_INTMODE */
+#define WM8903_GP2_DB                           0x0001  /* GP2_DB */
+#define WM8903_GP2_DB_MASK                      0x0001  /* GP2_DB */
+#define WM8903_GP2_DB_SHIFT                          0  /* GP2_DB */
+#define WM8903_GP2_DB_WIDTH                          1  /* GP2_DB */
+
+/*
+ * R118 (0x76) - GPIO Control 3
+ */
+#define WM8903_GP3_FN_MASK                      0x1F00  /* GP3_FN - [12:8] */
+#define WM8903_GP3_FN_SHIFT                          8  /* GP3_FN - [12:8] */
+#define WM8903_GP3_FN_WIDTH                          5  /* GP3_FN - [12:8] */
+#define WM8903_GP3_DIR                          0x0080  /* GP3_DIR */
+#define WM8903_GP3_DIR_MASK                     0x0080  /* GP3_DIR */
+#define WM8903_GP3_DIR_SHIFT                         7  /* GP3_DIR */
+#define WM8903_GP3_DIR_WIDTH                         1  /* GP3_DIR */
+#define WM8903_GP3_OP_CFG                       0x0040  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_MASK                  0x0040  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_SHIFT                      6  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_WIDTH                      1  /* GP3_OP_CFG */
+#define WM8903_GP3_IP_CFG                       0x0020  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_MASK                  0x0020  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_SHIFT                      5  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_WIDTH                      1  /* GP3_IP_CFG */
+#define WM8903_GP3_LVL                          0x0010  /* GP3_LVL */
+#define WM8903_GP3_LVL_MASK                     0x0010  /* GP3_LVL */
+#define WM8903_GP3_LVL_SHIFT                         4  /* GP3_LVL */
+#define WM8903_GP3_LVL_WIDTH                         1  /* GP3_LVL */
+#define WM8903_GP3_PD                           0x0008  /* GP3_PD */
+#define WM8903_GP3_PD_MASK                      0x0008  /* GP3_PD */
+#define WM8903_GP3_PD_SHIFT                          3  /* GP3_PD */
+#define WM8903_GP3_PD_WIDTH                          1  /* GP3_PD */
+#define WM8903_GP3_PU                           0x0004  /* GP3_PU */
+#define WM8903_GP3_PU_MASK                      0x0004  /* GP3_PU */
+#define WM8903_GP3_PU_SHIFT                          2  /* GP3_PU */
+#define WM8903_GP3_PU_WIDTH                          1  /* GP3_PU */
+#define WM8903_GP3_INTMODE                      0x0002  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_MASK                 0x0002  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_SHIFT                     1  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_WIDTH                     1  /* GP3_INTMODE */
+#define WM8903_GP3_DB                           0x0001  /* GP3_DB */
+#define WM8903_GP3_DB_MASK                      0x0001  /* GP3_DB */
+#define WM8903_GP3_DB_SHIFT                          0  /* GP3_DB */
+#define WM8903_GP3_DB_WIDTH                          1  /* GP3_DB */
+
+/*
+ * R119 (0x77) - GPIO Control 4
+ */
+#define WM8903_GP4_FN_MASK                      0x1F00  /* GP4_FN - [12:8] */
+#define WM8903_GP4_FN_SHIFT                          8  /* GP4_FN - [12:8] */
+#define WM8903_GP4_FN_WIDTH                          5  /* GP4_FN - [12:8] */
+#define WM8903_GP4_DIR                          0x0080  /* GP4_DIR */
+#define WM8903_GP4_DIR_MASK                     0x0080  /* GP4_DIR */
+#define WM8903_GP4_DIR_SHIFT                         7  /* GP4_DIR */
+#define WM8903_GP4_DIR_WIDTH                         1  /* GP4_DIR */
+#define WM8903_GP4_OP_CFG                       0x0040  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_MASK                  0x0040  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_SHIFT                      6  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_WIDTH                      1  /* GP4_OP_CFG */
+#define WM8903_GP4_IP_CFG                       0x0020  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_MASK                  0x0020  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_SHIFT                      5  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_WIDTH                      1  /* GP4_IP_CFG */
+#define WM8903_GP4_LVL                          0x0010  /* GP4_LVL */
+#define WM8903_GP4_LVL_MASK                     0x0010  /* GP4_LVL */
+#define WM8903_GP4_LVL_SHIFT                         4  /* GP4_LVL */
+#define WM8903_GP4_LVL_WIDTH                         1  /* GP4_LVL */
+#define WM8903_GP4_PD                           0x0008  /* GP4_PD */
+#define WM8903_GP4_PD_MASK                      0x0008  /* GP4_PD */
+#define WM8903_GP4_PD_SHIFT                          3  /* GP4_PD */
+#define WM8903_GP4_PD_WIDTH                          1  /* GP4_PD */
+#define WM8903_GP4_PU                           0x0004  /* GP4_PU */
+#define WM8903_GP4_PU_MASK                      0x0004  /* GP4_PU */
+#define WM8903_GP4_PU_SHIFT                          2  /* GP4_PU */
+#define WM8903_GP4_PU_WIDTH                          1  /* GP4_PU */
+#define WM8903_GP4_INTMODE                      0x0002  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_MASK                 0x0002  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_SHIFT                     1  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_WIDTH                     1  /* GP4_INTMODE */
+#define WM8903_GP4_DB                           0x0001  /* GP4_DB */
+#define WM8903_GP4_DB_MASK                      0x0001  /* GP4_DB */
+#define WM8903_GP4_DB_SHIFT                          0  /* GP4_DB */
+#define WM8903_GP4_DB_WIDTH                          1  /* GP4_DB */
+
+/*
+ * R120 (0x78) - GPIO Control 5
+ */
+#define WM8903_GP5_FN_MASK                      0x1F00  /* GP5_FN - [12:8] */
+#define WM8903_GP5_FN_SHIFT                          8  /* GP5_FN - [12:8] */
+#define WM8903_GP5_FN_WIDTH                          5  /* GP5_FN - [12:8] */
+#define WM8903_GP5_DIR                          0x0080  /* GP5_DIR */
+#define WM8903_GP5_DIR_MASK                     0x0080  /* GP5_DIR */
+#define WM8903_GP5_DIR_SHIFT                         7  /* GP5_DIR */
+#define WM8903_GP5_DIR_WIDTH                         1  /* GP5_DIR */
+#define WM8903_GP5_OP_CFG                       0x0040  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_MASK                  0x0040  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_SHIFT                      6  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_WIDTH                      1  /* GP5_OP_CFG */
+#define WM8903_GP5_IP_CFG                       0x0020  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_MASK                  0x0020  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_SHIFT                      5  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_WIDTH                      1  /* GP5_IP_CFG */
+#define WM8903_GP5_LVL                          0x0010  /* GP5_LVL */
+#define WM8903_GP5_LVL_MASK                     0x0010  /* GP5_LVL */
+#define WM8903_GP5_LVL_SHIFT                         4  /* GP5_LVL */
+#define WM8903_GP5_LVL_WIDTH                         1  /* GP5_LVL */
+#define WM8903_GP5_PD                           0x0008  /* GP5_PD */
+#define WM8903_GP5_PD_MASK                      0x0008  /* GP5_PD */
+#define WM8903_GP5_PD_SHIFT                          3  /* GP5_PD */
+#define WM8903_GP5_PD_WIDTH                          1  /* GP5_PD */
+#define WM8903_GP5_PU                           0x0004  /* GP5_PU */
+#define WM8903_GP5_PU_MASK                      0x0004  /* GP5_PU */
+#define WM8903_GP5_PU_SHIFT                          2  /* GP5_PU */
+#define WM8903_GP5_PU_WIDTH                          1  /* GP5_PU */
+#define WM8903_GP5_INTMODE                      0x0002  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_MASK                 0x0002  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_SHIFT                     1  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_WIDTH                     1  /* GP5_INTMODE */
+#define WM8903_GP5_DB                           0x0001  /* GP5_DB */
+#define WM8903_GP5_DB_MASK                      0x0001  /* GP5_DB */
+#define WM8903_GP5_DB_SHIFT                          0  /* GP5_DB */
+#define WM8903_GP5_DB_WIDTH                          1  /* GP5_DB */
+
+struct wm8903_platform_data {
+	bool irq_active_low;   /* Set if IRQ active low, default high */
+
+        /* Default register value for R6 (Mic bias), used to configure
+	 * microphone detection.  In conjunction with gpio_cfg this
+	 * can be used to route the microphone status signals out onto
+	 * the GPIOs for use with snd_soc_jack_add_gpios().
+	 */
+	u16 micdet_cfg;
+
+	int micdet_delay;      /* Delay after microphone detection (ms) */
+
+	u32 gpio_cfg[5];       /* Default register values for GPIO pin mux */
+};
+
+#endif
diff --git a/include/sound/wm8904.h b/include/sound/wm8904.h
index d66575a601be..898be3a8db9a 100644
--- a/include/sound/wm8904.h
+++ b/include/sound/wm8904.h
@@ -15,8 +15,111 @@
 #ifndef __MFD_WM8994_PDATA_H__
 #define __MFD_WM8994_PDATA_H__
 
-#define WM8904_DRC_REGS 4
-#define WM8904_EQ_REGS  25
+/* Used to enable configuration of a GPIO to all zeros */
+#define WM8904_GPIO_NO_CONFIG 0x8000
+
+/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8904_MICDET_THR_MASK                  0x0070  /* MICDET_THR - [6:4] */
+#define WM8904_MICDET_THR_SHIFT                      4  /* MICDET_THR - [6:4] */
+#define WM8904_MICDET_THR_WIDTH                      3  /* MICDET_THR - [6:4] */
+#define WM8904_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
+#define WM8904_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
+#define WM8904_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */
+#define WM8904_MICDET_ENA                       0x0002  /* MICDET_ENA */
+#define WM8904_MICDET_ENA_MASK                  0x0002  /* MICDET_ENA */
+#define WM8904_MICDET_ENA_SHIFT                      1  /* MICDET_ENA */
+#define WM8904_MICDET_ENA_WIDTH                      1  /* MICDET_ENA */
+#define WM8904_MICBIAS_ENA                      0x0001  /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_MASK                 0x0001  /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_SHIFT                     0  /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_WIDTH                     1  /* MICBIAS_ENA */
+
+/*
+ * R7 (0x07) - Mic Bias Control 1
+ */
+#define WM8904_MIC_DET_FILTER_ENA               0x8000  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_MASK          0x8000  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_SHIFT             15  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_WIDTH              1  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA             0x4000  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_MASK        0x4000  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_SHIFT           14  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_WIDTH            1  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MICBIAS_SEL_MASK                 0x0007  /* MICBIAS_SEL - [2:0] */
+#define WM8904_MICBIAS_SEL_SHIFT                     0  /* MICBIAS_SEL - [2:0] */
+#define WM8904_MICBIAS_SEL_WIDTH                     3  /* MICBIAS_SEL - [2:0] */
+
+
+/*
+ * R121 (0x79) - GPIO Control 1
+ */
+#define WM8904_GPIO1_PU                         0x0020  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_MASK                    0x0020  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_SHIFT                        5  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_WIDTH                        1  /* GPIO1_PU */
+#define WM8904_GPIO1_PD                         0x0010  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_MASK                    0x0010  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_SHIFT                        4  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_WIDTH                        1  /* GPIO1_PD */
+#define WM8904_GPIO1_SEL_MASK                   0x000F  /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_SHIFT                       0  /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_WIDTH                       4  /* GPIO1_SEL - [3:0] */
+
+/*
+ * R122 (0x7A) - GPIO Control 2
+ */
+#define WM8904_GPIO2_PU                         0x0020  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_MASK                    0x0020  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_SHIFT                        5  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_WIDTH                        1  /* GPIO2_PU */
+#define WM8904_GPIO2_PD                         0x0010  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_MASK                    0x0010  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_SHIFT                        4  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_WIDTH                        1  /* GPIO2_PD */
+#define WM8904_GPIO2_SEL_MASK                   0x000F  /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_SHIFT                       0  /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_WIDTH                       4  /* GPIO2_SEL - [3:0] */
+
+/*
+ * R123 (0x7B) - GPIO Control 3
+ */
+#define WM8904_GPIO3_PU                         0x0020  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_MASK                    0x0020  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_SHIFT                        5  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_WIDTH                        1  /* GPIO3_PU */
+#define WM8904_GPIO3_PD                         0x0010  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_MASK                    0x0010  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_SHIFT                        4  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_WIDTH                        1  /* GPIO3_PD */
+#define WM8904_GPIO3_SEL_MASK                   0x000F  /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_SHIFT                       0  /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_WIDTH                       4  /* GPIO3_SEL - [3:0] */
+
+/*
+ * R124 (0x7C) - GPIO Control 4
+ */
+#define WM8904_GPI7_ENA                         0x0200  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_MASK                    0x0200  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_SHIFT                        9  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_WIDTH                        1  /* GPI7_ENA */
+#define WM8904_GPI8_ENA                         0x0100  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_MASK                    0x0100  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_SHIFT                        8  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_WIDTH                        1  /* GPI8_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA               0x0080  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_MASK          0x0080  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_SHIFT              7  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_WIDTH              1  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_SEL_MASK               0x000F  /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_SHIFT                   0  /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_WIDTH                   4  /* GPIO_BCLK_SEL - [3:0] */
+
+#define WM8904_MIC_REGS  2
+#define WM8904_GPIO_REGS 4
+#define WM8904_DRC_REGS  4
+#define WM8904_EQ_REGS   25
 
 /**
  * DRC configurations are specified with a label and a set of register
@@ -52,6 +155,9 @@ struct wm8904_pdata {
 
 	int num_retune_mobile_cfgs;
 	struct wm8904_retune_mobile_cfg *retune_mobile_cfgs;
+
+	u32 gpio_cfg[WM8904_GPIO_REGS];
+	u32 mic_cfg[WM8904_MIC_REGS];
 };
 
 #endif
diff --git a/include/sound/wm8960.h b/include/sound/wm8960.h
new file mode 100644
index 000000000000..74e9a95529c5
--- /dev/null
+++ b/include/sound/wm8960.h
@@ -0,0 +1,24 @@
+/*
+ * wm8960.h  --  WM8960 Soc Audio driver platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8960_PDATA_H
+#define _WM8960_PDATA_H
+
+#define WM8960_DRES_400R 0
+#define WM8960_DRES_200R 1
+#define WM8960_DRES_600R 2
+#define WM8960_DRES_150R 3
+#define WM8960_DRES_MAX  3
+
+struct wm8960_data {
+	bool capless;  /* Headphone outputs configured in capless mode */
+
+	int dres;  /* Discharge resistance for headphone outputs */
+};
+
+#endif
diff --git a/include/sound/wm9090.h b/include/sound/wm9090.h
new file mode 100644
index 000000000000..3718928cde1a
--- /dev/null
+++ b/include/sound/wm9090.h
@@ -0,0 +1,28 @@
+/*
+ * linux/sound/wm9090.h -- Platform data for WM9090
+ *
+ * Copyright 2009, 2010 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM9090_H
+#define __LINUX_SND_WM9090_H
+
+struct wm9090_platform_data {
+	/* Line inputs 1 & 2 can optionally be differential */
+	unsigned int lin1_diff:1;
+	unsigned int lin2_diff:1;
+
+	/* AGC configuration.  This is intended to protect the speaker
+	 * against overdriving and will therefore depend on the
+	 * hardware setup with incorrect runtime configuration
+	 * potentially causing hardware damage.
+	 */
+	unsigned int agc_ena:1;
+	u16 agc[3];
+};
+
+#endif