diff options
| author | Dan Williams <dan.j.williams@intel.com> | 2011-09-02 08:18:20 +0400 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2011-09-22 14:59:09 +0400 |
| commit | 8ec6552f4a77d15f446b00aed364e3c12d38aa6c (patch) | |
| tree | efaa0dfc6479d28a14e5e778e8eb246ff94c360f /include/scsi | |
| parent | 9c224ac21506d29f5a6ff4df0c4cc9f97484fa25 (diff) | |
| download | linux-8ec6552f4a77d15f446b00aed364e3c12d38aa6c.tar.xz | |
[SCSI] libsas: sgpio write support
Add SFF-8485 v0.7 / SAS-1 smp-write-gpio register support to libsas.
Defer SAS-2 support unless/until it defines an sgpio interface.
Minimum implementation needed to get the lights blinking.
try_test_sas_gpio_gp_bit() provides a common method to parse the
incoming write data (raw bitstream), and the to_sas_gpio_gp_bit() helper
routine can be used as a basis for the set/clear operations for the
'read' implementation. Host implementations parse as many bits
(ODx.[012]) as are locally supported and report the number of registers
successfully written. If the submitted data overruns the internal
number of registers available report the write as a success with the
number of bytes remaining reported in ->resid_len.
Example (assuming an active backplane) set the "identify" pattern for
the first 21 devices:
smp_write_gpio --count=2 --data=92,49,24,92,24,92,49,24 -t 4 --index=1 /dev/bsg/sas_hostX
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'include/scsi')
| -rw-r--r-- | include/scsi/libsas.h | 11 | ||||
| -rw-r--r-- | include/scsi/sas.h | 8 |
2 files changed, 19 insertions, 0 deletions
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 2517254b8403..af0a1deac930 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -405,6 +405,13 @@ static inline void sas_phy_disconnected(struct asd_sas_phy *phy) phy->linkrate = SAS_LINK_RATE_UNKNOWN; } +static inline unsigned int to_sas_gpio_od(int device, int bit) +{ + return 3 * device + bit; +} + +int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count); + /* ---------- Tasks ---------- */ /* service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED | @@ -592,6 +599,10 @@ struct sas_domain_function_template { /* Phy management */ int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *); + + /* GPIO support */ + int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type, + u8 reg_index, u8 reg_count, u8 *write_data); }; extern int sas_register_ha(struct sas_ha_struct *); diff --git a/include/scsi/sas.h b/include/scsi/sas.h index e9fd02281381..a3001add0c66 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -195,6 +195,14 @@ enum sas_open_rej_reason { SAS_OREJ_RSVD_RETRY = 18, }; +enum sas_gpio_reg_type { + SAS_GPIO_REG_CFG = 0, + SAS_GPIO_REG_RX = 1, + SAS_GPIO_REG_RX_GP = 2, + SAS_GPIO_REG_TX = 3, + SAS_GPIO_REG_TX_GP = 4, +}; + struct dev_to_host_fis { u8 fis_type; /* 0x34 */ u8 flags; |