Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) More iov_iter conversion work from Al Viro.

    [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
      wrong, and this pull actually adds an extra commit on top of the
      branch I'm pulling to fix that up, so that the pre-merge state is
      ok.   - Linus ]

 2) Various optimizations to the ipv4 forwarding information base trie
    lookup implementation.  From Alexander Duyck.

 3) Remove sock_iocb altogether, from CHristoph Hellwig.

 4) Allow congestion control algorithm selection via routing metrics.
    From Daniel Borkmann.

 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.

 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.

 7) Add xmit_more support to r8169, e1000, and e1000e drivers.  From
    Florian Westphal.

 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.

 9) Add BPF packet actions to packet scheduler, from Jiri Pirko.

10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.

11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
    Kwok.

12) More sanely handle out-of-window dupacks, which can result in
    serious ACK storms.  From Neal Cardwell.

13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
    Patrick McHardy, and Thomas Graf.

14) Support xmit_more in be2net, from Sathya Perla.

15) Group Policy extensions for vxlan, from Thomas Graf.

16) Remove Checksum Offload support for vxlan, from Tom Herbert.

17) Like ipv4, support lockless transmit over ipv6 UDP sockets.  From
    Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
  crypto: fix af_alg_make_sg() conversion to iov_iter
  ipv4: Namespecify TCP PMTU mechanism
  i40e: Fix for stats init function call in Rx setup
  tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
  openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
  ipv6: Make __ipv6_select_ident static
  ipv6: Fix fragment id assignment on LE arches.
  bridge: Fix inability to add non-vlan fdb entry
  net: Mellanox: Delete unnecessary checks before the function call "vunmap"
  cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
  ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
  net: dsa: Remove redundant phy_attach()
  IB/mlx4: Reset flow support for IB kernel ULPs
  IB/mlx4: Always use the correct port for mirrored multicast attachments
  net/bonding: Fix potential bad memory access during bonding events
  tipc: remove tipc_snprintf
  tipc: nl compat add noop and remove legacy nl framework
  tipc: convert legacy nl stats show to nl compat
  tipc: convert legacy nl net id get to nl compat
  tipc: convert legacy nl net id set to nl compat
  ...

1 files changed, 179 insertions, 114 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4ebb816241fa..64e09e1e8099 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -520,37 +520,41 @@ ieee80211_chandef_max_power(struct cfg80211_chan_def *chandef)
  *
  * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
  * @SURVEY_INFO_IN_USE: channel is currently being used
- * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
- * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
+ * @SURVEY_INFO_TIME: active time (in ms) was filled in
+ * @SURVEY_INFO_TIME_BUSY: busy time was filled in
+ * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in
+ * @SURVEY_INFO_TIME_RX: receive time was filled in
+ * @SURVEY_INFO_TIME_TX: transmit time was filled in
+ * @SURVEY_INFO_TIME_SCAN: scan time was filled in
  *
  * Used by the driver to indicate which info in &struct survey_info
  * it has filled in during the get_survey().
  */
 enum survey_info_flags {
-	SURVEY_INFO_NOISE_DBM = 1<<0,
-	SURVEY_INFO_IN_USE = 1<<1,
-	SURVEY_INFO_CHANNEL_TIME = 1<<2,
-	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
-	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
-	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
-	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
+	SURVEY_INFO_NOISE_DBM		= BIT(0),
+	SURVEY_INFO_IN_USE		= BIT(1),
+	SURVEY_INFO_TIME		= BIT(2),
+	SURVEY_INFO_TIME_BUSY		= BIT(3),
+	SURVEY_INFO_TIME_EXT_BUSY	= BIT(4),
+	SURVEY_INFO_TIME_RX		= BIT(5),
+	SURVEY_INFO_TIME_TX		= BIT(6),
+	SURVEY_INFO_TIME_SCAN		= BIT(7),
 };
 
 /**
  * struct survey_info - channel survey response
  *
- * @channel: the channel this survey record reports, mandatory
+ * @channel: the channel this survey record reports, may be %NULL for a single
+ *	record to report global statistics
  * @filled: bitflag of flags from &enum survey_info_flags
  * @noise: channel noise in dBm. This and all following fields are
  *	optional
- * @channel_time: amount of time in ms the radio spent on the channel
- * @channel_time_busy: amount of time the primary channel was sensed busy
- * @channel_time_ext_busy: amount of time the extension channel was sensed busy
- * @channel_time_rx: amount of time the radio spent receiving data
- * @channel_time_tx: amount of time the radio spent transmitting data
+ * @time: amount of time in ms the radio was turn on (on the channel)
+ * @time_busy: amount of time the primary channel was sensed busy
+ * @time_ext_busy: amount of time the extension channel was sensed busy
+ * @time_rx: amount of time the radio spent receiving data
+ * @time_tx: amount of time the radio spent transmitting data
+ * @time_scan: amount of time the radio spent for scanning
  *
  * Used by dump_survey() to report back per-channel survey information.
  *
@@ -559,11 +563,12 @@ enum survey_info_flags {
  */
 struct survey_info {
 	struct ieee80211_channel *channel;
-	u64 channel_time;
-	u64 channel_time_busy;
-	u64 channel_time_ext_busy;
-	u64 channel_time_rx;
-	u64 channel_time_tx;
+	u64 time;
+	u64 time_busy;
+	u64 time_ext_busy;
+	u64 time_rx;
+	u64 time_tx;
+	u64 time_scan;
 	u32 filled;
 	s8 noise;
 };
@@ -861,75 +866,6 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
 				  enum cfg80211_station_type statype);
 
 /**
- * enum station_info_flags - station information flags
- *
- * Used by the driver to indicate which info in &struct station_info
- * it has filled in during get_station() or dump_station().
- *
- * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
- * @STATION_INFO_RX_BYTES: @rx_bytes filled
- * @STATION_INFO_TX_BYTES: @tx_bytes filled
- * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value
- * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value
- * @STATION_INFO_LLID: @llid filled
- * @STATION_INFO_PLID: @plid filled
- * @STATION_INFO_PLINK_STATE: @plink_state filled
- * @STATION_INFO_SIGNAL: @signal filled
- * @STATION_INFO_TX_BITRATE: @txrate fields are filled
- *	(tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
- * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value
- * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value
- * @STATION_INFO_TX_RETRIES: @tx_retries filled
- * @STATION_INFO_TX_FAILED: @tx_failed filled
- * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
- * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
- * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
- * @STATION_INFO_BSS_PARAM: @bss_param filled
- * @STATION_INFO_CONNECTED_TIME: @connected_time filled
- * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
- * @STATION_INFO_STA_FLAGS: @sta_flags filled
- * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
- * @STATION_INFO_T_OFFSET: @t_offset filled
- * @STATION_INFO_LOCAL_PM: @local_pm filled
- * @STATION_INFO_PEER_PM: @peer_pm filled
- * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
- * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
- * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
- * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
- */
-enum station_info_flags {
-	STATION_INFO_INACTIVE_TIME		= BIT(0),
-	STATION_INFO_RX_BYTES			= BIT(1),
-	STATION_INFO_TX_BYTES			= BIT(2),
-	STATION_INFO_LLID			= BIT(3),
-	STATION_INFO_PLID			= BIT(4),
-	STATION_INFO_PLINK_STATE		= BIT(5),
-	STATION_INFO_SIGNAL			= BIT(6),
-	STATION_INFO_TX_BITRATE			= BIT(7),
-	STATION_INFO_RX_PACKETS			= BIT(8),
-	STATION_INFO_TX_PACKETS			= BIT(9),
-	STATION_INFO_TX_RETRIES			= BIT(10),
-	STATION_INFO_TX_FAILED			= BIT(11),
-	STATION_INFO_RX_DROP_MISC		= BIT(12),
-	STATION_INFO_SIGNAL_AVG			= BIT(13),
-	STATION_INFO_RX_BITRATE			= BIT(14),
-	STATION_INFO_BSS_PARAM			= BIT(15),
-	STATION_INFO_CONNECTED_TIME		= BIT(16),
-	STATION_INFO_ASSOC_REQ_IES		= BIT(17),
-	STATION_INFO_STA_FLAGS			= BIT(18),
-	STATION_INFO_BEACON_LOSS_COUNT		= BIT(19),
-	STATION_INFO_T_OFFSET			= BIT(20),
-	STATION_INFO_LOCAL_PM			= BIT(21),
-	STATION_INFO_PEER_PM			= BIT(22),
-	STATION_INFO_NONPEER_PM			= BIT(23),
-	STATION_INFO_RX_BYTES64			= BIT(24),
-	STATION_INFO_TX_BYTES64			= BIT(25),
-	STATION_INFO_CHAIN_SIGNAL		= BIT(26),
-	STATION_INFO_CHAIN_SIGNAL_AVG		= BIT(27),
-	STATION_INFO_EXPECTED_THROUGHPUT	= BIT(28),
-};
-
-/**
  * enum station_info_rate_flags - bitrate info flags
  *
  * Used by the driver to indicate the specific rate transmission
@@ -937,22 +873,35 @@ enum station_info_flags {
  *
  * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS
  * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS
- * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission
- * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission
- * @RATE_INFO_FLAGS_80P80_MHZ_WIDTH: 80+80 MHz width transmission
- * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission
  * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
  * @RATE_INFO_FLAGS_60G: 60GHz MCS
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS			= BIT(0),
 	RATE_INFO_FLAGS_VHT_MCS			= BIT(1),
-	RATE_INFO_FLAGS_40_MHZ_WIDTH		= BIT(2),
-	RATE_INFO_FLAGS_80_MHZ_WIDTH		= BIT(3),
-	RATE_INFO_FLAGS_80P80_MHZ_WIDTH		= BIT(4),
-	RATE_INFO_FLAGS_160_MHZ_WIDTH		= BIT(5),
-	RATE_INFO_FLAGS_SHORT_GI		= BIT(6),
-	RATE_INFO_FLAGS_60G			= BIT(7),
+	RATE_INFO_FLAGS_SHORT_GI		= BIT(2),
+	RATE_INFO_FLAGS_60G			= BIT(3),
+};
+
+/**
+ * enum rate_info_bw - rate bandwidth information
+ *
+ * Used by the driver to indicate the rate bandwidth.
+ *
+ * @RATE_INFO_BW_5: 5 MHz bandwidth
+ * @RATE_INFO_BW_10: 10 MHz bandwidth
+ * @RATE_INFO_BW_20: 20 MHz bandwidth
+ * @RATE_INFO_BW_40: 40 MHz bandwidth
+ * @RATE_INFO_BW_80: 80 MHz bandwidth
+ * @RATE_INFO_BW_160: 160 MHz bandwidth
+ */
+enum rate_info_bw {
+	RATE_INFO_BW_5,
+	RATE_INFO_BW_10,
+	RATE_INFO_BW_20,
+	RATE_INFO_BW_40,
+	RATE_INFO_BW_80,
+	RATE_INFO_BW_160,
 };
 
 /**
@@ -964,12 +913,14 @@ enum rate_info_flags {
  * @mcs: mcs index if struct describes a 802.11n bitrate
  * @legacy: bitrate in 100kbit/s for 802.11abg
  * @nss: number of streams (VHT only)
+ * @bw: bandwidth (from &enum rate_info_bw)
  */
 struct rate_info {
 	u8 flags;
 	u8 mcs;
 	u16 legacy;
 	u8 nss;
+	u8 bw;
 };
 
 /**
@@ -1003,6 +954,24 @@ struct sta_bss_parameters {
 	u16 beacon_interval;
 };
 
+/**
+ * struct cfg80211_tid_stats - per-TID statistics
+ * @filled: bitmap of flags using the bits of &enum nl80211_tid_stats to
+ *	indicate the relevant values in this struct are filled
+ * @rx_msdu: number of received MSDUs
+ * @tx_msdu: number of (attempted) transmitted MSDUs
+ * @tx_msdu_retries: number of retries (not counting the first) for
+ *	transmitted MSDUs
+ * @tx_msdu_failed: number of failed transmitted MSDUs
+ */
+struct cfg80211_tid_stats {
+	u32 filled;
+	u64 rx_msdu;
+	u64 tx_msdu;
+	u64 tx_msdu_retries;
+	u64 tx_msdu_failed;
+};
+
 #define IEEE80211_MAX_CHAINS	4
 
 /**
@@ -1010,11 +979,12 @@ struct sta_bss_parameters {
  *
  * Station information filled by driver for get_station() and dump_station.
  *
- * @filled: bitflag of flags from &enum station_info_flags
+ * @filled: bitflag of flags using the bits of &enum nl80211_sta_info to
+ *	indicate the relevant values in this struct for them
  * @connected_time: time(in secs) since a station is last connected
  * @inactive_time: time since last station activity (tx/rx) in milliseconds
- * @rx_bytes: bytes received from this station
- * @tx_bytes: bytes transmitted to this station
+ * @rx_bytes: bytes (size of MPDUs) received from this station
+ * @tx_bytes: bytes (size of MPDUs) transmitted to this station
  * @llid: mesh local link id
  * @plid: mesh peer link id
  * @plink_state: mesh peer link state
@@ -1027,10 +997,10 @@ struct sta_bss_parameters {
  * @chain_signal_avg: per-chain signal strength average in dBm
  * @txrate: current unicast bitrate from this station
  * @rxrate: current unicast bitrate to this station
- * @rx_packets: packets received from this station
- * @tx_packets: packets transmitted to this station
- * @tx_retries: cumulative retry counts
- * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
+ * @rx_packets: packets (MSDUs & MMPDUs) received from this station
+ * @tx_packets: packets (MSDUs & MMPDUs) transmitted to this station
+ * @tx_retries: cumulative retry counts (MPDUs)
+ * @tx_failed: number of failed transmissions (MPDUs) (retries exceeded, no ACK)
  * @rx_dropped_misc:  Dropped for un-specified reason.
  * @bss_param: current BSS parameters
  * @generation: generation number for nl80211 dumps.
@@ -1050,6 +1020,11 @@ struct sta_bss_parameters {
  * @nonpeer_pm: non-peer mesh STA power save mode
  * @expected_throughput: expected throughput in kbps (including 802.11 headers)
  *	towards this station.
+ * @rx_beacon: number of beacons received from this peer
+ * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
+ *	from this peer
+ * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
+ *	(IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
  */
 struct station_info {
 	u32 filled;
@@ -1090,10 +1065,9 @@ struct station_info {
 
 	u32 expected_throughput;
 
-	/*
-	 * Note: Add a new enum station_info_flags value for each new field and
-	 * use it to check which fields are initialized.
-	 */
+	u64 rx_beacon;
+	u8 rx_beacon_signal_avg;
+	struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
 };
 
 /**
@@ -1516,6 +1490,13 @@ struct cfg80211_match_set {
  * @mac_addr_mask: MAC address mask used with randomisation, bits that
  *	are 0 in the mask should be randomised, bits that are 1 should
  *	be taken from the @mac_addr
+ * @rcu_head: RCU callback used to free the struct
+ * @owner_nlportid: netlink portid of owner (if this should is a request
+ *	owned by a particular socket)
+ * @delay: delay in seconds to use before starting the first scan
+ *	cycle.  The driver may ignore this parameter and start
+ *	immediately (or at any other time), if this feature is not
+ *	supported.
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1529,6 +1510,7 @@ struct cfg80211_sched_scan_request {
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
 	s32 min_rssi_thold;
+	u32 delay;
 
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
@@ -1537,6 +1519,8 @@ struct cfg80211_sched_scan_request {
 	struct wiphy *wiphy;
 	struct net_device *dev;
 	unsigned long scan_start;
+	struct rcu_head rcu_head;
+	u32 owner_nlportid;
 
 	/* keep last */
 	struct ieee80211_channel *channels[0];
@@ -3011,6 +2995,8 @@ struct wiphy_vendor_command {
  * @regulatory_flags: wiphy regulatory flags, see
  *	&enum ieee80211_regulatory_flags
  * @features: features advertised to nl80211, see &enum nl80211_feature_flags.
+ * @ext_features: extended features advertised to nl80211, see
+ *	&enum nl80211_ext_feature_index.
  * @bss_priv_size: each BSS struct has private data allocated with it,
  *	this variable determines its size
  * @max_scan_ssids: maximum number of SSIDs the device can scan for in
@@ -3120,6 +3106,7 @@ struct wiphy {
 	u16 max_acl_mac_addrs;
 
 	u32 flags, regulatory_flags, features;
+	u8 ext_features[DIV_ROUND_UP(NUM_NL80211_EXT_FEATURES, 8)];
 
 	u32 ap_sme_capa;
 
@@ -3808,6 +3795,34 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
 int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
 
 /**
+ * regulatory_set_wiphy_regd - set regdom info for self managed drivers
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @rd: the regulatory domain informatoin to use for this wiphy
+ *
+ * Set the regulatory domain information for self-managed wiphys, only they
+ * may use this function. See %REGULATORY_WIPHY_SELF_MANAGED for more
+ * information.
+ *
+ * Return: 0 on success. -EINVAL, -EPERM
+ */
+int regulatory_set_wiphy_regd(struct wiphy *wiphy,
+			      struct ieee80211_regdomain *rd);
+
+/**
+ * regulatory_set_wiphy_regd_sync_rtnl - set regdom for self-managed drivers
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @rd: the regulatory domain information to use for this wiphy
+ *
+ * This functions requires the RTNL to be held and applies the new regdomain
+ * synchronously to this wiphy. For more details see
+ * regulatory_set_wiphy_regd().
+ *
+ * Return: 0 on success. -EINVAL, -EPERM
+ */
+int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy,
+					struct ieee80211_regdomain *rd);
+
+/**
  * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
  * @wiphy: the wireless device we want to process the regulatory domain on
  * @regd: the custom regulatory domain to use for this wiphy
@@ -4565,13 +4580,27 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
 		      struct station_info *sinfo, gfp_t gfp);
 
 /**
+ * cfg80211_del_sta_sinfo - notify userspace about deletion of a station
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information/statistics
+ * @gfp: allocation flags
+ */
+void cfg80211_del_sta_sinfo(struct net_device *dev, const u8 *mac_addr,
+			    struct station_info *sinfo, gfp_t gfp);
+
+/**
  * cfg80211_del_sta - notify userspace about deletion of a station
  *
  * @dev: the netdev
  * @mac_addr: the station's address
  * @gfp: allocation flags
  */
-void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
+static inline void cfg80211_del_sta(struct net_device *dev,
+				    const u8 *mac_addr, gfp_t gfp)
+{
+	cfg80211_del_sta_sinfo(dev, mac_addr, NULL, gfp);
+}
 
 /**
  * cfg80211_conn_failed - connection request failed notification
@@ -5033,6 +5062,42 @@ void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev,
  */
 void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy);
 
+/**
+ * wiphy_ext_feature_set - set the extended feature flag
+ *
+ * @wiphy: the wiphy to modify.
+ * @ftidx: extended feature bit index.
+ *
+ * The extended features are flagged in multiple bytes (see
+ * &struct wiphy.@ext_features)
+ */
+static inline void wiphy_ext_feature_set(struct wiphy *wiphy,
+					 enum nl80211_ext_feature_index ftidx)
+{
+	u8 *ft_byte;
+
+	ft_byte = &wiphy->ext_features[ftidx / 8];
+	*ft_byte |= BIT(ftidx % 8);
+}
+
+/**
+ * wiphy_ext_feature_isset - check the extended feature flag
+ *
+ * @wiphy: the wiphy to modify.
+ * @ftidx: extended feature bit index.
+ *
+ * The extended features are flagged in multiple bytes (see
+ * &struct wiphy.@ext_features)
+ */
+static inline bool
+wiphy_ext_feature_isset(struct wiphy *wiphy,
+			enum nl80211_ext_feature_index ftidx)
+{
+	u8 ft_byte;
+
+	ft_byte = wiphy->ext_features[ftidx / 8];
+	return (ft_byte & BIT(ftidx % 8)) != 0;
+}
 
 /* ethtool helper */
 void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);