Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big USB and thunderbolt pull request for 5.11-rc1.

  Nothing major in here, just the grind of constant development to
  support new hardware and fix old issues:

   - thunderbolt updates for new USB4 hardware

   - cdns3 major driver updates

   - lots of typec updates and additions as more hardware is available

   - usb serial driver updates and fixes

   - other tiny USB driver updates

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: phy: convert comma to semicolon
  usb: ucsi: convert comma to semicolon
  usb: typec: tcpm: convert comma to semicolon
  usb: typec: tcpm: Update vbus_vsafe0v on init
  usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
  usb: typec: Add class for plug alt mode device
  USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
  USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
  USB: typec: tcpm: Fix PR_SWAP error handling
  USB: typec: tcpm: Hard Reset after not receiving a Request
  USB: gadget: f_fs: remove likely/unlikely
  usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
  USB: gadget: f_midi: setup SuperSpeed Plus descriptors
  USB: gadget: f_acm: add support for SuperSpeed Plus
  USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
  usb: typec: intel_pmc_mux: Configure cable generation value for USB4
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  ...

7 files changed, 51 insertions, 12 deletions

diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 3dbb42c637c1..96281cd50ff6 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -734,10 +734,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
 
 /* random stuff */
 
-#define	RUN_CONTEXT (in_irq() ? "in_irq" \
-		: (in_interrupt() ? "in_interrupt" : "can sleep"))
-
-
 /* This rwsem is for use only by the hub driver and ehci-hcd.
  * Nobody else should touch it.
  */
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index 3a805e2ecbc9..bb9a782e1411 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -466,6 +466,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
 #define PD_T_DRP_SRC		30
 #define PD_T_PS_SOURCE_OFF	920
 #define PD_T_PS_SOURCE_ON	480
+#define PD_T_PS_SOURCE_ON_PRS	450	/* 390 - 480ms */
 #define PD_T_PS_HARD_RESET	30
 #define PD_T_SRC_RECOVER	760
 #define PD_T_SRC_RECOVER_MAX	1000
@@ -484,6 +485,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
 
 #define PD_T_CC_DEBOUNCE	200	/* 100 - 200 ms */
 #define PD_T_PD_DEBOUNCE	20	/* 10 - 20 ms */
+#define PD_T_TRY_CC_DEBOUNCE	15	/* 10 - 20 ms */
 
 #define PD_N_CAPS_COUNT		(PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP)
 #define PD_N_HARD_RESET_COUNT	2
diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
index 68bdc4e2f5a9..8c08eeb9a74b 100644
--- a/include/linux/usb/pd_vdo.h
+++ b/include/linux/usb/pd_vdo.h
@@ -103,17 +103,25 @@
  * --------------------
  * <31>     :: data capable as a USB host
  * <30>     :: data capable as a USB device
- * <29:27>  :: product type
+ * <29:27>  :: product type (UFP / Cable)
  * <26>     :: modal operation supported (1b == yes)
- * <25:16>  :: Reserved, Shall be set to zero
+ * <25:16>  :: product type (DFP)
  * <15:0>   :: USB-IF assigned VID for this cable vendor
  */
 #define IDH_PTYPE_UNDEF		0
 #define IDH_PTYPE_HUB		1
 #define IDH_PTYPE_PERIPH	2
+#define IDH_PTYPE_PSD		3
+#define IDH_PTYPE_AMA		5
+
 #define IDH_PTYPE_PCABLE	3
 #define IDH_PTYPE_ACABLE	4
-#define IDH_PTYPE_AMA		5
+
+#define IDH_PTYPE_DFP_UNDEF	0
+#define IDH_PTYPE_DFP_HUB	1
+#define IDH_PTYPE_DFP_HOST	2
+#define IDH_PTYPE_DFP_PB	3
+#define IDH_PTYPE_DFP_AMC	4
 
 #define VDO_IDH(usbh, usbd, ptype, is_modal, vid)		\
 	((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27	\
@@ -122,6 +130,7 @@
 #define PD_IDH_PTYPE(vdo)	(((vdo) >> 27) & 0x7)
 #define PD_IDH_VID(vdo)		((vdo) & 0xffff)
 #define PD_IDH_MODAL_SUPP(vdo)	((vdo) & (1 << 26))
+#define PD_IDH_DFP_PTYPE(vdo)	(((vdo) >> 23) & 0x7)
 
 /*
  * Cert Stat VDO
@@ -177,7 +186,7 @@
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
  * <23:20> :: Reserved, Shall be set to zero
- * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C)
+ * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
  * <17>    :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
  * <16:13> :: cable latency (0001 == <10ns(~1m length))
  * <12:11> :: cable termination type (11b == both ends active VCONN req)
@@ -193,6 +202,7 @@
 #define CABLE_ATYPE		0
 #define CABLE_BTYPE		1
 #define CABLE_CTYPE		2
+#define CABLE_CAPTIVE		3
 #define CABLE_PLUG		0
 #define CABLE_RECEPTACLE	1
 #define CABLE_CURR_1A5		0
@@ -208,6 +218,7 @@
 	 | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7	\
 	 | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3		\
 	 | ((usbss) & 0x7))
+#define VDO_TYPEC_CABLE_TYPE(vdo)	(((vdo) >> 18) & 0x3)
 
 /*
  * AMA VDO
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8e67eff9039f..1c09b922f8b0 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -62,7 +62,6 @@
  * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
  *	port.
  * @flags: usb serial port flags
- * @write_wait: a wait_queue_head_t used by the port.
  * @work: work queue entry for the line discipline waking up.
  * @dev: pointer to the serial device
  *
@@ -108,7 +107,6 @@ struct usb_serial_port {
 	int			tx_bytes;
 
 	unsigned long		flags;
-	wait_queue_head_t	write_wait;
 	struct work_struct	work;
 	unsigned long		sysrq; /* sysrq timeout */
 	struct device		dev;
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
index 09762d26fa0c..f4a18427f5c4 100644
--- a/include/linux/usb/tcpm.h
+++ b/include/linux/usb/tcpm.h
@@ -83,6 +83,27 @@ enum tcpm_transmit_type {
  *		Optional; Called to enable/disable PD 3.0 fast role swap.
  *		Enabling frs is accessory dependent as not all PD3.0
  *		accessories support fast role swap.
+ * @frs_sourcing_vbus:
+ *		Optional; Called to notify that vbus is now being sourced.
+ *		Low level drivers can perform chip specific operations, if any.
+ * @enable_auto_vbus_discharge:
+ *		Optional; TCPCI spec based TCPC implementations can optionally
+ *		support hardware to autonomously dischrge vbus upon disconnecting
+ *		as sink or source. TCPM signals TCPC to enable the mechanism upon
+ *		entering connected state and signals disabling upon disconnect.
+ * @set_auto_vbus_discharge_threshold:
+ *		Mandatory when enable_auto_vbus_discharge is implemented. TCPM
+ *		calls this function to allow lower levels drivers to program the
+ *		vbus threshold voltage below which the vbus discharge circuit
+ *		will be turned on. requested_vbus_voltage is set to 0 when vbus
+ *		is going to disappear knowingly i.e. during PR_SWAP and
+ *		HARD_RESET etc.
+ * @is_vbus_vsafe0v:
+ *		Optional; TCPCI spec based TCPC implementations are expected to
+ *		detect VSAFE0V voltage level at vbus. When detection of VSAFE0V
+ *		is supported by TCPC, set this callback for TCPM to query
+ *		whether vbus is at VSAFE0V when needed.
+ *		Returns true when vbus is at VSAFE0V, false otherwise.
  */
 struct tcpc_dev {
 	struct fwnode_handle *fwnode;
@@ -106,9 +127,14 @@ struct tcpc_dev {
 			      enum typec_cc_status cc);
 	int (*try_role)(struct tcpc_dev *dev, int role);
 	int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
-			   const struct pd_message *msg);
+			   const struct pd_message *msg, unsigned int negotiated_rev);
 	int (*set_bist_data)(struct tcpc_dev *dev, bool on);
 	int (*enable_frs)(struct tcpc_dev *dev, bool enable);
+	void (*frs_sourcing_vbus)(struct tcpc_dev *dev);
+	int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable);
+	int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode,
+						 bool pps_active, u32 requested_vbus_voltage);
+	bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev);
 };
 
 struct tcpm_port;
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index 6be558045942..54475323f83b 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -126,9 +126,11 @@ struct typec_altmode_desc {
 	enum typec_port_data	roles;
 };
 
+int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmodes);
 struct typec_altmode
 *typec_partner_register_altmode(struct typec_partner *partner,
 				const struct typec_altmode_desc *desc);
+int typec_plug_set_num_altmodes(struct typec_plug *plug, int num_altmodes);
 struct typec_altmode
 *typec_plug_register_altmode(struct typec_plug *plug,
 			     const struct typec_altmode_desc *desc);
diff --git a/include/linux/usb/typec_tbt.h b/include/linux/usb/typec_tbt.h
index 47c2d501ddce..63dd44b72e0c 100644
--- a/include/linux/usb/typec_tbt.h
+++ b/include/linux/usb/typec_tbt.h
@@ -39,12 +39,16 @@ struct typec_thunderbolt_data {
 #define   TBT_CABLE_USB3_GEN1		1
 #define   TBT_CABLE_USB3_PASSIVE	2
 #define   TBT_CABLE_10_AND_20GBPS	3
-#define TBT_CABLE_ROUNDED		BIT(19)
+#define TBT_CABLE_ROUNDED_SUPPORT(_vdo_) \
+					(((_vdo_) & GENMASK(20, 19)) >> 19)
+#define   TBT_GEN3_NON_ROUNDED                 0
+#define   TBT_GEN3_GEN4_ROUNDED_NON_ROUNDED    1
 #define TBT_CABLE_OPTICAL		BIT(21)
 #define TBT_CABLE_RETIMER		BIT(22)
 #define TBT_CABLE_LINK_TRAINING		BIT(23)
 
 #define TBT_SET_CABLE_SPEED(_s_)	(((_s_) & GENMASK(2, 0)) << 16)
+#define TBT_SET_CABLE_ROUNDED(_g_)	(((_g_) & GENMASK(1, 0)) << 19)
 
 /* TBT3 Device Enter Mode VDO bits */
 #define TBT_ENTER_MODE_CABLE_SPEED(s)	TBT_SET_CABLE_SPEED(s)