Merge tag 'nand/for-4.11' of github.com:linux-nand/linux

From Boris:

"""
This pull request contains minor fixes/improvements on existing drivers:
- sunxi: avoid busy-waiting for NAND events
- ifc: fix ECC handling on IFC v1.0
- OX820: add explicit dependency on ARCH_OXNAS in Kconfig
- core: add a new manufacture ID and fix a kernel-doc warning
- fsmc: kill pdata support
- lpc32xx_slc: remove unneeded NULL check
"""

Conflicts:
	include/linux/mtd/nand.h
[Brian: trivial conflict in the comment section]

2 files changed, 3 insertions, 157 deletions

diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
deleted file mode 100644
index ad3c3488073c..000000000000
--- a/include/linux/mtd/fsmc.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * incude/mtd/fsmc.h
- *
- * ST Microelectronics
- * Flexible Static Memory Controller (FSMC)
- * platform data interface and header file
- *
- * Copyright © 2010 ST Microelectronics
- * Vipin Kumar <vipin.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MTD_FSMC_H
-#define __MTD_FSMC_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/types.h>
-#include <linux/mtd/partitions.h>
-#include <asm/param.h>
-
-#define FSMC_NAND_BW8		1
-#define FSMC_NAND_BW16		2
-
-#define FSMC_MAX_NOR_BANKS	4
-#define FSMC_MAX_NAND_BANKS	4
-
-#define FSMC_FLASH_WIDTH8	1
-#define FSMC_FLASH_WIDTH16	2
-
-/* fsmc controller registers for NOR flash */
-#define CTRL			0x0
-	/* ctrl register definitions */
-	#define BANK_ENABLE		(1 << 0)
-	#define MUXED			(1 << 1)
-	#define NOR_DEV			(2 << 2)
-	#define WIDTH_8			(0 << 4)
-	#define WIDTH_16		(1 << 4)
-	#define RSTPWRDWN		(1 << 6)
-	#define WPROT			(1 << 7)
-	#define WRT_ENABLE		(1 << 12)
-	#define WAIT_ENB		(1 << 13)
-
-#define CTRL_TIM		0x4
-	/* ctrl_tim register definitions */
-
-#define FSMC_NOR_BANK_SZ	0x8
-#define FSMC_NOR_REG_SIZE	0x40
-
-#define FSMC_NOR_REG(base, bank, reg)		(base + \
-						FSMC_NOR_BANK_SZ * (bank) + \
-						reg)
-
-/* fsmc controller registers for NAND flash */
-#define PC			0x00
-	/* pc register definitions */
-	#define FSMC_RESET		(1 << 0)
-	#define FSMC_WAITON		(1 << 1)
-	#define FSMC_ENABLE		(1 << 2)
-	#define FSMC_DEVTYPE_NAND	(1 << 3)
-	#define FSMC_DEVWID_8		(0 << 4)
-	#define FSMC_DEVWID_16		(1 << 4)
-	#define FSMC_ECCEN		(1 << 6)
-	#define FSMC_ECCPLEN_512	(0 << 7)
-	#define FSMC_ECCPLEN_256	(1 << 7)
-	#define FSMC_TCLR_1		(1)
-	#define FSMC_TCLR_SHIFT		(9)
-	#define FSMC_TCLR_MASK		(0xF)
-	#define FSMC_TAR_1		(1)
-	#define FSMC_TAR_SHIFT		(13)
-	#define FSMC_TAR_MASK		(0xF)
-#define STS			0x04
-	/* sts register definitions */
-	#define FSMC_CODE_RDY		(1 << 15)
-#define COMM			0x08
-	/* comm register definitions */
-	#define FSMC_TSET_0		0
-	#define FSMC_TSET_SHIFT		0
-	#define FSMC_TSET_MASK		0xFF
-	#define FSMC_TWAIT_6		6
-	#define FSMC_TWAIT_SHIFT	8
-	#define FSMC_TWAIT_MASK		0xFF
-	#define FSMC_THOLD_4		4
-	#define FSMC_THOLD_SHIFT	16
-	#define FSMC_THOLD_MASK		0xFF
-	#define FSMC_THIZ_1		1
-	#define FSMC_THIZ_SHIFT		24
-	#define FSMC_THIZ_MASK		0xFF
-#define ATTRIB			0x0C
-#define IOATA			0x10
-#define ECC1			0x14
-#define ECC2			0x18
-#define ECC3			0x1C
-#define FSMC_NAND_BANK_SZ	0x20
-
-#define FSMC_NAND_REG(base, bank, reg)		(base + FSMC_NOR_REG_SIZE + \
-						(FSMC_NAND_BANK_SZ * (bank)) + \
-						reg)
-
-#define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
-
-struct fsmc_nand_timings {
-	uint8_t tclr;
-	uint8_t tar;
-	uint8_t thiz;
-	uint8_t thold;
-	uint8_t twait;
-	uint8_t tset;
-};
-
-enum access_mode {
-	USE_DMA_ACCESS = 1,
-	USE_WORD_ACCESS,
-};
-
-/**
- * fsmc_nand_platform_data - platform specific NAND controller config
- * @nand_timings: timing setup for the physical NAND interface
- * @partitions: partition table for the platform, use a default fallback
- * if this is NULL
- * @nr_partitions: the number of partitions in the previous entry
- * @options: different options for the driver
- * @width: bus width
- * @bank: default bank
- * @select_bank: callback to select a certain bank, this is
- * platform-specific. If the controller only supports one bank
- * this may be set to NULL
- */
-struct fsmc_nand_platform_data {
-	struct fsmc_nand_timings *nand_timings;
-	struct mtd_partition	*partitions;
-	unsigned int		nr_partitions;
-	unsigned int		options;
-	unsigned int		width;
-	unsigned int		bank;
-
-	enum access_mode	mode;
-
-	void			(*select_bank)(uint32_t bank, uint32_t busw);
-
-	/* priv structures for dma accesses */
-	void			*read_dma_priv;
-	void			*write_dma_priv;
-};
-
-extern int __init fsmc_nor_init(struct platform_device *pdev,
-		unsigned long base, uint32_t bank, uint32_t width);
-extern void __init fsmc_init_board_info(struct platform_device *pdev,
-		struct mtd_partition *partitions, unsigned int nr_partitions,
-		unsigned int width);
-
-#endif /* __MTD_FSMC_H */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4e1b441c3a7e..9591e0fbe5bd 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -615,7 +615,7 @@ struct nand_buffers {
  * @tALS_min: ALE setup time
  * @tAR_min: ALE to RE# delay
  * @tCEA_max: CE# access time
- * @tCEH_min:
+ * @tCEH_min: CE# high hold time
  * @tCH_min:  CE# hold time
  * @tCHZ_max: CE# high to output hi-Z
  * @tCLH_min: CLE hold time
@@ -804,6 +804,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
  * @max_bb_per_die:	[INTERN] the max number of bad blocks each die of a
  *			this nand device will encounter their life times.
  * @blocks_per_die:	[INTERN] The number of PEBs in a die
+ * @data_interface:	[INTERN] NAND interface timing information
  * @read_retries:	[INTERN] the number of read retry modes supported
  * @onfi_set_features:	[REPLACEABLE] set the features for ONFI nand
  * @onfi_get_features:	[REPLACEABLE] get the features for ONFI nand
@@ -963,6 +964,7 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
 #define NAND_MFR_SANDISK	0x45
 #define NAND_MFR_INTEL		0x89
 #define NAND_MFR_ATO		0x9b
+#define NAND_MFR_WINBOND	0xef
 
 /* The maximum expected count of bytes in the NAND ID sequence */
 #define NAND_MAX_ID_LEN 8