Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers

Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
 "The patches contained herein do the following:

 (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI.  I checked
     this with Paul Mackerras before I created the patch and he suggested some
     extra bits to unexport.

 (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
     applicable, and remove from the UAPI that part of linux/fs.h that was the
     reason for linux/blk_types.h being exported in the first place.  I
     discussed this with Jens Axboe before creating the patch.

 (3) The big patch of the series to disintegrate include/linux/*.h as a unit.
     This could be split up, though there would be collisions in moving stuff
     between the two Kbuild files when the parts are merged as that file is
     sorted alphabetically rather than being grouped by subsystem.

     Of this set of headers, 17 files have changed in the UAPI exported region
     since the 4th and only 8 since the 9th so there isn't much change in this
     area - as one might expect.

     It should be pretty obvious and straightforward if it does come to fixing
     up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
     to the same file in the include/uapi/linux/ directory.

     If a new file appears then things get a bit more complicated as the
     "headers +=" line has to move to include/uapi/linux/Kbuild.  Only one new
     file has appeared since the 9th and I judge this type of event relatively
     unlikely.

 (4) A patch to disintegrate include/linux/byteorder/*.h as a unit.

  Signed-off-by: David Howells <dhowells@redhat.com>"

* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h

1 files changed, 1 insertions, 153 deletions

diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a11592..47492c9631b3 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
  *
  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
  */
-
 #ifndef __LINUX_MII_H__
 #define __LINUX_MII_H__
 
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR		0x00	/* Basic mode control register */
-#define MII_BMSR		0x01	/* Basic mode status register  */
-#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
-#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
-#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
-#define MII_LPA			0x05	/* Link partner ability reg    */
-#define MII_EXPANSION		0x06	/* Expansion register          */
-#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
-#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
-#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
-#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
-#define MII_ESTATUS		0x0f	/* Extended Status             */
-#define MII_DCOUNTER		0x12	/* Disconnect counter          */
-#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
-#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
-#define MII_SREVISION		0x16	/* Silicon revision            */
-#define MII_RESV1		0x17	/* Reserved...                 */
-#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR		0x19	/* PHY address                 */
-#define MII_RESV2		0x1a	/* Reserved...                 */
-#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG		0x1c	/* Network interface config    */
-
-/* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...                   */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
-#define BMCR_CTST		0x0080	/* Collision test              */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
-#define BMCR_PDOWN		0x0800	/* Enable low power state      */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
-#define BMCR_RESET		0x8000	/* Reset to default state      */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
-#define BMSR_JCD		0x0002	/* Jabber detected             */
-#define BMSR_LSTATUS		0x0004	/* Link status                 */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x00c0	/* Unused...                   */
-#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
-#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
-#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
-#define ADVERTISE_RESV		0x1000	/* Unused...                   */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
-
-#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				  ADVERTISE_CSMA)
-#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
-				  ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
-#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
-#define LPA_RESV		0x1000	/* Unused...                   */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit               */
-
-#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
-#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...                   */
-
-#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
-#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER	0x0800
-#define CTL1000_ENABLE_MASTER	0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
-#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
-#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX		0x01
-#define FLOW_CTRL_RX		0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
-#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
-	__u16		phy_id;
-	__u16		reg_num;
-	__u16		val_in;
-	__u16		val_out;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/if.h>
+#include <uapi/linux/mii.h>
 
 struct ethtool_cmd;
 
@@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 	return cap;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MII_H__ */