diff options
| author | Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> | 2017-12-04 15:35:05 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-12-05 20:51:19 +0300 |
| commit | bafbdd527d569c8200521f2f7579f65a044271be (patch) | |
| tree | 51db9962c079c2ca76a5e9f6d3cb2dc222999c37 /include/linux/mdio.h | |
| parent | 62b32379fd124fea521484ba7e220d8a449f0b59 (diff) | |
| download | linux-bafbdd527d569c8200521f2f7579f65a044271be.tar.xz | |
phylib: Add device reset GPIO support
The PHY devices sometimes do have their reset signal (maybe even power
supply?) tied to some GPIO and sometimes it also does happen that a boot
loader does not leave it deasserted. So far this issue has been attacked
from (as I believe) a wrong angle: by teaching the MAC driver to manipulate
the GPIO in question; that solution, when applied to the device trees, led
to adding the PHY reset GPIO properties to the MAC device node, with one
exception: Cadence MACB driver which could handle the "reset-gpios" prop
in a PHY device subnode. I believe that the correct approach is to teach
the 'phylib' to get the MDIO device reset GPIO from the device tree node
corresponding to this device -- which this patch is doing...
Note that I had to modify the AT803x PHY driver as it would stop working
otherwise -- it made use of the reset GPIO for its own purposes...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
[geert: Propagate actual errors from fwnode_get_named_gpiod()]
[geert: Avoid destroying initial setup]
[geert: Consolidate GPIO descriptor acquiring code]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/linux/mdio.h')
| -rw-r--r-- | include/linux/mdio.h | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ca08ab16ecdc..92d4e55ffe67 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -12,6 +12,7 @@ #include <uapi/linux/mdio.h> #include <linux/mod_devicetable.h> +struct gpio_desc; struct mii_bus; /* Multiple levels of nesting are possible. However typically this is @@ -39,6 +40,7 @@ struct mdio_device { /* Bus address of the MDIO device (0-31) */ int addr; int flags; + struct gpio_desc *reset; }; #define to_mdio_device(d) container_of(d, struct mdio_device, dev) @@ -71,6 +73,7 @@ void mdio_device_free(struct mdio_device *mdiodev); struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr); int mdio_device_register(struct mdio_device *mdiodev); void mdio_device_remove(struct mdio_device *mdiodev); +void mdio_device_reset(struct mdio_device *mdiodev, int value); int mdio_driver_register(struct mdio_driver *drv); void mdio_driver_unregister(struct mdio_driver *drv); int mdio_device_bus_match(struct device *dev, struct device_driver *drv); |