Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...

3 files changed, 0 insertions, 238 deletions

diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
deleted file mode 100644
index c2153049cfbd..000000000000
--- a/include/linux/i2c/adp5588.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
- *
- * Copyright 2009-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _ADP5588_H
-#define _ADP5588_H
-
-#define DEV_ID 0x00		/* Device ID */
-#define CFG 0x01		/* Configuration Register1 */
-#define INT_STAT 0x02		/* Interrupt Status Register */
-#define KEY_LCK_EC_STAT 0x03	/* Key Lock and Event Counter Register */
-#define Key_EVENTA 0x04		/* Key Event Register A */
-#define Key_EVENTB 0x05		/* Key Event Register B */
-#define Key_EVENTC 0x06		/* Key Event Register C */
-#define Key_EVENTD 0x07		/* Key Event Register D */
-#define Key_EVENTE 0x08		/* Key Event Register E */
-#define Key_EVENTF 0x09		/* Key Event Register F */
-#define Key_EVENTG 0x0A		/* Key Event Register G */
-#define Key_EVENTH 0x0B		/* Key Event Register H */
-#define Key_EVENTI 0x0C		/* Key Event Register I */
-#define Key_EVENTJ 0x0D		/* Key Event Register J */
-#define KP_LCK_TMR 0x0E		/* Keypad Lock1 to Lock2 Timer */
-#define UNLOCK1 0x0F		/* Unlock Key1 */
-#define UNLOCK2 0x10		/* Unlock Key2 */
-#define GPIO_INT_STAT1 0x11	/* GPIO Interrupt Status */
-#define GPIO_INT_STAT2 0x12	/* GPIO Interrupt Status */
-#define GPIO_INT_STAT3 0x13	/* GPIO Interrupt Status */
-#define GPIO_DAT_STAT1 0x14	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_STAT2 0x15	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_STAT3 0x16	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_OUT1 0x17	/* GPIO DATA OUT */
-#define GPIO_DAT_OUT2 0x18	/* GPIO DATA OUT */
-#define GPIO_DAT_OUT3 0x19	/* GPIO DATA OUT */
-#define GPIO_INT_EN1 0x1A	/* GPIO Interrupt Enable */
-#define GPIO_INT_EN2 0x1B	/* GPIO Interrupt Enable */
-#define GPIO_INT_EN3 0x1C	/* GPIO Interrupt Enable */
-#define KP_GPIO1 0x1D		/* Keypad or GPIO Selection */
-#define KP_GPIO2 0x1E		/* Keypad or GPIO Selection */
-#define KP_GPIO3 0x1F		/* Keypad or GPIO Selection */
-#define GPI_EM1 0x20		/* GPI Event Mode 1 */
-#define GPI_EM2 0x21		/* GPI Event Mode 2 */
-#define GPI_EM3 0x22		/* GPI Event Mode 3 */
-#define GPIO_DIR1 0x23		/* GPIO Data Direction */
-#define GPIO_DIR2 0x24		/* GPIO Data Direction */
-#define GPIO_DIR3 0x25		/* GPIO Data Direction */
-#define GPIO_INT_LVL1 0x26	/* GPIO Edge/Level Detect */
-#define GPIO_INT_LVL2 0x27	/* GPIO Edge/Level Detect */
-#define GPIO_INT_LVL3 0x28	/* GPIO Edge/Level Detect */
-#define Debounce_DIS1 0x29	/* Debounce Disable */
-#define Debounce_DIS2 0x2A	/* Debounce Disable */
-#define Debounce_DIS3 0x2B	/* Debounce Disable */
-#define GPIO_PULL1 0x2C		/* GPIO Pull Disable */
-#define GPIO_PULL2 0x2D		/* GPIO Pull Disable */
-#define GPIO_PULL3 0x2E		/* GPIO Pull Disable */
-#define CMP_CFG_STAT 0x30	/* Comparator Configuration and Status Register */
-#define CMP_CONFG_SENS1 0x31	/* Sensor1 Comparator Configuration Register */
-#define CMP_CONFG_SENS2 0x32	/* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
-#define CMP1_LVL2_TRIP 0x33	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
-#define CMP1_LVL2_HYS 0x34	/* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
-#define CMP1_LVL3_TRIP 0x35	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
-#define CMP1_LVL3_HYS 0x36	/* Sensor 2 Comparator Configuration Register */
-#define CMP2_LVL2_TRIP 0x37	/* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
-#define CMP2_LVL2_HYS 0x38	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
-#define CMP2_LVL3_TRIP 0x39	/* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
-#define CMP2_LVL3_HYS 0x3A	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
-#define CMP1_ADC_DAT_R1 0x3B	/* Comparator 1 ADC data Register1 */
-#define CMP1_ADC_DAT_R2 0x3C	/* Comparator 1 ADC data Register2 */
-#define CMP2_ADC_DAT_R1 0x3D	/* Comparator 2 ADC data Register1 */
-#define CMP2_ADC_DAT_R2 0x3E	/* Comparator 2 ADC data Register2 */
-
-#define ADP5588_DEVICE_ID_MASK	0xF
-
- /* Configuration Register1 */
-#define ADP5588_AUTO_INC	(1 << 7)
-#define ADP5588_GPIEM_CFG	(1 << 6)
-#define ADP5588_OVR_FLOW_M	(1 << 5)
-#define ADP5588_INT_CFG		(1 << 4)
-#define ADP5588_OVR_FLOW_IEN	(1 << 3)
-#define ADP5588_K_LCK_IM	(1 << 2)
-#define ADP5588_GPI_IEN		(1 << 1)
-#define ADP5588_KE_IEN		(1 << 0)
-
-/* Interrupt Status Register */
-#define ADP5588_CMP2_INT	(1 << 5)
-#define ADP5588_CMP1_INT	(1 << 4)
-#define ADP5588_OVR_FLOW_INT	(1 << 3)
-#define ADP5588_K_LCK_INT	(1 << 2)
-#define ADP5588_GPI_INT		(1 << 1)
-#define ADP5588_KE_INT		(1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define ADP5588_K_LCK_EN	(1 << 6)
-#define ADP5588_LCK21		0x30
-#define ADP5588_KEC		0xF
-
-#define ADP5588_MAXGPIO		18
-#define ADP5588_BANK(offs)	((offs) >> 3)
-#define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))
-
-/* Put one of these structures in i2c_board_info platform_data */
-
-#define ADP5588_KEYMAPSIZE	80
-
-#define GPI_PIN_ROW0 97
-#define GPI_PIN_ROW1 98
-#define GPI_PIN_ROW2 99
-#define GPI_PIN_ROW3 100
-#define GPI_PIN_ROW4 101
-#define GPI_PIN_ROW5 102
-#define GPI_PIN_ROW6 103
-#define GPI_PIN_ROW7 104
-#define GPI_PIN_COL0 105
-#define GPI_PIN_COL1 106
-#define GPI_PIN_COL2 107
-#define GPI_PIN_COL3 108
-#define GPI_PIN_COL4 109
-#define GPI_PIN_COL5 110
-#define GPI_PIN_COL6 111
-#define GPI_PIN_COL7 112
-#define GPI_PIN_COL8 113
-#define GPI_PIN_COL9 114
-
-#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
-#define GPI_PIN_ROW_END GPI_PIN_ROW7
-#define GPI_PIN_COL_BASE GPI_PIN_COL0
-#define GPI_PIN_COL_END GPI_PIN_COL9
-
-#define GPI_PIN_BASE GPI_PIN_ROW_BASE
-#define GPI_PIN_END GPI_PIN_COL_END
-
-#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
-
-struct adp5588_gpi_map {
-	unsigned short pin;
-	unsigned short sw_evt;
-};
-
-struct adp5588_kpad_platform_data {
-	int rows;			/* Number of rows */
-	int cols;			/* Number of columns */
-	const unsigned short *keymap;	/* Pointer to keymap */
-	unsigned short keymapsize;	/* Keymap size */
-	unsigned repeat:1;		/* Enable key repeat */
-	unsigned en_keylock:1;		/* Enable Key Lock feature */
-	unsigned short unlock_key1;	/* Unlock Key 1 */
-	unsigned short unlock_key2;	/* Unlock Key 2 */
-	const struct adp5588_gpi_map *gpimap;
-	unsigned short gpimapsize;
-	const struct adp5588_gpio_platform_data *gpio_data;
-};
-
-struct i2c_client; /* forward declaration */
-
-struct adp5588_gpio_platform_data {
-	int gpio_start;		/* GPIO Chip base # */
-	const char *const *names;
-	unsigned irq_base;	/* interrupt base # */
-	unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
-	int	(*setup)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	int	(*teardown)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	void	*context;
-};
-
-#endif
diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h
deleted file mode 100644
index c04bac8bf2fe..000000000000
--- a/include/linux/i2c/max732x.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __LINUX_I2C_MAX732X_H
-#define __LINUX_I2C_MAX732X_H
-
-/* platform data for the MAX732x 8/16-bit I/O expander driver */
-
-struct max732x_platform_data {
-	/* number of the first GPIO */
-	unsigned	gpio_base;
-
-	/* interrupt base */
-	int		irq_base;
-
-	void		*context;	/* param to setup/teardown */
-
-	int		(*setup)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	int		(*teardown)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-};
-#endif /* __LINUX_I2C_MAX732X_H */
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
deleted file mode 100644
index 0767a2a6b2f1..000000000000
--- a/include/linux/i2c/pcf857x.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __LINUX_PCF857X_H
-#define __LINUX_PCF857X_H
-
-/**
- * struct pcf857x_platform_data - data to set up pcf857x driver
- * @gpio_base: number of the chip's first GPIO
- * @n_latch: optional bit-inverse of initial register value; if
- *	you leave this initialized to zero the driver will act
- *	like the chip was just reset
- * @setup: optional callback issued once the GPIOs are valid
- * @teardown: optional callback issued before the GPIOs are invalidated
- * @context: optional parameter passed to setup() and teardown()
- *
- * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
- * the i2c_board_info used with the pcf875x driver must provide its
- * platform_data (pointer to one of these structures) with at least
- * the gpio_base value initialized.
- *
- * The @setup callback may be used with the kind of board-specific glue
- * which hands the (now-valid) GPIOs to other drivers, or which puts
- * devices in their initial states using these GPIOs.
- *
- * These GPIO chips are only "quasi-bidirectional"; read the chip specs
- * to understand the behavior.  They don't have separate registers to
- * record which pins are used for input or output, record which output
- * values are driven, or provide access to input values.  That must be
- * inferred by reading the chip's value and knowing the last value written
- * to it.  If you leave n_latch initialized to zero, that last written
- * value is presumed to be all ones (as if the chip were just reset).
- */
-struct pcf857x_platform_data {
-	unsigned	gpio_base;
-	unsigned	n_latch;
-
-	int		(*setup)(struct i2c_client *client,
-					int gpio, unsigned ngpio,
-					void *context);
-	int		(*teardown)(struct i2c_client *client,
-					int gpio, unsigned ngpio,
-					void *context);
-	void		*context;
-};
-
-#endif /* __LINUX_PCF857X_H */