gpiolib: allow simultaneous setting of multiple GPIO outputs

Introduce new functions gpiod_set_array & gpiod_set_raw_array to the consumer
interface which allow setting multiple outputs with just one function call.
Also add an optional set_multiple function to the driver interface. Without an
implementation of that function in the chip driver outputs are set
sequentially.

Implementing the set_multiple function in a chip driver allows for:
- Improved performance for certain use cases. The original motivation for this
  was the task of configuring an FPGA. In that specific case, where 9 GPIO
  lines have to be set many times, configuration time goes down from 48 s to
  20 s when using the new function.
- Simultaneous glitch-free setting of multiple pins on any kind of parallel
  bus attached to GPIOs provided they all reside on the same chip and bank.

Limitations:
  Performance is only improved for normal high-low outputs. Open drain and
  open source outputs are always set separately from each other. Those kinds
  of outputs could probably be accelerated in a similar way if we could
  forgo the error checking when setting GPIO directions.

Change log:
  v6: - rebase on current linux-gpio devel branch
  v5: - check can_sleep property per chip
      - remove superfluous checks
      - supplement documentation
  v4: - add gpiod_set_array function for setting logical values
      - change interface of the set_multiple driver function to use
        unsigned long as type for the bit fields
      - use generic bitops (which also use unsigned long for bit fields)
      - do not use ARCH_NR_GPIOS any more
  v3: - add documentation
      - change commit message
  v2: - use descriptor interface
      - allow arbitrary groups of GPIOs spanning multiple chips

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 38 insertions, 0 deletions

diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 12f146fa6604..83c0a61c605d 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -74,14 +74,24 @@ int gpiod_direction_output_raw(struct gpio_desc *desc, int value);
 /* Value get/set from non-sleeping context */
 int gpiod_get_value(const struct gpio_desc *desc);
 void gpiod_set_value(struct gpio_desc *desc, int value);
+void gpiod_set_array(unsigned int array_size,
+		     struct gpio_desc **desc_array, int *value_array);
 int gpiod_get_raw_value(const struct gpio_desc *desc);
 void gpiod_set_raw_value(struct gpio_desc *desc, int value);
+void gpiod_set_raw_array(unsigned int array_size,
+			 struct gpio_desc **desc_array, int *value_array);
 
 /* Value get/set from sleeping context */
 int gpiod_get_value_cansleep(const struct gpio_desc *desc);
 void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
+void gpiod_set_array_cansleep(unsigned int array_size,
+			      struct gpio_desc **desc_array,
+			      int *value_array);
 int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc);
 void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value);
+void gpiod_set_raw_array_cansleep(unsigned int array_size,
+				  struct gpio_desc **desc_array,
+				  int *value_array);
 
 int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
 
@@ -210,6 +220,13 @@ static inline void gpiod_set_value(struct gpio_desc *desc, int value)
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
+static inline void gpiod_set_array(unsigned int array_size,
+				   struct gpio_desc **desc_array,
+				   int *value_array)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
 static inline int gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
@@ -221,6 +238,13 @@ static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value)
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
+static inline void gpiod_set_raw_array(unsigned int array_size,
+				       struct gpio_desc **desc_array,
+				       int *value_array)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
 
 static inline int gpiod_get_value_cansleep(const struct gpio_desc *desc)
 {
@@ -233,6 +257,13 @@ static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
+static inline void gpiod_set_array_cansleep(unsigned int array_size,
+					    struct gpio_desc **desc_array,
+					    int *value_array)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
 static inline int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
@@ -245,6 +276,13 @@ static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc,
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
+static inline void gpiod_set_raw_array_cansleep(unsigned int array_size,
+						struct gpio_desc **desc_array,
+						int *value_array)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
 
 static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
 {