arcnet: Move files out of include/linux

These #include files don't need to be in the include/linux directory
as they can be local to drivers/net/arcnet/

Move them and update the #include statements.

Update the MAINTAINERS file pattern by deleting arcdevice from the
NETWORKING block as arcnet is currently unmaintained.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>

1 files changed, 0 insertions, 145 deletions

diff --git a/include/linux/com20020.h b/include/linux/com20020.h
deleted file mode 100644
index 85898995b234..000000000000
--- a/include/linux/com20020.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Linux ARCnet driver - COM20020 chipset support - function declarations
- * 
- * Written 1997 by David Woodhouse.
- * Written 1994-1999 by Avery Pennarun.
- * Derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- *  for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency.  This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- *
- * **********************
- *
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
-#ifndef __COM20020_H
-#define __COM20020_H
-
-int com20020_check(struct net_device *dev);
-int com20020_found(struct net_device *dev, int shared);
-extern const struct net_device_ops com20020_netdev_ops;
-
-/* The number of low I/O ports used by the card. */
-#define ARCNET_TOTAL_SIZE 8
-
-/* various register addresses */
-#ifdef CONFIG_SA1100_CT6001
-#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
-#else
-#define BUS_ALIGN  1
-#endif
-
-#define PLX_PCI_MAX_CARDS 2
-
-struct com20020_pci_channel_map {
-	u32 bar;
-	u32 offset;
-	u32 size;               /* 0x00 - auto, e.g. length of entire bar */
-};
-
-struct com20020_pci_card_info {
-	const char *name;
-	int devcount;
-
-	struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS];
-
-	unsigned int flags;
-};
-
-struct com20020_priv {
-	struct com20020_pci_card_info *ci;
-	struct list_head list_dev;
-};
-
-struct com20020_dev {
-	struct list_head list;
-	struct net_device *dev;
-
-	struct com20020_priv *pci_priv;
-	int index;
-};
-
-#define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
-#define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
-#define _COMMAND  (ioaddr+BUS_ALIGN*1)	/* standard arcnet commands */
-#define _DIAGSTAT (ioaddr+BUS_ALIGN*1)	/* diagnostic status register */
-#define _ADDR_HI  (ioaddr+BUS_ALIGN*2)	/* control registers for IO-mapped memory */
-#define _ADDR_LO  (ioaddr+BUS_ALIGN*3)
-#define _MEMDATA  (ioaddr+BUS_ALIGN*4)	/* data port for IO-mapped memory */
-#define _SUBADR   (ioaddr+BUS_ALIGN*5)	/* the extended port _XREG refers to */
-#define _CONFIG   (ioaddr+BUS_ALIGN*6)	/* configuration register */
-#define _XREG     (ioaddr+BUS_ALIGN*7)	/* extra registers (indexed by _CONFIG
-  					or _SUBADR) */
-
-/* in the ADDR_HI register */
-#define RDDATAflag	0x80	/* next access is a read (not a write) */
-
-/* in the DIAGSTAT register */
-#define NEWNXTIDflag	0x02	/* ID to which token is passed has changed */
-
-/* in the CONFIG register */
-#define RESETcfg	0x80	/* put card in reset state */
-#define TXENcfg		0x20	/* enable TX */
-
-/* in SETUP register */
-#define PROMISCset	0x10	/* enable RCV_ALL */
-#define P1MODE		0x80    /* enable P1-MODE for Backplane */
-#define SLOWARB		0x01    /* enable Slow Arbitration for >=5Mbps */
-
-/* COM2002x */
-#define SUB_TENTATIVE	0	/* tentative node ID */
-#define SUB_NODE	1	/* node ID */
-#define SUB_SETUP1	2	/* various options */
-#define SUB_TEST	3	/* test/diag register */
-
-/* COM20022 only */
-#define SUB_SETUP2	4	/* sundry options */
-#define SUB_BUSCTL	5	/* bus control options */
-#define SUB_DMACOUNT	6	/* DMA count options */
-
-#define SET_SUBADR(x) do { \
-	if ((x) < 4) \
-	{ \
-		lp->config = (lp->config & ~0x03) | (x); \
-		SETCONF; \
-	} \
-	else \
-	{ \
-		outb(x, _SUBADR); \
-	} \
-} while (0)
-
-#undef ARCRESET
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
-		    udelay(5);                        \
-		    outb(lp->config , _CONFIG);       \
-                  }
-#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG);   \
-		    udelay(5);                       \
-		    outb(0x18 , _CONFIG);            \
-                  }
-
-#define ASTATUS()	inb(_STATUS)
-#define ADIAGSTATUS()	inb(_DIAGSTAT)
-#define ACOMMAND(cmd)	outb((cmd),_COMMAND)
-#define AINTMASK(msk)	outb((msk),_INTMASK)
-
-#define SETCONF		outb(lp->config, _CONFIG)
-
-#endif /* __COM20020_H */