Merge branch 'net-phy-broadcom-cable-tester-support'

Michael Walle says:

====================
net: phy: broadcom: cable tester support

Add cable tester support for the Broadcom PHYs. Support for it was
developed on a BCM54140 Quad PHY which RDB register access.

If there is a link partner the results are not as good as with an open
cable. I guess we could retry if the measurement until all pairs had at
least one valid result.

changes since v1:
 - added Reviewed-by: tags
 - removed "div by 2" for cross shorts, just mention it in the commit
   message. The results are inconclusive if the tests are repeated. So
   just report the length as is for now.
 - fixed typo in commit message
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 52 insertions, 0 deletions

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 58d0150acc3e..d41624db6de2 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -119,6 +119,11 @@
 #define MII_BCM54XX_RDB_ADDR	0x1e
 #define MII_BCM54XX_RDB_DATA	0x1f
 
+/* legacy access control via rdb/expansion register */
+#define BCM54XX_RDB_REG0087		0x0087
+#define BCM54XX_EXP_REG7E		(MII_BCM54XX_EXP_SEL_ER + 0x7E)
+#define BCM54XX_ACCESS_MODE_LEGACY_EN	BIT(15)
+
 /*
  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
  */
@@ -294,4 +299,51 @@
 #define MII_BRCM_CORE_EXPB0	0xB0
 #define MII_BRCM_CORE_EXPB1	0xB1
 
+/* Enhanced Cable Diagnostics */
+#define BCM54XX_RDB_ECD_CTRL			0x2a0
+#define BCM54XX_EXP_ECD_CTRL			(MII_BCM54XX_EXP_SEL_ER + 0xc0)
+
+#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT3	1	/* CAT3 or worse */
+#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT5	0	/* CAT5 or better */
+#define BCM54XX_ECD_CTRL_CABLE_TYPE_MASK	BIT(0)	/* cable type */
+#define BCM54XX_ECD_CTRL_INVALID		BIT(3)	/* invalid result */
+#define BCM54XX_ECD_CTRL_UNIT_CM		0	/* centimeters */
+#define BCM54XX_ECD_CTRL_UNIT_M			1	/* meters */
+#define BCM54XX_ECD_CTRL_UNIT_MASK		BIT(10)	/* cable length unit */
+#define BCM54XX_ECD_CTRL_IN_PROGRESS		BIT(11)	/* test in progress */
+#define BCM54XX_ECD_CTRL_BREAK_LINK		BIT(12)	/* unconnect link
+							 * during test
+							 */
+#define BCM54XX_ECD_CTRL_CROSS_SHORT_DIS	BIT(13)	/* disable inter-pair
+							 * short check
+							 */
+#define BCM54XX_ECD_CTRL_RUN			BIT(15)	/* run immediate */
+
+#define BCM54XX_RDB_ECD_FAULT_TYPE		0x2a1
+#define BCM54XX_EXP_ECD_FAULT_TYPE		(MII_BCM54XX_EXP_SEL_ER + 0xc1)
+#define BCM54XX_ECD_FAULT_TYPE_INVALID		0x0
+#define BCM54XX_ECD_FAULT_TYPE_OK		0x1
+#define BCM54XX_ECD_FAULT_TYPE_OPEN		0x2
+#define BCM54XX_ECD_FAULT_TYPE_SAME_SHORT	0x3 /* short same pair */
+#define BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT	0x4 /* short different pairs */
+#define BCM54XX_ECD_FAULT_TYPE_BUSY		0x9
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK	GENMASK(3, 0)
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK	GENMASK(7, 4)
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK	GENMASK(11, 8)
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK	GENMASK(15, 12)
+#define BCM54XX_ECD_PAIR_A_LENGTH_RESULTS	0x2a2
+#define BCM54XX_ECD_PAIR_B_LENGTH_RESULTS	0x2a3
+#define BCM54XX_ECD_PAIR_C_LENGTH_RESULTS	0x2a4
+#define BCM54XX_ECD_PAIR_D_LENGTH_RESULTS	0x2a5
+
+#define BCM54XX_RDB_ECD_PAIR_A_LENGTH_RESULTS	0x2a2
+#define BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc2)
+#define BCM54XX_RDB_ECD_PAIR_B_LENGTH_RESULTS	0x2a3
+#define BCM54XX_EXP_ECD_PAIR_B_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc3)
+#define BCM54XX_RDB_ECD_PAIR_C_LENGTH_RESULTS	0x2a4
+#define BCM54XX_EXP_ECD_PAIR_C_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc4)
+#define BCM54XX_RDB_ECD_PAIR_D_LENGTH_RESULTS	0x2a5
+#define BCM54XX_EXP_ECD_PAIR_D_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc5)
+#define BCM54XX_ECD_LENGTH_RESULTS_INVALID	0xffff
+
 #endif /* _LINUX_BRCMPHY_H */