x86, um: ... and asm-x86 move

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

1 files changed, 0 insertions, 107 deletions

diff --git a/include/asm-x86/visws/piix4.h b/include/asm-x86/visws/piix4.h
deleted file mode 100644
index 61c938045ec9..000000000000
--- a/include/asm-x86/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef ASM_X86__VISWS__PIIX4_H
-#define ASM_X86__VISWS__PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define	PIIX_PM_START		0x0F80
-
-#define	SIO_GPIO_START		0x0FC0
-
-#define	SIO_PM_START		0x0FC8
-
-#define	PMBASE			PIIX_PM_START
-#define	GPIREG0			(PMBASE+0x30)
-#define	GPIREG(x)		(GPIREG0+((x)/8))
-#define	GPIBIT(x)		(1 << ((x)%8))
-
-#define	PIIX_GPI_BD_ID1		18
-#define	PIIX_GPI_BD_ID2		19
-#define	PIIX_GPI_BD_ID3		20
-#define	PIIX_GPI_BD_ID4		21
-#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
-#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
-				GPIBIT(PIIX_GPI_BD_ID2) | \
-				GPIBIT(PIIX_GPI_BD_ID3) | \
-				GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
-
-#define	SIO_INDEX		0x2e
-#define	SIO_DATA		0x2f
-
-#define	SIO_DEV_SEL		0x7
-#define	SIO_DEV_ENB		0x30
-#define	SIO_DEV_MSB		0x60
-#define	SIO_DEV_LSB		0x61
-
-#define	SIO_GP_DEV		0x7
-
-#define	SIO_GP_BASE		SIO_GPIO_START
-#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
-#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
-
-#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
-
-#define	SIO_PM_DEV		0x8
-
-#define	SIO_PM_BASE		SIO_PM_START
-#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
-#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
-#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
-#define	SIO_PM_DATA		(SIO_PM_BASE+1)
-
-#define	SIO_PM_FER2		0x1
-
-#define	SIO_PM_GP_EN		0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV		0xff
-#define SPECIAL_REG		0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state.  PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP		0x00120002
-
-#define PIIX4_RESET_PORT	0xcf9
-#define PIIX4_RESET_VAL		0x6
-
-#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
-#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
-#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
-
-#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM		(1<<15)	// Resume Status
-#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
-#define PM_STS_RTC		(1<<10)	// RTC status
-#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
-#define PM_STS_GBL		(1<<5)	// Global Status
-#define PM_STS_BM		(1<<4)	// Bus Master Status
-#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0			(0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
-
-#endif /* ASM_X86__VISWS__PIIX4_H */