Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 120 insertions, 0 deletions

diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
new file mode 100644
index 000000000000..9c3b63d0105e
--- /dev/null
+++ b/include/asm-sh/pci.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SH_PCI_H
+#define __ASM_SH_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * A board can define one or more PCI channels that represent built-in (or
+ * external) PCI controllers.
+ */
+struct pci_channel {
+	struct pci_ops *pci_ops;
+	struct resource *io_resource;
+	struct resource *mem_resource;
+	int first_devfn;
+	int last_devfn;
+};
+
+/*
+ * Each board initializes this array and terminates it with a NULL entry.
+ */
+extern struct pci_channel board_pci_channels[];
+
+#define PCIBIOS_MIN_IO		board_pci_channels->io_resource->start
+#define PCIBIOS_MIN_MEM		board_pci_channels->mem_resource->start
+
+struct pci_dev;
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ * SuperH has everything mapped statically like x86.
+ */
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+/* pci_unmap_{single,page} being a nop depends upon the
+ * configuration.
+ */
+#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+#else
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+#endif
+
+/* Not supporting more than 32-bit PCI bus addresses now, but
+ * must satisfy references to this function.  Change if needed.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	(virt_to_bus((sg)->dma_address))
+#define sg_dma_len(sg)		((sg)->length)
+
+/* Board-specific fixup routines. */
+extern void pcibios_fixup(void);
+extern void pcibios_fixup_irqs(void);
+
+#ifdef CONFIG_PCI_AUTO
+extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
+#endif
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* generic DMA-mapping stuff */
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_SH_PCI_H */
+