Merge branch 'Kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/misc

* 'Kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/misc: (36 commits)
  fs/Kconfig: move 9p out
  fs/Kconfig: move afs out
  fs/Kconfig: move coda out
  fs/Kconfig: move the rest of ncpfs out
  fs/Kconfig: move smbfs out
  fs/Kconfig: move sunrpc out
  fs/Kconfig: move nfsd out
  fs/Kconfig: move nfs out
  fs/Kconfig: move ufs out
  fs/Kconfig: move sysv out
  fs/Kconfig: move romfs out
  fs/Kconfig: move qnx4 out
  fs/Kconfig: move hpfs out
  fs/Kconfig: move omfs out
  fs/Kconfig: move minix out
  fs/Kconfig: move vxfs out
  fs/Kconfig: move squashfs out
  fs/Kconfig: move cramfs out
  fs/Kconfig: move efs out
  fs/Kconfig: move bfs out
  ...

39 files changed, 1284 insertions, 1363 deletions

diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig
new file mode 100644
index 000000000000..74e0723e90bc
--- /dev/null
+++ b/fs/9p/Kconfig
@@ -0,0 +1,10 @@
+config 9P_FS
+	tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+	depends on INET && NET_9P && EXPERIMENTAL
+	help
+	  If you say Y here, you will get experimental support for
+	  Plan 9 resource sharing via the 9P2000 protocol.
+
+	  See <http://v9fs.sf.net> for more information.
+
+	  If unsure, say N.
diff --git a/fs/Kconfig b/fs/Kconfig
index 51307b0fdf0f..93945dd0b1ae 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -27,141 +27,8 @@ config FS_MBCACHE
 	default y if EXT4_FS=y && EXT4_FS_XATTR
 	default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
 
-config REISERFS_FS
-	tristate "Reiserfs support"
-	help
-	  Stores not just filenames but the files themselves in a balanced
-	  tree.  Uses journalling.
-
-	  Balanced trees are more efficient than traditional file system
-	  architectural foundations.
-
-	  In general, ReiserFS is as fast as ext2, but is very efficient with
-	  large directories and small files.  Additional patches are needed
-	  for NFS and quotas, please see <http://www.namesys.com/> for links.
-
-	  It is more easily extended to have features currently found in
-	  database and keyword search systems than block allocation based file
-	  systems are.  The next version will be so extended, and will support
-	  plugins consistent with our motto ``It takes more than a license to
-	  make source code open.''
-
-	  Read <http://www.namesys.com/> to learn more about reiserfs.
-
-	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
-	  If you like it, you can pay us to add new features to it that you
-	  need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
-	bool "Enable reiserfs debug mode"
-	depends on REISERFS_FS
-	help
-	  If you set this to Y, then ReiserFS will perform every check it can
-	  possibly imagine of its internal consistency throughout its
-	  operation.  It will also go substantially slower.  More than once we
-	  have forgotten that this was on, and then gone despondent over the
-	  latest benchmarks.:-) Use of this option allows our team to go all
-	  out in checking for consistency when debugging without fear of its
-	  effect on end users.  If you are on the verge of sending in a bug
-	  report, say Y and you might get a useful error message.  Almost
-	  everyone should say N.
-
-config REISERFS_PROC_INFO
-	bool "Stats in /proc/fs/reiserfs"
-	depends on REISERFS_FS && PROC_FS
-	help
-	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
-	  various ReiserFS statistics and internal data at the expense of
-	  making your kernel or module slightly larger (+8 KB). This also
-	  increases the amount of kernel memory required for each mount.
-	  Almost everyone but ReiserFS developers and people fine-tuning
-	  reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
-	bool "ReiserFS extended attributes"
-	depends on REISERFS_FS
-	help
-	  Extended attributes are name:value pairs associated with inodes by
-	  the kernel or by users (see the attr(5) manual page, or visit
-	  <http://acl.bestbits.at/> for details).
-
-	  If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
-	bool "ReiserFS POSIX Access Control Lists"
-	depends on REISERFS_FS_XATTR
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config REISERFS_FS_SECURITY
-	bool "ReiserFS Security Labels"
-	depends on REISERFS_FS_XATTR
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the ReiserFS filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFS_FS
-	tristate "JFS filesystem support"
-	select NLS
-	help
-	  This is a port of IBM's Journaled Filesystem .  More information is
-	  available in the file <file:Documentation/filesystems/jfs.txt>.
-
-	  If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
-	bool "JFS POSIX Access Control Lists"
-	depends on JFS_FS
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
-	bool "JFS Security Labels"
-	depends on JFS_FS
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the jfs filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFS_DEBUG
-	bool "JFS debugging"
-	depends on JFS_FS
-	help
-	  If you are experiencing any problems with the JFS filesystem, say
-	  Y here.  This will result in additional debugging messages to be
-	  written to the system log.  Under normal circumstances, this
-	  results in very little overhead.
-
-config JFS_STATISTICS
-	bool "JFS statistics"
-	depends on JFS_FS
-	help
-	  Enabling this option will cause statistics from the JFS file system
-	  to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
 
 config FS_POSIX_ACL
 # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
@@ -182,111 +49,8 @@ config FILE_LOCKING
 
 source "fs/xfs/Kconfig"
 source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
-	tristate "OCFS2 file system support"
-	depends on NET && SYSFS
-	select CONFIGFS_FS
-	select JBD2
-	select CRC32
-	select QUOTA
-	select QUOTA_TREE
-	help
-	  OCFS2 is a general purpose extent based shared disk cluster file
-	  system with many similarities to ext3. It supports 64 bit inode
-	  numbers, and has automatically extending metadata groups which may
-	  also make it attractive for non-clustered use.
-
-	  You'll want to install the ocfs2-tools package in order to at least
-	  get "mount.ocfs2".
-
-	  Project web page:    http://oss.oracle.com/projects/ocfs2
-	  Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
-	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
-	  For more information on OCFS2, see the file
-	  <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
-	tristate "O2CB Kernelspace Clustering"
-	depends on OCFS2_FS
-	default y
-	help
-	  OCFS2 includes a simple kernelspace clustering package, the OCFS2
-	  Cluster Base.  It only requires a very small userspace component
-	  to configure it. This comes with the standard ocfs2-tools package.
-	  O2CB is limited to maintaining a cluster for OCFS2 file systems.
-	  It cannot manage any other cluster applications.
-
-	  It is always safe to say Y here, as the clustering method is
-	  run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
-	tristate "OCFS2 Userspace Clustering"
-	depends on OCFS2_FS && DLM
-	default y
-	help
-	  This option will allow OCFS2 to use userspace clustering services
-	  in conjunction with the DLM in fs/dlm.  If you are using a
-	  userspace cluster manager, say Y here.
-
-	  It is safe to say Y, as the clustering method is run-time
-	  selectable.
-
-config OCFS2_FS_STATS
-	bool "OCFS2 statistics"
-	depends on OCFS2_FS
-	default y
-	help
-	  This option allows some fs statistics to be captured. Enabling
-	  this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
-	bool "OCFS2 logging support"
-	depends on OCFS2_FS
-	default y
-	help
-	  The ocfs2 filesystem has an extensive logging system.  The system
-	  allows selection of events to log via files in /sys/o2cb/logmask/.
-	  This option will enlarge your kernel, but it allows debugging of
-	  ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
-	bool "OCFS2 expensive checks"
-	depends on OCFS2_FS
-	default n
-	help
-	  This option will enable expensive consistency checks. Enable
-	  this option for debugging only as it is likely to decrease
-	  performance of the filesystem.
-
-config OCFS2_FS_POSIX_ACL
-	bool "OCFS2 POSIX Access Control Lists"
-	depends on OCFS2_FS
-	select FS_POSIX_ACL
-	default n
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-config BTRFS_FS
-	tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
-	depends on EXPERIMENTAL
-	select LIBCRC32C
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	help
-	  Btrfs is a new filesystem with extents, writable snapshotting,
-	  support for multiple devices and many more features.
-
-	  Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
-	  FINALIZED.  You should say N here unless you are interested in
-	  testing Btrfs with non-critical data.
-
-	  To compile this file system support as a module, choose M here. The
-	  module will be called btrfs.
-
-	  If unsure, say N.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
 
 endif # BLOCK
 
@@ -348,64 +112,9 @@ config QUOTACTL
 	depends on XFS_QUOTA || QUOTA
 	default y
 
-config AUTOFS_FS
-	tristate "Kernel automounter support"
-	help
-	  The automounter is a tool to automatically mount remote file systems
-	  on demand. This implementation is partially kernel-based to reduce
-	  overhead in the already-mounted case; this is unlike the BSD
-	  automounter (amd), which is a pure user space daemon.
-
-	  To use the automounter you need the user-space tools from the autofs
-	  package; you can find the location in <file:Documentation/Changes>.
-	  You also want to answer Y to "NFS file system support", below.
-
-	  If you want to use the newer version of the automounter with more
-	  features, say N here and say Y to "Kernel automounter v4 support",
-	  below.
-
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs.
-
-	  If you are not a part of a fairly large, distributed network, you
-	  probably do not need an automounter, and can say N here.
-
-config AUTOFS4_FS
-	tristate "Kernel automounter version 4 support (also supports v3)"
-	help
-	  The automounter is a tool to automatically mount remote file systems
-	  on demand. This implementation is partially kernel-based to reduce
-	  overhead in the already-mounted case; this is unlike the BSD
-	  automounter (amd), which is a pure user space daemon.
-
-	  To use the automounter you need the user-space tools from
-	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-	  want to answer Y to "NFS file system support", below.
-
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs4.  You will need to add "alias autofs autofs4" to your
-	  modules configuration file.
-
-	  If you are not a part of a fairly large, distributed network or
-	  don't have a laptop which needs to dynamically reconfigure to the
-	  local network, you probably do not need an automounter, and can say
-	  N here.
-
-config FUSE_FS
-	tristate "FUSE (Filesystem in Userspace) support"
-	help
-	  With FUSE it is possible to implement a fully functional filesystem
-	  in a userspace program.
-
-	  There's also companion library: libfuse.  This library along with
-	  utilities is available from the FUSE homepage:
-	  <http://fuse.sourceforge.net/>
-
-	  See <file:Documentation/filesystems/fuse.txt> for more information.
-	  See <file:Documentation/Changes> for needed library/utility version.
-
-	  If you want to develop a userspace FS, or if you want to use
-	  a filesystem based on FUSE, answer Y or M.
+source "fs/autofs/Kconfig"
+source "fs/autofs4/Kconfig"
+source "fs/fuse/Kconfig"
 
 config GENERIC_ACL
 	bool
@@ -414,64 +123,8 @@ config GENERIC_ACL
 if BLOCK
 menu "CD-ROM/DVD Filesystems"
 
-config ISO9660_FS
-	tristate "ISO 9660 CDROM file system support"
-	help
-	  This is the standard file system used on CD-ROMs.  It was previously
-	  known as "High Sierra File System" and is called "hsfs" on other
-	  Unix systems.  The so-called Rock-Ridge extensions which allow for
-	  long Unix filenames and symbolic links are also supported by this
-	  driver.  If you have a CD-ROM drive and want to do more with it than
-	  just listen to audio CDs and watch its LEDs, say Y (and read
-	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>), thereby
-	  enlarging your kernel by about 27 KB; otherwise say N.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called isofs.
-
-config JOLIET
-	bool "Microsoft Joliet CDROM extensions"
-	depends on ISO9660_FS
-	select NLS
-	help
-	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
-	  which allows for long filenames in unicode format (unicode is the
-	  new 16 bit character code, successor to ASCII, which encodes the
-	  characters of almost all languages of the world; see
-	  <http://www.unicode.org/> for more information).  Say Y here if you
-	  want to be able to read Joliet CD-ROMs under Linux.
-
-config ZISOFS
-	bool "Transparent decompression extension"
-	depends on ISO9660_FS
-	select ZLIB_INFLATE
-	help
-	  This is a Linux-specific extension to RockRidge which lets you store
-	  data in compressed form on a CD-ROM and have it transparently
-	  decompressed when the CD-ROM is accessed.  See
-	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
-	  necessary to create such a filesystem.  Say Y here if you want to be
-	  able to read such compressed CD-ROMs.
-
-config UDF_FS
-	tristate "UDF file system support"
-	select CRC_ITU_T
-	help
-	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
-	  you intend to mount DVD discs or CDRW's written in packet mode, or
-	  if written to by other UDF utilities, such as DirectCD.
-	  Please read <file:Documentation/filesystems/udf.txt>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called udf.
-
-	  If unsure, say N.
-
-config UDF_NLS
-	bool
-	default y
-	depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+source "fs/isofs/Kconfig"
+source "fs/udf/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -479,182 +132,8 @@ endif # BLOCK
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
-config FAT_FS
-	tristate
-	select NLS
-	help
-	  If you want to use one of the FAT-based file systems (the MS-DOS and
-	  VFAT (Windows 95) file systems), then you must say Y or M here
-	  to include FAT support. You will then be able to mount partitions or
-	  diskettes with FAT-based file systems and transparently access the
-	  files on them, i.e. MSDOS files will look and behave just like all
-	  other Unix files.
-
-	  This FAT support is not a file system in itself, it only provides
-	  the foundation for the other file systems. You will have to say Y or
-	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
-	  order to make use of it.
-
-	  Another way to read and write MSDOS floppies and hard drive
-	  partitions from within Linux (but not transparently) is with the
-	  mtools ("man mtools") program suite. You don't need to say Y here in
-	  order to do that.
-
-	  If you need to move large files on floppies between a DOS and a
-	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
-	  file system and use GNU tar's M option. GNU tar is a program
-	  available for Unix and DOS ("man tar" or "info tar").
-
-	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
-	  say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  fat.  Note that if you compile the FAT support as a module, you
-	  cannot compile any of the FAT-based file systems into the kernel
-	  -- they will have to be modules as well.
-
-config MSDOS_FS
-	tristate "MSDOS fs support"
-	select FAT_FS
-	help
-	  This allows you to mount MSDOS partitions of your hard drive (unless
-	  they are compressed; to access compressed MSDOS partitions under
-	  Linux, you can either use the DOS emulator DOSEMU, described in the
-	  DOSEMU-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
-	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-	  intend to use dosemu with a non-compressed MSDOS partition, say Y
-	  here) and MSDOS floppies. This means that file access becomes
-	  transparent, i.e. the MSDOS files look and behave just like all
-	  other Unix files.
-
-	  If you have Windows 95 or Windows NT installed on your MSDOS
-	  partitions, you should use the VFAT file system (say Y to "VFAT fs
-	  support" below), or you will not be able to see the long filenames
-	  generated by Windows 95 / Windows NT.
-
-	  This option will enlarge your kernel by about 7 KB. If unsure,
-	  answer Y. This will only work if you said Y to "DOS FAT fs support"
-	  as well. To compile this as a module, choose M here: the module will
-	  be called msdos.
-
-config VFAT_FS
-	tristate "VFAT (Windows-95) fs support"
-	select FAT_FS
-	help
-	  This option provides support for normal Windows file systems with
-	  long filenames.  That includes non-compressed FAT-based file systems
-	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-	  programs from the mtools package.
-
-	  The VFAT support enlarges your kernel by about 10 KB and it only
-	  works if you said Y to the "DOS FAT fs support" above.  Please read
-	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
-	  unsure, say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  vfat.
-
-config FAT_DEFAULT_CODEPAGE
-	int "Default codepage for FAT"
-	depends on MSDOS_FS || VFAT_FS
-	default 437
-	help
-	  This option should be set to the codepage of your FAT filesystems.
-	  It can be overridden with the "codepage" mount option.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
-	string "Default iocharset for FAT"
-	depends on VFAT_FS
-	default "iso8859-1"
-	help
-	  Set this to the default input/output character set you'd
-	  like FAT to use. It should probably match the character set
-	  that most of your FAT filesystems use, and can be overridden
-	  with the "iocharset" mount option for FAT filesystems.
-	  Note that "utf8" is not recommended for FAT filesystems.
-	  If unsure, you shouldn't set "utf8" here.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config NTFS_FS
-	tristate "NTFS file system support"
-	select NLS
-	help
-	  NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
-
-	  Saying Y or M here enables read support.  There is partial, but
-	  safe, write support available.  For write support you must also
-	  say Y to "NTFS write support" below.
-
-	  There are also a number of user-space tools available, called
-	  ntfsprogs.  These include ntfsundelete and ntfsresize, that work
-	  without NTFS support enabled in the kernel.
-
-	  This is a rewrite from scratch of Linux NTFS support and replaced
-	  the old NTFS code starting with Linux 2.5.11.  A backport to
-	  the Linux 2.4 kernel series is separately available as a patch
-	  from the project web site.
-
-	  For more information see <file:Documentation/filesystems/ntfs.txt>
-	  and <http://www.linux-ntfs.org/>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called ntfs.
-
-	  If you are not using Windows NT, 2000, XP or 2003 in addition to
-	  Linux on your computer it is safe to say N.
-
-config NTFS_DEBUG
-	bool "NTFS debugging support"
-	depends on NTFS_FS
-	help
-	  If you are experiencing any problems with the NTFS file system, say
-	  Y here.  This will result in additional consistency checks to be
-	  performed by the driver as well as additional debugging messages to
-	  be written to the system log.  Note that debugging messages are
-	  disabled by default.  To enable them, supply the option debug_msgs=1
-	  at the kernel command line when booting the kernel or as an option
-	  to insmod when loading the ntfs module.  Once the driver is active,
-	  you can enable debugging messages by doing (as root):
-	  echo 1 > /proc/sys/fs/ntfs-debug
-	  Replacing the "1" with "0" would disable debug messages.
-
-	  If you leave debugging messages disabled, this results in little
-	  overhead, but enabling debug messages results in very significant
-	  slowdown of the system.
-
-	  When reporting bugs, please try to have available a full dump of
-	  debugging messages while the misbehaviour was occurring.
-
-config NTFS_RW
-	bool "NTFS write support"
-	depends on NTFS_FS
-	help
-	  This enables the partial, but safe, write support in the NTFS driver.
-
-	  The only supported operation is overwriting existing files, without
-	  changing the file length.  No file or directory creation, deletion or
-	  renaming is possible.  Note only non-resident files can be written to
-	  so you may find that some very small files (<500 bytes or so) cannot
-	  be written to.
-
-	  While we cannot guarantee that it will not damage any data, we have
-	  so far not received a single report where the driver would have
-	  damaged someones data so we assume it is perfectly safe to use.
-
-	  Note:  While write support is safe in this version (a rewrite from
-	  scratch of the NTFS support), it should be noted that the old NTFS
-	  write support, included in Linux 2.5.10 and before (since 1997),
-	  is not safe.
-
-	  This is currently useful with TopologiLinux.  TopologiLinux is run
-	  on top of any DOS/Microsoft Windows system without partitioning your
-	  hard disk.  Unlike other Linux distributions TopologiLinux does not
-	  need its own partition.  For more information see
-	  <http://topologi-linux.sourceforge.net/>
-
-	  It is perfectly safe to say N here.
+source "fs/fat/Kconfig"
+source "fs/ntfs/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -662,30 +141,7 @@ endif # BLOCK
 menu "Pseudo filesystems"
 
 source "fs/proc/Kconfig"
-
-config SYSFS
-	bool "sysfs file system support" if EMBEDDED
-	default y
-	help
-	The sysfs filesystem is a virtual filesystem that the kernel uses to
-	export internal kernel objects, their attributes, and their
-	relationships to one another.
-
-	Users can use sysfs to ascertain useful information about the running
-	kernel, such as the devices the kernel has discovered on each bus and
-	which driver each is bound to. sysfs can also be used to tune devices
-	and other kernel subsystems.
-
-	Some system agents rely on the information in sysfs to operate.
-	/sbin/hotplug uses device and object attributes in sysfs to assist in
-	delegating policy decisions, like persistently naming devices.
-
-	sysfs is currently used by the block subsystem to mount the root
-	partition.  If sysfs is disabled you must specify the boot device on
-	the kernel boot command line via its major and minor numbers.  For
-	example, "root=03:01" for /dev/hda1.
-
-	Designers of embedded systems may wish to say N here to conserve space.
+source "fs/sysfs/Kconfig"
 
 config TMPFS
 	bool "Virtual memory file system support (former shm fs)"
@@ -726,17 +182,7 @@ config HUGETLBFS
 config HUGETLB_PAGE
 	def_bool HUGETLBFS
 
-config CONFIGFS_FS
-	tristate "Userspace-driven configuration filesystem"
-	depends on SYSFS
-	help
-	  configfs is a ram-based filesystem that provides the converse
-	  of sysfs's functionality. Where sysfs is a filesystem-based
-	  view of kernel objects, configfs is a filesystem-based manager
-	  of kernel objects, or config_items.
-
-	  Both sysfs and configfs can and should exist together on the
-	  same system. One is not a replacement for the other.
+source "fs/configfs/Kconfig"
 
 endmenu
 
@@ -755,425 +201,27 @@ menuconfig MISC_FILESYSTEMS
 
 if MISC_FILESYSTEMS
 
-config ADFS_FS
-	tristate "ADFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  The Acorn Disc Filing System is the standard file system of the
-	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
-	  systems and the Acorn Archimedes range of machines. If you say Y
-	  here, Linux will be able to read from ADFS partitions on hard drives
-	  and from ADFS-formatted floppy discs. If you also want to be able to
-	  write to those devices, say Y to "ADFS write support" below.
-
-	  The ADFS partition should be the first partition (i.e.,
-	  /dev/[hs]d?1) on each of your drives. Please read the file
-	  <file:Documentation/filesystems/adfs.txt> for further details.
-
-	  To compile this code as a module, choose M here: the module will be
-	  called adfs.
-
-	  If unsure, say N.
-
-config ADFS_FS_RW
-	bool "ADFS write support (DANGEROUS)"
-	depends on ADFS_FS
-	help
-	  If you say Y here, you will be able to write to ADFS partitions on
-	  hard drives and ADFS-formatted floppy disks. This is experimental
-	  codes, so if you're unsure, say N.
-
-config AFFS_FS
-	tristate "Amiga FFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  The Fast File System (FFS) is the common file system used on hard
-	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
-	  if you want to be able to read and write files from and to an Amiga
-	  FFS partition on your hard drive.  Amiga floppies however cannot be
-	  read with this driver due to an incompatibility of the floppy
-	  controller used in an Amiga and the standard floppy controller in
-	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
-	  and <file:fs/affs/Changes>.
-
-	  With this driver you can also mount disk files used by Bernd
-	  Schmidt's Un*X Amiga Emulator
-	  (<http://www.freiburg.linux.de/~uae/>).
-	  If you want to do this, you will also need to say Y or M to "Loop
-	  device support", above.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called affs.  If unsure, say N.
-
-config ECRYPT_FS
-	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
-	help
-	  Encrypted filesystem that operates on the VFS layer.  See
-	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
-	  eCryptfs.  Userspace components are required and can be
-	  obtained from <http://ecryptfs.sf.net>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called ecryptfs.
-
-config HFS_FS
-	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select NLS
-	help
-	  If you say Y here, you will be able to mount Macintosh-formatted
-	  floppy disks and hard drive partitions with full read-write access.
-	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
-	  the available mount options.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called hfs.
-
-config HFSPLUS_FS
-	tristate "Apple Extended HFS file system support"
-	depends on BLOCK
-	select NLS
-	select NLS_UTF8
-	help
-	  If you say Y here, you will be able to mount extended format
-	  Macintosh-formatted hard drive partitions with full read-write access.
-
-	  This file system is often called HFS+ and was introduced with
-	  MacOS 8. It includes all Mac specific filesystem data such as
-	  data forks and creator codes, but it also has several UNIX
-	  style features such as file ownership and permissions.
-
-config BEFS_FS
-	tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select NLS
-	help
-	  The BeOS File System (BeFS) is the native file system of Be, Inc's
-	  BeOS. Notable features include support for arbitrary attributes
-	  on files and directories, and database-like indices on selected
-	  attributes. (Also note that this driver doesn't make those features
-	  available at this time). It is a 64 bit filesystem, so it supports
-	  extremely large volumes and files.
-
-	  If you use this filesystem, you should also say Y to at least one
-	  of the NLS (native language support) options below.
-
-	  If you don't know what this is about, say N.
-
-	  To compile this as a module, choose M here: the module will be
-	  called befs.
-
-config BEFS_DEBUG
-	bool "Debug BeFS"
-	depends on BEFS_FS
-	help
-	  If you say Y here, you can use the 'debug' mount option to enable
-	  debugging output from the driver.
-
-config BFS_FS
-	tristate "BFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  Boot File System (BFS) is a file system used under SCO UnixWare to
-	  allow the bootloader access to the kernel image and other important
-	  files during the boot process.  It is usually mounted under /stand
-	  and corresponds to the slice marked as "STAND" in the UnixWare
-	  partition.  You should say Y if you want to read or write the files
-	  on your /stand slice from within Linux.  You then also need to say Y
-	  to "UnixWare slices support", below.  More information about the BFS
-	  file system is contained in the file
-	  <file:Documentation/filesystems/bfs.txt>.
-
-	  If you don't know what this is about, say N.
-
-	  To compile this as a module, choose M here: the module will be called
-	  bfs.  Note that the file system of your root partition (the one
-	  containing the directory /) cannot be compiled as a module.
-
-
-
-config EFS_FS
-	tristate "EFS file system support (read only) (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
-	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
-	  uses the XFS file system for hard disk partitions however).
-
-	  This implementation only offers read-only access. If you don't know
-	  what all this is about, it's safe to say N. For more information
-	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
-	  To compile the EFS file system support as a module, choose M here: the
-	  module will be called efs.
-
+source "fs/adfs/Kconfig"
+source "fs/affs/Kconfig"
+source "fs/ecryptfs/Kconfig"
+source "fs/hfs/Kconfig"
+source "fs/hfsplus/Kconfig"
+source "fs/befs/Kconfig"
+source "fs/bfs/Kconfig"
+source "fs/efs/Kconfig"
 source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"
-
-config CRAMFS
-	tristate "Compressed ROM file system support (cramfs)"
-	depends on BLOCK
-	select ZLIB_INFLATE
-	help
-	  Saying Y here includes support for CramFs (Compressed ROM File
-	  System).  CramFs is designed to be a simple, small, and compressed
-	  file system for ROM based embedded systems.  CramFs is read-only,
-	  limited to 256MB file systems (with 16MB files), and doesn't support
-	  16/32 bits uid/gid, hard links and timestamps.
-
-	  See <file:Documentation/filesystems/cramfs.txt> and
-	  <file:fs/cramfs/README> for further information.
-
-	  To compile this as a module, choose M here: the module will be called
-	  cramfs.  Note that the root file system (the one containing the
-	  directory /) cannot be compiled as a module.
-
-	  If unsure, say N.
-
-config SQUASHFS
-	tristate "SquashFS 4.0 - Squashed file system support"
-	depends on BLOCK
-	select ZLIB_INFLATE
-	help
-	  Saying Y here includes support for SquashFS 4.0 (a Compressed
-	  Read-Only File System).  Squashfs is a highly compressed read-only
-	  filesystem for Linux.  It uses zlib compression to compress both
-	  files, inodes and directories.  Inodes in the system are very small
-	  and all blocks are packed to minimise data overhead. Block sizes
-	  greater than 4K are supported up to a maximum of 1 Mbytes (default
-	  block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
-	  (larger than 4GB), full uid/gid information, hard links and
-	  timestamps.  
-
-	  Squashfs is intended for general read-only filesystem use, for
-	  archival use (i.e. in cases where a .tar.gz file may be used), and in
-	  embedded systems where low overhead is needed.  Further information
-	  and tools are available from http://squashfs.sourceforge.net.
-
-	  If you want to compile this as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/modules.txt>.  The module
-	  will be called squashfs.  Note that the root file system (the one
-	  containing the directory /) cannot be compiled as a module.
-
-	  If unsure, say N.
-
-config SQUASHFS_EMBEDDED
-
-	bool "Additional option for memory-constrained systems" 
-	depends on SQUASHFS
-	default n
-	help
-	  Saying Y here allows you to specify cache size.
-
-	  If unsure, say N.
-
-config SQUASHFS_FRAGMENT_CACHE_SIZE
-	int "Number of fragments cached" if SQUASHFS_EMBEDDED
-	depends on SQUASHFS
-	default "3"
-	help
-	  By default SquashFS caches the last 3 fragments read from
-	  the filesystem.  Increasing this amount may mean SquashFS
-	  has to re-read fragments less often from disk, at the expense
-	  of extra system memory.  Decreasing this amount will mean
-	  SquashFS uses less memory at the expense of extra reads from disk.
-
-	  Note there must be at least one cached fragment.  Anything
-	  much more than three will probably not make much difference.
-
-config VXFS_FS
-	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
-	depends on BLOCK
-	help
-	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
-	  file system format.  VERITAS VxFS(TM) is the standard file system
-	  of SCO UnixWare (and possibly others) and optionally available
-	  for Sunsoft Solaris, HP-UX and many other operating systems.
-	  Currently only readonly access is supported.
-
-	  NOTE: the file system type as used by mount(1), mount(2) and
-	  fstab(5) is 'vxfs' as it describes the file system format, not
-	  the actual driver.
-
-	  To compile this as a module, choose M here: the module will be
-	  called freevxfs.  If unsure, say N.
-
-config MINIX_FS
-	tristate "Minix file system support"
-	depends on BLOCK
-	help
-	  Minix is a simple operating system used in many classes about OS's.
-	  The minix file system (method to organize files on a hard disk
-	  partition or a floppy disk) was the original file system for Linux,
-	  but has been superseded by the second extended file system ext2fs.
-	  You don't want to use the minix file system on your hard disk
-	  because of certain built-in restrictions, but it is sometimes found
-	  on older Linux floppy disks.  This option will enlarge your kernel
-	  by about 28 KB. If unsure, say N.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called minix.  Note that the file system of your root
-	  partition (the one containing the directory /) cannot be compiled as
-	  a module.
-
-config OMFS_FS
-	tristate "SonicBlue Optimized MPEG File System support"
-	depends on BLOCK
-	select CRC_ITU_T
-	help
-	  This is the proprietary file system used by the Rio Karma music
-	  player and ReplayTV DVR.  Despite the name, this filesystem is not
-	  more efficient than a standard FS for MPEG files, in fact likely
-	  the opposite is true.  Say Y if you have either of these devices
-	  and wish to mount its disk.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called omfs.  If unsure, say N.
-
-config HPFS_FS
-	tristate "OS/2 HPFS file system support"
-	depends on BLOCK
-	help
-	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
-	  is the file system used for organizing files on OS/2 hard disk
-	  partitions. Say Y if you want to be able to read files from and
-	  write files to an OS/2 HPFS partition on your hard drive. OS/2
-	  floppies however are in regular MSDOS format, so you don't need this
-	  option in order to be able to read them. Read
-	  <file:Documentation/filesystems/hpfs.txt>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called hpfs.  If unsure, say N.
-
-
-config QNX4FS_FS
-	tristate "QNX4 file system support (read only)"
-	depends on BLOCK
-	help
-	  This is the file system used by the real-time operating systems
-	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
-	  Further information is available at <http://www.qnx.com/>.
-	  Say Y if you intend to mount QNX hard disks or floppies.
-	  Unless you say Y to "QNX4FS read-write support" below, you will
-	  only be able to read these file systems.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called qnx4.
-
-	  If you don't know whether you need it, then you don't need it:
-	  answer N.
-
-config QNX4FS_RW
-	bool "QNX4FS write support (DANGEROUS)"
-	depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
-	help
-	  Say Y if you want to test write support for QNX4 file systems.
-
-	  It's currently broken, so for now:
-	  answer N.
-
-config ROMFS_FS
-	tristate "ROM file system support"
-	depends on BLOCK
-	---help---
-	  This is a very small read-only file system mainly intended for
-	  initial ram disks of installation disks, but it could be used for
-	  other read-only media as well.  Read
-	  <file:Documentation/filesystems/romfs.txt> for details.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called romfs.  Note that the file system of your
-	  root partition (the one containing the directory /) cannot be a
-	  module.
-
-	  If you don't know whether you need it, then you don't need it:
-	  answer N.
-
-
-config SYSV_FS
-	tristate "System V/Xenix/V7/Coherent file system support"
-	depends on BLOCK
-	help
-	  SCO, Xenix and Coherent are commercial Unix systems for Intel
-	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
-	  here would allow you to read from their floppies and hard disk
-	  partitions.
-
-	  If you have floppies or hard disk partitions like that, it is likely
-	  that they contain binaries from those other Unix systems; in order
-	  to run these binaries, you will want to install linux-abi which is
-	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
-	  UnixWare, Dell Unix and System V programs under Linux.  It is
-	  available via FTP (user: ftp) from
-	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
-	  NOTE: that will work only for binaries from Intel-based systems;
-	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
-	  If you only intend to mount files from some other Unix over the
-	  network using NFS, you don't need the System V file system support
-	  (but you need NFS file system support obviously).
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").  Note also that this option has
-	  nothing whatsoever to do with the option "System V IPC". Read about
-	  the System V file system in
-	  <file:Documentation/filesystems/sysv-fs.txt>.
-	  Saying Y here will enlarge your kernel by about 27 KB.
-
-	  To compile this as a module, choose M here: the module will be called
-	  sysv.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-
-config UFS_FS
-	tristate "UFS file system support (read only)"
-	depends on BLOCK
-	help
-	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
-	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
-	  Unixes can create and mount hard disk partitions and diskettes using
-	  this file system as well. Saying Y here will allow you to read from
-	  these partitions; if you also want to write to them, say Y to the
-	  experimental "UFS file system write support", below. Please read the
-	  file <file:Documentation/filesystems/ufs.txt> for more information.
-
-          The recently released UFS2 variant (used in FreeBSD 5.x) is
-          READ-ONLY supported.
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").
-
-	  When accessing NeXTstep files, you may need to convert them from the
-	  NeXT character set to the Latin1 character set; use the program
-	  recode ("info recode") for this purpose.
-
-	  To compile the UFS file system support as a module, choose M here: the
-	  module will be called ufs.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
-	bool "UFS file system write support (DANGEROUS)"
-	depends on UFS_FS && EXPERIMENTAL
-	help
-	  Say Y here if you want to try writing to UFS partitions. This is
-	  experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
-	bool "UFS debugging"
-	depends on UFS_FS
-	help
-	  If you are experiencing any problems with the UFS filesystem, say
-	  Y here.  This will result in _many_ additional debugging messages to be
-	  written to the system log.
+source "fs/cramfs/Kconfig"
+source "fs/squashfs/Kconfig"
+source "fs/freevxfs/Kconfig"
+source "fs/minix/Kconfig"
+source "fs/omfs/Kconfig"
+source "fs/hpfs/Kconfig"
+source "fs/qnx4/Kconfig"
+source "fs/romfs/Kconfig"
+source "fs/sysv/Kconfig"
+source "fs/ufs/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
@@ -1193,173 +241,8 @@ menuconfig NETWORK_FILESYSTEMS
 
 if NETWORK_FILESYSTEMS
 
-config NFS_FS
-	tristate "NFS client support"
-	depends on INET
-	select LOCKD
-	select SUNRPC
-	select NFS_ACL_SUPPORT if NFS_V3_ACL
-	help
-	  Choose Y here if you want to access files residing on other
-	  computers using Sun's Network File System protocol.  To compile
-	  this file system support as a module, choose M here: the module
-	  will be called nfs.
-
-	  To mount file systems exported by NFS servers, you also need to
-	  install the user space mount.nfs command which can be found in
-	  the Linux nfs-utils package, available from http://linux-nfs.org/.
-	  Information about using the mount command is available in the
-	  mount(8) man page.  More detail about the Linux NFS client
-	  implementation is available via the nfs(5) man page.
-
-	  Below you can choose which versions of the NFS protocol are
-	  available in the kernel to mount NFS servers.  Support for NFS
-	  version 2 (RFC 1094) is always available when NFS_FS is selected.
-
-	  To configure a system which mounts its root file system via NFS
-	  at boot time, say Y here, select "Kernel level IP
-	  autoconfiguration" in the NETWORK menu, and select "Root file
-	  system on NFS" below.  You cannot compile this file system as a
-	  module in this case.
-
-	  If unsure, say N.
-
-config NFS_V3
-	bool "NFS client support for NFS version 3"
-	depends on NFS_FS
-	help
-	  This option enables support for version 3 of the NFS protocol
-	  (RFC 1813) in the kernel's NFS client.
-
-	  If unsure, say Y.
-
-config NFS_V3_ACL
-	bool "NFS client support for the NFSv3 ACL protocol extension"
-	depends on NFS_V3
-	help
-	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
-	  Sun added to Solaris but never became an official part of the
-	  NFS version 3 protocol.  This protocol extension allows
-	  applications on NFS clients to manipulate POSIX Access Control
-	  Lists on files residing on NFS servers.  NFS servers enforce
-	  ACLs on local files whether this protocol is available or not.
-
-	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
-	  protocol extension and you want your NFS client to allow
-	  applications to access and modify ACLs on files on the server.
-
-	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
-	  extension.  You can choose N here or specify the "noacl" mount
-	  option to prevent your NFS client from trying to use the NFSv3
-	  ACL protocol.
-
-	  If unsure, say N.
-
-config NFS_V4
-	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFS_FS && EXPERIMENTAL
-	select RPCSEC_GSS_KRB5
-	help
-	  This option enables support for version 4 of the NFS protocol
-	  (RFC 3530) in the kernel's NFS client.
-
-	  To mount NFS servers using NFSv4, you also need to install user
-	  space programs which can be found in the Linux nfs-utils package,
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
-
-config ROOT_NFS
-	bool "Root file system on NFS"
-	depends on NFS_FS=y && IP_PNP
-	help
-	  If you want your system to mount its root file system via NFS,
-	  choose Y here.  This is common practice for managing systems
-	  without local permanent storage.  For details, read
-	  <file:Documentation/filesystems/nfsroot.txt>.
-
-	  Most people say N here.
-
-config NFSD
-	tristate "NFS server support"
-	depends on INET
-	select LOCKD
-	select SUNRPC
-	select EXPORTFS
-	select NFS_ACL_SUPPORT if NFSD_V2_ACL
-	help
-	  Choose Y here if you want to allow other computers to access
-	  files residing on this system using Sun's Network File System
-	  protocol.  To compile the NFS server support as a module,
-	  choose M here: the module will be called nfsd.
-
-	  You may choose to use a user-space NFS server instead, in which
-	  case you can choose N here.
-
-	  To export local file systems using NFS, you also need to install
-	  user space programs which can be found in the Linux nfs-utils
-	  package, available from http://linux-nfs.org/.  More detail about
-	  the Linux NFS server implementation is available via the
-	  exports(5) man page.
-
-	  Below you can choose which versions of the NFS protocol are
-	  available to clients mounting the NFS server on this system.
-	  Support for NFS version 2 (RFC 1094) is always available when
-	  CONFIG_NFSD is selected.
-
-	  If unsure, say N.
-
-config NFSD_V2_ACL
-	bool
-	depends on NFSD
-
-config NFSD_V3
-	bool "NFS server support for NFS version 3"
-	depends on NFSD
-	help
-	  This option enables support in your system's NFS server for
-	  version 3 of the NFS protocol (RFC 1813).
-
-	  If unsure, say Y.
-
-config NFSD_V3_ACL
-	bool "NFS server support for the NFSv3 ACL protocol extension"
-	depends on NFSD_V3
-	select NFSD_V2_ACL
-	help
-	  Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
-	  never became an official part of the NFS version 3 protocol.
-	  This protocol extension allows applications on NFS clients to
-	  manipulate POSIX Access Control Lists on files residing on NFS
-	  servers.  NFS servers enforce POSIX ACLs on local files whether
-	  this protocol is available or not.
-
-	  This option enables support in your system's NFS server for the
-	  NFSv3 ACL protocol extension allowing NFS clients to manipulate
-	  POSIX ACLs on files exported by your system's NFS server.  NFS
-	  clients which support the Solaris NFSv3 ACL protocol can then
-	  access and modify ACLs on your NFS server.
-
-	  To store ACLs on your NFS server, you also need to enable ACL-
-	  related CONFIG options for your local file systems of choice.
-
-	  If unsure, say N.
-
-config NFSD_V4
-	bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFSD && PROC_FS && EXPERIMENTAL
-	select NFSD_V3
-	select FS_POSIX_ACL
-	select RPCSEC_GSS_KRB5
-	help
-	  This option enables support in your system's NFS server for
-	  version 4 of the NFS protocol (RFC 3530).
-
-	  To export files using NFSv4, you need to install additional user
-	  space programs which can be found in the Linux nfs-utils package,
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
+source "fs/nfs/Kconfig"
+source "fs/nfsd/Kconfig"
 
 config LOCKD
 	tristate
@@ -1381,221 +264,13 @@ config NFS_COMMON
 	depends on NFSD || NFS_FS
 	default y
 
-config SUNRPC
-	tristate
-
-config SUNRPC_GSS
-	tristate
-
-config SUNRPC_XPRT_RDMA
-	tristate
-	depends on SUNRPC && INFINIBAND && EXPERIMENTAL
-	default SUNRPC && INFINIBAND
-	help
-	  This option enables an RPC client transport capability that
-	  allows the NFS client to mount servers via an RDMA-enabled
-	  transport.
-
-	  To compile RPC client RDMA transport support as a module,
-	  choose M here: the module will be called xprtrdma.
-
-	  If unsure, say N.
-
-config SUNRPC_REGISTER_V4
-	bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	default n
-	help
-	  Sun added support for registering RPC services at an IPv6
-	  address by creating two new versions of the rpcbind protocol
-	  (RFC 1833).
-
-	  This option enables support in the kernel RPC server for
-	  registering kernel RPC services via version 4 of the rpcbind
-	  protocol.  If you enable this option, you must run a portmapper
-	  daemon that supports rpcbind protocol version 4.
-
-	  Serving NFS over IPv6 from knfsd (the kernel's NFS server)
-	  requires that you enable this option and use a portmapper that
-	  supports rpcbind version 4.
-
-	  If unsure, say N to get traditional behavior (register kernel
-	  RPC services using only rpcbind version 2).  Distributions
-	  using the legacy Linux portmapper daemon must say N here.
-
-config RPCSEC_GSS_KRB5
-	tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	select SUNRPC_GSS
-	select CRYPTO
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CBC
-	help
-	  Choose Y here to enable Secure RPC using the Kerberos version 5
-	  GSS-API mechanism (RFC 1964).
-
-	  Secure RPC calls with Kerberos require an auxiliary user-space
-	  daemon which may be found in the Linux nfs-utils package
-	  available from http://linux-nfs.org/.  In addition, user-space
-	  Kerberos support should be installed.
-
-	  If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
-	tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	select SUNRPC_GSS
-	select CRYPTO
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CAST5
-	select CRYPTO_CBC
-	help
-	  Choose Y here to enable Secure RPC using the SPKM3 public key
-	  GSS-API mechansim (RFC 2025).
-
-	  Secure RPC calls with SPKM3 require an auxiliary userspace
-	  daemon which may be found in the Linux nfs-utils package
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
-
-config SMB_FS
-	tristate "SMB file system support (OBSOLETE, please use CIFS)"
-	depends on INET
-	select NLS
-	help
-	  SMB (Server Message Block) is the protocol Windows for Workgroups
-	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
-	  files and printers over local networks.  Saying Y here allows you to
-	  mount their file systems (often called "shares" in this context) and
-	  access them just like any other Unix directory.  Currently, this
-	  works only if the Windows machines use TCP/IP as the underlying
-	  transport protocol, and not NetBEUI.  For details, read
-	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note: if you just want your box to act as an SMB *server* and make
-	  files and printing services available to Windows clients (which need
-	  to have a TCP/IP stack), you don't need to say Y here; you can use
-	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
-	  for that.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  To compile the SMB support as a module, choose M here:
-	  the module will be called smbfs.  Most people say N, however.
-
-config SMB_NLS_DEFAULT
-	bool "Use a default NLS"
-	depends on SMB_FS
-	help
-	  Enabling this will make smbfs use nls translations by default. You
-	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
-	  settings and you need to give the default nls for the SMB server as
-	  CONFIG_SMB_NLS_REMOTE.
-
-	  The nls settings can be changed at mount time, if your smbmount
-	  supports that, using the codepage and iocharset parameters.
-
-	  smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
-	string "Default Remote NLS Option"
-	depends on SMB_NLS_DEFAULT
-	default "cp437"
-	help
-	  This setting allows you to specify a default value for which
-	  codepage the server uses. If this field is left blank no
-	  translations will be done by default. The local codepage/charset
-	  default to CONFIG_NLS_DEFAULT.
-
-	  The nls settings can be changed at mount time, if your smbmount
-	  supports that, using the codepage and iocharset parameters.
-
-	  smbmount from samba 2.2.0 or later supports this.
-
+source "net/sunrpc/Kconfig"
+source "fs/smbfs/Kconfig"
 source "fs/cifs/Kconfig"
-
-config NCP_FS
-	tristate "NCP file system support (to mount NetWare volumes)"
-	depends on IPX!=n || INET
-	help
-	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
-	  used by Novell NetWare clients to talk to file servers.  It is to
-	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
-	  to mount NetWare file server volumes and to access them just like
-	  any other Unix directory.  For details, please read the file
-	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
-	  the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
-	  You do not have to say Y here if you want your Linux box to act as a
-	  file *server* for Novell NetWare clients.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  To compile this as a module, choose M here: the module will be called
-	  ncpfs.  Say N unless you are connected to a Novell network.
-
 source "fs/ncpfs/Kconfig"
-
-config CODA_FS
-	tristate "Coda file system support (advanced network fs)"
-	depends on INET
-	help
-	  Coda is an advanced network file system, similar to NFS in that it
-	  enables you to mount file systems of a remote server and access them
-	  with regular Unix commands as if they were sitting on your hard
-	  disk.  Coda has several advantages over NFS: support for
-	  disconnected operation (e.g. for laptops), read/write server
-	  replication, security model for authentication and encryption,
-	  persistent client caches and write back caching.
-
-	  If you say Y here, your Linux box will be able to act as a Coda
-	  *client*.  You will need user level code as well, both for the
-	  client and server.  Servers are currently user level, i.e. they need
-	  no kernel support.  Please read
-	  <file:Documentation/filesystems/coda.txt> and check out the Coda
-	  home page <http://www.coda.cs.cmu.edu/>.
-
-	  To compile the coda client support as a module, choose M here: the
-	  module will be called coda.
-
-config AFS_FS
-	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
-	depends on INET && EXPERIMENTAL
-	select AF_RXRPC
-	help
-	  If you say Y here, you will get an experimental Andrew File System
-	  driver. It currently only supports unsecured read-only AFS access.
-
-	  See <file:Documentation/filesystems/afs.txt> for more information.
-
-	  If unsure, say N.
-
-config AFS_DEBUG
-	bool "AFS dynamic debugging"
-	depends on AFS_FS
-	help
-	  Say Y here to make runtime controllable debugging messages appear.
-
-	  See <file:Documentation/filesystems/afs.txt> for more information.
-
-	  If unsure, say N.
-
-config 9P_FS
-	tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
-	depends on INET && NET_9P && EXPERIMENTAL
-	help
-	  If you say Y here, you will get experimental support for
-	  Plan 9 resource sharing via the 9P2000 protocol.
-
-	  See <http://v9fs.sf.net> for more information.
-
-	  If unsure, say N.
+source "fs/coda/Kconfig"
+source "fs/afs/Kconfig"
+source "fs/9p/Kconfig"
 
 endif # NETWORK_FILESYSTEMS
 
diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig
new file mode 100644
index 000000000000..e55182a74605
--- /dev/null
+++ b/fs/adfs/Kconfig
@@ -0,0 +1,27 @@
+config ADFS_FS
+	tristate "ADFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  The Acorn Disc Filing System is the standard file system of the
+	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+	  systems and the Acorn Archimedes range of machines. If you say Y
+	  here, Linux will be able to read from ADFS partitions on hard drives
+	  and from ADFS-formatted floppy discs. If you also want to be able to
+	  write to those devices, say Y to "ADFS write support" below.
+
+	  The ADFS partition should be the first partition (i.e.,
+	  /dev/[hs]d?1) on each of your drives. Please read the file
+	  <file:Documentation/filesystems/adfs.txt> for further details.
+
+	  To compile this code as a module, choose M here: the module will be
+	  called adfs.
+
+	  If unsure, say N.
+
+config ADFS_FS_RW
+	bool "ADFS write support (DANGEROUS)"
+	depends on ADFS_FS
+	help
+	  If you say Y here, you will be able to write to ADFS partitions on
+	  hard drives and ADFS-formatted floppy disks. This is experimental
+	  codes, so if you're unsure, say N.
diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig
new file mode 100644
index 000000000000..cfad9afb4762
--- /dev/null
+++ b/fs/affs/Kconfig
@@ -0,0 +1,21 @@
+config AFFS_FS
+	tristate "Amiga FFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  The Fast File System (FFS) is the common file system used on hard
+	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
+	  if you want to be able to read and write files from and to an Amiga
+	  FFS partition on your hard drive.  Amiga floppies however cannot be
+	  read with this driver due to an incompatibility of the floppy
+	  controller used in an Amiga and the standard floppy controller in
+	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+	  and <file:fs/affs/Changes>.
+
+	  With this driver you can also mount disk files used by Bernd
+	  Schmidt's Un*X Amiga Emulator
+	  (<http://www.freiburg.linux.de/~uae/>).
+	  If you want to do this, you will also need to say Y or M to "Loop
+	  device support", above.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called affs.  If unsure, say N.
diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig
new file mode 100644
index 000000000000..e7b522fe15e1
--- /dev/null
+++ b/fs/afs/Kconfig
@@ -0,0 +1,21 @@
+config AFS_FS
+	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	select AF_RXRPC
+	help
+	  If you say Y here, you will get an experimental Andrew File System
+	  driver. It currently only supports unsecured read-only AFS access.
+
+	  See <file:Documentation/filesystems/afs.txt> for more information.
+
+	  If unsure, say N.
+
+config AFS_DEBUG
+	bool "AFS dynamic debugging"
+	depends on AFS_FS
+	help
+	  Say Y here to make runtime controllable debugging messages appear.
+
+	  See <file:Documentation/filesystems/afs.txt> for more information.
+
+	  If unsure, say N.
diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig
new file mode 100644
index 000000000000..5f3bea90911e
--- /dev/null
+++ b/fs/autofs/Kconfig
@@ -0,0 +1,21 @@
+config AUTOFS_FS
+	tristate "Kernel automounter support"
+	help
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from the autofs
+	  package; you can find the location in <file:Documentation/Changes>.
+	  You also want to answer Y to "NFS file system support", below.
+
+	  If you want to use the newer version of the automounter with more
+	  features, say N here and say Y to "Kernel automounter v4 support",
+	  below.
+
+	  To compile this support as a module, choose M here: the module will be
+	  called autofs.
+
+	  If you are not a part of a fairly large, distributed network, you
+	  probably do not need an automounter, and can say N here.
diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig
new file mode 100644
index 000000000000..1204d6384d39
--- /dev/null
+++ b/fs/autofs4/Kconfig
@@ -0,0 +1,20 @@
+config AUTOFS4_FS
+	tristate "Kernel automounter version 4 support (also supports v3)"
+	help
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from
+	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
+	  want to answer Y to "NFS file system support", below.
+
+	  To compile this support as a module, choose M here: the module will be
+	  called autofs4.  You will need to add "alias autofs autofs4" to your
+	  modules configuration file.
+
+	  If you are not a part of a fairly large, distributed network or
+	  don't have a laptop which needs to dynamically reconfigure to the
+	  local network, you probably do not need an automounter, and can say
+	  N here.
diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig
new file mode 100644
index 000000000000..7835d30f211f
--- /dev/null
+++ b/fs/befs/Kconfig
@@ -0,0 +1,26 @@
+config BEFS_FS
+	tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select NLS
+	help
+	  The BeOS File System (BeFS) is the native file system of Be, Inc's
+	  BeOS. Notable features include support for arbitrary attributes
+	  on files and directories, and database-like indices on selected
+	  attributes. (Also note that this driver doesn't make those features
+	  available at this time). It is a 64 bit filesystem, so it supports
+	  extremely large volumes and files.
+
+	  If you use this filesystem, you should also say Y to at least one
+	  of the NLS (native language support) options below.
+
+	  If you don't know what this is about, say N.
+
+	  To compile this as a module, choose M here: the module will be
+	  called befs.
+
+config BEFS_DEBUG
+	bool "Debug BeFS"
+	depends on BEFS_FS
+	help
+	  If you say Y here, you can use the 'debug' mount option to enable
+	  debugging output from the driver.
diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig
new file mode 100644
index 000000000000..c2336c62024f
--- /dev/null
+++ b/fs/bfs/Kconfig
@@ -0,0 +1,19 @@
+config BFS_FS
+	tristate "BFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  Boot File System (BFS) is a file system used under SCO UnixWare to
+	  allow the bootloader access to the kernel image and other important
+	  files during the boot process.  It is usually mounted under /stand
+	  and corresponds to the slice marked as "STAND" in the UnixWare
+	  partition.  You should say Y if you want to read or write the files
+	  on your /stand slice from within Linux.  You then also need to say Y
+	  to "UnixWare slices support", below.  More information about the BFS
+	  file system is contained in the file
+	  <file:Documentation/filesystems/bfs.txt>.
+
+	  If you don't know what this is about, say N.
+
+	  To compile this as a module, choose M here: the module will be called
+	  bfs.  Note that the file system of your root partition (the one
+	  containing the directory /) cannot be compiled as a module.
diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
new file mode 100644
index 000000000000..f8fcf999ea1b
--- /dev/null
+++ b/fs/btrfs/Kconfig
@@ -0,0 +1,18 @@
+config BTRFS_FS
+	tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
+	depends on EXPERIMENTAL
+	select LIBCRC32C
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	help
+	  Btrfs is a new filesystem with extents, writable snapshotting,
+	  support for multiple devices and many more features.
+
+	  Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
+	  FINALIZED.  You should say N here unless you are interested in
+	  testing Btrfs with non-critical data.
+
+	  To compile this file system support as a module, choose M here. The
+	  module will be called btrfs.
+
+	  If unsure, say N.
diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig
new file mode 100644
index 000000000000..c0e5a7fad06d
--- /dev/null
+++ b/fs/coda/Kconfig
@@ -0,0 +1,21 @@
+config CODA_FS
+	tristate "Coda file system support (advanced network fs)"
+	depends on INET
+	help
+	  Coda is an advanced network file system, similar to NFS in that it
+	  enables you to mount file systems of a remote server and access them
+	  with regular Unix commands as if they were sitting on your hard
+	  disk.  Coda has several advantages over NFS: support for
+	  disconnected operation (e.g. for laptops), read/write server
+	  replication, security model for authentication and encryption,
+	  persistent client caches and write back caching.
+
+	  If you say Y here, your Linux box will be able to act as a Coda
+	  *client*.  You will need user level code as well, both for the
+	  client and server.  Servers are currently user level, i.e. they need
+	  no kernel support.  Please read
+	  <file:Documentation/filesystems/coda.txt> and check out the Coda
+	  home page <http://www.coda.cs.cmu.edu/>.
+
+	  To compile the coda client support as a module, choose M here: the
+	  module will be called coda.
diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig
new file mode 100644
index 000000000000..13587cc97a0b
--- /dev/null
+++ b/fs/configfs/Kconfig
@@ -0,0 +1,11 @@
+config CONFIGFS_FS
+	tristate "Userspace-driven configuration filesystem"
+	depends on SYSFS
+	help
+	  configfs is a ram-based filesystem that provides the converse
+	  of sysfs's functionality. Where sysfs is a filesystem-based
+	  view of kernel objects, configfs is a filesystem-based manager
+	  of kernel objects, or config_items.
+
+	  Both sysfs and configfs can and should exist together on the
+	  same system. One is not a replacement for the other.
diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig
new file mode 100644
index 000000000000..cd06466f365e
--- /dev/null
+++ b/fs/cramfs/Kconfig
@@ -0,0 +1,19 @@
+config CRAMFS
+	tristate "Compressed ROM file system support (cramfs)"
+	depends on BLOCK
+	select ZLIB_INFLATE
+	help
+	  Saying Y here includes support for CramFs (Compressed ROM File
+	  System).  CramFs is designed to be a simple, small, and compressed
+	  file system for ROM based embedded systems.  CramFs is read-only,
+	  limited to 256MB file systems (with 16MB files), and doesn't support
+	  16/32 bits uid/gid, hard links and timestamps.
+
+	  See <file:Documentation/filesystems/cramfs.txt> and
+	  <file:fs/cramfs/README> for further information.
+
+	  To compile this as a module, choose M here: the module will be called
+	  cramfs.  Note that the root file system (the one containing the
+	  directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
new file mode 100644
index 000000000000..0c754e64232b
--- /dev/null
+++ b/fs/ecryptfs/Kconfig
@@ -0,0 +1,11 @@
+config ECRYPT_FS
+	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+	help
+	  Encrypted filesystem that operates on the VFS layer.  See
+	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
+	  eCryptfs.  Userspace components are required and can be
+	  obtained from <http://ecryptfs.sf.net>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called ecryptfs.
diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig
new file mode 100644
index 000000000000..6ebfc1c207a8
--- /dev/null
+++ b/fs/efs/Kconfig
@@ -0,0 +1,14 @@
+config EFS_FS
+	tristate "EFS file system support (read only) (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+	  uses the XFS file system for hard disk partitions however).
+
+	  This implementation only offers read-only access. If you don't know
+	  what all this is about, it's safe to say N. For more information
+	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+	  To compile the EFS file system support as a module, choose M here: the
+	  module will be called efs.
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
new file mode 100644
index 000000000000..d0a69ff25375
--- /dev/null
+++ b/fs/fat/Kconfig
@@ -0,0 +1,97 @@
+config FAT_FS
+	tristate
+	select NLS
+	help
+	  If you want to use one of the FAT-based file systems (the MS-DOS and
+	  VFAT (Windows 95) file systems), then you must say Y or M here
+	  to include FAT support. You will then be able to mount partitions or
+	  diskettes with FAT-based file systems and transparently access the
+	  files on them, i.e. MSDOS files will look and behave just like all
+	  other Unix files.
+
+	  This FAT support is not a file system in itself, it only provides
+	  the foundation for the other file systems. You will have to say Y or
+	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
+	  order to make use of it.
+
+	  Another way to read and write MSDOS floppies and hard drive
+	  partitions from within Linux (but not transparently) is with the
+	  mtools ("man mtools") program suite. You don't need to say Y here in
+	  order to do that.
+
+	  If you need to move large files on floppies between a DOS and a
+	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
+	  file system and use GNU tar's M option. GNU tar is a program
+	  available for Unix and DOS ("man tar" or "info tar").
+
+	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
+	  say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  fat.  Note that if you compile the FAT support as a module, you
+	  cannot compile any of the FAT-based file systems into the kernel
+	  -- they will have to be modules as well.
+
+config MSDOS_FS
+	tristate "MSDOS fs support"
+	select FAT_FS
+	help
+	  This allows you to mount MSDOS partitions of your hard drive (unless
+	  they are compressed; to access compressed MSDOS partitions under
+	  Linux, you can either use the DOS emulator DOSEMU, described in the
+	  DOSEMU-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+	  intend to use dosemu with a non-compressed MSDOS partition, say Y
+	  here) and MSDOS floppies. This means that file access becomes
+	  transparent, i.e. the MSDOS files look and behave just like all
+	  other Unix files.
+
+	  If you have Windows 95 or Windows NT installed on your MSDOS
+	  partitions, you should use the VFAT file system (say Y to "VFAT fs
+	  support" below), or you will not be able to see the long filenames
+	  generated by Windows 95 / Windows NT.
+
+	  This option will enlarge your kernel by about 7 KB. If unsure,
+	  answer Y. This will only work if you said Y to "DOS FAT fs support"
+	  as well. To compile this as a module, choose M here: the module will
+	  be called msdos.
+
+config VFAT_FS
+	tristate "VFAT (Windows-95) fs support"
+	select FAT_FS
+	help
+	  This option provides support for normal Windows file systems with
+	  long filenames.  That includes non-compressed FAT-based file systems
+	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+	  programs from the mtools package.
+
+	  The VFAT support enlarges your kernel by about 10 KB and it only
+	  works if you said Y to the "DOS FAT fs support" above.  Please read
+	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+	  unsure, say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  vfat.
+
+config FAT_DEFAULT_CODEPAGE
+	int "Default codepage for FAT"
+	depends on MSDOS_FS || VFAT_FS
+	default 437
+	help
+	  This option should be set to the codepage of your FAT filesystems.
+	  It can be overridden with the "codepage" mount option.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+	string "Default iocharset for FAT"
+	depends on VFAT_FS
+	default "iso8859-1"
+	help
+	  Set this to the default input/output character set you'd
+	  like FAT to use. It should probably match the character set
+	  that most of your FAT filesystems use, and can be overridden
+	  with the "iocharset" mount option for FAT filesystems.
+	  Note that "utf8" is not recommended for FAT filesystems.
+	  If unsure, you shouldn't set "utf8" here.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig
new file mode 100644
index 000000000000..8dc1cd5c1efe
--- /dev/null
+++ b/fs/freevxfs/Kconfig
@@ -0,0 +1,16 @@
+config VXFS_FS
+	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+	depends on BLOCK
+	help
+	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+	  file system format.  VERITAS VxFS(TM) is the standard file system
+	  of SCO UnixWare (and possibly others) and optionally available
+	  for Sunsoft Solaris, HP-UX and many other operating systems.
+	  Currently only readonly access is supported.
+
+	  NOTE: the file system type as used by mount(1), mount(2) and
+	  fstab(5) is 'vxfs' as it describes the file system format, not
+	  the actual driver.
+
+	  To compile this as a module, choose M here: the module will be
+	  called freevxfs.  If unsure, say N.
diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
new file mode 100644
index 000000000000..0cf160a94eda
--- /dev/null
+++ b/fs/fuse/Kconfig
@@ -0,0 +1,15 @@
+config FUSE_FS
+	tristate "FUSE (Filesystem in Userspace) support"
+	help
+	  With FUSE it is possible to implement a fully functional filesystem
+	  in a userspace program.
+
+	  There's also companion library: libfuse.  This library along with
+	  utilities is available from the FUSE homepage:
+	  <http://fuse.sourceforge.net/>
+
+	  See <file:Documentation/filesystems/fuse.txt> for more information.
+	  See <file:Documentation/Changes> for needed library/utility version.
+
+	  If you want to develop a userspace FS, or if you want to use
+	  a filesystem based on FUSE, answer Y or M.
diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig
new file mode 100644
index 000000000000..b77c5bc20f8a
--- /dev/null
+++ b/fs/hfs/Kconfig
@@ -0,0 +1,12 @@
+config HFS_FS
+	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select NLS
+	help
+	  If you say Y here, you will be able to mount Macintosh-formatted
+	  floppy disks and hard drive partitions with full read-write access.
+	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
+	  the available mount options.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called hfs.
diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig
new file mode 100644
index 000000000000..a63371815aab
--- /dev/null
+++ b/fs/hfsplus/Kconfig
@@ -0,0 +1,13 @@
+config HFSPLUS_FS
+	tristate "Apple Extended HFS file system support"
+	depends on BLOCK
+	select NLS
+	select NLS_UTF8
+	help
+	  If you say Y here, you will be able to mount extended format
+	  Macintosh-formatted hard drive partitions with full read-write access.
+
+	  This file system is often called HFS+ and was introduced with
+	  MacOS 8. It includes all Mac specific filesystem data such as
+	  data forks and creator codes, but it also has several UNIX
+	  style features such as file ownership and permissions.
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
new file mode 100644
index 000000000000..56bd15c5bf6c
--- /dev/null
+++ b/fs/hpfs/Kconfig
@@ -0,0 +1,14 @@
+config HPFS_FS
+	tristate "OS/2 HPFS file system support"
+	depends on BLOCK
+	help
+	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+	  is the file system used for organizing files on OS/2 hard disk
+	  partitions. Say Y if you want to be able to read files from and
+	  write files to an OS/2 HPFS partition on your hard drive. OS/2
+	  floppies however are in regular MSDOS format, so you don't need this
+	  option in order to be able to read them. Read
+	  <file:Documentation/filesystems/hpfs.txt>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called hpfs.  If unsure, say N.
diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig
new file mode 100644
index 000000000000..8ab9878e3671
--- /dev/null
+++ b/fs/isofs/Kconfig
@@ -0,0 +1,39 @@
+config ISO9660_FS
+	tristate "ISO 9660 CDROM file system support"
+	help
+	  This is the standard file system used on CD-ROMs.  It was previously
+	  known as "High Sierra File System" and is called "hsfs" on other
+	  Unix systems.  The so-called Rock-Ridge extensions which allow for
+	  long Unix filenames and symbolic links are also supported by this
+	  driver.  If you have a CD-ROM drive and want to do more with it than
+	  just listen to audio CDs and watch its LEDs, say Y (and read
+	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>), thereby
+	  enlarging your kernel by about 27 KB; otherwise say N.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called isofs.
+
+config JOLIET
+	bool "Microsoft Joliet CDROM extensions"
+	depends on ISO9660_FS
+	select NLS
+	help
+	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+	  which allows for long filenames in unicode format (unicode is the
+	  new 16 bit character code, successor to ASCII, which encodes the
+	  characters of almost all languages of the world; see
+	  <http://www.unicode.org/> for more information).  Say Y here if you
+	  want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+	bool "Transparent decompression extension"
+	depends on ISO9660_FS
+	select ZLIB_INFLATE
+	help
+	  This is a Linux-specific extension to RockRidge which lets you store
+	  data in compressed form on a CD-ROM and have it transparently
+	  decompressed when the CD-ROM is accessed.  See
+	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+	  necessary to create such a filesystem.  Say Y here if you want to be
+	  able to read such compressed CD-ROMs.
diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig
new file mode 100644
index 000000000000..9ff619a6f9cc
--- /dev/null
+++ b/fs/jfs/Kconfig
@@ -0,0 +1,49 @@
+config JFS_FS
+	tristate "JFS filesystem support"
+	select NLS
+	help
+	  This is a port of IBM's Journaled Filesystem .  More information is
+	  available in the file <file:Documentation/filesystems/jfs.txt>.
+
+	  If you do not intend to use the JFS filesystem, say N.
+
+config JFS_POSIX_ACL
+	bool "JFS POSIX Access Control Lists"
+	depends on JFS_FS
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config JFS_SECURITY
+	bool "JFS Security Labels"
+	depends on JFS_FS
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the jfs filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
+
+config JFS_DEBUG
+	bool "JFS debugging"
+	depends on JFS_FS
+	help
+	  If you are experiencing any problems with the JFS filesystem, say
+	  Y here.  This will result in additional debugging messages to be
+	  written to the system log.  Under normal circumstances, this
+	  results in very little overhead.
+
+config JFS_STATISTICS
+	bool "JFS statistics"
+	depends on JFS_FS
+	help
+	  Enabling this option will cause statistics from the JFS file system
+	  to be made available to the user in the /proc/fs/jfs/ directory.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
new file mode 100644
index 000000000000..0fd7ca994264
--- /dev/null
+++ b/fs/minix/Kconfig
@@ -0,0 +1,17 @@
+config MINIX_FS
+	tristate "Minix file system support"
+	depends on BLOCK
+	help
+	  Minix is a simple operating system used in many classes about OS's.
+	  The minix file system (method to organize files on a hard disk
+	  partition or a floppy disk) was the original file system for Linux,
+	  but has been superseded by the second extended file system ext2fs.
+	  You don't want to use the minix file system on your hard disk
+	  because of certain built-in restrictions, but it is sometimes found
+	  on older Linux floppy disks.  This option will enlarge your kernel
+	  by about 28 KB. If unsure, say N.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called minix.  Note that the file system of your root
+	  partition (the one containing the directory /) cannot be compiled as
+	  a module.
diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig
index 142808427b25..c931cf22a1f6 100644
--- a/fs/ncpfs/Kconfig
+++ b/fs/ncpfs/Kconfig
@@ -1,6 +1,27 @@
 #
 # NCP Filesystem configuration
 #
+config NCP_FS
+	tristate "NCP file system support (to mount NetWare volumes)"
+	depends on IPX!=n || INET
+	help
+	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+	  used by Novell NetWare clients to talk to file servers.  It is to
+	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
+	  to mount NetWare file server volumes and to access them just like
+	  any other Unix directory.  For details, please read the file
+	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+	  the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
+
+	  You do not have to say Y here if you want your Linux box to act as a
+	  file *server* for Novell NetWare clients.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  To compile this as a module, choose M here: the module will be called
+	  ncpfs.  Say N unless you are connected to a Novell network.
+
 config NCPFS_PACKET_SIGNING
 	bool "Packet signatures"
 	depends on NCP_FS
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
new file mode 100644
index 000000000000..36fe20d6eba2
--- /dev/null
+++ b/fs/nfs/Kconfig
@@ -0,0 +1,86 @@
+config NFS_FS
+	tristate "NFS client support"
+	depends on INET
+	select LOCKD
+	select SUNRPC
+	select NFS_ACL_SUPPORT if NFS_V3_ACL
+	help
+	  Choose Y here if you want to access files residing on other
+	  computers using Sun's Network File System protocol.  To compile
+	  this file system support as a module, choose M here: the module
+	  will be called nfs.
+
+	  To mount file systems exported by NFS servers, you also need to
+	  install the user space mount.nfs command which can be found in
+	  the Linux nfs-utils package, available from http://linux-nfs.org/.
+	  Information about using the mount command is available in the
+	  mount(8) man page.  More detail about the Linux NFS client
+	  implementation is available via the nfs(5) man page.
+
+	  Below you can choose which versions of the NFS protocol are
+	  available in the kernel to mount NFS servers.  Support for NFS
+	  version 2 (RFC 1094) is always available when NFS_FS is selected.
+
+	  To configure a system which mounts its root file system via NFS
+	  at boot time, say Y here, select "Kernel level IP
+	  autoconfiguration" in the NETWORK menu, and select "Root file
+	  system on NFS" below.  You cannot compile this file system as a
+	  module in this case.
+
+	  If unsure, say N.
+
+config NFS_V3
+	bool "NFS client support for NFS version 3"
+	depends on NFS_FS
+	help
+	  This option enables support for version 3 of the NFS protocol
+	  (RFC 1813) in the kernel's NFS client.
+
+	  If unsure, say Y.
+
+config NFS_V3_ACL
+	bool "NFS client support for the NFSv3 ACL protocol extension"
+	depends on NFS_V3
+	help
+	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
+	  Sun added to Solaris but never became an official part of the
+	  NFS version 3 protocol.  This protocol extension allows
+	  applications on NFS clients to manipulate POSIX Access Control
+	  Lists on files residing on NFS servers.  NFS servers enforce
+	  ACLs on local files whether this protocol is available or not.
+
+	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
+	  protocol extension and you want your NFS client to allow
+	  applications to access and modify ACLs on files on the server.
+
+	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
+	  extension.  You can choose N here or specify the "noacl" mount
+	  option to prevent your NFS client from trying to use the NFSv3
+	  ACL protocol.
+
+	  If unsure, say N.
+
+config NFS_V4
+	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
+	depends on NFS_FS && EXPERIMENTAL
+	select RPCSEC_GSS_KRB5
+	help
+	  This option enables support for version 4 of the NFS protocol
+	  (RFC 3530) in the kernel's NFS client.
+
+	  To mount NFS servers using NFSv4, you also need to install user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
+
+config ROOT_NFS
+	bool "Root file system on NFS"
+	depends on NFS_FS=y && IP_PNP
+	help
+	  If you want your system to mount its root file system via NFS,
+	  choose Y here.  This is common practice for managing systems
+	  without local permanent storage.  For details, read
+	  <file:Documentation/filesystems/nfsroot.txt>.
+
+	  Most people say N here.
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
new file mode 100644
index 000000000000..44d7d04dab95
--- /dev/null
+++ b/fs/nfsd/Kconfig
@@ -0,0 +1,80 @@
+config NFSD
+	tristate "NFS server support"
+	depends on INET
+	select LOCKD
+	select SUNRPC
+	select EXPORTFS
+	select NFS_ACL_SUPPORT if NFSD_V2_ACL
+	help
+	  Choose Y here if you want to allow other computers to access
+	  files residing on this system using Sun's Network File System
+	  protocol.  To compile the NFS server support as a module,
+	  choose M here: the module will be called nfsd.
+
+	  You may choose to use a user-space NFS server instead, in which
+	  case you can choose N here.
+
+	  To export local file systems using NFS, you also need to install
+	  user space programs which can be found in the Linux nfs-utils
+	  package, available from http://linux-nfs.org/.  More detail about
+	  the Linux NFS server implementation is available via the
+	  exports(5) man page.
+
+	  Below you can choose which versions of the NFS protocol are
+	  available to clients mounting the NFS server on this system.
+	  Support for NFS version 2 (RFC 1094) is always available when
+	  CONFIG_NFSD is selected.
+
+	  If unsure, say N.
+
+config NFSD_V2_ACL
+	bool
+	depends on NFSD
+
+config NFSD_V3
+	bool "NFS server support for NFS version 3"
+	depends on NFSD
+	help
+	  This option enables support in your system's NFS server for
+	  version 3 of the NFS protocol (RFC 1813).
+
+	  If unsure, say Y.
+
+config NFSD_V3_ACL
+	bool "NFS server support for the NFSv3 ACL protocol extension"
+	depends on NFSD_V3
+	select NFSD_V2_ACL
+	help
+	  Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
+	  never became an official part of the NFS version 3 protocol.
+	  This protocol extension allows applications on NFS clients to
+	  manipulate POSIX Access Control Lists on files residing on NFS
+	  servers.  NFS servers enforce POSIX ACLs on local files whether
+	  this protocol is available or not.
+
+	  This option enables support in your system's NFS server for the
+	  NFSv3 ACL protocol extension allowing NFS clients to manipulate
+	  POSIX ACLs on files exported by your system's NFS server.  NFS
+	  clients which support the Solaris NFSv3 ACL protocol can then
+	  access and modify ACLs on your NFS server.
+
+	  To store ACLs on your NFS server, you also need to enable ACL-
+	  related CONFIG options for your local file systems of choice.
+
+	  If unsure, say N.
+
+config NFSD_V4
+	bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
+	depends on NFSD && PROC_FS && EXPERIMENTAL
+	select NFSD_V3
+	select FS_POSIX_ACL
+	select RPCSEC_GSS_KRB5
+	help
+	  This option enables support in your system's NFS server for
+	  version 4 of the NFS protocol (RFC 3530).
+
+	  To export files using NFSv4, you need to install additional user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig
new file mode 100644
index 000000000000..f5a868cc9152
--- /dev/null
+++ b/fs/ntfs/Kconfig
@@ -0,0 +1,78 @@
+config NTFS_FS
+	tristate "NTFS file system support"
+	select NLS
+	help
+	  NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
+
+	  Saying Y or M here enables read support.  There is partial, but
+	  safe, write support available.  For write support you must also
+	  say Y to "NTFS write support" below.
+
+	  There are also a number of user-space tools available, called
+	  ntfsprogs.  These include ntfsundelete and ntfsresize, that work
+	  without NTFS support enabled in the kernel.
+
+	  This is a rewrite from scratch of Linux NTFS support and replaced
+	  the old NTFS code starting with Linux 2.5.11.  A backport to
+	  the Linux 2.4 kernel series is separately available as a patch
+	  from the project web site.
+
+	  For more information see <file:Documentation/filesystems/ntfs.txt>
+	  and <http://www.linux-ntfs.org/>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called ntfs.
+
+	  If you are not using Windows NT, 2000, XP or 2003 in addition to
+	  Linux on your computer it is safe to say N.
+
+config NTFS_DEBUG
+	bool "NTFS debugging support"
+	depends on NTFS_FS
+	help
+	  If you are experiencing any problems with the NTFS file system, say
+	  Y here.  This will result in additional consistency checks to be
+	  performed by the driver as well as additional debugging messages to
+	  be written to the system log.  Note that debugging messages are
+	  disabled by default.  To enable them, supply the option debug_msgs=1
+	  at the kernel command line when booting the kernel or as an option
+	  to insmod when loading the ntfs module.  Once the driver is active,
+	  you can enable debugging messages by doing (as root):
+	  echo 1 > /proc/sys/fs/ntfs-debug
+	  Replacing the "1" with "0" would disable debug messages.
+
+	  If you leave debugging messages disabled, this results in little
+	  overhead, but enabling debug messages results in very significant
+	  slowdown of the system.
+
+	  When reporting bugs, please try to have available a full dump of
+	  debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+	bool "NTFS write support"
+	depends on NTFS_FS
+	help
+	  This enables the partial, but safe, write support in the NTFS driver.
+
+	  The only supported operation is overwriting existing files, without
+	  changing the file length.  No file or directory creation, deletion or
+	  renaming is possible.  Note only non-resident files can be written to
+	  so you may find that some very small files (<500 bytes or so) cannot
+	  be written to.
+
+	  While we cannot guarantee that it will not damage any data, we have
+	  so far not received a single report where the driver would have
+	  damaged someones data so we assume it is perfectly safe to use.
+
+	  Note:  While write support is safe in this version (a rewrite from
+	  scratch of the NTFS support), it should be noted that the old NTFS
+	  write support, included in Linux 2.5.10 and before (since 1997),
+	  is not safe.
+
+	  This is currently useful with TopologiLinux.  TopologiLinux is run
+	  on top of any DOS/Microsoft Windows system without partitioning your
+	  hard disk.  Unlike other Linux distributions TopologiLinux does not
+	  need its own partition.  For more information see
+	  <http://topologi-linux.sourceforge.net/>
+
+	  It is perfectly safe to say N here.
diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig
new file mode 100644
index 000000000000..701b7a3a872e
--- /dev/null
+++ b/fs/ocfs2/Kconfig
@@ -0,0 +1,85 @@
+config OCFS2_FS
+	tristate "OCFS2 file system support"
+	depends on NET && SYSFS
+	select CONFIGFS_FS
+	select JBD2
+	select CRC32
+	select QUOTA
+	select QUOTA_TREE
+	help
+	  OCFS2 is a general purpose extent based shared disk cluster file
+	  system with many similarities to ext3. It supports 64 bit inode
+	  numbers, and has automatically extending metadata groups which may
+	  also make it attractive for non-clustered use.
+
+	  You'll want to install the ocfs2-tools package in order to at least
+	  get "mount.ocfs2".
+
+	  Project web page:    http://oss.oracle.com/projects/ocfs2
+	  Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+
+	  For more information on OCFS2, see the file
+	  <file:Documentation/filesystems/ocfs2.txt>.
+
+config OCFS2_FS_O2CB
+	tristate "O2CB Kernelspace Clustering"
+	depends on OCFS2_FS
+	default y
+	help
+	  OCFS2 includes a simple kernelspace clustering package, the OCFS2
+	  Cluster Base.  It only requires a very small userspace component
+	  to configure it. This comes with the standard ocfs2-tools package.
+	  O2CB is limited to maintaining a cluster for OCFS2 file systems.
+	  It cannot manage any other cluster applications.
+
+	  It is always safe to say Y here, as the clustering method is
+	  run-time selectable.
+
+config OCFS2_FS_USERSPACE_CLUSTER
+	tristate "OCFS2 Userspace Clustering"
+	depends on OCFS2_FS && DLM
+	default y
+	help
+	  This option will allow OCFS2 to use userspace clustering services
+	  in conjunction with the DLM in fs/dlm.  If you are using a
+	  userspace cluster manager, say Y here.
+
+	  It is safe to say Y, as the clustering method is run-time
+	  selectable.
+
+config OCFS2_FS_STATS
+	bool "OCFS2 statistics"
+	depends on OCFS2_FS
+	default y
+	help
+	  This option allows some fs statistics to be captured. Enabling
+	  this option may increase the memory consumption.
+
+config OCFS2_DEBUG_MASKLOG
+	bool "OCFS2 logging support"
+	depends on OCFS2_FS
+	default y
+	help
+	  The ocfs2 filesystem has an extensive logging system.  The system
+	  allows selection of events to log via files in /sys/o2cb/logmask/.
+	  This option will enlarge your kernel, but it allows debugging of
+	  ocfs2 filesystem issues.
+
+config OCFS2_DEBUG_FS
+	bool "OCFS2 expensive checks"
+	depends on OCFS2_FS
+	default n
+	help
+	  This option will enable expensive consistency checks. Enable
+	  this option for debugging only as it is likely to decrease
+	  performance of the filesystem.
+
+config OCFS2_FS_POSIX_ACL
+	bool "OCFS2 POSIX Access Control Lists"
+	depends on OCFS2_FS
+	select FS_POSIX_ACL
+	default n
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig
new file mode 100644
index 000000000000..b1b9a0aba6fd
--- /dev/null
+++ b/fs/omfs/Kconfig
@@ -0,0 +1,13 @@
+config OMFS_FS
+	tristate "SonicBlue Optimized MPEG File System support"
+	depends on BLOCK
+	select CRC_ITU_T
+	help
+	  This is the proprietary file system used by the Rio Karma music
+	  player and ReplayTV DVR.  Despite the name, this filesystem is not
+	  more efficient than a standard FS for MPEG files, in fact likely
+	  the opposite is true.  Say Y if you have either of these devices
+	  and wish to mount its disk.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called omfs.  If unsure, say N.
diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig
new file mode 100644
index 000000000000..be8e0e1445b6
--- /dev/null
+++ b/fs/qnx4/Kconfig
@@ -0,0 +1,25 @@
+config QNX4FS_FS
+	tristate "QNX4 file system support (read only)"
+	depends on BLOCK
+	help
+	  This is the file system used by the real-time operating systems
+	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
+	  Further information is available at <http://www.qnx.com/>.
+	  Say Y if you intend to mount QNX hard disks or floppies.
+	  Unless you say Y to "QNX4FS read-write support" below, you will
+	  only be able to read these file systems.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called qnx4.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
+
+config QNX4FS_RW
+	bool "QNX4FS write support (DANGEROUS)"
+	depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
+	help
+	  Say Y if you want to test write support for QNX4 file systems.
+
+	  It's currently broken, so for now:
+	  answer N.
diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
new file mode 100644
index 000000000000..949b8c6addc8
--- /dev/null
+++ b/fs/reiserfs/Kconfig
@@ -0,0 +1,85 @@
+config REISERFS_FS
+	tristate "Reiserfs support"
+	help
+	  Stores not just filenames but the files themselves in a balanced
+	  tree.  Uses journalling.
+
+	  Balanced trees are more efficient than traditional file system
+	  architectural foundations.
+
+	  In general, ReiserFS is as fast as ext2, but is very efficient with
+	  large directories and small files.  Additional patches are needed
+	  for NFS and quotas, please see <http://www.namesys.com/> for links.
+
+	  It is more easily extended to have features currently found in
+	  database and keyword search systems than block allocation based file
+	  systems are.  The next version will be so extended, and will support
+	  plugins consistent with our motto ``It takes more than a license to
+	  make source code open.''
+
+	  Read <http://www.namesys.com/> to learn more about reiserfs.
+
+	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+	  If you like it, you can pay us to add new features to it that you
+	  need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+	bool "Enable reiserfs debug mode"
+	depends on REISERFS_FS
+	help
+	  If you set this to Y, then ReiserFS will perform every check it can
+	  possibly imagine of its internal consistency throughout its
+	  operation.  It will also go substantially slower.  More than once we
+	  have forgotten that this was on, and then gone despondent over the
+	  latest benchmarks.:-) Use of this option allows our team to go all
+	  out in checking for consistency when debugging without fear of its
+	  effect on end users.  If you are on the verge of sending in a bug
+	  report, say Y and you might get a useful error message.  Almost
+	  everyone should say N.
+
+config REISERFS_PROC_INFO
+	bool "Stats in /proc/fs/reiserfs"
+	depends on REISERFS_FS && PROC_FS
+	help
+	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
+	  various ReiserFS statistics and internal data at the expense of
+	  making your kernel or module slightly larger (+8 KB). This also
+	  increases the amount of kernel memory required for each mount.
+	  Almost everyone but ReiserFS developers and people fine-tuning
+	  reiserfs or tracing problems should say N.
+
+config REISERFS_FS_XATTR
+	bool "ReiserFS extended attributes"
+	depends on REISERFS_FS
+	help
+	  Extended attributes are name:value pairs associated with inodes by
+	  the kernel or by users (see the attr(5) manual page, or visit
+	  <http://acl.bestbits.at/> for details).
+
+	  If unsure, say N.
+
+config REISERFS_FS_POSIX_ACL
+	bool "ReiserFS POSIX Access Control Lists"
+	depends on REISERFS_FS_XATTR
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config REISERFS_FS_SECURITY
+	bool "ReiserFS Security Labels"
+	depends on REISERFS_FS_XATTR
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the ReiserFS filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig
new file mode 100644
index 000000000000..1a17020f9faf
--- /dev/null
+++ b/fs/romfs/Kconfig
@@ -0,0 +1,16 @@
+config ROMFS_FS
+	tristate "ROM file system support"
+	depends on BLOCK
+	---help---
+	  This is a very small read-only file system mainly intended for
+	  initial ram disks of installation disks, but it could be used for
+	  other read-only media as well.  Read
+	  <file:Documentation/filesystems/romfs.txt> for details.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called romfs.  Note that the file system of your
+	  root partition (the one containing the directory /) cannot be a
+	  module.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig
new file mode 100644
index 000000000000..e668127c8b2e
--- /dev/null
+++ b/fs/smbfs/Kconfig
@@ -0,0 +1,55 @@
+config SMB_FS
+	tristate "SMB file system support (OBSOLETE, please use CIFS)"
+	depends on INET
+	select NLS
+	help
+	  SMB (Server Message Block) is the protocol Windows for Workgroups
+	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+	  files and printers over local networks.  Saying Y here allows you to
+	  mount their file systems (often called "shares" in this context) and
+	  access them just like any other Unix directory.  Currently, this
+	  works only if the Windows machines use TCP/IP as the underlying
+	  transport protocol, and not NetBEUI.  For details, read
+	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note: if you just want your box to act as an SMB *server* and make
+	  files and printing services available to Windows clients (which need
+	  to have a TCP/IP stack), you don't need to say Y here; you can use
+	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+	  for that.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  To compile the SMB support as a module, choose M here:
+	  the module will be called smbfs.  Most people say N, however.
+
+config SMB_NLS_DEFAULT
+	bool "Use a default NLS"
+	depends on SMB_FS
+	help
+	  Enabling this will make smbfs use nls translations by default. You
+	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+	  settings and you need to give the default nls for the SMB server as
+	  CONFIG_SMB_NLS_REMOTE.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+	string "Default Remote NLS Option"
+	depends on SMB_NLS_DEFAULT
+	default "cp437"
+	help
+	  This setting allows you to specify a default value for which
+	  codepage the server uses. If this field is left blank no
+	  translations will be done by default. The local codepage/charset
+	  default to CONFIG_NLS_DEFAULT.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
new file mode 100644
index 000000000000..25a00d19d686
--- /dev/null
+++ b/fs/squashfs/Kconfig
@@ -0,0 +1,51 @@
+config SQUASHFS
+	tristate "SquashFS 4.0 - Squashed file system support"
+	depends on BLOCK
+	select ZLIB_INFLATE
+	help
+	  Saying Y here includes support for SquashFS 4.0 (a Compressed
+	  Read-Only File System).  Squashfs is a highly compressed read-only
+	  filesystem for Linux.  It uses zlib compression to compress both
+	  files, inodes and directories.  Inodes in the system are very small
+	  and all blocks are packed to minimise data overhead. Block sizes
+	  greater than 4K are supported up to a maximum of 1 Mbytes (default
+	  block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
+	  (larger than 4GB), full uid/gid information, hard links and
+	  timestamps.  
+
+	  Squashfs is intended for general read-only filesystem use, for
+	  archival use (i.e. in cases where a .tar.gz file may be used), and in
+	  embedded systems where low overhead is needed.  Further information
+	  and tools are available from http://squashfs.sourceforge.net.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called squashfs.  Note that the root file system (the one
+	  containing the directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+	bool "Additional option for memory-constrained systems" 
+	depends on SQUASHFS
+	default n
+	help
+	  Saying Y here allows you to specify cache size.
+
+	  If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+	int "Number of fragments cached" if SQUASHFS_EMBEDDED
+	depends on SQUASHFS
+	default "3"
+	help
+	  By default SquashFS caches the last 3 fragments read from
+	  the filesystem.  Increasing this amount may mean SquashFS
+	  has to re-read fragments less often from disk, at the expense
+	  of extra system memory.  Decreasing this amount will mean
+	  SquashFS uses less memory at the expense of extra reads from disk.
+
+	  Note there must be at least one cached fragment.  Anything
+	  much more than three will probably not make much difference.
diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig
new file mode 100644
index 000000000000..f4b67588b9d6
--- /dev/null
+++ b/fs/sysfs/Kconfig
@@ -0,0 +1,23 @@
+config SYSFS
+	bool "sysfs file system support" if EMBEDDED
+	default y
+	help
+	The sysfs filesystem is a virtual filesystem that the kernel uses to
+	export internal kernel objects, their attributes, and their
+	relationships to one another.
+
+	Users can use sysfs to ascertain useful information about the running
+	kernel, such as the devices the kernel has discovered on each bus and
+	which driver each is bound to. sysfs can also be used to tune devices
+	and other kernel subsystems.
+
+	Some system agents rely on the information in sysfs to operate.
+	/sbin/hotplug uses device and object attributes in sysfs to assist in
+	delegating policy decisions, like persistently naming devices.
+
+	sysfs is currently used by the block subsystem to mount the root
+	partition.  If sysfs is disabled you must specify the boot device on
+	the kernel boot command line via its major and minor numbers.  For
+	example, "root=03:01" for /dev/hda1.
+
+	Designers of embedded systems may wish to say N here to conserve space.
diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig
new file mode 100644
index 000000000000..33aeb4b75db1
--- /dev/null
+++ b/fs/sysv/Kconfig
@@ -0,0 +1,36 @@
+config SYSV_FS
+	tristate "System V/Xenix/V7/Coherent file system support"
+	depends on BLOCK
+	help
+	  SCO, Xenix and Coherent are commercial Unix systems for Intel
+	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
+	  here would allow you to read from their floppies and hard disk
+	  partitions.
+
+	  If you have floppies or hard disk partitions like that, it is likely
+	  that they contain binaries from those other Unix systems; in order
+	  to run these binaries, you will want to install linux-abi which is
+	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
+	  UnixWare, Dell Unix and System V programs under Linux.  It is
+	  available via FTP (user: ftp) from
+	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+	  NOTE: that will work only for binaries from Intel-based systems;
+	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+	  If you only intend to mount files from some other Unix over the
+	  network using NFS, you don't need the System V file system support
+	  (but you need NFS file system support obviously).
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").  Note also that this option has
+	  nothing whatsoever to do with the option "System V IPC". Read about
+	  the System V file system in
+	  <file:Documentation/filesystems/sysv-fs.txt>.
+	  Saying Y here will enlarge your kernel by about 27 KB.
+
+	  To compile this as a module, choose M here: the module will be called
+	  sysv.
+
+	  If you haven't heard about all of this before, it's safe to say N.
diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig
new file mode 100644
index 000000000000..0e0e99bd6bce
--- /dev/null
+++ b/fs/udf/Kconfig
@@ -0,0 +1,18 @@
+config UDF_FS
+	tristate "UDF file system support"
+	select CRC_ITU_T
+	help
+	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
+	  you intend to mount DVD discs or CDRW's written in packet mode, or
+	  if written to by other UDF utilities, such as DirectCD.
+	  Please read <file:Documentation/filesystems/udf.txt>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called udf.
+
+	  If unsure, say N.
+
+config UDF_NLS
+	bool
+	default y
+	depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig
new file mode 100644
index 000000000000..e4f10a40768a
--- /dev/null
+++ b/fs/ufs/Kconfig
@@ -0,0 +1,43 @@
+config UFS_FS
+	tristate "UFS file system support (read only)"
+	depends on BLOCK
+	help
+	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
+	  Unixes can create and mount hard disk partitions and diskettes using
+	  this file system as well. Saying Y here will allow you to read from
+	  these partitions; if you also want to write to them, say Y to the
+	  experimental "UFS file system write support", below. Please read the
+	  file <file:Documentation/filesystems/ufs.txt> for more information.
+
+          The recently released UFS2 variant (used in FreeBSD 5.x) is
+          READ-ONLY supported.
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").
+
+	  When accessing NeXTstep files, you may need to convert them from the
+	  NeXT character set to the Latin1 character set; use the program
+	  recode ("info recode") for this purpose.
+
+	  To compile the UFS file system support as a module, choose M here: the
+	  module will be called ufs.
+
+	  If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+	bool "UFS file system write support (DANGEROUS)"
+	depends on UFS_FS && EXPERIMENTAL
+	help
+	  Say Y here if you want to try writing to UFS partitions. This is
+	  experimental, so you should back up your UFS partitions beforehand.
+
+config UFS_DEBUG
+	bool "UFS debugging"
+	depends on UFS_FS
+	help
+	  If you are experiencing any problems with the UFS filesystem, say
+	  Y here.  This will result in _many_ additional debugging messages to be
+	  written to the system log.