[PATCH] Add pselect/ppoll system call implementation

The following implementation of ppoll() and pselect() system calls
depends on the architecture providing a TIF_RESTORE_SIGMASK flag in the
thread_info.

These system calls have to change the signal mask during their
operation, and signal handlers must be invoked using the new, temporary
signal mask. The old signal mask must be restored either upon successful
exit from the system call, or upon returning from the invoked signal
handler if the system call is interrupted. We can't simply restore the
original signal mask and return to userspace, since the restored signal
mask may actually block the signal which interrupted the system call.

The TIF_RESTORE_SIGMASK flag deals with this by causing the syscall exit
path to trap into do_signal() just as TIF_SIGPENDING does, and by
causing do_signal() to use the saved signal mask instead of the current
signal mask when setting up the stack frame for the signal handler -- or
by causing do_signal() to simply restore the saved signal mask in the
case where there is no handler to be invoked.

The first patch implements the sys_pselect() and sys_ppoll() system
calls, which are present only if TIF_RESTORE_SIGMASK is defined. That
#ifdef should go away in time when all architectures have implemented
it. The second patch implements TIF_RESTORE_SIGMASK for the PowerPC
kernel (in the -mm tree), and the third patch then removes the
arch-specific implementations of sys_rt_sigsuspend() and replaces them
with generic versions using the same trick.

The fourth and fifth patches, provided by David Howells, implement
TIF_RESTORE_SIGMASK for FR-V and i386 respectively, and the sixth patch
adds the syscalls to the i386 syscall table.

This patch:

Add the pselect() and ppoll() system calls, providing core routines usable by
the original select() and poll() system calls and also the new calls (with
their semantics w.r.t timeouts).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 291 insertions, 57 deletions

diff --git a/fs/select.c b/fs/select.c
index f10a10317d54..c0f02d36c60e 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -179,12 +179,11 @@ get_max:
 #define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
 #define POLLEX_SET (POLLPRI)
 
-int do_select(int n, fd_set_bits *fds, long *timeout)
+int do_select(int n, fd_set_bits *fds, s64 *timeout)
 {
 	struct poll_wqueues table;
 	poll_table *wait;
 	int retval, i;
-	long __timeout = *timeout;
 
 	rcu_read_lock();
 	retval = max_select_fd(n, fds);
@@ -196,11 +195,12 @@ int do_select(int n, fd_set_bits *fds, long *timeout)
 
 	poll_initwait(&table);
 	wait = &table.pt;
-	if (!__timeout)
+	if (!*timeout)
 		wait = NULL;
 	retval = 0;
 	for (;;) {
 		unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
+		long __timeout;
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
@@ -255,22 +255,32 @@ int do_select(int n, fd_set_bits *fds, long *timeout)
 				*rexp = res_ex;
 		}
 		wait = NULL;
-		if (retval || !__timeout || signal_pending(current))
+		if (retval || !*timeout || signal_pending(current))
 			break;
 		if(table.error) {
 			retval = table.error;
 			break;
 		}
+
+		if (*timeout < 0) {
+			/* Wait indefinitely */
+			__timeout = MAX_SCHEDULE_TIMEOUT;
+		} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT - 1)) {
+			/* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in a loop */
+			__timeout = MAX_SCHEDULE_TIMEOUT - 1;
+			*timeout -= __timeout;
+		} else {
+			__timeout = *timeout;
+			*timeout = 0;
+		}
 		__timeout = schedule_timeout(__timeout);
+		if (*timeout >= 0)
+			*timeout += __timeout;
 	}
 	__set_current_state(TASK_RUNNING);
 
 	poll_freewait(&table);
 
-	/*
-	 * Up-to-date the caller timeout.
-	 */
-	*timeout = __timeout;
 	return retval;
 }
 
@@ -295,36 +305,14 @@ static void select_bits_free(void *bits, int size)
 #define MAX_SELECT_SECONDS \
 	((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
 
-asmlinkage long
-sys_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp)
+static int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+			   fd_set __user *exp, s64 *timeout)
 {
 	fd_set_bits fds;
 	char *bits;
-	long timeout;
 	int ret, size, max_fdset;
 	struct fdtable *fdt;
 
-	timeout = MAX_SCHEDULE_TIMEOUT;
-	if (tvp) {
-		time_t sec, usec;
-
-		if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
-		    || __get_user(sec, &tvp->tv_sec)
-		    || __get_user(usec, &tvp->tv_usec)) {
-			ret = -EFAULT;
-			goto out_nofds;
-		}
-
-		ret = -EINVAL;
-		if (sec < 0 || usec < 0)
-			goto out_nofds;
-
-		if ((unsigned long) sec < MAX_SELECT_SECONDS) {
-			timeout = ROUND_UP(usec, 1000000/HZ);
-			timeout += sec * (unsigned long) HZ;
-		}
-	}
-
 	ret = -EINVAL;
 	if (n < 0)
 		goto out_nofds;
@@ -362,18 +350,7 @@ sys_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, s
 	zero_fd_set(n, fds.res_out);
 	zero_fd_set(n, fds.res_ex);
 
-	ret = do_select(n, &fds, &timeout);
-
-	if (tvp && !(current->personality & STICKY_TIMEOUTS)) {
-		time_t sec = 0, usec = 0;
-		if (timeout) {
-			sec = timeout / HZ;
-			usec = timeout % HZ;
-			usec *= (1000000/HZ);
-		}
-		put_user(sec, &tvp->tv_sec);
-		put_user(usec, &tvp->tv_usec);
-	}
+	ret = do_select(n, &fds, timeout);
 
 	if (ret < 0)
 		goto out;
@@ -395,6 +372,154 @@ out_nofds:
 	return ret;
 }
 
+asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+			fd_set __user *exp, struct timeval __user *tvp)
+{
+	s64 timeout = -1;
+	struct timeval tv;
+	int ret;
+
+	if (tvp) {
+		if (copy_from_user(&tv, tvp, sizeof(tv)))
+			return -EFAULT;
+
+		if (tv.tv_sec < 0 || tv.tv_usec < 0)
+			return -EINVAL;
+
+		/* Cast to u64 to make GCC stop complaining */
+		if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
+			timeout = -1;	/* infinite */
+		else {
+			timeout = ROUND_UP(tv.tv_usec, USEC_PER_SEC/HZ);
+			timeout += tv.tv_sec * HZ;
+		}
+	}
+
+	ret = core_sys_select(n, inp, outp, exp, &timeout);
+
+	if (tvp) {
+		if (current->personality & STICKY_TIMEOUTS)
+			goto sticky;
+		tv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
+		tv.tv_sec = timeout;
+		if (copy_to_user(tvp, &tv, sizeof(tv))) {
+sticky:
+			/*
+			 * If an application puts its timeval in read-only
+			 * memory, we don't want the Linux-specific update to
+			 * the timeval to cause a fault after the select has
+			 * completed successfully. However, because we're not
+			 * updating the timeval, we can't restart the system
+			 * call.
+			 */
+			if (ret == -ERESTARTNOHAND)
+				ret = -EINTR;
+		}
+	}
+
+	return ret;
+}
+
+#ifdef TIF_RESTORE_SIGMASK
+asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
+		fd_set __user *exp, struct timespec __user *tsp,
+		const sigset_t __user *sigmask, size_t sigsetsize)
+{
+	s64 timeout = MAX_SCHEDULE_TIMEOUT;
+	sigset_t ksigmask, sigsaved;
+	struct timespec ts;
+	int ret;
+
+	if (tsp) {
+		if (copy_from_user(&ts, tsp, sizeof(ts)))
+			return -EFAULT;
+
+		if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+			return -EINVAL;
+
+		/* Cast to u64 to make GCC stop complaining */
+		if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
+			timeout = -1;	/* infinite */
+		else {
+			timeout = ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
+			timeout += ts.tv_sec * HZ;
+		}
+	}
+
+	if (sigmask) {
+		/* XXX: Don't preclude handling different sized sigset_t's.  */
+		if (sigsetsize != sizeof(sigset_t))
+			return -EINVAL;
+		if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask)))
+			return -EFAULT;
+
+		sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
+		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
+	}
+
+	ret = core_sys_select(n, inp, outp, exp, &timeout);
+
+	if (tsp) {
+		if (current->personality & STICKY_TIMEOUTS)
+			goto sticky;
+		ts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) * 1000;
+		ts.tv_sec = timeout;
+		if (copy_to_user(tsp, &ts, sizeof(ts))) {
+sticky:
+			/*
+			 * If an application puts its timeval in read-only
+			 * memory, we don't want the Linux-specific update to
+			 * the timeval to cause a fault after the select has
+			 * completed successfully. However, because we're not
+			 * updating the timeval, we can't restart the system
+			 * call.
+			 */
+			if (ret == -ERESTARTNOHAND)
+				ret = -EINTR;
+		}
+	}
+
+	if (ret == -ERESTARTNOHAND) {
+		/*
+		 * Don't restore the signal mask yet. Let do_signal() deliver
+		 * the signal on the way back to userspace, before the signal
+		 * mask is restored.
+		 */
+		if (sigmask) {
+			memcpy(&current->saved_sigmask, &sigsaved,
+					sizeof(sigsaved));
+			set_thread_flag(TIF_RESTORE_SIGMASK);
+		}
+	} else if (sigmask)
+		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
+
+	return ret;
+}
+
+/*
+ * Most architectures can't handle 7-argument syscalls. So we provide a
+ * 6-argument version where the sixth argument is a pointer to a structure
+ * which has a pointer to the sigset_t itself followed by a size_t containing
+ * the sigset size.
+ */
+asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
+	fd_set __user *exp, struct timespec __user *tsp, void __user *sig)
+{
+	size_t sigsetsize = 0;
+	sigset_t __user *up = NULL;
+
+	if (sig) {
+		if (!access_ok(VERIFY_READ, sig, sizeof(void *)+sizeof(size_t))
+		    || __get_user(up, (sigset_t * __user *)sig)
+		    || __get_user(sigsetsize,
+				(size_t * __user)(sig+sizeof(void *))))
+			return -EFAULT;
+	}
+
+	return sys_pselect7(n, inp, outp, exp, tsp, up, sigsetsize);
+}
+#endif /* TIF_RESTORE_SIGMASK */
+
 struct poll_list {
 	struct poll_list *next;
 	int len;
@@ -436,16 +561,19 @@ static void do_pollfd(unsigned int num, struct pollfd * fdpage,
 }
 
 static int do_poll(unsigned int nfds,  struct poll_list *list,
-			struct poll_wqueues *wait, long timeout)
+		   struct poll_wqueues *wait, s64 *timeout)
 {
 	int count = 0;
 	poll_table* pt = &wait->pt;
 
-	if (!timeout)
+	/* Optimise the no-wait case */
+	if (!(*timeout))
 		pt = NULL;
  
 	for (;;) {
 		struct poll_list *walk;
+		long __timeout;
+
 		set_current_state(TASK_INTERRUPTIBLE);
 		walk = list;
 		while(walk != NULL) {
@@ -453,18 +581,36 @@ static int do_poll(unsigned int nfds,  struct poll_list *list,
 			walk = walk->next;
 		}
 		pt = NULL;
-		if (count || !timeout || signal_pending(current))
+		if (count || !*timeout || signal_pending(current))
 			break;
 		count = wait->error;
 		if (count)
 			break;
-		timeout = schedule_timeout(timeout);
+
+		if (*timeout < 0) {
+			/* Wait indefinitely */
+			__timeout = MAX_SCHEDULE_TIMEOUT;
+		} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT-1)) {
+			/*
+			 * Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in
+			 * a loop
+			 */
+			__timeout = MAX_SCHEDULE_TIMEOUT - 1;
+			*timeout -= __timeout;
+		} else {
+			__timeout = *timeout;
+			*timeout = 0;
+		}
+
+		__timeout = schedule_timeout(__timeout);
+		if (*timeout >= 0)
+			*timeout += __timeout;
 	}
 	__set_current_state(TASK_RUNNING);
 	return count;
 }
 
-asmlinkage long sys_poll(struct pollfd __user * ufds, unsigned int nfds, long timeout)
+int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
 {
 	struct poll_wqueues table;
  	int fdcount, err;
@@ -482,14 +628,6 @@ asmlinkage long sys_poll(struct pollfd __user * ufds, unsigned int nfds, long ti
 	if (nfds > max_fdset && nfds > OPEN_MAX)
 		return -EINVAL;
 
-	if (timeout) {
-		/* Careful about overflow in the intermediate values */
-		if ((unsigned long) timeout < MAX_SCHEDULE_TIMEOUT / HZ)
-			timeout = (unsigned long)(timeout*HZ+999)/1000+1;
-		else /* Negative or overflow */
-			timeout = MAX_SCHEDULE_TIMEOUT;
-	}
-
 	poll_initwait(&table);
 
 	head = NULL;
@@ -519,6 +657,7 @@ asmlinkage long sys_poll(struct pollfd __user * ufds, unsigned int nfds, long ti
 		}
 		i -= pp->len;
 	}
+
 	fdcount = do_poll(nfds, head, &table, timeout);
 
 	/* OK, now copy the revents fields back to user space. */
@@ -547,3 +686,98 @@ out_fds:
 	poll_freewait(&table);
 	return err;
 }
+
+asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
+			long timeout_msecs)
+{
+	s64 timeout_jiffies = 0;
+
+	if (timeout_msecs) {
+#if HZ > 1000
+		/* We can only overflow if HZ > 1000 */
+		if (timeout_msecs / 1000 > (s64)0x7fffffffffffffffULL / (s64)HZ)
+			timeout_jiffies = -1;
+		else
+#endif
+			timeout_jiffies = msecs_to_jiffies(timeout_msecs);
+	}
+
+	return do_sys_poll(ufds, nfds, &timeout_jiffies);
+}
+
+#ifdef TIF_RESTORE_SIGMASK
+asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
+	struct timespec __user *tsp, const sigset_t __user *sigmask,
+	size_t sigsetsize)
+{
+	sigset_t ksigmask, sigsaved;
+	struct timespec ts;
+	s64 timeout = -1;
+	int ret;
+
+	if (tsp) {
+		if (copy_from_user(&ts, tsp, sizeof(ts)))
+			return -EFAULT;
+
+		/* Cast to u64 to make GCC stop complaining */
+		if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
+			timeout = -1;	/* infinite */
+		else {
+			timeout = ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
+			timeout += ts.tv_sec * HZ;
+		}
+	}
+
+	if (sigmask) {
+		/* XXX: Don't preclude handling different sized sigset_t's.  */
+		if (sigsetsize != sizeof(sigset_t))
+			return -EINVAL;
+		if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask)))
+			return -EFAULT;
+
+		sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
+		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
+	}
+
+	ret = do_sys_poll(ufds, nfds, &timeout);
+
+	/* We can restart this syscall, usually */
+	if (ret == -EINTR) {
+		/*
+		 * Don't restore the signal mask yet. Let do_signal() deliver
+		 * the signal on the way back to userspace, before the signal
+		 * mask is restored.
+		 */
+		if (sigmask) {
+			memcpy(&current->saved_sigmask, &sigsaved,
+					sizeof(sigsaved));
+			set_thread_flag(TIF_RESTORE_SIGMASK);
+		}
+		ret = -ERESTARTNOHAND;
+	} else if (sigmask)
+		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
+
+	if (tsp && timeout >= 0) {
+		if (current->personality & STICKY_TIMEOUTS)
+			goto sticky;
+		/* Yes, we know it's actually an s64, but it's also positive. */
+		ts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) * 1000;
+		ts.tv_sec = timeout;
+		if (copy_to_user(tsp, &ts, sizeof(ts))) {
+		sticky:
+			/*
+			 * If an application puts its timeval in read-only
+			 * memory, we don't want the Linux-specific update to
+			 * the timeval to cause a fault after the select has
+			 * completed successfully. However, because we're not
+			 * updating the timeval, we can't restart the system
+			 * call.
+			 */
+			if (ret == -ERESTARTNOHAND && timeout >= 0)
+				ret = -EINTR;
+		}
+	}
+
+	return ret;
+}
+#endif /* TIF_RESTORE_SIGMASK */