diff options
author | Jakub Kicinski <kubakici@wp.pl> | 2014-04-02 14:33:17 +0400 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2014-04-11 16:58:07 +0400 |
commit | 7dc86605a28066bc7e99b2ce009af8cb07282505 (patch) | |
tree | 5015bc773d9973620416403c233a2beca390b7ba /drivers | |
parent | 8f12c0348397ee69af33fc8973b687d83a8759dc (diff) | |
download | linux-7dc86605a28066bc7e99b2ce009af8cb07282505.tar.xz |
e1000: remove debug messages with function names
e1000_hw.c contains a lot of debug messages which print
name of invoked function and contain no new line character
at the end. Remove them as equivalent information can be
nowadays obtained using function tracer.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_hw.c | 124 |
1 files changed, 0 insertions, 124 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index 2879b9631e15..c1d3fdb296a0 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -115,8 +115,6 @@ static DEFINE_SPINLOCK(e1000_phy_lock); */ static s32 e1000_set_phy_type(struct e1000_hw *hw) { - e_dbg("e1000_set_phy_type"); - if (hw->mac_type == e1000_undefined) return -E1000_ERR_PHY_TYPE; @@ -159,8 +157,6 @@ static void e1000_phy_init_script(struct e1000_hw *hw) u32 ret_val; u16 phy_saved_data; - e_dbg("e1000_phy_init_script"); - if (hw->phy_init_script) { msleep(20); @@ -253,8 +249,6 @@ static void e1000_phy_init_script(struct e1000_hw *hw) */ s32 e1000_set_mac_type(struct e1000_hw *hw) { - e_dbg("e1000_set_mac_type"); - switch (hw->device_id) { case E1000_DEV_ID_82542: switch (hw->revision_id) { @@ -365,8 +359,6 @@ void e1000_set_media_type(struct e1000_hw *hw) { u32 status; - e_dbg("e1000_set_media_type"); - if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ hw->tbi_compatibility_en = false; @@ -415,8 +407,6 @@ s32 e1000_reset_hw(struct e1000_hw *hw) u32 led_ctrl; s32 ret_val; - e_dbg("e1000_reset_hw"); - /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ if (hw->mac_type == e1000_82542_rev2_0) { e_dbg("Disabling MWI on 82542 rev 2.0\n"); @@ -566,8 +556,6 @@ s32 e1000_init_hw(struct e1000_hw *hw) u32 mta_size; u32 ctrl_ext; - e_dbg("e1000_init_hw"); - /* Initialize Identification LED */ ret_val = e1000_id_led_init(hw); if (ret_val) { @@ -683,8 +671,6 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) u16 eeprom_data; s32 ret_val; - e_dbg("e1000_adjust_serdes_amplitude"); - if (hw->media_type != e1000_media_type_internal_serdes) return E1000_SUCCESS; @@ -730,8 +716,6 @@ s32 e1000_setup_link(struct e1000_hw *hw) s32 ret_val; u16 eeprom_data; - e_dbg("e1000_setup_link"); - /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -848,8 +832,6 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) u32 signal = 0; s32 ret_val; - e_dbg("e1000_setup_fiber_serdes_link"); - /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -1051,8 +1033,6 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_preconfig"); - ctrl = er32(CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to * what the PHY speed and duplex configuration is. In addition, we need @@ -1112,8 +1092,6 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_igp_setup"); - if (hw->phy_reset_disable) return E1000_SUCCESS; @@ -1254,8 +1232,6 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_mgp_setup"); - if (hw->phy_reset_disable) return E1000_SUCCESS; @@ -1362,8 +1338,6 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_autoneg"); - /* Perform some bounds checking on the hw->autoneg_advertised * parameter. If this variable is zero, then set it to the default. */ @@ -1432,7 +1406,6 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { s32 ret_val; - e_dbg("e1000_copper_link_postconfig"); if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) { e1000_config_collision_dist(hw); @@ -1473,8 +1446,6 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw) u16 i; u16 phy_data; - e_dbg("e1000_setup_copper_link"); - /* Check if it is a valid PHY and set PHY mode if necessary. */ ret_val = e1000_copper_link_preconfig(hw); if (ret_val) @@ -1554,8 +1525,6 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) u16 mii_autoneg_adv_reg; u16 mii_1000t_ctrl_reg; - e_dbg("e1000_phy_setup_autoneg"); - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); if (ret_val) @@ -1707,8 +1676,6 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) u16 phy_data; u16 i; - e_dbg("e1000_phy_force_speed_duplex"); - /* Turn off Flow control if we are forcing speed and duplex. */ hw->fc = E1000_FC_NONE; @@ -1939,8 +1906,6 @@ void e1000_config_collision_dist(struct e1000_hw *hw) { u32 tctl, coll_dist; - e_dbg("e1000_config_collision_dist"); - if (hw->mac_type < e1000_82543) coll_dist = E1000_COLLISION_DISTANCE_82542; else @@ -1970,8 +1935,6 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_config_mac_to_phy"); - /* 82544 or newer MAC, Auto Speed Detection takes care of * MAC speed/duplex configuration. */ @@ -2049,8 +2012,6 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw) { u32 ctrl; - e_dbg("e1000_force_mac_fc"); - /* Get the current configuration of the Device Control Register */ ctrl = er32(CTRL); @@ -2120,8 +2081,6 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) u16 speed; u16 duplex; - e_dbg("e1000_config_fc_after_link_up"); - /* Check for the case where we have fiber media and auto-neg failed * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. @@ -2337,8 +2296,6 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) u32 status; s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_check_for_serdes_link_generic"); - ctrl = er32(CTRL); status = er32(STATUS); rxcw = er32(RXCW); @@ -2449,8 +2406,6 @@ s32 e1000_check_for_link(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_check_for_link"); - ctrl = er32(CTRL); status = er32(STATUS); @@ -2632,8 +2587,6 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) s32 ret_val; u16 phy_data; - e_dbg("e1000_get_speed_and_duplex"); - if (hw->mac_type >= e1000_82543) { status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { @@ -2699,7 +2652,6 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) u16 i; u16 phy_data; - e_dbg("e1000_wait_autoneg"); e_dbg("Waiting for Auto-Neg to complete.\n"); /* We will wait for autoneg to complete or 4.5 seconds to expire. */ @@ -2866,8 +2818,6 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) u32 ret_val; unsigned long flags; - e_dbg("e1000_read_phy_reg"); - spin_lock_irqsave(&e1000_phy_lock, flags); if ((hw->phy_type == e1000_phy_igp) && @@ -2894,8 +2844,6 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u32 mdic = 0; const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; - e_dbg("e1000_read_phy_reg_ex"); - if (reg_addr > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; @@ -3008,8 +2956,6 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) u32 ret_val; unsigned long flags; - e_dbg("e1000_write_phy_reg"); - spin_lock_irqsave(&e1000_phy_lock, flags); if ((hw->phy_type == e1000_phy_igp) && @@ -3036,8 +2982,6 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u32 mdic = 0; const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; - e_dbg("e1000_write_phy_reg_ex"); - if (reg_addr > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; @@ -3129,8 +3073,6 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw) u32 ctrl, ctrl_ext; u32 led_ctrl; - e_dbg("e1000_phy_hw_reset"); - e_dbg("Resetting Phy...\n"); if (hw->mac_type > e1000_82543) { @@ -3189,8 +3131,6 @@ s32 e1000_phy_reset(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_phy_reset"); - switch (hw->phy_type) { case e1000_phy_igp: ret_val = e1000_phy_hw_reset(hw); @@ -3229,8 +3169,6 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) u16 phy_id_high, phy_id_low; bool match = false; - e_dbg("e1000_detect_gig_phy"); - if (hw->phy_id != 0) return E1000_SUCCESS; @@ -3301,7 +3239,6 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) static s32 e1000_phy_reset_dsp(struct e1000_hw *hw) { s32 ret_val; - e_dbg("e1000_phy_reset_dsp"); do { ret_val = e1000_write_phy_reg(hw, 29, 0x001d); @@ -3333,8 +3270,6 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, u16 phy_data, min_length, max_length, average; e1000_rev_polarity polarity; - e_dbg("e1000_phy_igp_get_info"); - /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ @@ -3414,8 +3349,6 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, u16 phy_data; e1000_rev_polarity polarity; - e_dbg("e1000_phy_m88_get_info"); - /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ @@ -3487,8 +3420,6 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) s32 ret_val; u16 phy_data; - e_dbg("e1000_phy_get_info"); - phy_info->cable_length = e1000_cable_length_undefined; phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined; phy_info->cable_polarity = e1000_rev_polarity_undefined; @@ -3527,8 +3458,6 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) s32 e1000_validate_mdi_setting(struct e1000_hw *hw) { - e_dbg("e1000_validate_mdi_settings"); - if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { e_dbg("Invalid MDI setting detected\n"); hw->mdix = 1; @@ -3551,8 +3480,6 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw) s32 ret_val = E1000_SUCCESS; u16 eeprom_size; - e_dbg("e1000_init_eeprom_params"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -3770,8 +3697,6 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw) struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 eecd, i = 0; - e_dbg("e1000_acquire_eeprom"); - eecd = er32(EECD); /* Request EEPROM Access */ @@ -3871,8 +3796,6 @@ static void e1000_release_eeprom(struct e1000_hw *hw) { u32 eecd; - e_dbg("e1000_release_eeprom"); - eecd = er32(EECD); if (hw->eeprom.type == e1000_eeprom_spi) { @@ -3920,8 +3843,6 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) u16 retry_count = 0; u8 spi_stat_reg; - e_dbg("e1000_spi_eeprom_ready"); - /* Read "Status Register" repeatedly until the LSB is cleared. The * EEPROM will signal that the command has been completed by clearing * bit 0 of the internal status register. If it's not cleared within @@ -3974,8 +3895,6 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 i = 0; - e_dbg("e1000_read_eeprom"); - if (hw->mac_type == e1000_ce4100) { GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words, data); @@ -4076,8 +3995,6 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) u16 checksum = 0; u16 i, eeprom_data; - e_dbg("e1000_validate_eeprom_checksum"); - for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { e_dbg("EEPROM Read Error\n"); @@ -4112,8 +4029,6 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) u16 checksum = 0; u16 i, eeprom_data; - e_dbg("e1000_update_eeprom_checksum"); - for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { e_dbg("EEPROM Read Error\n"); @@ -4154,8 +4069,6 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_eeprom_info *eeprom = &hw->eeprom; s32 status = 0; - e_dbg("e1000_write_eeprom"); - if (hw->mac_type == e1000_ce4100) { GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words, data); @@ -4205,8 +4118,6 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_eeprom_info *eeprom = &hw->eeprom; u16 widx = 0; - e_dbg("e1000_write_eeprom_spi"); - while (widx < words) { u8 write_opcode = EEPROM_WRITE_OPCODE_SPI; @@ -4274,8 +4185,6 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, u16 words_written = 0; u16 i = 0; - e_dbg("e1000_write_eeprom_microwire"); - /* Send the write enable command to the EEPROM (3-bit opcode plus * 6/8-bit dummy address beginning with 11). It's less work to include * the 11 of the dummy address as part of the opcode than it is to shift @@ -4354,8 +4263,6 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw) u16 offset; u16 eeprom_data, i; - e_dbg("e1000_read_mac_addr"); - for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { offset = i >> 1; if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { @@ -4394,8 +4301,6 @@ static void e1000_init_rx_addrs(struct e1000_hw *hw) u32 i; u32 rar_num; - e_dbg("e1000_init_rx_addrs"); - /* Setup the receive address. */ e_dbg("Programming MAC Address into RAR[0]\n"); @@ -4553,8 +4458,6 @@ static s32 e1000_id_led_init(struct e1000_hw *hw) u16 eeprom_data, i, temp; const u16 led_mask = 0x0F; - e_dbg("e1000_id_led_init"); - if (hw->mac_type < e1000_82540) { /* Nothing to do */ return E1000_SUCCESS; @@ -4626,8 +4529,6 @@ s32 e1000_setup_led(struct e1000_hw *hw) u32 ledctl; s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_setup_led"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4678,8 +4579,6 @@ s32 e1000_cleanup_led(struct e1000_hw *hw) { s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_cleanup_led"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4714,8 +4613,6 @@ s32 e1000_led_on(struct e1000_hw *hw) { u32 ctrl = er32(CTRL); - e_dbg("e1000_led_on"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4760,8 +4657,6 @@ s32 e1000_led_off(struct e1000_hw *hw) { u32 ctrl = er32(CTRL); - e_dbg("e1000_led_off"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4889,8 +4784,6 @@ static void e1000_clear_hw_cntrs(struct e1000_hw *hw) */ void e1000_reset_adaptive(struct e1000_hw *hw) { - e_dbg("e1000_reset_adaptive"); - if (hw->adaptive_ifs) { if (!hw->ifs_params_forced) { hw->current_ifs_val = 0; @@ -4917,8 +4810,6 @@ void e1000_reset_adaptive(struct e1000_hw *hw) */ void e1000_update_adaptive(struct e1000_hw *hw) { - e_dbg("e1000_update_adaptive"); - if (hw->adaptive_ifs) { if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) { if (hw->tx_packet_delta > MIN_NUM_XMITS) { @@ -5114,8 +5005,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 i, phy_data; u16 cable_length; - e_dbg("e1000_get_cable_length"); - *min_length = *max_length = 0; /* Use old method for Phy older than IGP */ @@ -5231,8 +5120,6 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, s32 ret_val; u16 phy_data; - e_dbg("e1000_check_polarity"); - if (hw->phy_type == e1000_phy_m88) { /* return the Polarity bit in the Status register. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, @@ -5299,8 +5186,6 @@ static s32 e1000_check_downshift(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_check_downshift"); - if (hw->phy_type == e1000_phy_igp) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); @@ -5411,8 +5296,6 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) s32 ret_val; u16 phy_data, phy_saved_data, speed, duplex, i; - e_dbg("e1000_config_dsp_after_link_change"); - if (hw->phy_type != e1000_phy_igp) return E1000_SUCCESS; @@ -5546,8 +5429,6 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw) s32 ret_val; u16 eeprom_data; - e_dbg("e1000_set_phy_mode"); - if ((hw->mac_type == e1000_82545_rev_3) && (hw->media_type == e1000_media_type_copper)) { ret_val = @@ -5594,7 +5475,6 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) { s32 ret_val; u16 phy_data; - e_dbg("e1000_set_d3_lplu_state"); if (hw->phy_type != e1000_phy_igp) return E1000_SUCCESS; @@ -5699,8 +5579,6 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw) u16 default_page = 0; u16 phy_data; - e_dbg("e1000_set_vco_speed"); - switch (hw->mac_type) { case e1000_82545_rev_3: case e1000_82546_rev_3: @@ -5872,7 +5750,6 @@ static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) */ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) { - e_dbg("e1000_get_auto_rd_done"); msleep(5); return E1000_SUCCESS; } @@ -5887,7 +5764,6 @@ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) */ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) { - e_dbg("e1000_get_phy_cfg_done"); msleep(10); return E1000_SUCCESS; } |