Merge branch 'linus' into x86/apic

Conflicts: arch/x86/mach-default/setup.c Semantic conflict resolution: arch/x86/kernel/setup.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
author: Ingo Molnar <mingo@elte.hu> 2009-02-22 22:05:19 +0300
committer: Ingo Molnar <mingo@elte.hu> 2009-02-22 22:05:19 +0300
commit: fc6fc7f1b1095b92d4834e69b385b91e412a7ce5 (patch)
tree: 2ad451d5dac4d460830536944cef1de93be36b2a /drivers
parent: ef1f87aa7ba6224bef1b750b3272ba281d8f43ed (diff)
parent: 770824bdc421ff58a64db608294323571c949f4c (diff)
download: linux-fc6fc7f1b1095b92d4834e69b385b91e412a7ce5.tar.xz
122 files changed, 1480 insertions, 588 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index a7799a99f2d9..8a851d0f4384 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -254,13 +254,6 @@ config ACPI_PCI_SLOT
 	  help you correlate PCI bus addresses with the physical geography
 	  of your slots. If you are unsure, say N.
 
-config ACPI_SYSTEM
-	bool
-	default y
-	help
-	  This driver will enable your system to shut down using ACPI, and
-	  dump your ACPI DSDT table using /proc/acpi/dsdt.
-
 config X86_PM_TIMER
 	bool "Power Management Timer Support" if EMBEDDED
 	depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 65d90c720b5a..b130ea0d0759 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -52,7 +52,7 @@ obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
 obj-$(CONFIG_ACPI_CONTAINER)	+= container.o
 obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
 obj-y				+= power.o
-obj-$(CONFIG_ACPI_SYSTEM)	+= system.o event.o
+obj-y				+= system.o event.o
 obj-$(CONFIG_ACPI_DEBUG)	+= debug.o
 obj-$(CONFIG_ACPI_NUMA)		+= numa.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 65132f920459..69cbc57c2d1c 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -138,6 +138,29 @@ static int acpi_battery_technology(struct acpi_battery *battery)
 
 static int acpi_battery_get_state(struct acpi_battery *battery);
 
+static int acpi_battery_is_charged(struct acpi_battery *battery)
+{
+	/* either charging or discharging */
+	if (battery->state != 0)
+		return 0;
+
+	/* battery not reporting charge */
+	if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN ||
+	    battery->capacity_now == 0)
+		return 0;
+
+	/* good batteries update full_charge as the batteries degrade */
+	if (battery->full_charge_capacity == battery->capacity_now)
+		return 1;
+
+	/* fallback to using design values for broken batteries */
+	if (battery->design_capacity == battery->capacity_now)
+		return 1;
+
+	/* we don't do any sort of metric based on percentages */
+	return 0;
+}
+
 static int acpi_battery_get_property(struct power_supply *psy,
 				     enum power_supply_property psp,
 				     union power_supply_propval *val)
@@ -155,7 +178,7 @@ static int acpi_battery_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 		else if (battery->state & 0x02)
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		else if (battery->state == 0)
+		else if (acpi_battery_is_charged(battery))
 			val->intval = POWER_SUPPLY_STATUS_FULL;
 		else
 			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5c2f5d343be6..2fe15060dcdc 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -120,6 +120,8 @@ static struct acpi_ec {
 	spinlock_t curr_lock;
 } *boot_ec, *first_ec;
 
+static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -259,6 +261,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
 		clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
 		acpi_disable_gpe(NULL, ec->gpe);
 	}
+	if (EC_FLAGS_MSI)
+		udelay(ACPI_EC_DELAY);
 	/* start transaction */
 	spin_lock_irqsave(&ec->curr_lock, tmp);
 	/* following two actions should be kept atomic */
@@ -967,6 +971,11 @@ int __init acpi_ec_ecdt_probe(void)
 	/*
 	 * Generate a boot ec context
 	 */
+	if (dmi_name_in_vendors("Micro-Star") ||
+	    dmi_name_in_vendors("Notebook")) {
+		pr_info(PREFIX "Enabling special treatment for EC from MSI.\n");
+		EC_FLAGS_MSI = 1;
+	}
 	status = acpi_get_table(ACPI_SIG_ECDT, 1,
 				(struct acpi_table_header **)&ecdt_ptr);
 	if (ACPI_SUCCESS(status)) {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0b299b0f8172..714cb046b594 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
 	else
 		iowrite32_rep(data_addr, buf, words);
 
+	/* Transfer trailing bytes, if any */
 	if (unlikely(slop)) {
-		__le32 pad;
+		unsigned char pad[4];
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - slop;
+
+		/*
+		 * Use io*_rep() accessors here as well to avoid pointlessly
+		 * swapping bytes to and fro on the big endian machines...
+		 */
 		if (rw == READ) {
-			pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
-			memcpy(buf + buflen - slop, &pad, slop);
+			if (slop < 3)
+				ioread16_rep(data_addr, pad, 1);
+			else
+				ioread32_rep(data_addr, pad, 1);
+			memcpy(buf, pad, slop);
 		} else {
-			memcpy(&pad, buf + buflen - slop, slop);
-			iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+			memcpy(pad, buf, slop);
+			if (slop < 3)
+				iowrite16_rep(data_addr, pad, 1);
+			else
+				iowrite32_rep(data_addr, pad, 1);
 		}
-		words++;
 	}
-	return words << 2;
+	return (buflen + 1) & ~1;
 }
 EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 79a6c9a0b721..ba556d3e6963 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -110,7 +110,8 @@ static const struct via_isa_bridge {
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
-	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+	{ "vt6415",	PCI_DEVICE_ID_VIA_6415,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
 	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev)
 #endif
 
 static const struct pci_device_id via[] = {
+	{ PCI_VDEVICE(VIA, 0x0415), },
 	{ PCI_VDEVICE(VIA, 0x0571), },
 	{ PCI_VDEVICE(VIA, 0x0581), },
 	{ PCI_VDEVICE(VIA, 0x1571), },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 444af0415ca1..55a8eed3f3a3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -421,19 +421,21 @@ static struct ata_port_operations nv_generic_ops = {
 	.hardreset		= ATA_OP_NULL,
 };
 
-/* OSDL bz3352 reports that nf2/3 controllers can't determine device
- * signature reliably.  Also, the following thread reports detection
- * failure on cold boot with the standard debouncing timing.
+/* nf2 is ripe with hardreset related problems.
+ *
+ * kernel bz#3352 reports nf2/3 controllers can't determine device
+ * signature reliably.  The following thread reports detection failure
+ * on cold boot with the standard debouncing timing.
  *
  * http://thread.gmane.org/gmane.linux.ide/34098
  *
- * Debounce with hotplug timing and request follow-up SRST.
+ * And bz#12176 reports that hardreset simply doesn't work on nf2.
+ * Give up on it and just don't do hardreset.
  */
 static struct ata_port_operations nv_nf2_ops = {
-	.inherits		= &nv_common_ops,
+	.inherits		= &nv_generic_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
-	.hardreset		= nv_noclassify_hardreset,
 };
 
 /* For initial probing after boot and hot plugging, hardreset mostly
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 0a5f055dffba..9f50f1b545dc 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -88,8 +88,6 @@ extern void driver_detach(struct device_driver *drv);
 extern int driver_probe_device(struct device_driver *drv, struct device *dev);
 
 extern void sysdev_shutdown(void);
-extern int sysdev_suspend(pm_message_t state);
-extern int sysdev_resume(void);
 
 extern char *make_class_name(const char *name, struct kobject *kobj);
 
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 315bed8d5e7f..135231239103 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -18,9 +18,11 @@
  */
 
 #include <linux/device.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kthread.h>
 #include <linux/wait.h>
+#include <linux/async.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -168,6 +170,21 @@ int driver_probe_done(void)
 }
 
 /**
+ * wait_for_device_probe
+ * Wait for device probing to be completed.
+ *
+ * Note: this function polls at 100 msec intervals.
+ */
+int wait_for_device_probe(void)
+{
+	/* wait for the known devices to complete their probing */
+	while (driver_probe_done() != 0)
+		msleep(100);
+	async_synchronize_full();
+	return 0;
+}
+
+/**
  * driver_probe_device - attempt to bind device & driver together
  * @drv: driver to bind a device to
  * @dev: device to try to bind to the driver
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 670c9d6c1407..2d14f4ae6c01 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -333,7 +333,6 @@ static void dpm_power_up(pm_message_t state)
  */
 void device_power_up(pm_message_t state)
 {
-	sysdev_resume();
 	dpm_power_up(state);
 }
 EXPORT_SYMBOL_GPL(device_power_up);
@@ -577,8 +576,6 @@ int device_power_down(pm_message_t state)
 		}
 		dev->power.status = DPM_OFF_IRQ;
 	}
-	if (!error)
-		error = sysdev_suspend(state);
 	if (error)
 		dpm_power_up(resume_event(state));
 	return error;
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index c237527b1aa5..5e41e6dd657b 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -18,6 +18,7 @@
 enum {
 	AOECMD_ATA,
 	AOECMD_CFG,
+	AOECMD_VEND_MIN = 0xf0,
 
 	AOEFL_RSP = (1<<3),
 	AOEFL_ERR = (1<<2),
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 30de5b1c647e..c6099ba9a4b8 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
 		aoecmd_cfg_rsp(skb);
 		break;
 	default:
+		if (h->cmd >= AOECMD_VEND_MIN)
+			break;	/* don't complain about vendor commands */
 		printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
 	}
 exit:
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 69e1df7dfa14..4234c11c1e4c 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1730,7 +1730,7 @@ static int __init fd_test_drive_present( int drive )
 
 	timeout = jiffies + 2*HZ+HZ/2;
 	while (time_before(jiffies, timeout))
-		if (!(mfp.par_dt_reg & 0x20))
+		if (!(st_mfp.par_dt_reg & 0x20))
 			break;
 
 	status = FDC_READ( FDCREG_STATUS );
@@ -1747,7 +1747,7 @@ static int __init fd_test_drive_present( int drive )
 		/* dummy seek command to make WP bit accessible */
 		FDC_WRITE( FDCREG_DATA, 0 );
 		FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
-		while( mfp.par_dt_reg & 0x20 )
+		while( st_mfp.par_dt_reg & 0x20 )
 			;
 		status = FDC_READ( FDCREG_STATUS );
 	}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 01e69383d9c0..d2cb67b61176 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3390,6 +3390,203 @@ static void free_hba(int i)
 	kfree(p);
 }
 
+/* Send a message CDB to the firmware. */
+static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+{
+	typedef struct {
+		CommandListHeader_struct CommandHeader;
+		RequestBlock_struct Request;
+		ErrDescriptor_struct ErrorDescriptor;
+	} Command;
+	static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+	Command *cmd;
+	dma_addr_t paddr64;
+	uint32_t paddr32, tag;
+	void __iomem *vaddr;
+	int i, err;
+
+	vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+	if (vaddr == NULL)
+		return -ENOMEM;
+
+	/* The Inbound Post Queue only accepts 32-bit physical addresses for the
+	   CCISS commands, so they must be allocated from the lower 4GiB of
+	   memory. */
+	err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	if (err) {
+		iounmap(vaddr);
+		return -ENOMEM;
+	}
+
+	cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+	if (cmd == NULL) {
+		iounmap(vaddr);
+		return -ENOMEM;
+	}
+
+	/* This must fit, because of the 32-bit consistent DMA mask.  Also,
+	   although there's no guarantee, we assume that the address is at
+	   least 4-byte aligned (most likely, it's page-aligned). */
+	paddr32 = paddr64;
+
+	cmd->CommandHeader.ReplyQueue = 0;
+	cmd->CommandHeader.SGList = 0;
+	cmd->CommandHeader.SGTotal = 0;
+	cmd->CommandHeader.Tag.lower = paddr32;
+	cmd->CommandHeader.Tag.upper = 0;
+	memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+	cmd->Request.CDBLen = 16;
+	cmd->Request.Type.Type = TYPE_MSG;
+	cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+	cmd->Request.Type.Direction = XFER_NONE;
+	cmd->Request.Timeout = 0; /* Don't time out */
+	cmd->Request.CDB[0] = opcode;
+	cmd->Request.CDB[1] = type;
+	memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+
+	cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+	cmd->ErrorDescriptor.Addr.upper = 0;
+	cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+
+	writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+	for (i = 0; i < 10; i++) {
+		tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+		if ((tag & ~3) == paddr32)
+			break;
+		schedule_timeout_uninterruptible(HZ);
+	}
+
+	iounmap(vaddr);
+
+	/* we leak the DMA buffer here ... no choice since the controller could
+	   still complete the command. */
+	if (i == 10) {
+		printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+			opcode, type);
+		return -ETIMEDOUT;
+	}
+
+	pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+	if (tag & 2) {
+		printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+			opcode, type);
+		return -EIO;
+	}
+
+	printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+		opcode, type);
+	return 0;
+}
+
+#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+#define cciss_noop(p) cciss_message(p, 3, 0)
+
+static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE		(1 << 15)
+
+	int pos;
+	u16 control = 0;
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+	if (pos) {
+		pci_read_config_word(pdev, msi_control_reg(pos), &control);
+		if (control & PCI_MSI_FLAGS_ENABLE) {
+			printk(KERN_INFO "cciss: resetting MSI\n");
+			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+		}
+	}
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+	if (pos) {
+		pci_read_config_word(pdev, msi_control_reg(pos), &control);
+		if (control & PCI_MSIX_FLAGS_ENABLE) {
+			printk(KERN_INFO "cciss: resetting MSI-X\n");
+			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+		}
+	}
+
+	return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states. */
+static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+{
+	u16 pmcsr, saved_config_space[32];
+	int i, pos;
+
+	printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+
+	/* This is very nearly the same thing as
+
+	   pci_save_state(pci_dev);
+	   pci_set_power_state(pci_dev, PCI_D3hot);
+	   pci_set_power_state(pci_dev, PCI_D0);
+	   pci_restore_state(pci_dev);
+
+	   but we can't use these nice canned kernel routines on
+	   kexec, because they also check the MSI/MSI-X state in PCI
+	   configuration space and do the wrong thing when it is
+	   set/cleared.  Also, the pci_save/restore_state functions
+	   violate the ordering requirements for restoring the
+	   configuration space from the CCISS document (see the
+	   comment below).  So we roll our own .... */
+
+	for (i = 0; i < 32; i++)
+		pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	if (pos == 0) {
+		printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+		return -ENODEV;
+	}
+
+	/* Quoting from the Open CISS Specification: "The Power
+	 * Management Control/Status Register (CSR) controls the power
+	 * state of the device.  The normal operating state is D0,
+	 * CSR=00h.  The software off state is D3, CSR=03h.  To reset
+	 * the controller, place the interface device in D3 then to
+	 * D0, this causes a secondary PCI reset which will reset the
+	 * controller." */
+
+	/* enter the D3hot power management state */
+	pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+	pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+	pmcsr |= PCI_D3hot;
+	pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+	schedule_timeout_uninterruptible(HZ >> 1);
+
+	/* enter the D0 power management state */
+	pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+	pmcsr |= PCI_D0;
+	pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+	schedule_timeout_uninterruptible(HZ >> 1);
+
+	/* Restore the PCI configuration space.  The Open CISS
+	 * Specification says, "Restore the PCI Configuration
+	 * Registers, offsets 00h through 60h. It is important to
+	 * restore the command register, 16-bits at offset 04h,
+	 * last. Do not restore the configuration status register,
+	 * 16-bits at offset 06h."  Note that the offset is 2*i. */
+	for (i = 0; i < 32; i++) {
+		if (i == 2 || i == 3)
+			continue;
+		pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+	}
+	wmb();
+	pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+	return 0;
+}
+
 /*
  *  This is it.  Find all the controllers and register them.  I really hate
  *  stealing all these major device numbers.
@@ -3404,6 +3601,24 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	int dac, return_code;
 	InquiryData_struct *inq_buff = NULL;
 
+	if (reset_devices) {
+		/* Reset the controller with a PCI power-cycle */
+		if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+			return -ENODEV;
+
+		/* Some devices (notably the HP Smart Array 5i Controller)
+		   need a little pause here */
+		schedule_timeout_uninterruptible(30*HZ);
+
+		/* Now try to get the controller to respond to a no-op */
+		for (i=0; i<12; i++) {
+			if (cciss_noop(pdev) == 0)
+				break;
+			else
+				printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+		}
+	}
+
 	i = alloc_cciss_hba();
 	if (i < 0)
 		return -1;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf29cc4e6ab7..83d8ed39433d 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -558,6 +558,8 @@ static void process_fd_request(void);
 static void recalibrate_floppy(void);
 static void floppy_shutdown(unsigned long);
 
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
 static int floppy_grab_irq_and_dma(void);
 static void floppy_release_irq_and_dma(void);
 
@@ -4274,8 +4276,7 @@ static int __init floppy_init(void)
 		FDCS->rawcmd = 2;
 		if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
-			release_region(FDCS->address + 2, 4);
-			release_region(FDCS->address + 7, 1);
+			floppy_release_regions(fdc);
 			FDCS->address = -1;
 			FDCS->version = FDC_NONE;
 			continue;
@@ -4284,8 +4285,7 @@ static int __init floppy_init(void)
 		FDCS->version = get_fdc_version();
 		if (FDCS->version == FDC_NONE) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
-			release_region(FDCS->address + 2, 4);
-			release_region(FDCS->address + 7, 1);
+			floppy_release_regions(fdc);
 			FDCS->address = -1;
 			continue;
 		}
@@ -4358,6 +4358,47 @@ out_put_disk:
 
 static DEFINE_SPINLOCK(floppy_usage_lock);
 
+static const struct io_region {
+	int offset;
+	int size;
+} io_regions[] = {
+	{ 2, 1 },
+	/* address + 3 is sometimes reserved by pnp bios for motherboard */
+	{ 4, 2 },
+	/* address + 6 is reserved, and may be taken by IDE.
+	 * Unfortunately, Adaptec doesn't know this :-(, */
+	{ 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+	while (p != io_regions) {
+		p--;
+		release_region(FDCS->address + p->offset, p->size);
+	}
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+	const struct io_region *p;
+
+	for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+		if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+			DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+			floppy_release_allocated_regions(fdc, p);
+			return -EBUSY;
+		}
+	}
+	return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+	floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
 static int floppy_grab_irq_and_dma(void)
 {
 	unsigned long flags;
@@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void)
 
 	for (fdc = 0; fdc < N_FDC; fdc++) {
 		if (FDCS->address != -1) {
-			if (!request_region(FDCS->address + 2, 4, "floppy")) {
-				DPRINT("Floppy io-port 0x%04lx in use\n",
-				       FDCS->address + 2);
-				goto cleanup1;
-			}
-			if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
-				DPRINT("Floppy io-port 0x%04lx in use\n",
-				       FDCS->address + 7);
-				goto cleanup2;
-			}
-			/* address + 6 is reserved, and may be taken by IDE.
-			 * Unfortunately, Adaptec doesn't know this :-(, */
+			if (floppy_request_regions(fdc))
+				goto cleanup;
 		}
 	}
 	for (fdc = 0; fdc < N_FDC; fdc++) {
@@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void)
 	fdc = 0;
 	irqdma_allocated = 1;
 	return 0;
-cleanup2:
-	release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
 	fd_free_irq();
 	fd_free_dma();
-	while (--fdc >= 0) {
-		release_region(FDCS->address + 2, 4);
-		release_region(FDCS->address + 7, 1);
-	}
+	while (--fdc >= 0)
+		floppy_release_regions(fdc);
 	spin_lock_irqsave(&floppy_usage_lock, flags);
 	usage_count--;
 	spin_unlock_irqrestore(&floppy_usage_lock, flags);
@@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void)
 #endif
 	old_fdc = fdc;
 	for (fdc = 0; fdc < N_FDC; fdc++)
-		if (FDCS->address != -1) {
-			release_region(FDCS->address + 2, 4);
-			release_region(FDCS->address + 7, 1);
-		}
+		if (FDCS->address != -1)
+			floppy_release_regions(fdc);
 	fdc = old_fdc;
 }
 
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 9dfa27163001..c397b3ddba9b 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len)
 
 	for (k = 0; k < len; k++) {
 		char c = *buf++;
-		if (c != ' ' || c != l)
+		if (c != ' ' && c != l)
 			l = *targ++ = c;
 	}
 	if (l == ' ')
diff --git a/drivers/char/scc.h b/drivers/char/scc.h
index 93998f5baff5..341b1142bea8 100644
--- a/drivers/char/scc.h
+++ b/drivers/char/scc.h
@@ -387,7 +387,7 @@ struct scc_port {
 /* The SCC needs 3.5 PCLK cycles recovery time between to register
  * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 *
  * 125 ns = 437.5 ns. This is too short for udelay().
- * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be
+ * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be
  * quite right
  */
 
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index f146e90404fa..518f2a25d91e 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1746,9 +1746,10 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
 		sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
 		break;
 	case SXIO_DO_RAMTEST:
-		if (sx_initialized)	/* Already initialized: better not ramtest the board.  */
+		if (sx_initialized) {	/* Already initialized: better not ramtest the board.  */
 			rc = -EPERM;
 			break;
+		}
 		if (IS_SX_BOARD(board)) {
 			rc = do_memtest(board, 0, 0x7000);
 			if (!rc)
@@ -1788,7 +1789,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
 						nbytes - i : SX_CHUNK_SIZE)) {
 					kfree(tmp);
 					rc = -EFAULT;
-					break;
+					goto out;
 				}
 				memcpy_toio(board->base2 + offset + i, tmp,
 						(i + SX_CHUNK_SIZE > nbytes) ?
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index a58993011edb..280a9d263eb3 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v
 				       dma_chan_name(chan), err);
 			else
 				break;
+			chan->private = NULL;
 			chan = NULL;
 		}
 	}
@@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan)
 	WARN_ONCE(chan->client_count != 1,
 		  "chan reference count %d != 1\n", chan->client_count);
 	dma_chan_put(chan);
+	chan->private = NULL;
 	mutex_unlock(&dma_list_mutex);
 }
 EXPORT_SYMBOL_GPL(dma_release_channel);
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 6b702cc46b3d..a97c07eef7ec 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned long flags)
 {
 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
-	struct dw_dma_slave	*dws = dwc->dws;
+	struct dw_dma_slave	*dws = chan->private;
 	struct dw_desc		*prev;
 	struct dw_desc		*first;
 	u32			ctllo;
@@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)
 	cfghi = DWC_CFGH_FIFO_MODE;
 	cfglo = 0;
 
-	dws = dwc->dws;
+	dws = chan->private;
 	if (dws) {
 		/*
 		 * We need controller-specific data to set up slave
@@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
 	spin_lock_bh(&dwc->lock);
 	list_splice_init(&dwc->free_list, &list);
 	dwc->descs_allocated = 0;
-	dwc->dws = NULL;
 
 	/* Disable interrupts */
 	channel_clear_bit(dw, MASK.XFER, dwc->mask);
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 00fdd187bb0c..b252b202c5cf 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -139,8 +139,6 @@ struct dw_dma_chan {
 	struct list_head	queue;
 	struct list_head	free_list;
 
-	struct dw_dma_slave	*dws;
-
 	unsigned int		descs_allocated;
 };
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 261b9aa3f248..05aa2d406ac6 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -1,7 +1,7 @@
 /*
  * linux/drivers/firmware/memmap.c
  *  Copyright (C) 2008 SUSE LINUX Products GmbH
- *  by Bernhard Walle <bwalle@suse.de>
+ *  by Bernhard Walle <bernhard.walle@gmx.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License v2.0 as published by
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4be3acbaaf9a..3a22eb9be378 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -80,18 +80,17 @@ config DRM_I915
 	  XFree86 4.4 and above. If unsure, build this and i830 as modules and
 	  the X server will load the correct one.
 
-endchoice
-
 config DRM_I915_KMS
 	bool "Enable modesetting on intel by default"
 	depends on DRM_I915
 	help
-	Choose this option if you want kernel modesetting enabled by default,
-	and you have a new enough userspace to support this. Running old
-	userspaces with this enabled will cause pain.  Note that this causes
-	the driver to bind to PCI devices, which precludes loading things
-	like intelfb.
+	  Choose this option if you want kernel modesetting enabled by default,
+	  and you have a new enough userspace to support this. Running old
+	  userspaces with this enabled will cause pain.  Note that this causes
+	  the driver to bind to PCI devices, which precludes loading things
+	  like intelfb.
 
+endchoice
 
 config DRM_MGA
 	tristate "Matrox g200/g400"
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index bfce0992fefb..94a768871734 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1741,9 +1741,8 @@ out:
  * RETURNS:
  * Zero on success, errno on failure.
  */
-void drm_fb_release(struct file *filp)
+void drm_fb_release(struct drm_file *priv)
 {
-	struct drm_file *priv = filp->private_data;
 	struct drm_device *dev = priv->minor->dev;
 	struct drm_framebuffer *fb, *tfb;
 
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 964c5eb1fada..733028b4d45e 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -512,8 +512,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	if (drm_mode_equal(&saved_mode, &crtc->mode)) {
 		if (saved_x != crtc->x || saved_y != crtc->y ||
 		    depth_changed || bpp_changed) {
-			crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
-						  old_fb);
+			ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
+							 old_fb);
 			goto done;
 		}
 	}
@@ -552,7 +552,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	/* Set up the DPLL and any encoders state that needs to adjust or depend
 	 * on the DPLL.
 	 */
-	crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+	ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+	if (!ret)
+	    goto done;
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 
@@ -752,6 +754,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 			if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
 						      set->x, set->y,
 						      old_fb)) {
+				DRM_ERROR("failed to set mode on crtc %p\n",
+					  set->crtc);
 				ret = -EINVAL;
 				goto fail_set_mode;
 			}
@@ -765,7 +769,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		old_fb = set->crtc->fb;
 		if (set->crtc->fb != set->fb)
 			set->crtc->fb = set->fb;
-		crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb);
+		ret = crtc_funcs->mode_set_base(set->crtc,
+						set->x, set->y, old_fb);
+		if (ret != 0)
+		    goto fail_set_mode;
 	}
 
 	kfree(save_encoders);
@@ -775,8 +782,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 fail_set_mode:
 	set->crtc->enabled = save_enabled;
 	count = 0;
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (!connector->encoder)
+			continue;
+
 		connector->encoder->crtc = save_crtcs[count++];
+	}
 fail_no_encoder:
 	kfree(save_crtcs);
 	count = 0;
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index b06a53715853..6c020fe5431c 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -457,6 +457,9 @@ int drm_release(struct inode *inode, struct file *filp)
 	if (dev->driver->driver_features & DRIVER_GEM)
 		drm_gem_release(dev, file_priv);
 
+	if (dev->driver->driver_features & DRIVER_MODESET)
+		drm_fb_release(file_priv);
+
 	mutex_lock(&dev->ctxlist_mutex);
 	if (!list_empty(&dev->ctxlist)) {
 		struct drm_ctx_list *pos, *n;
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 6915fb82d0b0..88d3368ffddd 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -104,8 +104,8 @@ drm_gem_init(struct drm_device *dev)
 
 	if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START,
 			DRM_FILE_PAGE_OFFSET_SIZE)) {
-		drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
 		drm_ht_remove(&mm->offset_hash);
+		drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
 		return -ENOMEM;
 	}
 
@@ -295,35 +295,37 @@ drm_gem_flink_ioctl(struct drm_device *dev, void *data,
 		return -EBADF;
 
 again:
-	if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0)
-		return -ENOMEM;
+	if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) {
+		ret = -ENOMEM;
+		goto err;
+	}
 
 	spin_lock(&dev->object_name_lock);
-	if (obj->name) {
-		args->name = obj->name;
+	if (!obj->name) {
+		ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
+					&obj->name);
+		args->name = (uint64_t) obj->name;
 		spin_unlock(&dev->object_name_lock);
-		return 0;
-	}
-	ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
-				 &obj->name);
-	spin_unlock(&dev->object_name_lock);
-	if (ret == -EAGAIN)
-		goto again;
 
-	if (ret != 0) {
-		mutex_lock(&dev->struct_mutex);
-		drm_gem_object_unreference(obj);
-		mutex_unlock(&dev->struct_mutex);
-		return ret;
-	}
+		if (ret == -EAGAIN)
+			goto again;
 
-	/*
-	 * Leave the reference from the lookup around as the
-	 * name table now holds one
-	 */
-	args->name = (uint64_t) obj->name;
+		if (ret != 0)
+			goto err;
 
-	return 0;
+		/* Allocate a reference for the name table.  */
+		drm_gem_object_reference(obj);
+	} else {
+		args->name = (uint64_t) obj->name;
+		spin_unlock(&dev->object_name_lock);
+		ret = 0;
+	}
+
+err:
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
 }
 
 /**
@@ -448,6 +450,7 @@ drm_gem_object_handle_free(struct kref *kref)
 	spin_lock(&dev->object_name_lock);
 	if (obj->name) {
 		idr_remove(&dev->object_name_idr, obj->name);
+		obj->name = 0;
 		spin_unlock(&dev->object_name_lock);
 		/*
 		 * The object name held a reference to this object, drop
@@ -460,6 +463,26 @@ drm_gem_object_handle_free(struct kref *kref)
 }
 EXPORT_SYMBOL(drm_gem_object_handle_free);
 
+void drm_gem_vm_open(struct vm_area_struct *vma)
+{
+	struct drm_gem_object *obj = vma->vm_private_data;
+
+	drm_gem_object_reference(obj);
+}
+EXPORT_SYMBOL(drm_gem_vm_open);
+
+void drm_gem_vm_close(struct vm_area_struct *vma)
+{
+	struct drm_gem_object *obj = vma->vm_private_data;
+	struct drm_device *dev = obj->dev;
+
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+}
+EXPORT_SYMBOL(drm_gem_vm_close);
+
+
 /**
  * drm_gem_mmap - memory map routine for GEM objects
  * @filp: DRM file pointer
@@ -521,6 +544,14 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma)
 #endif
 	vma->vm_page_prot = __pgprot(prot);
 
+	/* Take a ref for this mapping of the object, so that the fault
+	 * handler can dereference the mmap offset's pointer to the object.
+	 * This reference is cleaned up by the corresponding vm_close
+	 * (which should happen whether the vma was created by this call, or
+	 * by a vm_open due to mremap or partial unmap or whatever).
+	 */
+	drm_gem_object_reference(obj);
+
 	vma->vm_file = filp;	/* Needed for drm_vm_open() */
 	drm_vm_open_locked(vma);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index aac12ee31a46..a31cbdbc3c54 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -94,6 +94,8 @@ static int i915_resume(struct drm_device *dev)
 
 static struct vm_operations_struct i915_gem_vm_ops = {
 	.fault = i915_gem_fault,
+	.open = drm_gem_vm_open,
+	.close = drm_gem_vm_close,
 };
 
 static struct drm_driver driver = {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7325363164f8..135a08f615cd 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -184,6 +184,8 @@ typedef struct drm_i915_private {
 	unsigned int lvds_dither:1;
 	unsigned int lvds_vbt:1;
 	unsigned int int_crt_support:1;
+	unsigned int lvds_use_ssc:1;
+	int lvds_ssc_freq;
 
 	struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 818576654092..ac534c9a2f81 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -607,8 +607,6 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	case -EAGAIN:
 		return VM_FAULT_OOM;
 	case -EFAULT:
-	case -EBUSY:
-		DRM_ERROR("can't insert pfn??  fault or busy...\n");
 		return VM_FAULT_SIGBUS;
 	default:
 		return VM_FAULT_NOPAGE;
@@ -684,6 +682,30 @@ out_free_list:
 	return ret;
 }
 
+static void
+i915_gem_free_mmap_offset(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	struct drm_gem_mm *mm = dev->mm_private;
+	struct drm_map_list *list;
+
+	list = &obj->map_list;
+	drm_ht_remove_item(&mm->offset_hash, &list->hash);
+
+	if (list->file_offset_node) {
+		drm_mm_put_block(list->file_offset_node);
+		list->file_offset_node = NULL;
+	}
+
+	if (list->map) {
+		drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER);
+		list->map = NULL;
+	}
+
+	obj_priv->mmap_offset = 0;
+}
+
 /**
  * i915_gem_get_gtt_alignment - return required GTT alignment for an object
  * @obj: object to check
@@ -758,8 +780,11 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
 
 	if (!obj_priv->mmap_offset) {
 		ret = i915_gem_create_mmap_offset(obj);
-		if (ret)
+		if (ret) {
+			drm_gem_object_unreference(obj);
+			mutex_unlock(&dev->struct_mutex);
 			return ret;
+		}
 	}
 
 	args->offset = obj_priv->mmap_offset;
@@ -2251,6 +2276,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 				  (int) reloc.offset,
 				  reloc.read_domains,
 				  reloc.write_domain);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
 			return -EINVAL;
 		}
 
@@ -2480,13 +2507,15 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	if (dev_priv->mm.wedged) {
 		DRM_ERROR("Execbuf while wedged\n");
 		mutex_unlock(&dev->struct_mutex);
-		return -EIO;
+		ret = -EIO;
+		goto pre_mutex_err;
 	}
 
 	if (dev_priv->mm.suspended) {
 		DRM_ERROR("Execbuf while VT-switched.\n");
 		mutex_unlock(&dev->struct_mutex);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto pre_mutex_err;
 	}
 
 	/* Look up object handles */
@@ -2632,15 +2661,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
-	/* Copy the new buffer offsets back to the user's exec list. */
-	ret = copy_to_user((struct drm_i915_relocation_entry __user *)
-			   (uintptr_t) args->buffers_ptr,
-			   exec_list,
-			   sizeof(*exec_list) * args->buffer_count);
-	if (ret)
-		DRM_ERROR("failed to copy %d exec entries "
-			  "back to user (%d)\n",
-			   args->buffer_count, ret);
 err:
 	for (i = 0; i < pinned; i++)
 		i915_gem_object_unpin(object_list[i]);
@@ -2650,6 +2670,18 @@ err:
 
 	mutex_unlock(&dev->struct_mutex);
 
+	if (!ret) {
+		/* Copy the new buffer offsets back to the user's exec list. */
+		ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+				   (uintptr_t) args->buffers_ptr,
+				   exec_list,
+				   sizeof(*exec_list) * args->buffer_count);
+		if (ret)
+			DRM_ERROR("failed to copy %d exec entries "
+				  "back to user (%d)\n",
+				  args->buffer_count, ret);
+	}
+
 pre_mutex_err:
 	drm_free(object_list, sizeof(*object_list) * args->buffer_count,
 		 DRM_MEM_DRIVER);
@@ -2753,6 +2785,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data,
 	if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
 		DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
 			  args->handle);
+		drm_gem_object_unreference(obj);
 		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
@@ -2885,9 +2918,6 @@ int i915_gem_init_object(struct drm_gem_object *obj)
 void i915_gem_free_object(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
-	struct drm_gem_mm *mm = dev->mm_private;
-	struct drm_map_list *list;
-	struct drm_map *map;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 
 	while (obj_priv->pin_count > 0)
@@ -2898,19 +2928,7 @@ void i915_gem_free_object(struct drm_gem_object *obj)
 
 	i915_gem_object_unbind(obj);
 
-	list = &obj->map_list;
-	drm_ht_remove_item(&mm->offset_hash, &list->hash);
-
-	if (list->file_offset_node) {
-		drm_mm_put_block(list->file_offset_node);
-		list->file_offset_node = NULL;
-	}
-
-	map = list->map;
-	if (map) {
-		drm_free(map, sizeof(*map), DRM_MEM_DRIVER);
-		list->map = NULL;
-	}
+	i915_gem_free_mmap_offset(obj);
 
 	drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
 	drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
@@ -3095,6 +3113,7 @@ i915_gem_init_hws(struct drm_device *dev)
 	if (dev_priv->hw_status_page == NULL) {
 		DRM_ERROR("Failed to map status page.\n");
 		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+		i915_gem_object_unpin(obj);
 		drm_gem_object_unreference(obj);
 		return -EINVAL;
 	}
@@ -3107,6 +3126,27 @@ i915_gem_init_hws(struct drm_device *dev)
 	return 0;
 }
 
+static void
+i915_gem_cleanup_hws(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj = dev_priv->hws_obj;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	if (dev_priv->hws_obj == NULL)
+		return;
+
+	kunmap(obj_priv->page_list[0]);
+	i915_gem_object_unpin(obj);
+	drm_gem_object_unreference(obj);
+	dev_priv->hws_obj = NULL;
+	memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+	dev_priv->hw_status_page = NULL;
+
+	/* Write high address into HWS_PGA when disabling. */
+	I915_WRITE(HWS_PGA, 0x1ffff000);
+}
+
 int
 i915_gem_init_ringbuffer(struct drm_device *dev)
 {
@@ -3124,6 +3164,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
 	obj = drm_gem_object_alloc(dev, 128 * 1024);
 	if (obj == NULL) {
 		DRM_ERROR("Failed to allocate ringbuffer\n");
+		i915_gem_cleanup_hws(dev);
 		return -ENOMEM;
 	}
 	obj_priv = obj->driver_private;
@@ -3131,6 +3172,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
 	ret = i915_gem_object_pin(obj, 4096);
 	if (ret != 0) {
 		drm_gem_object_unreference(obj);
+		i915_gem_cleanup_hws(dev);
 		return ret;
 	}
 
@@ -3148,7 +3190,9 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
 	if (ring->map.handle == NULL) {
 		DRM_ERROR("Failed to map ringbuffer.\n");
 		memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+		i915_gem_object_unpin(obj);
 		drm_gem_object_unreference(obj);
+		i915_gem_cleanup_hws(dev);
 		return -EINVAL;
 	}
 	ring->ring_obj = obj;
@@ -3228,20 +3272,7 @@ i915_gem_cleanup_ringbuffer(struct drm_device *dev)
 	dev_priv->ring.ring_obj = NULL;
 	memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
 
-	if (dev_priv->hws_obj != NULL) {
-		struct drm_gem_object *obj = dev_priv->hws_obj;
-		struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
-		kunmap(obj_priv->page_list[0]);
-		i915_gem_object_unpin(obj);
-		drm_gem_object_unreference(obj);
-		dev_priv->hws_obj = NULL;
-		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
-		dev_priv->hw_status_page = NULL;
-
-		/* Write high address into HWS_PGA when disabling. */
-		I915_WRITE(HWS_PGA, 0x1ffff000);
-	}
+	i915_gem_cleanup_hws(dev);
 }
 
 int
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index fa1685cba840..7fb4191ef934 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -299,9 +299,8 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 	}
 	obj_priv->stride = args->stride;
 
-	mutex_unlock(&dev->struct_mutex);
-
 	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
 }
@@ -340,9 +339,8 @@ i915_gem_get_tiling(struct drm_device *dev, void *data,
 		DRM_ERROR("unknown tiling mode\n");
 	}
 
-	mutex_unlock(&dev->struct_mutex);
-
 	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 4ca82a025525..65be30dccc77 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -135,6 +135,14 @@ parse_general_features(struct drm_i915_private *dev_priv,
 	if (general) {
 		dev_priv->int_tv_support = general->int_tv_support;
 		dev_priv->int_crt_support = general->int_crt_support;
+		dev_priv->lvds_use_ssc = general->enable_ssc;
+
+		if (dev_priv->lvds_use_ssc) {
+		  if (IS_I855(dev_priv->dev))
+		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
+		  else
+		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+		}
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bbdd72909a11..4d2baf7b00be 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -90,12 +90,12 @@ typedef struct {
 #define I9XX_DOT_MAX		 400000
 #define I9XX_VCO_MIN		1400000
 #define I9XX_VCO_MAX		2800000
-#define I9XX_N_MIN		      3
-#define I9XX_N_MAX		      8
+#define I9XX_N_MIN		      1
+#define I9XX_N_MAX		      6
 #define I9XX_M_MIN		     70
 #define I9XX_M_MAX		    120
 #define I9XX_M1_MIN		     10
-#define I9XX_M1_MAX		     20
+#define I9XX_M1_MAX		     22
 #define I9XX_M2_MIN		      5
 #define I9XX_M2_MAX		      9
 #define I9XX_P_SDVO_DAC_MIN	      5
@@ -189,9 +189,7 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
 	return limit;
 }
 
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-
-static void i8xx_clock(int refclk, intel_clock_t *clock)
+static void intel_clock(int refclk, intel_clock_t *clock)
 {
 	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
 	clock->p = clock->p1 * clock->p2;
@@ -199,25 +197,6 @@ static void i8xx_clock(int refclk, intel_clock_t *clock)
 	clock->dot = clock->vco / clock->p;
 }
 
-/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
-
-static void i9xx_clock(int refclk, intel_clock_t *clock)
-{
-	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
-	clock->p = clock->p1 * clock->p2;
-	clock->vco = refclk * clock->m / (clock->n + 2);
-	clock->dot = clock->vco / clock->p;
-}
-
-static void intel_clock(struct drm_device *dev, int refclk,
-			intel_clock_t *clock)
-{
-	if (IS_I9XX(dev))
-		i9xx_clock (refclk, clock);
-	else
-		i8xx_clock (refclk, clock);
-}
-
 /**
  * Returns whether any output on the specified pipe is of the specified type
  */
@@ -238,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
     return false;
 }
 
-#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
+#define INTELPllInvalid(s)   do { DRM_DEBUG(s); return false; } while (0)
 /**
  * Returns whether the given set of divisors are valid for a given refclk with
  * the given connectors.
@@ -318,7 +297,7 @@ static bool intel_find_best_PLL(struct drm_crtc *crtc, int target,
 				     clock.p1 <= limit->p1.max; clock.p1++) {
 					int this_err;
 
-					intel_clock(dev, refclk, &clock);
+					intel_clock(refclk, &clock);
 
 					if (!intel_PLL_is_valid(crtc, &clock))
 						continue;
@@ -343,7 +322,7 @@ intel_wait_for_vblank(struct drm_device *dev)
 	udelay(20000);
 }
 
-static void
+static int
 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		    struct drm_framebuffer *old_fb)
 {
@@ -361,11 +340,21 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
 	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
 	u32 dspcntr, alignment;
+	int ret;
 
 	/* no fb bound */
 	if (!crtc->fb) {
 		DRM_DEBUG("No FB bound\n");
-		return;
+		return 0;
+	}
+
+	switch (pipe) {
+	case 0:
+	case 1:
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+		return -EINVAL;
 	}
 
 	intel_fb = to_intel_framebuffer(crtc->fb);
@@ -377,28 +366,30 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		alignment = 64 * 1024;
 		break;
 	case I915_TILING_X:
-		if (IS_I9XX(dev))
-			alignment = 1024 * 1024;
-		else
-			alignment = 512 * 1024;
+		/* pin() will align the object as required by fence */
+		alignment = 0;
 		break;
 	case I915_TILING_Y:
 		/* FIXME: Is this true? */
 		DRM_ERROR("Y tiled not allowed for scan out buffers\n");
-		return;
+		return -EINVAL;
 	default:
 		BUG();
 	}
 
-	if (i915_gem_object_pin(intel_fb->obj, alignment))
-		return;
-
-	i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
-
-	Start = obj_priv->gtt_offset;
-	Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_gem_object_pin(intel_fb->obj, alignment);
+	if (ret != 0) {
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
 
-	I915_WRITE(dspstride, crtc->fb->pitch);
+	ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+	if (ret != 0) {
+		i915_gem_object_unpin(intel_fb->obj);
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
 
 	dspcntr = I915_READ(dspcntr_reg);
 	/* Mask out pixel format bits in case we change it */
@@ -419,11 +410,17 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		break;
 	default:
 		DRM_ERROR("Unknown color depth\n");
-		return;
+		i915_gem_object_unpin(intel_fb->obj);
+		mutex_unlock(&dev->struct_mutex);
+		return -EINVAL;
 	}
 	I915_WRITE(dspcntr_reg, dspcntr);
 
+	Start = obj_priv->gtt_offset;
+	Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
 	DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+	I915_WRITE(dspstride, crtc->fb->pitch);
 	if (IS_I965G(dev)) {
 		I915_WRITE(dspbase, Offset);
 		I915_READ(dspbase);
@@ -440,27 +437,24 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		intel_fb = to_intel_framebuffer(old_fb);
 		i915_gem_object_unpin(intel_fb->obj);
 	}
+	mutex_unlock(&dev->struct_mutex);
 
 	if (!dev->primary->master)
-		return;
+		return 0;
 
 	master_priv = dev->primary->master->driver_priv;
 	if (!master_priv->sarea_priv)
-		return;
+		return 0;
 
-	switch (pipe) {
-	case 0:
-		master_priv->sarea_priv->pipeA_x = x;
-		master_priv->sarea_priv->pipeA_y = y;
-		break;
-	case 1:
+	if (pipe) {
 		master_priv->sarea_priv->pipeB_x = x;
 		master_priv->sarea_priv->pipeB_y = y;
-		break;
-	default:
-		DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
-		break;
+	} else {
+		master_priv->sarea_priv->pipeA_x = x;
+		master_priv->sarea_priv->pipeA_y = y;
 	}
+
+	return 0;
 }
 
 
@@ -708,11 +702,11 @@ static int intel_panel_fitter_pipe (struct drm_device *dev)
 	return 1;
 }
 
-static void intel_crtc_mode_set(struct drm_crtc *crtc,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode,
-				int x, int y,
-				struct drm_framebuffer *old_fb)
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -732,13 +726,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc,
 	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
 	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
 	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
-	int refclk;
+	int refclk, num_outputs = 0;
 	intel_clock_t clock;
 	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
 	bool ok, is_sdvo = false, is_dvo = false;
 	bool is_crt = false, is_lvds = false, is_tv = false;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
+	int ret;
 
 	drm_vblank_pre_modeset(dev, pipe);
 
@@ -768,9 +763,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc,
 			is_crt = true;
 			break;
 		}
+
+		num_outputs++;
 	}
 
-	if (IS_I9XX(dev)) {
+	if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) {
+		refclk = dev_priv->lvds_ssc_freq * 1000;
+		DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
+	} else if (IS_I9XX(dev)) {
 		refclk = 96000;
 	} else {
 		refclk = 48000;
@@ -779,7 +779,7 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc,
 	ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
 	if (!ok) {
 		DRM_ERROR("Couldn't find PLL settings for mode!\n");
-		return;
+		return -EINVAL;
 	}
 
 	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
@@ -829,11 +829,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc,
 		}
 	}
 
-	if (is_tv) {
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
 		/* XXX: just matching BIOS for now */
-/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
 		dpll |= 3;
-	}
+	else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
 	else
 		dpll |= PLL_REF_INPUT_DREFCLK;
 
@@ -950,9 +953,13 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc,
 	I915_WRITE(dspcntr_reg, dspcntr);
 
 	/* Flush the plane changes */
-	intel_pipe_set_base(crtc, x, y, old_fb);
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+	if (ret != 0)
+	    return ret;
 
 	drm_vblank_post_modeset(dev, pipe);
+
+	return 0;
 }
 
 /** Loads the palette/gamma unit for the CRTC with the prepared values */
@@ -1023,18 +1030,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	}
 
 	/* we only need to pin inside GTT if cursor is non-phy */
+	mutex_lock(&dev->struct_mutex);
 	if (!dev_priv->cursor_needs_physical) {
 		ret = i915_gem_object_pin(bo, PAGE_SIZE);
 		if (ret) {
 			DRM_ERROR("failed to pin cursor bo\n");
-			goto fail;
+			goto fail_locked;
 		}
 		addr = obj_priv->gtt_offset;
 	} else {
 		ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
 		if (ret) {
 			DRM_ERROR("failed to attach phys object\n");
-			goto fail;
+			goto fail_locked;
 		}
 		addr = obj_priv->phys_obj->handle->busaddr;
 	}
@@ -1054,10 +1062,9 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 				i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
 		} else
 			i915_gem_object_unpin(intel_crtc->cursor_bo);
-		mutex_lock(&dev->struct_mutex);
 		drm_gem_object_unreference(intel_crtc->cursor_bo);
-		mutex_unlock(&dev->struct_mutex);
 	}
+	mutex_unlock(&dev->struct_mutex);
 
 	intel_crtc->cursor_addr = addr;
 	intel_crtc->cursor_bo = bo;
@@ -1065,6 +1072,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	return 0;
 fail:
 	mutex_lock(&dev->struct_mutex);
+fail_locked:
 	drm_gem_object_unreference(bo);
 	mutex_unlock(&dev->struct_mutex);
 	return ret;
@@ -1292,7 +1300,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 		}
 
 		/* XXX: Handle the 100Mhz refclk */
-		i9xx_clock(96000, &clock);
+		intel_clock(96000, &clock);
 	} else {
 		bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
 
@@ -1304,9 +1312,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 			if ((dpll & PLL_REF_INPUT_MASK) ==
 			    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
 				/* XXX: might not be 66MHz */
-				i8xx_clock(66000, &clock);
+				intel_clock(66000, &clock);
 			} else
-				i8xx_clock(48000, &clock);
+				intel_clock(48000, &clock);
 		} else {
 			if (dpll & PLL_P1_DIVIDE_BY_TWO)
 				clock.p1 = 2;
@@ -1319,7 +1327,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 			else
 				clock.p2 = 2;
 
-			i8xx_clock(48000, &clock);
+			intel_clock(48000, &clock);
 		}
 	}
 
@@ -1598,7 +1606,9 @@ intel_user_framebuffer_create(struct drm_device *dev,
 
 	ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
 	if (ret) {
+		mutex_lock(&dev->struct_mutex);
 		drm_gem_object_unreference(obj);
+		mutex_unlock(&dev->struct_mutex);
 		return NULL;
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index afd1217b8a02..b7f0ebe9f810 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -473,7 +473,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo);
 	if (ret) {
 		DRM_ERROR("failed to allocate fb.\n");
-		goto out_unref;
+		goto out_unpin;
 	}
 
 	list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list);
@@ -484,7 +484,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	info = framebuffer_alloc(sizeof(struct intelfb_par), device);
 	if (!info) {
 		ret = -ENOMEM;
-		goto out_unref;
+		goto out_unpin;
 	}
 
 	par = info->par;
@@ -513,7 +513,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 				       size);
 	if (!info->screen_base) {
 		ret = -ENOSPC;
-		goto out_unref;
+		goto out_unpin;
 	}
 	info->screen_size = size;
 
@@ -608,6 +608,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	mutex_unlock(&dev->struct_mutex);
 	return 0;
 
+out_unpin:
+	i915_gem_object_unpin(fbo);
 out_unref:
 	drm_gem_object_unreference(fbo);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6d4f91265354..0d211af98854 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -481,8 +481,6 @@ void intel_lvds_init(struct drm_device *dev)
 		if (dev_priv->panel_fixed_mode) {
 			dev_priv->panel_fixed_mode->type |=
 				DRM_MODE_TYPE_PREFERRED;
-			drm_mode_probed_add(connector,
-					    dev_priv->panel_fixed_mode);
 			goto out;
 		}
 	}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index a30508b639ba..fbe6f3931b1b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -193,7 +193,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
 
 #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
 /** Mapping of command numbers to names, for debug output */
-const static struct _sdvo_cmd_name {
+static const struct _sdvo_cmd_name {
 	u8 cmd;
 	char *name;
 } sdvo_cmd_names[] = {
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index fbb35dc56f5c..56485d67369b 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -411,7 +411,7 @@ struct tv_mode {
  * These values account for -1s required.
  */
 
-const static struct tv_mode tv_modes[] = {
+static const struct tv_mode tv_modes[] = {
 	{
 		.name		= "NTSC-M",
 		.clock		= 107520,
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index df4cf97e5d97..92965dbb3c14 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -557,8 +557,10 @@ static int radeon_do_engine_reset(struct drm_device * dev)
 }
 
 static void radeon_cp_init_ring_buffer(struct drm_device * dev,
-				       drm_radeon_private_t * dev_priv)
+				       drm_radeon_private_t *dev_priv,
+				       struct drm_file *file_priv)
 {
+	struct drm_radeon_master_private *master_priv;
 	u32 ring_start, cur_read_ptr;
 	u32 tmp;
 
@@ -677,6 +679,14 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev,
 	dev_priv->scratch[2] = 0;
 	RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0);
 
+	/* reset sarea copies of these */
+	master_priv = file_priv->master->driver_priv;
+	if (master_priv->sarea_priv) {
+		master_priv->sarea_priv->last_frame = 0;
+		master_priv->sarea_priv->last_dispatch = 0;
+		master_priv->sarea_priv->last_clear = 0;
+	}
+
 	radeon_do_wait_for_idle(dev_priv);
 
 	/* Sync everything up */
@@ -1215,7 +1225,7 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init,
 	}
 
 	radeon_cp_load_microcode(dev_priv);
-	radeon_cp_init_ring_buffer(dev, dev_priv);
+	radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
 
 	dev_priv->last_buf = 0;
 
@@ -1281,7 +1291,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev)
  *
  * Charl P. Botha <http://cpbotha.net>
  */
-static int radeon_do_resume_cp(struct drm_device * dev)
+static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv)
 {
 	drm_radeon_private_t *dev_priv = dev->dev_private;
 
@@ -1304,7 +1314,7 @@ static int radeon_do_resume_cp(struct drm_device * dev)
 	}
 
 	radeon_cp_load_microcode(dev_priv);
-	radeon_cp_init_ring_buffer(dev, dev_priv);
+	radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
 
 	radeon_do_engine_reset(dev);
 	radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
@@ -1479,8 +1489,7 @@ int radeon_cp_idle(struct drm_device *dev, void *data, struct drm_file *file_pri
  */
 int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
-
-	return radeon_do_resume_cp(dev);
+	return radeon_do_resume_cp(dev, file_priv);
 }
 
 int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 6cad69ed21c5..1cc967448f4d 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1300,7 +1300,13 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
@@ -1605,6 +1611,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
@@ -1612,10 +1619,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
@@ -1626,8 +1629,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 	{ }
 };
 
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e899f510ebeb..88511970508d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -348,6 +348,9 @@
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
+#define USB_VENDOR_ID_POWERCOM		0x0d9f
+#define USB_DEVICE_ID_POWERCOM_UPS	0x0002
+
 #define USB_VENDOR_ID_SAITEK		0x06a3
 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
 
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 732449628971..02b19db5442e 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -267,8 +267,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 		default:
 			{
 				struct hid_device *hid = dev->hid;
-				if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
-					return -EINVAL;
+				if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) {
+					ret = -EINVAL;
+					break;
+				}
 
 				if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
 					int len;
@@ -277,8 +279,9 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 					len = strlen(hid->name) + 1;
 					if (len > _IOC_SIZE(cmd))
 						len = _IOC_SIZE(cmd);
-					return copy_to_user(user_arg, hid->name, len) ?
+					ret = copy_to_user(user_arg, hid->name, len) ?
 						-EFAULT : len;
+					break;
 				}
 
 				if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
@@ -288,12 +291,13 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 					len = strlen(hid->phys) + 1;
 					if (len > _IOC_SIZE(cmd))
 						len = _IOC_SIZE(cmd);
-					return copy_to_user(user_arg, hid->phys, len) ?
+					ret = copy_to_user(user_arg, hid->phys, len) ?
 						-EFAULT : len;
+					break;
 				}
                 }
 
-			ret = -ENOTTY;
+		ret = -ENOTTY;
 	}
 	unlock_kernel();
 	return ret;
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 609cafff86bc..5f81ddf71508 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1872,7 +1872,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
 	if (devid != SIO_FINTEK_ID) {
-		printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
+		pr_debug(DRVNAME ": Not a Fintek device\n");
 		goto exit;
 	}
 
@@ -1932,7 +1932,7 @@ static int __init f71882fg_device_add(unsigned short address,
 	res.name = f71882fg_pdev->name;
 	err = acpi_check_resource_conflict(&res);
 	if (err)
-		return err;
+		goto exit_device_put;
 
 	err = platform_device_add_resources(f71882fg_pdev, &res, 1);
 	if (err) {
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index abf4dfc8ec22..29c83b5b9697 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -166,6 +166,18 @@ static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3};
 	},						\
 	.driver_data = &lis3lv02d_axis_##_axis		\
 }
+
+#define AXIS_DMI_MATCH2(_ident, _class1, _name1,	\
+				_class2, _name2,	\
+				_axis) {		\
+	.ident = _ident,				\
+	.callback = lis3lv02d_dmi_matched,		\
+	.matches = {					\
+		DMI_MATCH(DMI_##_class1, _name1),	\
+		DMI_MATCH(DMI_##_class2, _name2),	\
+	},						\
+	.driver_data = &lis3lv02d_axis_##_axis		\
+}
 static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	/* product names are truncated to match all kinds of a same model */
 	AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
@@ -179,6 +191,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
 	AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
 	AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+	/* Intel-based HP Pavilion dv5 */
+	AXIS_DMI_MATCH2("HPDV5_I",
+			PRODUCT_NAME, "HP Pavilion dv5",
+			BOARD_NAME, "3603",
+			x_inverted),
+	/* AMD-based HP Pavilion dv5 */
+	AXIS_DMI_MATCH2("HPDV5_A",
+			PRODUCT_NAME, "HP Pavilion dv5",
+			BOARD_NAME, "3600",
+			y_inverted),
 	{ NULL, }
 /* Laptop models without axis info (yet):
  * "NC6910" "HP Compaq 6910"
@@ -213,9 +235,49 @@ static struct delayed_led_classdev hpled_led = {
 	.set_brightness = hpled_set,
 };
 
+static acpi_status
+lis3lv02d_get_resource(struct acpi_resource *resource, void *context)
+{
+	if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+		struct acpi_resource_extended_irq *irq;
+		u32 *device_irq = context;
+
+		irq = &resource->data.extended_irq;
+		*device_irq = irq->interrupts[0];
+	}
+
+	return AE_OK;
+}
+
+static void lis3lv02d_enum_resources(struct acpi_device *device)
+{
+	acpi_status status;
+
+	status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+					lis3lv02d_get_resource, &adev.irq);
+	if (ACPI_FAILURE(status))
+		printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
+}
+
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+	u8 lo, hi;
+
+	adev.read(handle, reg - 1, &lo);
+	adev.read(handle, reg, &hi);
+	/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+	return (s16)((hi << 8) | lo);
+}
+
+static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
+{
+	s8 lo;
+	adev.read(handle, reg, &lo);
+	return lo;
+}
+
 static int lis3lv02d_add(struct acpi_device *device)
 {
-	u8 val;
 	int ret;
 
 	if (!device)
@@ -229,10 +291,22 @@ static int lis3lv02d_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
 	device->driver_data = &adev;
 
-	lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
-	if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+	lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
+	switch (adev.whoami) {
+	case LIS_DOUBLE_ID:
+		printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+		adev.read_data = lis3lv02d_read_16;
+		adev.mdps_max_val = 2048;
+		break;
+	case LIS_SINGLE_ID:
+		printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+		adev.read_data = lis3lv02d_read_8;
+		adev.mdps_max_val = 128;
+		break;
+	default:
 		printk(KERN_ERR DRIVER_NAME
-				": Accelerometer chip not LIS3LV02D{L,Q}\n");
+			": unknown sensor type 0x%X\n", adev.whoami);
+		return -EINVAL;
 	}
 
 	/* If possible use a "standard" axes order */
@@ -247,6 +321,9 @@ static int lis3lv02d_add(struct acpi_device *device)
 	if (ret)
 		return ret;
 
+	/* obtain IRQ number of our device from ACPI */
+	lis3lv02d_enum_resources(adev.device);
+
 	ret = lis3lv02d_init_device(&adev);
 	if (ret) {
 		flush_work(&hpled_led.work);
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 219d2d0d5a62..8bb2158f0453 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2007-2008 Yan Burman
  *  Copyright (C) 2008 Eric Piel
- *  Copyright (C) 2008 Pavel Machek
+ *  Copyright (C) 2008-2009 Pavel Machek
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -35,6 +35,7 @@
 #include <linux/poll.h>
 #include <linux/freezer.h>
 #include <linux/uaccess.h>
+#include <linux/miscdevice.h>
 #include <acpi/acpi_drivers.h>
 #include <asm/atomic.h>
 #include "lis3lv02d.h"
@@ -52,24 +53,14 @@
  * joystick.
  */
 
-/* Maximum value our axis may get for the input device (signed 12 bits) */
-#define MDPS_MAX_VAL 2048
+struct acpi_lis3lv02d adev = {
+	.misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+};
 
-struct acpi_lis3lv02d adev;
 EXPORT_SYMBOL_GPL(adev);
 
 static int lis3lv02d_add_fs(struct acpi_device *device);
 
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
-{
-	u8 lo, hi;
-
-	adev.read(handle, reg, &lo);
-	adev.read(handle, reg + 1, &hi);
-	/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
-	return (s16)((hi << 8) | lo);
-}
-
 /**
  * lis3lv02d_get_axis - For the given axis, give the value converted
  * @axis:      1,2,3 - can also be negative
@@ -98,9 +89,9 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
 {
 	int position[3];
 
-	position[0] = lis3lv02d_read_16(handle, OUTX_L);
-	position[1] = lis3lv02d_read_16(handle, OUTY_L);
-	position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+	position[0] = adev.read_data(handle, OUTX);
+	position[1] = adev.read_data(handle, OUTY);
+	position[2] = adev.read_data(handle, OUTZ);
 
 	*x = lis3lv02d_get_axis(adev.ac.x, position);
 	*y = lis3lv02d_get_axis(adev.ac.y, position);
@@ -110,26 +101,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
 void lis3lv02d_poweroff(acpi_handle handle)
 {
 	adev.is_on = 0;
-	/* disable X,Y,Z axis and power down */
-	adev.write(handle, CTRL_REG1, 0x00);
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
 
 void lis3lv02d_poweron(acpi_handle handle)
 {
-	u8 val;
-
 	adev.is_on = 1;
 	adev.init(handle);
-	adev.write(handle, FF_WU_CFG, 0);
-	/*
-	 * BDU: LSB and MSB values are not updated until both have been read.
-	 *      So the value read will always be correct.
-	 * IEN: Interrupt for free-fall and DD, not for data-ready.
-	 */
-	adev.read(handle, CTRL_REG2, &val);
-	val |= CTRL2_BDU | CTRL2_IEN;
-	adev.write(handle, CTRL_REG2, val);
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
 
@@ -162,6 +140,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
 	mutex_unlock(&dev->lock);
 }
 
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+	/*
+	 * Be careful: on some HP laptops the bios force DD when on battery and
+	 * the lid is closed. This leads to interrupts as soon as a little move
+	 * is done.
+	 */
+	atomic_inc(&adev.count);
+
+	wake_up_interruptible(&adev.misc_wait);
+	kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+	return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+	int ret;
+
+	if (test_and_set_bit(0, &adev.misc_opened))
+		return -EBUSY; /* already open */
+
+	atomic_set(&adev.count, 0);
+
+	/*
+	 * The sensor can generate interrupts for free-fall and direction
+	 * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+	 * the things simple and _fast_ we activate it only for free-fall, so
+	 * no need to read register (very slow with ACPI). For the same reason,
+	 * we forbid shared interrupts.
+	 *
+	 * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+	 * io-apic is not configurable (and generates a warning) but I keep it
+	 * in case of support for other hardware.
+	 */
+	ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+			  DRIVER_NAME, &adev);
+
+	if (ret) {
+		clear_bit(0, &adev.misc_opened);
+		printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+		return -EBUSY;
+	}
+	lis3lv02d_increase_use(&adev);
+	printk("lis3: registered interrupt %d\n", adev.irq);
+	return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+	fasync_helper(-1, file, 0, &adev.async_queue);
+	lis3lv02d_decrease_use(&adev);
+	free_irq(adev.irq, &adev);
+	clear_bit(0, &adev.misc_opened); /* release the device */
+	return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+				size_t count, loff_t *pos)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	u32 data;
+	unsigned char byte_data;
+	ssize_t retval = 1;
+
+	if (count < 1)
+		return -EINVAL;
+
+	add_wait_queue(&adev.misc_wait, &wait);
+	while (true) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		data = atomic_xchg(&adev.count, 0);
+		if (data)
+			break;
+
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto out;
+		}
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			goto out;
+		}
+
+		schedule();
+	}
+
+	if (data < 255)
+		byte_data = data;
+	else
+		byte_data = 255;
+
+	/* make sure we are not going into copy_to_user() with
+	 * TASK_INTERRUPTIBLE state */
+	set_current_state(TASK_RUNNING);
+	if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+		retval = -EFAULT;
+
+out:
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&adev.misc_wait, &wait);
+
+	return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &adev.misc_wait, wait);
+	if (atomic_read(&adev.count))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+	return fasync_helper(fd, file, on, &adev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+	.owner   = THIS_MODULE,
+	.llseek  = no_llseek,
+	.read    = lis3lv02d_misc_read,
+	.open    = lis3lv02d_misc_open,
+	.release = lis3lv02d_misc_release,
+	.poll    = lis3lv02d_misc_poll,
+	.fasync  = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+	.minor   = MISC_DYNAMIC_MINOR,
+	.name    = "freefall",
+	.fops    = &lis3lv02d_misc_fops,
+};
+
 /**
  * lis3lv02d_joystick_kthread - Kthread polling function
  * @data: unused - here to conform to threadfn prototype
@@ -203,7 +315,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input)
 	lis3lv02d_decrease_use(&adev);
 }
 
-
 static inline void lis3lv02d_calibrate_joystick(void)
 {
 	lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
@@ -231,9 +342,9 @@ int lis3lv02d_joystick_enable(void)
 	adev.idev->close      = lis3lv02d_joystick_close;
 
 	set_bit(EV_ABS, adev.idev->evbit);
-	input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
-	input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
-	input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+	input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+	input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+	input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
 
 	err = input_register_device(adev.idev);
 	if (err) {
@@ -250,6 +361,7 @@ void lis3lv02d_joystick_disable(void)
 	if (!adev.idev)
 		return;
 
+	misc_deregister(&lis3lv02d_misc_device);
 	input_unregister_device(adev.idev);
 	adev.idev = NULL;
 }
@@ -268,6 +380,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
 	if (lis3lv02d_joystick_enable())
 		printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
 
+	printk("lis3_init_device: irq %d\n", dev->irq);
+
+	/* if we did not get an IRQ from ACPI - we have nothing more to do */
+	if (!dev->irq) {
+		printk(KERN_ERR DRIVER_NAME
+			": No IRQ in ACPI. Disabling /dev/freefall\n");
+		goto out;
+	}
+
+	printk("lis3: registering device\n");
+	if (misc_register(&lis3lv02d_misc_device))
+		printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+out:
 	lis3lv02d_decrease_use(dev);
 	return 0;
 }
@@ -351,6 +476,6 @@ int lis3lv02d_remove_fs(void)
 EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
 
 MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
-MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 223f1c0763bb..75972bf372ff 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -22,12 +22,15 @@
 /*
  * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
  * be connected via SPI. There exists also several similar chips (such as LIS302DL or
- * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * LIS3L02DQ) and they have slightly different registers, but we can provide a
+ * common interface for all of them.
  * They can also be connected via I²C.
  */
 
-#define LIS3LV02DL_ID	0x3A /* Also the LIS3LV02DQ */
-#define LIS302DL_ID	0x3B /* Also the LIS202DL! */
+/* 2-byte registers */
+#define LIS_DOUBLE_ID	0x3A /* LIS3LV02D[LQ] */
+/* 1-byte registers */
+#define LIS_SINGLE_ID	0x3B /* LIS[32]02DL and others */
 
 enum lis3lv02d_reg {
 	WHO_AM_I	= 0x0F,
@@ -44,10 +47,13 @@ enum lis3lv02d_reg {
 	STATUS_REG	= 0x27,
 	OUTX_L		= 0x28,
 	OUTX_H		= 0x29,
+	OUTX		= 0x29,
 	OUTY_L		= 0x2A,
 	OUTY_H		= 0x2B,
+	OUTY		= 0x2B,
 	OUTZ_L		= 0x2C,
 	OUTZ_H		= 0x2D,
+	OUTZ		= 0x2D,
 	FF_WU_CFG	= 0x30,
 	FF_WU_SRC	= 0x31,
 	FF_WU_ACK	= 0x32,
@@ -159,6 +165,10 @@ struct acpi_lis3lv02d {
 	acpi_status (*write) (acpi_handle handle, int reg, u8 val);
 	acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
 
+	u8			whoami;    /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+	s16 (*read_data) (acpi_handle handle, int reg);
+	int			mdps_max_val;
+
 	struct input_dev	*idev;     /* input device */
 	struct task_struct	*kthread;  /* kthread for input */
 	struct mutex            lock;
@@ -170,6 +180,11 @@ struct acpi_lis3lv02d {
 	unsigned char		is_on;     /* whether the device is on or off */
 	unsigned char		usage;     /* usage counter */
 	struct axis_conversion	ac;        /* hw -> logical axis */
+
+	u32			irq;       /* IRQ number */
+	struct fasync_struct	*async_queue; /* queue for the misc device */
+	wait_queue_head_t	misc_wait; /* Wait queue for the misc device */
+	unsigned long		misc_opened; /* bit0: whether the device is open */
 };
 
 int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index b0ce37852281..73f77a9b8b18 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -1262,7 +1262,7 @@ static int __init vt1211_device_add(unsigned short address)
 	res.name = pdev->name;
 	err = acpi_check_resource_conflict(&res);
 	if (err)
-		goto EXIT;
+		goto EXIT_DEV_PUT;
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index cb808d015361..feae743ba991 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1548,7 +1548,7 @@ static int __init sensors_w83627ehf_init(void)
 
 	err = acpi_check_resource_conflict(&res);
 	if (err)
-		goto exit;
+		goto exit_device_put;
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index a34338567a2a..f14813be4eff 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions,
 	struct dpages old_pages = *dp;
 
 	if (sync)
-		rw |= (1 << BIO_RW_SYNC);
+		rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
 
 	/*
 	 * For multiple regions we need to be careful to rewind
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 3073618269ea..0a225da21272 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job)
 {
 	int r;
 	struct dm_io_request io_req = {
-		.bi_rw = job->rw | (1 << BIO_RW_SYNC),
+		.bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
 		.mem.type = DM_IO_PAGE_LIST,
 		.mem.ptr.pl = job->pages,
 		.mem.offset = job->offset,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4495104f6c9f..03b4cd0a6344 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
 	 * causes ENOTSUPP, we allocate a spare bio...
 	 */
 	struct bio *bio = bio_alloc(GFP_NOIO, 1);
-	int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC);
+	int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
 
 	bio->bi_bdev = rdev->bdev;
 	bio->bi_sector = sector;
@@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size,
 	struct completion event;
 	int ret;
 
-	rw |= (1 << BIO_RW_SYNC);
+	rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
 
 	bio->bi_bdev = bdev;
 	bio->bi_sector = sector;
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index de7adaf5fa5b..78412c9c424a 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -318,7 +318,6 @@ static int simple_std_setup(struct dvb_frontend *fe,
 			    u8 *config, u8 *cb)
 {
 	struct tuner_simple_priv *priv = fe->tuner_priv;
-	u8 tuneraddr;
 	int rc;
 
 	/* tv norm specific stuff for multi-norm tuners */
@@ -387,6 +386,7 @@ static int simple_std_setup(struct dvb_frontend *fe,
 
 	case TUNER_PHILIPS_TUV1236D:
 	{
+		struct tuner_i2c_props i2c = priv->i2c_props;
 		/* 0x40 -> ATSC antenna input 1 */
 		/* 0x48 -> ATSC antenna input 2 */
 		/* 0x00 -> NTSC antenna input 1 */
@@ -398,17 +398,15 @@ static int simple_std_setup(struct dvb_frontend *fe,
 			buffer[1] = 0x04;
 		}
 		/* set to the correct mode (analog or digital) */
-		tuneraddr = priv->i2c_props.addr;
-		priv->i2c_props.addr = 0x0a;
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
+		i2c.addr = 0x0a;
+		rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
 		if (2 != rc)
 			tuner_warn("i2c i/o error: rc == %d "
 				   "(should be 2)\n", rc);
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
+		rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
 		if (2 != rc)
 			tuner_warn("i2c i/o error: rc == %d "
 				   "(should be 2)\n", rc);
-		priv->i2c_props.addr = tuneraddr;
 		break;
 	}
 	}
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 0c733c66a441..069d847ba887 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 				       enum dmx_success success)
 {
 	struct dmxdev_filter *dmxdevfilter = filter->priv;
-	unsigned long flags;
 	int ret;
 
 	if (dmxdevfilter->buffer.error) {
 		wake_up(&dmxdevfilter->buffer.queue);
 		return 0;
 	}
-	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+	spin_lock(&dmxdevfilter->dev->lock);
 	if (dmxdevfilter->state != DMXDEV_STATE_GO) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		return 0;
 	}
 	del_timer(&dmxdevfilter->timer);
@@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 	}
 	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
 		dmxdevfilter->state = DMXDEV_STATE_DONE;
-	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&dmxdevfilter->buffer.queue);
 	return 0;
 }
@@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 {
 	struct dmxdev_filter *dmxdevfilter = feed->priv;
 	struct dvb_ringbuffer *buffer;
-	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+	spin_lock(&dmxdevfilter->dev->lock);
 	if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		return 0;
 	}
 
@@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 	else
 		buffer = &dmxdevfilter->dev->dvr_buffer;
 	if (buffer->error) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		wake_up(&buffer->queue);
 		return 0;
 	}
@@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 		dvb_ringbuffer_flush(buffer);
 		buffer->error = ret;
 	}
-	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&buffer->queue);
 	return 0;
 }
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index a2c1fd5d2f67..e2eca0b1fe7c 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 			      size_t count)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	while (count--) {
 		if (buf[0] == 0x47)
@@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 		buf += 188;
 	}
 
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
 
 void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
-	unsigned long flags;
 	int p = 0, i, j;
 
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter);
 
 void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
-	unsigned long flags;
 	int p = 0, i, j;
 	u8 tmppack[188];
 
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_204);
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 67cbce82cb91..4dfed6aa2dbc 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -98,11 +98,16 @@
  * 		- blacklisted KWorld radio in hid-core.c and hid-ids.h
  * 2008-12-03	Mark Lord <mlord@pobox.com>
  *		- add support for DealExtreme USB Radio
+ * 2009-01-31	Bob Ross <pigiron@gmx.com>
+ *		- correction of stereo detection/setting
+ *		- correction of signal strength indicator scaling
+ * 2009-01-31	Rick Bronson <rick@efn.org>
+ *		Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		- add LED status output
  *
  * ToDo:
  * - add firmware download/update support
  * - RDS support: interrupt mode, instead of polling
- * - add LED status output (check if that's not already done in firmware)
  */
 
 
@@ -882,6 +887,30 @@ static int si470x_rds_on(struct si470x_device *radio)
 
 
 /**************************************************************************
+ * General Driver Functions - LED_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_set_led_state - sets the led state
+ */
+static int si470x_set_led_state(struct si470x_device *radio,
+		unsigned char led_state)
+{
+	unsigned char buf[LED_REPORT_SIZE];
+	int retval;
+
+	buf[0] = LED_REPORT;
+	buf[1] = LED_COMMAND;
+	buf[2] = led_state;
+
+	retval = si470x_set_report(radio, (void *) &buf, sizeof(buf));
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
  * RDS Driver Functions
  **************************************************************************/
 
@@ -1385,20 +1414,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv,
 	};
 
 	/* stereo indicator == stereo (instead of mono) */
-	if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1)
-		tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
-	else
+	if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
 		tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+	else
+		tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 
 	/* mono/stereo selector */
-	if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1)
-		tuner->audmode = V4L2_TUNER_MODE_MONO;
-	else
+	if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
 		tuner->audmode = V4L2_TUNER_MODE_STEREO;
+	else
+		tuner->audmode = V4L2_TUNER_MODE_MONO;
 
 	/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
-	tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI)
-				* 0x0101;
+	/* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
+	tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
+	/* the ideal factor is 0xffff/75 = 873,8 */
+	tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
 
 	/* automatic frequency control: -1: freq to low, 1 freq to high */
 	/* AFCRL does only indicate that freq. differs, not if too low/high */
@@ -1632,6 +1663,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	/* set initial frequency */
 	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
 
+	/* set led to connect state */
+	si470x_set_led_state(radio, BLINK_GREEN_LED);
+
 	/* rds buffer allocation */
 	radio->buf_size = rds_buf * 3;
 	radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
@@ -1715,6 +1749,9 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf)
 	cancel_delayed_work_sync(&radio->work);
 	usb_set_intfdata(intf, NULL);
 	if (radio->users == 0) {
+		/* set led to disconnect state */
+		si470x_set_led_state(radio, BLINK_ORANGE_LED);
+
 		video_unregister_device(radio->videodev);
 		kfree(radio->buffer);
 		kfree(radio);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 2ed24527ecd6..65e4901f4db7 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -422,6 +422,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
 		if (urb == NULL)
 			break;
 
+		BUG_ON(!gspca_dev->dev);
 		gspca_dev->urb[i] = NULL;
 		if (!gspca_dev->present)
 			usb_kill_urb(urb);
@@ -1950,8 +1951,12 @@ void gspca_disconnect(struct usb_interface *intf)
 {
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
+	mutex_lock(&gspca_dev->usb_lock);
 	gspca_dev->present = 0;
+	mutex_unlock(&gspca_dev->usb_lock);
 
+	destroy_urbs(gspca_dev);
+	gspca_dev->dev = NULL;
 	usb_set_intfdata(intf, NULL);
 
 	/* release the device */
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index f6b3ef6e691b..c13bd2aa0bea 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -393,7 +393,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo
 		return 0;
 	}
 
-	v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+	v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
 	vbifmt->service_set = ivtv_get_service_set(vbifmt);
 	return 0;
 }
@@ -1748,6 +1748,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg)
 		break;
 	}
 
+	case IVTV_IOC_DMA_FRAME:
+	case VIDEO_GET_PTS:
+	case VIDEO_GET_FRAME_COUNT:
+	case VIDEO_GET_EVENT:
+	case VIDEO_PLAY:
+	case VIDEO_STOP:
+	case VIDEO_FREEZE:
+	case VIDEO_CONTINUE:
+	case VIDEO_COMMAND:
+	case VIDEO_TRY_COMMAND:
+		return ivtv_decoder_ioctls(file, cmd, (void *)arg);
+
 	default:
 		return -EINVAL;
 	}
@@ -1790,18 +1802,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp,
 		ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
 		return 0;
 
-	case IVTV_IOC_DMA_FRAME:
-	case VIDEO_GET_PTS:
-	case VIDEO_GET_FRAME_COUNT:
-	case VIDEO_GET_EVENT:
-	case VIDEO_PLAY:
-	case VIDEO_STOP:
-	case VIDEO_FREEZE:
-	case VIDEO_CONTINUE:
-	case VIDEO_COMMAND:
-	case VIDEO_TRY_COMMAND:
-		return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
-
 	default:
 		break;
 	}
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index 1a4d04664d6d..aa266e1f69b2 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -286,7 +286,7 @@ static int __init egpio_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		goto fail;
-	ei->base_addr = ioremap_nocache(res->start, res->end - res->start);
+	ei->base_addr = ioremap_nocache(res->start, resource_size(res));
 	if (!ei->base_addr)
 		goto fail;
 	pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr);
@@ -307,7 +307,7 @@ static int __init egpio_probe(struct platform_device *pdev)
 
 	ei->nchips = pdata->num_chips;
 	ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL);
-	if (!ei) {
+	if (!ei->chip) {
 		ret = -ENOMEM;
 		goto fail;
 	}
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index ea9488e7ad6d..2e36057659e1 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -678,6 +678,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 
 static struct i2c_device_id pcf50633_id_table[] = {
 	{"pcf50633", 0x73},
+	{/* end of list */}
 };
 
 static struct i2c_driver pcf50633_driver = {
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 0e5761f12634..4c7b7962f6b8 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1050,7 +1050,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 	return gpiochip_add(gchip);
 }
 
-static int sm501_register_gpio(struct sm501_devdata *sm)
+static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
 {
 	struct sm501_gpio *gpio = &sm->gpio;
 	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
@@ -1321,7 +1321,7 @@ static unsigned int sm501_mem_local[] = {
  * Common init code for an SM501
 */
 
-static int sm501_init_dev(struct sm501_devdata *sm)
+static int __devinit sm501_init_dev(struct sm501_devdata *sm)
 {
 	struct sm501_initdata *idata;
 	struct sm501_platdata *pdata;
@@ -1397,7 +1397,7 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 	return 0;
 }
 
-static int sm501_plat_probe(struct platform_device *dev)
+static int __devinit sm501_plat_probe(struct platform_device *dev)
 {
 	struct sm501_devdata *sm;
 	int ret;
@@ -1586,8 +1586,8 @@ static struct sm501_platdata sm501_pci_platdata = {
 	.gpio_base	= -1,
 };
 
-static int sm501_pci_probe(struct pci_dev *dev,
-			   const struct pci_device_id *id)
+static int __devinit sm501_pci_probe(struct pci_dev *dev,
+				     const struct pci_device_id *id)
 {
 	struct sm501_devdata *sm;
 	int err;
@@ -1693,7 +1693,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm)
 	sm501_gpio_remove(sm);
 }
 
-static void sm501_pci_remove(struct pci_dev *dev)
+static void __devexit sm501_pci_remove(struct pci_dev *dev)
 {
 	struct sm501_devdata *sm = pci_get_drvdata(dev);
 
@@ -1727,16 +1727,16 @@ static struct pci_device_id sm501_pci_tbl[] = {
 
 MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
 
-static struct pci_driver sm501_pci_drv = {
+static struct pci_driver sm501_pci_driver = {
 	.name		= "sm501",
 	.id_table	= sm501_pci_tbl,
 	.probe		= sm501_pci_probe,
-	.remove		= sm501_pci_remove,
+	.remove		= __devexit_p(sm501_pci_remove),
 };
 
 MODULE_ALIAS("platform:sm501");
 
-static struct platform_driver sm501_plat_drv = {
+static struct platform_driver sm501_plat_driver = {
 	.driver		= {
 		.name	= "sm501",
 		.owner	= THIS_MODULE,
@@ -1749,14 +1749,14 @@ static struct platform_driver sm501_plat_drv = {
 
 static int __init sm501_base_init(void)
 {
-	platform_driver_register(&sm501_plat_drv);
-	return pci_register_driver(&sm501_pci_drv);
+	platform_driver_register(&sm501_plat_driver);
+	return pci_register_driver(&sm501_pci_driver);
 }
 
 static void __exit sm501_base_exit(void)
 {
-	platform_driver_unregister(&sm501_plat_drv);
-	pci_unregister_driver(&sm501_pci_drv);
+	platform_driver_unregister(&sm501_plat_driver);
+	pci_unregister_driver(&sm501_pci_driver);
 }
 
 module_init(sm501_base_init);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e7ab0035d305..68826f1e36bc 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -38,7 +38,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #include <mach/cpu.h>
 #endif
 
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index f92595c8f165..84d5ea1ec171 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1111,7 +1111,7 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 	do {
 		schedule_timeout_interruptible(1);
 		reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
-	} while (tries-- && (reg & WM8350_AUXADC_POLL));
+	} while (--tries && (reg & WM8350_AUXADC_POLL));
 
 	if (!tries)
 		dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
@@ -1297,14 +1297,29 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350,
 int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		       struct wm8350_platform_data *pdata)
 {
-	int ret = -EINVAL;
+	int ret;
 	u16 id1, id2, mask_rev;
 	u16 cust_id, mode, chip_rev;
 
 	/* get WM8350 revision and config mode */
-	wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
-	wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
-	wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
+	ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
+	if (ret != 0) {
+		dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+		goto err;
+	}
+
+	ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+	if (ret != 0) {
+		dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+		goto err;
+	}
+
+	ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
+			       &mask_rev);
+	if (ret != 0) {
+		dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
+		goto err;
+	}
 
 	id1 = be16_to_cpu(id1);
 	id2 = be16_to_cpu(id2);
@@ -1404,14 +1419,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		return ret;
 	}
 
-	if (pdata && pdata->init) {
-		ret = pdata->init(wm8350);
-		if (ret != 0) {
-			dev_err(wm8350->dev, "Platform init() failed: %d\n",
-				ret);
-			goto err;
-		}
-	}
+	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
 
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
@@ -1430,6 +1443,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 	}
 	wm8350->chip_irq = irq;
 
+	if (pdata && pdata->init) {
+		ret = pdata->init(wm8350);
+		if (ret != 0) {
+			dev_err(wm8350->dev, "Platform init() failed: %d\n",
+				ret);
+			goto err;
+		}
+	}
+
 	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
 
 	wm8350_client_dev_register(wm8350, "wm8350-codec",
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 68887b817d17..9a4cc954cb7c 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -3188,7 +3188,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1   - ID */
 	{ 0x0000, 0x0000, 0x0000 }, /* R2 */
 	{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3   - System Control 1 */
-	{ 0xFCF7, 0xFCF7, 0xF800 }, /* R4   - System Control 2 */
+	{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4   - System Control 2 */
 	{ 0x80FF, 0x80FF, 0x8000 }, /* R5   - System Hibernate */
 	{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6   - Interface Control */
 	{ 0x0000, 0x0000, 0x0000 }, /* R7 */
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 45b1f430685f..513eb09a638f 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card)
 	if (err)
 		goto out;
 
-	string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2,
+	string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
 			cap_str, sizeof(cap_str));
 	printk(KERN_INFO "%s: %s %s %s %s\n",
 		md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b92b172074ee..b9f1e84897cc 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test)
 
 	sg_init_one(&sg, test->buffer, 512);
 
-	ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
+	ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0);
 	if (ret)
 		return ret;
 
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 76bfe16c09b1..2b1196e6142c 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave)
 {
 	struct dw_dma_slave *dws = slave;
 
-	if (dws->dma_dev == chan->device->dev)
+	if (dws->dma_dev == chan->device->dev) {
+		chan->private = dws;
 		return true;
-	else
+	} else
 		return false;
 }
 #endif
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index db37490f67ec..a631c81dce12 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -55,6 +55,7 @@
 #define VS30			(1 << 25)
 #define SDVS18			(0x5 << 9)
 #define SDVS30			(0x6 << 9)
+#define SDVS33			(0x7 << 9)
 #define SDVSCLR			0xFFFFF1FF
 #define SDVSDET			0x00000400
 #define AUTOIDLE		0x1
@@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
 }
 #endif  /* CONFIG_MMC_DEBUG */
 
+/*
+ * MMC controller internal state machines reset
+ *
+ * Used to reset command or data internal state machines, using respectively
+ *  SRC or SRD bit of SYSCTL register
+ * Can be called from interrupt context
+ */
+static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
+		unsigned long bit)
+{
+	unsigned long i = 0;
+	unsigned long limit = (loops_per_jiffy *
+				msecs_to_jiffies(MMC_TIMEOUT_MS));
+
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+			 OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+
+	while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
+		(i++ < limit))
+		cpu_relax();
+
+	if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
+		dev_err(mmc_dev(host->mmc),
+			"Timeout waiting on controller reset in %s\n",
+			__func__);
+}
 
 /*
  * MMC controller IRQ handler
@@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 			(status & CMD_CRC)) {
 			if (host->cmd) {
 				if (status & CMD_TIMEOUT) {
-					OMAP_HSMMC_WRITE(host->base, SYSCTL,
-						OMAP_HSMMC_READ(host->base,
-								SYSCTL) | SRC);
-					while (OMAP_HSMMC_READ(host->base,
-							SYSCTL) & SRC)
-						;
-
+					mmc_omap_reset_controller_fsm(host, SRC);
 					host->cmd->error = -ETIMEDOUT;
 				} else {
 					host->cmd->error = -EILSEQ;
 				}
 				end_cmd = 1;
 			}
-			if (host->data)
+			if (host->data) {
 				mmc_dma_cleanup(host);
+				mmc_omap_reset_controller_fsm(host, SRD);
+			}
 		}
 		if ((status & DATA_TIMEOUT) ||
 			(status & DATA_CRC)) {
@@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 					mmc_dma_cleanup(host);
 				else
 					host->data->error = -EILSEQ;
-				OMAP_HSMMC_WRITE(host->base, SYSCTL,
-					OMAP_HSMMC_READ(host->base,
-							SYSCTL) | SRD);
-				while (OMAP_HSMMC_READ(host->base,
-						SYSCTL) & SRD)
-					;
+				mmc_omap_reset_controller_fsm(host, SRD);
 				end_trans = 1;
 			}
 		}
@@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 }
 
 /*
- * Switch MMC operating voltage
+ * Switch MMC interface voltage ... only relevant for MMC1.
+ *
+ * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
+ * The MMC2 transceiver controls are used instead of DAT4..DAT7.
+ * Some chips, like eMMC ones, use internal transceivers.
  */
 static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
 {
 	u32 reg_val = 0;
 	int ret;
 
+	if (host->id != OMAP_MMC1_DEVID)
+		return 0;
+
 	/* Disable the clocks */
 	clk_disable(host->fclk);
 	clk_disable(host->iclk);
@@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
 	OMAP_HSMMC_WRITE(host->base, HCTL,
 		OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
 	reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+
 	/*
 	 * If a MMC dual voltage card is detected, the set_ios fn calls
 	 * this fn with VDD bit set for 1.8V. Upon card removal from the
 	 * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
 	 *
-	 * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
-	 * set in HCTL.
+	 * Cope with a bit of slop in the range ... per data sheets:
+	 *  - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
+	 *    but recommended values are 1.71V to 1.89V
+	 *  - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
+	 *    but recommended values are 2.7V to 3.3V
+	 *
+	 * Board setup code shouldn't permit anything very out-of-range.
+	 * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
+	 * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
 	 */
-	if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
-				((1 << vdd) == MMC_VDD_33_34)))
-		reg_val |= SDVS30;
-	if ((1 << vdd) == MMC_VDD_165_195)
+	if ((1 << vdd) <= MMC_VDD_23_24)
 		reg_val |= SDVS18;
+	else
+		reg_val |= SDVS30;
 
 	OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
 
@@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work)
 {
 	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
 						mmc_carddetect_work);
+	struct omap_mmc_slot_data *slot = &mmc_slot(host);
+
+	host->carddetect = slot->card_detect(slot->card_detect_irq);
 
 	sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
 	if (host->carddetect) {
 		mmc_detect_change(host->mmc, (HZ * 200) / 1000);
 	} else {
-		OMAP_HSMMC_WRITE(host->base, SYSCTL,
-			OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
-		while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
-			;
-
+		mmc_omap_reset_controller_fsm(host, SRD);
 		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
 	}
 }
@@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
 {
 	struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
 
-	host->carddetect = mmc_slot(host).card_detect(irq);
 	schedule_work(&host->mmc_carddetect_work);
 
 	return IRQ_HANDLED;
@@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
 		/*
-		 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+		 * Reset interface voltage to 3V if it's 1.8V now;
+		 * only relevant on MMC-1, the others always use 1.8V.
+		 *
 		 * REVISIT: If we are able to detect cards after unplugging
 		 * a 1.8V card, this code should not be needed.
 		 */
+		if (host->id != OMAP_MMC1_DEVID)
+			break;
 		if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
 			int vdd = fls(host->mmc->ocr_avail) - 1;
 			if (omap_mmc_switch_opcond(host, vdd) != 0)
@@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	if (host->id == OMAP_MMC1_DEVID) {
-		/* Only MMC1 can operate at 3V/1.8V */
+		/* Only MMC1 can interface at 3V without some flavor
+		 * of external transceiver; but they all handle 1.8V.
+		 */
 		if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
 			(ios->vdd == DUAL_VOLT_OCR_BIT)) {
 				/*
@@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
 						" level suspend\n");
 			}
 
-			if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+			if (host->id == OMAP_MMC1_DEVID
+					&& !(OMAP_HSMMC_READ(host->base, HCTL)
+							& SDVSDET)) {
 				OMAP_HSMMC_WRITE(host->base, HCTL,
 					OMAP_HSMMC_READ(host->base, HCTL)
 					& SDVSCLR);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 35a98eec7414..f4a67c65d301 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host)
 
 	to_ptr = host->base + host->sdidata;
 
-	while ((fifo = fifo_free(host))) {
+	while ((fifo = fifo_free(host)) > 3) {
 		if (!host->pio_bytes) {
 			res = get_data_buffer(host, &host->pio_bytes,
 							&host->pio_ptr);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index f07255cb17ee..8cff5f5e7f86 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
 			  SDHCI_QUIRK_32BIT_DMA_SIZE |
 			  SDHCI_QUIRK_32BIT_ADMA_SIZE |
 			  SDHCI_QUIRK_RESET_AFTER_REQUEST |
-			  SDHCI_QUIRK_BROKEN_SMALL_PIO |
-			  SDHCI_QUIRK_FORCE_HIGHSPEED;
+			  SDHCI_QUIRK_BROKEN_SMALL_PIO;
 	}
 
 	/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f99af67..f52f3053ed92 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	mmc->f_max = host->max_clk;
 	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 
-	if ((caps & SDHCI_CAN_DO_HISPD) ||
-		(host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
+	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
 
 	mmc->ocr_avail = 0;
@@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host)
 #endif
 
 #ifdef SDHCI_USE_LEDS_CLASS
-	host->led.name = mmc_hostname(mmc);
+	snprintf(host->led_name, sizeof(host->led_name),
+		"%s::", mmc_hostname(mmc));
+	host->led.name = host->led_name;
 	host->led.brightness = LED_OFF;
 	host->led.default_trigger = mmc_hostname(mmc);
 	host->led.brightness_set = sdhci_led_control;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba2363941..ebb83657e27a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,8 +208,6 @@ struct sdhci_host {
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
 /* Controller has an issue with buffer bits for small transfers */
 #define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
-/* Controller supports high speed but doesn't have the caps bit set */
-#define SDHCI_QUIRK_FORCE_HIGHSPEED			(1<<14)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
@@ -222,6 +220,7 @@ struct sdhci_host {
 
 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 	struct led_classdev	led;		/* LED control */
+	char   led_name[32];
 #endif
 
 	spinlock_t		lock;		/* Mutex */
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c98c1570a40b..47a33cec3793 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -139,7 +139,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct atmel_nand_host *host = nand_chip->priv;
 
-	return gpio_get_value(host->board->rdy_pin);
+	return gpio_get_value(host->board->rdy_pin) ^
+                !!host->board->rdy_pin_active_low;
 }
 
 /*
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index ad4cdd256137..0b28fccec03f 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -84,7 +84,7 @@ parport_atari_frob_control(struct parport *p, unsigned char mask,
 static unsigned char
 parport_atari_read_status(struct parport *p)
 {
-	return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+	return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
 		PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
 }
 
@@ -193,9 +193,9 @@ static int __init parport_atari_init(void)
 		sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
 		local_irq_restore(flags);
 		/* MFP port I0 as input. */
-		mfp.data_dir &= ~1;
+		st_mfp.data_dir &= ~1;
 		/* MFP port I0 interrupt on high->low edge. */
-		mfp.active_edge &= ~1;
+		st_mfp.active_edge &= ~1;
 		p = parport_register_port((unsigned long)&sound_ym.wd_data,
 					  IRQ_MFP_BUSY, PARPORT_DMA_NONE,
 					  &parport_atari_ops);
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index f4b7c79023ff..f3f686581a90 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -61,6 +61,8 @@
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
 
+static int rwbf_quirk;
+
 /*
  * 0: Present
  * 1-11: Reserved
@@ -785,7 +787,7 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu)
 	u32 val;
 	unsigned long flag;
 
-	if (!cap_rwbf(iommu->cap))
+	if (!rwbf_quirk && !cap_rwbf(iommu->cap))
 		return;
 	val = iommu->gcmd | DMA_GCMD_WBF;
 
@@ -3137,3 +3139,15 @@ static struct iommu_ops intel_iommu_ops = {
 	.unmap		= intel_iommu_unmap_range,
 	.iova_to_phys	= intel_iommu_iova_to_phys,
 };
+
+static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
+{
+	/*
+	 * Mobile 4 Series Chipset neglects to set RWBF capability,
+	 * but needs it:
+	 */
+	printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
+	rwbf_quirk = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 44f15ff70c1d..baba2eb5367d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -103,14 +103,12 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
 	}
 }
 
-/*
- * Essentially, this is ((1 << (1 << x)) - 1), but without the
- * undefinedness of a << 32.
- */
 static inline __attribute_const__ u32 msi_mask(unsigned x)
 {
-	static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
-	return mask[x];
+	/* Don't shift by >= width of type */
+	if (x >= 5)
+		return 0xffffffff;
+	return (1 << (1 << x)) - 1;
 }
 
 static void msix_flush_writes(struct irq_desc *desc)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e3efe6b19ee7..6d6120007af4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1540,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar)
 }
 
 /**
- *	pci_request_region - Reserved PCI I/O and memory resource
+ *	__pci_request_region - Reserved PCI I/O and memory resource
  *	@pdev: PCI device whose resources are to be reserved
  *	@bar: BAR to be reserved
  *	@res_name: Name to be associated with resource.
+ *	@exclusive: whether the region access is exclusive or not
  *
  *	Mark the PCI region associated with PCI device @pdev BR @bar as
  *	being reserved by owner @res_name.  Do not access any
  *	address inside the PCI regions unless this call returns
  *	successfully.
  *
+ *	If @exclusive is set, then the region is marked so that userspace
+ *	is explicitly not allowed to map the resource via /dev/mem or
+ * 	sysfs MMIO access.
+ *
  *	Returns 0 on success, or %EBUSY on error.  A warning
  *	message is also printed on failure.
  */
@@ -1588,12 +1593,12 @@ err_out:
 }
 
 /**
- *	pci_request_region - Reserved PCI I/O and memory resource
+ *	pci_request_region - Reserve PCI I/O and memory resource
  *	@pdev: PCI device whose resources are to be reserved
  *	@bar: BAR to be reserved
- *	@res_name: Name to be associated with resource.
+ *	@res_name: Name to be associated with resource
  *
- *	Mark the PCI region associated with PCI device @pdev BR @bar as
+ *	Mark the PCI region associated with PCI device @pdev BAR @bar as
  *	being reserved by owner @res_name.  Do not access any
  *	address inside the PCI regions unless this call returns
  *	successfully.
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 26ddf78ac300..07c0aa5275e6 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -16,21 +16,21 @@ extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
 #endif
 
 /**
- * Firmware PM callbacks
+ * struct pci_platform_pm_ops - Firmware PM callbacks
  *
- * @is_manageable - returns 'true' if given device is power manageable by the
- *                  platform firmware
+ * @is_manageable: returns 'true' if given device is power manageable by the
+ *                 platform firmware
  *
- * @set_state - invokes the platform firmware to set the device's power state
+ * @set_state: invokes the platform firmware to set the device's power state
  *
- * @choose_state - returns PCI power state of given device preferred by the
- *                 platform; to be used during system-wide transitions from a
- *                 sleeping state to the working state and vice versa
+ * @choose_state: returns PCI power state of given device preferred by the
+ *                platform; to be used during system-wide transitions from a
+ *                sleeping state to the working state and vice versa
  *
- * @can_wakeup - returns 'true' if given device is capable of waking up the
- *               system from a sleeping state
+ * @can_wakeup: returns 'true' if given device is capable of waking up the
+ *              system from a sleeping state
  *
- * @sleep_wake - enables/disables the system wake up capability of given device
+ * @sleep_wake: enables/disables the system wake up capability of given device
  *
  * If given platform is generally capable of power managing PCI devices, all of
  * these callbacks are mandatory.
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 29cbe47f219f..36864a935d68 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -55,6 +55,7 @@ void pci_disable_rom(struct pci_dev *pdev)
 
 /**
  * pci_get_rom_size - obtain the actual size of the ROM image
+ * @pdev: target PCI device
  * @rom: kernel virtual pointer to image of ROM
  * @size: size of PCI window
  *  return: size of actual ROM image
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 94363115a42a..b3866ad50227 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -62,6 +62,7 @@ config DELL_LAPTOP
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on POWER_SUPPLY
 	default n
 	---help---
 	This driver adds support for rfkill and backlight control to Dell
@@ -301,6 +302,7 @@ config INTEL_MENLOW
 config EEEPC_LAPTOP
 	tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
 	depends on ACPI
+	depends on INPUT
 	depends on EXPERIMENTAL
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 65dc41540c62..45940f31fe9e 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -166,6 +166,7 @@ struct fujitsu_hotkey_t {
 	struct platform_device *pf_device;
 	struct kfifo *fifo;
 	spinlock_t fifo_lock;
+	int rfkill_supported;
 	int rfkill_state;
 	int logolamp_registered;
 	int kblamps_registered;
@@ -526,7 +527,7 @@ static ssize_t
 show_lid_state(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+	if (!(fujitsu_hotkey->rfkill_supported & 0x100))
 		return sprintf(buf, "unknown\n");
 	if (fujitsu_hotkey->rfkill_state & 0x100)
 		return sprintf(buf, "open\n");
@@ -538,7 +539,7 @@ static ssize_t
 show_dock_state(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+	if (!(fujitsu_hotkey->rfkill_supported & 0x200))
 		return sprintf(buf, "unknown\n");
 	if (fujitsu_hotkey->rfkill_state & 0x200)
 		return sprintf(buf, "docked\n");
@@ -550,7 +551,7 @@ static ssize_t
 show_radios_state(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+	if (!(fujitsu_hotkey->rfkill_supported & 0x20))
 		return sprintf(buf, "unknown\n");
 	if (fujitsu_hotkey->rfkill_state & 0x20)
 		return sprintf(buf, "on\n");
@@ -928,8 +929,17 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 		; /* No action, result is discarded */
 	vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i);
 
-	fujitsu_hotkey->rfkill_state =
-		call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+	fujitsu_hotkey->rfkill_supported =
+		call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0);
+
+	/* Make sure our bitmask of supported functions is cleared if the
+	   RFKILL function block is not implemented, like on the S7020. */
+	if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD)
+		fujitsu_hotkey->rfkill_supported = 0;
+
+	if (fujitsu_hotkey->rfkill_supported)
+		fujitsu_hotkey->rfkill_state =
+			call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
 
 	/* Suspect this is a keymap of the application panel, print it */
 	printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
@@ -1005,8 +1015,9 @@ static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
 
 	input = fujitsu_hotkey->input;
 
-	fujitsu_hotkey->rfkill_state =
-		call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+	if (fujitsu_hotkey->rfkill_supported)
+		fujitsu_hotkey->rfkill_state =
+			call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
 
 	switch (event) {
 	case ACPI_FUJITSU_NOTIFY_CODE1:
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 1fd8f2193ed8..4377e93a43d7 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -280,8 +280,11 @@ sclp_dispatch_evbufs(struct sccb_header *sccb)
 	rc = 0;
 	for (offset = sizeof(struct sccb_header); offset < sccb->length;
 	     offset += evbuf->length) {
-		/* Search for event handler */
 		evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+		/* Check for malformed hardware response */
+		if (evbuf->length == 0)
+			break;
+		/* Search for event handler */
 		reg = NULL;
 		list_for_each(l, &sclp_reg_list) {
 			reg = list_entry(l, struct sclp_register, list);
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 506390496416..77ab6e34a100 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -19,6 +19,7 @@
 #include <linux/memory.h>
 #include <asm/chpid.h>
 #include <asm/sclp.h>
+#include <asm/setup.h>
 
 #include "sclp.h"
 
@@ -474,6 +475,10 @@ static void __init add_memory_merged(u16 rn)
 		goto skip_add;
 	if (start + size > VMEM_MAX_PHYS)
 		size = VMEM_MAX_PHYS - start;
+	if (memory_end_set && (start >= memory_end))
+		goto skip_add;
+	if (memory_end_set && (start + size > memory_end))
+		size = memory_end - start;
 	add_memory(0, start, size);
 skip_add:
 	first_rn = rn;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index a1a511bdec8c..ed1e728763a2 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1573,9 +1573,6 @@ static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd,
 	vfc_cmd->resp_len = sizeof(vfc_cmd->rsp);
 	vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata;
 	vfc_cmd->tgt_scsi_id = rport->port_id;
-	if ((rport->supported_classes & FC_COS_CLASS3) &&
-	    (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3))
-		vfc_cmd->flags = IBMVFC_CLASS_3_ERR;
 	vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd);
 	int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun);
 	memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len);
@@ -3266,6 +3263,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id)
 		return -ENOMEM;
 	}
 
+	memset(tgt, 0, sizeof(*tgt));
 	tgt->scsi_id = scsi_id;
 	tgt->new_scsi_id = scsi_id;
 	tgt->vhost = vhost;
@@ -3576,9 +3574,18 @@ static void ibmvfc_log_ae(struct ibmvfc_host *vhost, int events)
 static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 {
 	struct ibmvfc_host *vhost = tgt->vhost;
-	struct fc_rport *rport;
+	struct fc_rport *rport = tgt->rport;
 	unsigned long flags;
 
+	if (rport) {
+		tgt_dbg(tgt, "Setting rport roles\n");
+		fc_remote_port_rolechg(rport, tgt->ids.roles);
+		spin_lock_irqsave(vhost->host->host_lock, flags);
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+		spin_unlock_irqrestore(vhost->host->host_lock, flags);
+		return;
+	}
+
 	tgt_dbg(tgt, "Adding rport\n");
 	rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
 	spin_lock_irqsave(vhost->host->host_lock, flags);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 87dafd0f8d44..b21e071b9862 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -32,7 +32,7 @@
 #define IBMVFC_DRIVER_VERSION		"1.0.4"
 #define IBMVFC_DRIVER_DATE		"(November 14, 2008)"
 
-#define IBMVFC_DEFAULT_TIMEOUT	15
+#define IBMVFC_DEFAULT_TIMEOUT	60
 #define IBMVFC_INIT_TIMEOUT		120
 #define IBMVFC_MAX_REQUESTS_DEFAULT	100
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 74d07d137dae..c9aa7611e408 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -432,6 +432,7 @@ static int map_sg_data(struct scsi_cmnd *cmd,
 				sdev_printk(KERN_ERR, cmd->device,
 				            "Can't allocate memory "
 				            "for indirect table\n");
+			scsi_dma_unmap(cmd);
 			return 0;
 		}
 	}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 257c24115de9..809d32d95c76 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1998,6 +1998,8 @@ int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev)
 	if (!shost->can_queue)
 		shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX;
 
+	if (!shost->transportt->eh_timed_out)
+		shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
 	return scsi_add_host(shost, pdev);
 }
 EXPORT_SYMBOL_GPL(iscsi_host_add);
@@ -2020,7 +2022,6 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
 	shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size);
 	if (!shost)
 		return NULL;
-	shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
 
 	if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) {
 		if (qdepth != 0)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a8f30bdaff69..a7302480bc4a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5258,6 +5258,7 @@ lpfc_send_els_event(struct lpfc_vport *vport,
 			sizeof(struct lpfc_name));
 		break;
 	default:
+		kfree(els_data);
 		return;
 	}
 	memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name));
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 33a3c13fd893..f4c57227ec18 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1265,13 +1265,6 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 	    test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
 		msleep(1000);
 
-	if (ha->mqenable) {
-		if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
-			qla_printk(KERN_WARNING, ha,
-				"Queue delete failed.\n");
-		vha->req_ques[0] = ha->req_q_map[0]->id;
-	}
-
 	qla24xx_disable_vp(vha);
 
 	fc_remove_host(vha->host);
@@ -1293,6 +1286,12 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 		    vha->host_no, vha->vp_idx, vha));
         }
 
+	if (ha->mqenable) {
+		if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+			qla_printk(KERN_WARNING, ha,
+				"Queue delete failed.\n");
+	}
+
 	scsi_host_put(vha->host);
 	qla_printk(KERN_INFO, ha, "vport %d deleted\n", id);
 	return 0;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 023ee77fb027..e0c5bb54b258 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2135,6 +2135,7 @@ struct qla_msix_entry {
 /* Work events.  */
 enum qla_work_type {
 	QLA_EVT_AEN,
+	QLA_EVT_IDC_ACK,
 };
 
 
@@ -2149,6 +2150,10 @@ struct qla_work_evt {
 			enum fc_host_event_code code;
 			u32 data;
 		} aen;
+		struct {
+#define QLA_IDC_ACK_REGS	7
+			uint16_t mb[QLA_IDC_ACK_REGS];
+		} idc_ack;
 	} u;
 };
 
diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h
index d78d35e681ab..d6ea69df7c5c 100644
--- a/drivers/scsi/qla2xxx/qla_devtbl.h
+++ b/drivers/scsi/qla2xxx/qla_devtbl.h
@@ -72,7 +72,7 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = {
 	"QLA2462",	"Sun PCI-X 2.0 to 4Gb FC, Dual Channel",	/* 0x141 */
 	"QLE2460",	"Sun PCI-Express to 2Gb FC, Single Channel",	/* 0x142 */
 	"QLE2462",	"Sun PCI-Express to 4Gb FC, Single Channel",	/* 0x143 */
-	"QEM2462"	"Server I/O Module 4Gb FC, Dual Channel",	/* 0x144 */
+	"QEM2462",	"Server I/O Module 4Gb FC, Dual Channel",	/* 0x144 */
 	"QLE2440",	"PCI-Express to 4Gb FC, Single Channel",	/* 0x145 */
 	"QLE2464",	"PCI-Express to 4Gb FC, Quad Channel",		/* 0x146 */
 	"QLA2440",	"PCI-X 2.0 to 4Gb FC, Single Channel",		/* 0x147 */
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 7abb045a0410..ffff42554087 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1402,6 +1402,8 @@ struct access_chip_rsp_84xx {
 #define MBA_IDC_NOTIFY		0x8101
 #define MBA_IDC_TIME_EXT	0x8102
 
+#define MBC_IDC_ACK		0x101
+
 struct nvram_81xx {
 	/* NVRAM header. */
 	uint8_t id[4];
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index a336b4bc81a7..6de283f8f111 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -72,6 +72,7 @@ extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
 extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
     fc_host_event_code, u32);
+extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *);
 
 extern void qla2x00_abort_fcport_cmds(fc_port_t *);
 extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *,
@@ -266,6 +267,8 @@ qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
 
 extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *);
 
+extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
@@ -376,10 +379,8 @@ extern int qla2x00_dfs_remove(scsi_qla_host_t *);
 
 /* Globa function prototypes for multi-q */
 extern int qla25xx_request_irq(struct rsp_que *);
-extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *,
-	uint8_t);
-extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *,
-	uint8_t);
+extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
+extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
 	uint16_t, uint8_t, uint8_t);
 extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f6368a1d3021..986501759ad4 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1226,9 +1226,8 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
 			icb->firmware_options_2 |=
 				__constant_cpu_to_le32(BIT_18);
 
-		icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22);
+		icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22);
 		icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23);
-		ha->rsp_q_map[0]->options = icb->firmware_options_2;
 
 		WRT_REG_DWORD(&reg->isp25mq.req_q_in, 0);
 		WRT_REG_DWORD(&reg->isp25mq.req_q_out, 0);
@@ -3493,7 +3492,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 		rsp = ha->rsp_q_map[i];
 		if (rsp) {
 			rsp->options &= ~BIT_0;
-			ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options);
+			ret = qla25xx_init_rsp_que(base_vha, rsp);
 			if (ret != QLA_SUCCESS)
 				DEBUG2_17(printk(KERN_WARNING
 					"%s Rsp que:%d init failed\n", __func__,
@@ -3507,7 +3506,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 		if (req) {
 		/* Clear outstanding commands array. */
 			req->options &= ~BIT_0;
-			ret = qla25xx_init_req_que(base_vha, req, req->options);
+			ret = qla25xx_init_req_que(base_vha, req);
 			if (ret != QLA_SUCCESS)
 				DEBUG2_17(printk(KERN_WARNING
 					"%s Req que:%d init failed\n", __func__,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e28ad81baf1e..f250e5b7897c 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -266,6 +266,40 @@ qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
 	}
 }
 
+static void
+qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
+{
+	static char *event[] =
+		{ "Complete", "Request Notification", "Time Extension" };
+	int rval;
+	struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24;
+	uint16_t __iomem *wptr;
+	uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS];
+
+	/* Seed data -- mailbox1 -> mailbox7. */
+	wptr = (uint16_t __iomem *)&reg24->mailbox1;
+	for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++)
+		mb[cnt] = RD_REG_WORD(wptr);
+
+	DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+	    "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no,
+	    event[aen & 0xff],
+	    mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6]));
+
+	/* Acknowledgement needed? [Notify && non-zero timeout]. */
+	timeout = (descr >> 8) & 0xf;
+	if (aen != MBA_IDC_NOTIFY || !timeout)
+		return;
+
+	DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+	    "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout));
+
+	rval = qla2x00_post_idc_ack_work(vha, mb);
+	if (rval != QLA_SUCCESS)
+		qla_printk(KERN_WARNING, vha->hw,
+		    "IDC failed to post ACK.\n");
+}
+
 /**
  * qla2x00_async_event() - Process aynchronous events.
  * @ha: SCSI driver HA context
@@ -714,21 +748,9 @@ skip_rio:
 		    "%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
 		break;
 	case MBA_IDC_COMPLETE:
-		DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
-		    "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2],
-		    mb[3]));
-		break;
 	case MBA_IDC_NOTIFY:
-		DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
-		    "Request Notification -- %04x %04x %04x\n", vha->host_no,
-		    mb[1], mb[2], mb[3]));
-		/**** Mailbox registers 4 - 7 valid!!! */
-		break;
 	case MBA_IDC_TIME_EXT:
-		DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
-		    "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1],
-		    mb[2], mb[3]));
-		/**** Mailbox registers 4 - 7 valid!!! */
+		qla81xx_idc_event(vha, mb[0], mb[1]);
 		break;
 	}
 
@@ -1707,7 +1729,6 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_24xx __iomem *reg;
-	uint16_t msix_disabled_hccr = 0;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1720,17 +1741,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
 
 	spin_lock_irq(&ha->hardware_lock);
 
-	msix_disabled_hccr = rsp->options;
-	if (!rsp->id)
-		msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22);
-	else
-		msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6);
-
 	qla24xx_process_response_queue(rsp);
 
-	if (!msix_disabled_hccr)
-		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
-
 	spin_unlock_irq(&ha->hardware_lock);
 
 	return IRQ_HANDLED;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index f94ffbb98e95..4c7504cb3990 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3090,8 +3090,7 @@ verify_done:
 }
 
 int
-qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
-	uint8_t options)
+qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
 {
 	int rval;
 	unsigned long flags;
@@ -3101,7 +3100,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
 	struct qla_hw_data *ha = vha->hw;
 
 	mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
-	mcp->mb[1] = options;
+	mcp->mb[1] = req->options;
 	mcp->mb[2] = MSW(LSD(req->dma));
 	mcp->mb[3] = LSW(LSD(req->dma));
 	mcp->mb[6] = MSW(MSD(req->dma));
@@ -3128,7 +3127,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
 	mcp->tov = 60;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	if (!(options & BIT_0)) {
+	if (!(req->options & BIT_0)) {
 		WRT_REG_DWORD(&reg->req_q_in, 0);
 		WRT_REG_DWORD(&reg->req_q_out, 0);
 	}
@@ -3142,8 +3141,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
 }
 
 int
-qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
-	uint8_t options)
+qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 {
 	int rval;
 	unsigned long flags;
@@ -3153,7 +3151,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
 	struct qla_hw_data *ha = vha->hw;
 
 	mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
-	mcp->mb[1] = options;
+	mcp->mb[1] = rsp->options;
 	mcp->mb[2] = MSW(LSD(rsp->dma));
 	mcp->mb[3] = LSW(LSD(rsp->dma));
 	mcp->mb[6] = MSW(MSD(rsp->dma));
@@ -3178,7 +3176,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
 	mcp->tov = 60;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	if (!(options & BIT_0)) {
+	if (!(rsp->options & BIT_0)) {
 		WRT_REG_DWORD(&reg->rsp_q_out, 0);
 		WRT_REG_DWORD(&reg->rsp_q_in, 0);
 	}
@@ -3193,3 +3191,29 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
 	return rval;
 }
 
+int
+qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_IDC_ACK;
+	memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+	mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f53179c46423..3f23932210c4 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -396,7 +396,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 
 	qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
 
-	memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES);
+	memset(vha->req_ques, 0, sizeof(vha->req_ques));
 	vha->req_ques[0] = ha->req_q_map[0]->id;
 	host->can_queue = ha->req_q_map[0]->length + 128;
 	host->this_id = 255;
@@ -471,7 +471,7 @@ qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
 
 	if (req) {
 		req->options |= BIT_0;
-		ret = qla25xx_init_req_que(vha, req, req->options);
+		ret = qla25xx_init_req_que(vha, req);
 	}
 	if (ret == QLA_SUCCESS)
 		qla25xx_free_req_que(vha, req);
@@ -486,7 +486,7 @@ qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 
 	if (rsp) {
 		rsp->options |= BIT_0;
-		ret = qla25xx_init_rsp_que(vha, rsp, rsp->options);
+		ret = qla25xx_init_rsp_que(vha, rsp);
 	}
 	if (ret == QLA_SUCCESS)
 		qla25xx_free_rsp_que(vha, rsp);
@@ -502,7 +502,7 @@ int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos)
 
 	req->options |= BIT_3;
 	req->qos = qos;
-	ret = qla25xx_init_req_que(vha, req, req->options);
+	ret = qla25xx_init_req_que(vha, req);
 	if (ret != QLA_SUCCESS)
 		DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__));
 	/* restore options bit */
@@ -632,7 +632,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	req->max_q_depth = ha->req_q_map[0]->max_q_depth;
 	mutex_unlock(&ha->vport_lock);
 
-	ret = qla25xx_init_req_que(base_vha, req, options);
+	ret = qla25xx_init_req_que(base_vha, req);
 	if (ret != QLA_SUCCESS) {
 		qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
 		mutex_lock(&ha->vport_lock);
@@ -710,7 +710,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	if (ret)
 		goto que_failed;
 
-	ret = qla25xx_init_rsp_que(base_vha, rsp, options);
+	ret = qla25xx_init_rsp_que(base_vha, rsp);
 	if (ret != QLA_SUCCESS) {
 		qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
 		mutex_lock(&ha->vport_lock);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c11f872d3e10..2f5f72531e23 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2522,6 +2522,19 @@ qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code,
 	return qla2x00_post_work(vha, e, 1);
 }
 
+int
+qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
+{
+	struct qla_work_evt *e;
+
+	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+	if (!e)
+		return QLA_FUNCTION_FAILED;
+
+	memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+	return qla2x00_post_work(vha, e, 1);
+}
+
 static void
 qla2x00_do_work(struct scsi_qla_host *vha)
 {
@@ -2539,6 +2552,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)
 			fc_host_post_event(vha->host, fc_get_event_number(),
 			    e->u.aen.code, e->u.aen.data);
 			break;
+		case QLA_EVT_IDC_ACK:
+			qla81xx_idc_ack(vha, e->u.idc_ack.mb);
+			break;
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 9c3b694c049d..284827926eff 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -684,7 +684,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 		    "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
 		    le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
 
-		switch (le32_to_cpu(region->code)) {
+		switch (le32_to_cpu(region->code) & 0xff) {
 		case FLT_REG_FW:
 			ha->flt_region_fw = start;
 			break;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index cfa4c11a4797..79f7053da99b 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k2"
+#define QLA2XXX_VERSION      "8.03.00-k3"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 66505bb79410..8f4de20c9deb 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	return sdev;
 
 out_device_destroy:
+	scsi_device_set_state(sdev, SDEV_DEL);
 	transport_destroy_device(&sdev->sdev_gendev);
 	put_device(&sdev->sdev_gendev);
 out:
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 8f0bd3f7a59f..516925d8b570 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1078,7 +1078,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 	case BLKTRACESETUP:
 		return blk_trace_setup(sdp->device->request_queue,
 				       sdp->disk->disk_name,
-				       sdp->device->sdev_gendev.devt,
+				       MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
 				       (char *)arg);
 	case BLKTRACESTART:
 		return blk_trace_startstop(sdp->device->request_queue, 1);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d934bfbdd9b..b4b39811b445 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port)
 
 	serial8250_set_mctrl(&up->port, up->port.mctrl);
 
+	/* Serial over Lan (SoL) hack:
+	   Intel 8257x Gigabit ethernet chips have a
+	   16550 emulation, to be used for Serial Over Lan.
+	   Those chips take a longer time than a normal
+	   serial device to signalize that a transmission
+	   data was queued. Due to that, the above test generally
+	   fails. One solution would be to delay the reading of
+	   iir. However, this is not reliable, since the timeout
+	   is variable. So, let's just don't test if we receive
+	   TX irq. This way, we'll never enable UART_BUG_TXEN.
+	 */
+	if (up->port.flags & UPF_NO_TXEN_TEST)
+		goto dont_test_tx_en;
+
 	/*
 	 * Do a quick test to see if we receive an
 	 * interrupt when we enable the TX irq.
@@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port)
 		up->bugs &= ~UART_BUG_TXEN;
 	}
 
+dont_test_tx_en:
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	/*
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 536d8e510f66..533f82025adf 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int skip_tx_en_setup(struct serial_private *priv,
+			const struct pciserial_board *board,
+			struct uart_port *port, int idx)
+{
+	port->flags |= UPF_NO_TXEN_TEST;
+	printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+			  "[%04x:%04x] subsystem [%04x:%04x]\n",
+			  priv->dev->vendor,
+			  priv->dev->device,
+			  priv->dev->subsystem_vendor,
+			  priv->dev->subsystem_device);
+
+	return pci_default_setup(priv, board, port, idx);
+}
+
 /* This should be in linux/pci_ids.h */
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
@@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.init		= pci_inteli960ni_init,
 		.setup		= pci_default_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_8257X_SOL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= skip_tx_en_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_82573L_SOL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= skip_tx_en_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_82573E_SOL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= skip_tx_en_setup,
+	},
 	/*
 	 * ITE
 	 */
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 89362d733d62..8f58f7ff0dd7 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port)
 		}
 	}
 
+	/* Save current CSR for comparison in atmel_tasklet_func() */
+	atmel_port->irq_status_prev = UART_GET_CSR(port);
+	atmel_port->irq_status = atmel_port->irq_status_prev;
+
 	/*
 	 * Finally, enable the serial port
 	 */
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 92187e28608a..ac79cbe4c2cf 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	brd->pci_dev = pdev;
 	if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
 		brd->maxports = 4;
+	else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+		brd->maxports = 8;
 	else
 		brd->maxports = 2;
 
@@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
index 49698cabc30d..f5ed9721aabb 100644
--- a/drivers/spi/spi_gpio.c
+++ b/drivers/spi/spi_gpio.c
@@ -114,7 +114,7 @@ static inline void setmosi(const struct spi_device *spi, int is_on)
 
 static inline int getmiso(const struct spi_device *spi)
 {
-	return gpio_get_value(SPI_MISO_GPIO);
+	return !!gpio_get_value(SPI_MISO_GPIO);
 }
 
 #undef pdata
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index c54fc40458b1..a4301dc02d27 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -298,19 +298,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
- * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume_early.
- */
-int usb_hcd_pci_resume_early(struct pci_dev *dev)
-{
-	pci_restore_state(dev);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
-
-/**
  * usb_hcd_pci_resume - power management resume of a PCI-based HCD
  * @dev: USB Host Controller being resumed
  *
@@ -333,6 +320,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
 	}
 #endif
 
+	pci_restore_state(dev);
+
 	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
 		dev_dbg(hcd->self.controller,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 5b94a56bec23..f750eb1ab595 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
 
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 9b36205c5759..0ce4e2819847 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
 
 	/* most IN status is the same, but ISO can't stall */
 	*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
-		| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
-			? 0 : UDCCS_BI_SST;
+		| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+			? 0 : UDCCS_BI_SST);
 }
 
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bb21fb0a4969..abb9a7706ec7 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
 	.shutdown = 	usb_hcd_pci_shutdown,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 5d625c3fd423..f9961b4c0da3 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
 
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 944f7e0ca4df..cf5e4cf7ea42 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif	/* PM */
 };
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 2291c5f5af51..958751ccea43 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -227,13 +227,13 @@ void scan_async_work(struct work_struct *work)
 	 * Now that the ASL is updated, complete the removal of any
 	 * removed qsets.
 	 */
-	spin_lock(&whc->lock);
+	spin_lock_irq(&whc->lock);
 
 	list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
 		qset_remove_complete(whc, qset);
 	}
 
-	spin_unlock(&whc->lock);
+	spin_unlock_irq(&whc->lock);
 }
 
 /**
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 7dc85a0bee7c..df8b85f07092 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -255,13 +255,13 @@ void scan_periodic_work(struct work_struct *work)
 	 * Now that the PZL is updated, complete the removal of any
 	 * removed qsets.
 	 */
-	spin_lock(&whc->lock);
+	spin_lock_irq(&whc->lock);
 
 	list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
 		qset_remove_complete(whc, qset);
 	}
 
-	spin_unlock(&whc->lock);
+	spin_unlock_irq(&whc->lock);
 }
 
 /**
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bf0af660df8a..fb19803060cf 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1054,10 +1054,7 @@ config FB_RIVA_BACKLIGHT
 
 config FB_I810
 	tristate "Intel 810/815 support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI && X86_32
-	select AGP
-	select AGP_INTEL
-	select FB
+	depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1120,10 +1117,7 @@ config FB_CARILLO_RANCH
 
 config FB_INTEL
 	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI && X86
-	select FB
-	select AGP
-	select AGP_INTEL
+	depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 8058572a7428..018850c116c6 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -841,7 +841,7 @@ static int tt_detect(void)
 		tt_dmasnd.ctrl = DMASND_CTRL_OFF;
 		udelay(20);		/* wait a while for things to settle down */
 	}
-	mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+	mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
 
 	tt_get_par(&par);
 	tt_encode_var(&atafb_predefined[0], &par);
@@ -2035,7 +2035,7 @@ static int stste_detect(void)
 		tt_dmasnd.ctrl = DMASND_CTRL_OFF;
 		udelay(20);		/* wait a while for things to settle down */
 	}
-	mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+	mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
 
 	stste_get_par(&par);
 	stste_encode_var(&atafb_predefined[0], &par);
@@ -2086,20 +2086,20 @@ static void st_ovsc_switch(void)
 		return;
 	local_irq_save(flags);
 
-	mfp.tim_ct_b = 0x10;
-	mfp.active_edge |= 8;
-	mfp.tim_ct_b = 0;
-	mfp.tim_dt_b = 0xf0;
-	mfp.tim_ct_b = 8;
-	while (mfp.tim_dt_b > 1)	/* TOS does it this way, don't ask why */
+	st_mfp.tim_ct_b = 0x10;
+	st_mfp.active_edge |= 8;
+	st_mfp.tim_ct_b = 0;
+	st_mfp.tim_dt_b = 0xf0;
+	st_mfp.tim_ct_b = 8;
+	while (st_mfp.tim_dt_b > 1)	/* TOS does it this way, don't ask why */
 		;
-	new = mfp.tim_dt_b;
+	new = st_mfp.tim_dt_b;
 	do {
 		udelay(LINE_DELAY);
 		old = new;
-		new = mfp.tim_dt_b;
+		new = st_mfp.tim_dt_b;
 	} while (old != new);
-	mfp.tim_ct_b = 0x10;
+	st_mfp.tim_ct_b = 0x10;
 	udelay(SYNC_DELAY);
 
 	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index e6e299feb51b..2181ce4d7ebd 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2365,7 +2365,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx
 static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 {
 	u32	pmgt;
-	u16	pwr_command;
 	struct pci_dev *pdev = par->pdev;
 
 	if (!par->pm_reg)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 09a3d5522b43..325c10ff6a2c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -406,7 +406,7 @@ config ITCO_WDT
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller
-	  Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 	  controller hub.
 
 	  The TCO (Total Cost of Ownership) timer is a watchdog timer
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 5531691f46ea..e35d54589232 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file)
 static int at91_wdt_settimeout(int new_time)
 {
 	/*
-	 * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
 	 *
 	 * Since WDV is a 16-bit counter, the maximum period is
-	 * 65536 / 0.256 = 256 seconds.
+	 * 65536 / 256 = 256 seconds.
 	 */
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b1da287f90ec..a56ac84381b1 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index 2474ebca88f6..d8264ad0be41 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO vendor specific watchdog driver support
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.02"
+#define DRV_VERSION	"1.03"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n
  *	    20.6 seconds.
  */
 
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+	val32 = inl(SMI_EN);
+	val32 |= 0x00002000;	/* Turn on SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to deactivate watchdog */
+}
+
 static void supermicro_old_pre_keepalive(unsigned long acpibase)
 {
 	/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_start(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_start(heartbeat);
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_stop(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_stop();
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 5b395a4ddfdf..352334947ea3 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
- *	intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ *	intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -63,7 +63,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.04"
+#define DRV_VERSION	"1.05"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
 /* TCO base address */
-#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
 /* SMI Control and Enable Register */
-#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
 
 #define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
-#define	TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
-#define	TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
-#define	TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
+#define TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
+#define TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
+#define TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+#define TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
 #define TCO1_CNT	TCOBASE + 0x08	/* TCO1 Control Register	*/
 #define TCO2_CNT	TCOBASE + 0x0a	/* TCO2 Control Register	*/
 #define TCOv2_TMR	TCOBASE + 0x12	/* TCOv2 Timer Initial Value	*/
@@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 static int iTCO_wdt_start(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -351,11 +350,6 @@ static int iTCO_wdt_start(void)
 		return -EIO;
 	}
 
-	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);
-
 	/* Force the timer to its reload value by writing to the TCO_RLD
 	   register */
 	if (iTCO_wdt_private.iTCO_version == 2)
@@ -378,7 +372,6 @@ static int iTCO_wdt_start(void)
 static int iTCO_wdt_stop(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void)
 	outw(val, TCO1_CNT);
 	val = inw(TCO1_CNT);
 
-	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
-	val32 = inl(SMI_EN);
-	val32 |= 0x00002000;
-	outl(val32, SMI_EN);
-
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit();
 
@@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	int ret;
 	u32 base_address;
 	unsigned long RCBA;
+	unsigned long val32;
 
 	/*
 	 *      Find the ACPI/PM base I/O address which is the base
@@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		ret = -EIO;
 		goto out;
 	}
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);
 
 	/* The TCO I/O registers reside in a 32-byte range pointed to
 	   by the TCOBASE value */
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index e7e83b65c18f..3ccd348d112d 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -45,6 +45,13 @@ static int xen_suspend(void *data)
 		       err);
 		return err;
 	}
+	err = sysdev_suspend(PMSG_SUSPEND);
+	if (err) {
+		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
+			err);
+		device_power_up(PMSG_RESUME);
+		return err;
+	}
 
 	xen_mm_pin_all();
 	gnttab_suspend();
@@ -61,6 +68,7 @@ static int xen_suspend(void *data)
 	gnttab_resume();
 	xen_mm_unpin_all();
 
+	sysdev_resume();
 	device_power_up(PMSG_RESUME);
 
 	if (!*cancelled) {
author	Ingo Molnar <mingo@elte.hu>	2009-02-22 22:05:19 +0300
committer	Ingo Molnar <mingo@elte.hu>	2009-02-22 22:05:19 +0300
commit	fc6fc7f1b1095b92d4834e69b385b91e412a7ce5 (patch)
tree	2ad451d5dac4d460830536944cef1de93be36b2a /drivers
parent	ef1f87aa7ba6224bef1b750b3272ba281d8f43ed (diff)
parent	770824bdc421ff58a64db608294323571c949f4c (diff)
download	linux-fc6fc7f1b1095b92d4834e69b385b91e412a7ce5.tar.xz