Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...

12 files changed, 386 insertions, 38 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 52e9329e3c51..96918e1f26a3 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -188,3 +188,6 @@ config EM_TIMER_STI
 	  This enables build of a clocksource and clockevent driver for
 	  the 48-bit System Timer (STI) hardware available on a SoCs
 	  such as EMEV2 from former NEC Electronics.
+
+config CLKSRC_QCOM
+	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f3fe4cb4974b..98cb6c51aa87 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
+obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index c2e390efbdca..a6ee6d7cd63f 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -25,8 +25,6 @@
 #include <linux/of_address.h>
 #include <linux/clocksource.h>
 
-#include <asm/mach/time.h>
-
 #define EXYNOS4_MCTREG(x)		(x)
 #define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
 #define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
new file mode 100644
index 000000000000..e807acf4c665
--- /dev/null
+++ b/drivers/clocksource/qcom-timer.c
@@ -0,0 +1,330 @@
+/*
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define TIMER_MATCH_VAL			0x0000
+#define TIMER_COUNT_VAL			0x0004
+#define TIMER_ENABLE			0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN	BIT(1)
+#define TIMER_ENABLE_EN			BIT(0)
+#define TIMER_CLEAR			0x000C
+#define DGT_CLK_CTL			0x10
+#define DGT_CLK_CTL_DIV_4		0x3
+#define TIMER_STS_GPT0_CLR_PEND		BIT(10)
+
+#define GPT_HZ 32768
+
+#define MSM_DGT_SHIFT 5
+
+static void __iomem *event_base;
+static void __iomem *sts_base;
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	/* Stop the timer tick */
+	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
+		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+		ctrl &= ~TIMER_ENABLE_EN;
+		writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+	}
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
+{
+	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+
+	ctrl &= ~TIMER_ENABLE_EN;
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
+	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
+
+	if (sts_base)
+		while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
+			cpu_relax();
+
+	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
+	return 0;
+}
+
+static void msm_timer_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	u32 ctrl;
+
+	ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+	ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Timer is enabled in set_next_event */
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	}
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+}
+
+static struct clock_event_device __percpu *msm_evt;
+
+static void __iomem *source_base;
+
+static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
+{
+	return readl_relaxed(source_base + TIMER_COUNT_VAL);
+}
+
+static struct clocksource msm_clocksource = {
+	.name	= "dg_timer",
+	.rating	= 300,
+	.read	= msm_read_timer_count,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int msm_timer_irq;
+static int msm_timer_has_ppi;
+
+static int msm_local_timer_setup(struct clock_event_device *evt)
+{
+	int cpu = smp_processor_id();
+	int err;
+
+	evt->irq = msm_timer_irq;
+	evt->name = "msm_timer";
+	evt->features = CLOCK_EVT_FEAT_ONESHOT;
+	evt->rating = 200;
+	evt->set_mode = msm_timer_set_mode;
+	evt->set_next_event = msm_timer_set_next_event;
+	evt->cpumask = cpumask_of(cpu);
+
+	clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
+
+	if (msm_timer_has_ppi) {
+		enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
+	} else {
+		err = request_irq(evt->irq, msm_timer_interrupt,
+				IRQF_TIMER | IRQF_NOBALANCING |
+				IRQF_TRIGGER_RISING, "gp_timer", evt);
+		if (err)
+			pr_err("request_irq failed\n");
+	}
+
+	return 0;
+}
+
+static void msm_local_timer_stop(struct clock_event_device *evt)
+{
+	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	disable_percpu_irq(evt->irq);
+}
+
+static int msm_timer_cpu_notify(struct notifier_block *self,
+					   unsigned long action, void *hcpu)
+{
+	/*
+	 * Grab cpu pointer in each case to avoid spurious
+	 * preemptible warnings
+	 */
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		msm_local_timer_setup(this_cpu_ptr(msm_evt));
+		break;
+	case CPU_DYING:
+		msm_local_timer_stop(this_cpu_ptr(msm_evt));
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block msm_timer_cpu_nb = {
+	.notifier_call = msm_timer_cpu_notify,
+};
+
+static u64 notrace msm_sched_clock_read(void)
+{
+	return msm_clocksource.read(&msm_clocksource);
+}
+
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+				  bool percpu)
+{
+	struct clocksource *cs = &msm_clocksource;
+	int res = 0;
+
+	msm_timer_irq = irq;
+	msm_timer_has_ppi = percpu;
+
+	msm_evt = alloc_percpu(struct clock_event_device);
+	if (!msm_evt) {
+		pr_err("memory allocation failed for clockevents\n");
+		goto err;
+	}
+
+	if (percpu)
+		res = request_percpu_irq(irq, msm_timer_interrupt,
+					 "gp_timer", msm_evt);
+
+	if (res) {
+		pr_err("request_percpu_irq failed\n");
+	} else {
+		res = register_cpu_notifier(&msm_timer_cpu_nb);
+		if (res) {
+			free_percpu_irq(irq, msm_evt);
+			goto err;
+		}
+
+		/* Immediately configure the timer on the boot CPU */
+		msm_local_timer_setup(__this_cpu_ptr(msm_evt));
+	}
+
+err:
+	writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
+	res = clocksource_register_hz(cs, dgt_hz);
+	if (res)
+		pr_err("clocksource_register failed\n");
+	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
+}
+
+#ifdef CONFIG_ARCH_QCOM
+static void __init msm_dt_timer_init(struct device_node *np)
+{
+	u32 freq;
+	int irq;
+	struct resource res;
+	u32 percpu_offset;
+	void __iomem *base;
+	void __iomem *cpu0_base;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("Failed to map event base\n");
+		return;
+	}
+
+	/* We use GPT0 for the clockevent */
+	irq = irq_of_parse_and_map(np, 1);
+	if (irq <= 0) {
+		pr_err("Can't get irq\n");
+		return;
+	}
+
+	/* We use CPU0's DGT for the clocksource */
+	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("Failed to parse DGT resource\n");
+		return;
+	}
+
+	cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
+	if (!cpu0_base) {
+		pr_err("Failed to map source base\n");
+		return;
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", &freq)) {
+		pr_err("Unknown frequency\n");
+		return;
+	}
+
+	event_base = base + 0x4;
+	sts_base = base + 0x88;
+	source_base = cpu0_base + 0x24;
+	freq /= 4;
+	writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
+
+	msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
+#else
+
+static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
+				u32 sts)
+{
+	void __iomem *base;
+
+	base = ioremap(addr, SZ_256);
+	if (!base) {
+		pr_err("Failed to map timer base\n");
+		return -ENOMEM;
+	}
+	event_base = base + event;
+	source_base = base + source;
+	if (sts)
+		sts_base = base + sts;
+
+	return 0;
+}
+
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+	/*
+	 * Shift timer count down by a constant due to unreliable lower bits
+	 * on some targets.
+	 */
+	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
+void __init msm7x01_timer_init(void)
+{
+	struct clocksource *cs = &msm_clocksource;
+
+	if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
+		return;
+	cs->read = msm_read_timer_count_shift;
+	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+	/* 600 KHz */
+	msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+			false);
+}
+
+void __init msm7x30_timer_init(void)
+{
+	if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
+		return;
+	msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+void __init qsd8x50_timer_init(void)
+{
+	if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
+		return;
+	msm_timer_init(19200000 / 4, 32, 7, false);
+}
+#endif
diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 09a17d9a6594..b52e1c078b99 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -19,7 +19,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/sched_clock.h>
-#include <asm/mach/time.h>
+
+#define MARCO_CLOCK_FREQ 1000000
 
 #define SIRFSOC_TIMER_32COUNTER_0_CTRL			0x0000
 #define SIRFSOC_TIMER_32COUNTER_1_CTRL			0x0004
@@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce)
 	ce->rating = 200;
 	ce->set_mode = sirfsoc_timer_set_mode;
 	ce->set_next_event = sirfsoc_timer_set_next_event;
-	clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60);
+	clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60);
 	ce->max_delta_ns = clockevent_delta2ns(-2, ce);
 	ce->min_delta_ns = clockevent_delta2ns(2, ce);
 	ce->cpumask = cpumask_of(cpu);
@@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void)
 	BUG_ON(IS_ERR(clk));
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
+	BUG_ON(rate < MARCO_CLOCK_FREQ);
+	BUG_ON(rate % MARCO_CLOCK_FREQ);
 
 	/* Initialize the timer dividers */
-	timer_div = rate / CLOCK_TICK_RATE - 1;
+	timer_div = rate / MARCO_CLOCK_FREQ - 1;
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
@@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void)
 	/* Clear all interrupts */
 	writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ));
 
 	sirfsoc_clockevent_init();
 }
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 8a492d34ff9f..1a6b2d6356d6 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -21,6 +21,8 @@
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
+#define PRIMA2_CLOCK_FREQ 1000000
+
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
 #define SIRFSOC_TIMER_COUNTER_HI	0x0004
 #define SIRFSOC_TIMER_MATCH_0		0x0008
@@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void)
 static void __init sirfsoc_clockevent_init(void)
 {
 	sirfsoc_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+	clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ,
 					2, -2);
 }
 
@@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
+	BUG_ON(rate < PRIMA2_CLOCK_FREQ);
+	BUG_ON(rate % PRIMA2_CLOCK_FREQ);
 
 	sirfsoc_timer_base = of_iomap(np, 0);
 	if (!sirfsoc_timer_base)
@@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
 
-	writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
+	writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
+		       sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
 	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
+				       PRIMA2_CLOCK_FREQ));
 
-	sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
+	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
 	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
 
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 17ccba88d636..ed8e5e8449d3 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -67,7 +67,7 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned
 	}
 
 	if (value > 20 && value < 32767)
-		count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1;
+		count = (ixp4xx_timer_freq / (value * 4)) - 1;
 
 	ixp4xx_spkr_control(pin, count);
 
diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
index 40e6440348ff..f8636a650cf6 100644
--- a/drivers/irqchip/exynos-combiner.c
+++ b/drivers/irqchip/exynos-combiner.c
@@ -17,7 +17,6 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <asm/mach/irq.h>
 
 #include "irqchip.h"
 
@@ -81,7 +80,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	cascade_irq = irq_find_mapping(combiner_irq_domain, combiner_irq);
 
 	if (unlikely(!cascade_irq))
-		do_bad_IRQ(irq, desc);
+		handle_bad_irq(irq, desc);
 	else
 		generic_handle_irq(cascade_irq);
 
diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 3c8827fe83f3..1c3e2c9b46ba 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -22,7 +22,7 @@
 #include <linux/of_irq.h>
 
 #include <asm/exception.h>
-#include <asm/mach/irq.h>
+#include <asm/hardirq.h>
 
 #include "irqchip.h"
 
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 309b8b342d9c..596374304532 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -24,7 +24,7 @@
 
 #include <mach/at91_rtt.h>
 #include <mach/cpu.h>
-
+#include <mach/hardware.h>
 
 /*
  * This driver uses two configurable hardware resources that live in the
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index a355f2b82bb8..cccbf9d89729 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -32,7 +32,6 @@
 
 #include <mach/hardware.h>
 
-#define TIMER_FREQ		CLOCK_TICK_RATE
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
 #define MAXFREQ_PERIODIC	1000
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b0603e1f7d82..53eeea13ff16 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -35,21 +35,18 @@
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/dma-mapping.h>
 #include <linux/atmel_pdc.h>
 #include <linux/atmel_serial.h>
 #include <linux/uaccess.h>
 #include <linux/platform_data/atmel.h>
 #include <linux/timer.h>
+#include <linux/gpio.h>
 
 #include <asm/io.h>
 #include <asm/ioctls.h>
 
-#ifdef CONFIG_ARM
-#include <mach/cpu.h>
-#include <asm/gpio.h>
-#endif
-
 #define PDC_BUFFER_SIZE		512
 /* Revisit: We should calculate this based on the actual port settings */
 #define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
@@ -165,6 +162,7 @@ struct atmel_uart_port {
 	struct circ_buf		rx_ring;
 
 	struct serial_rs485	rs485;		/* rs485 settings */
+	int			rts_gpio;	/* optional RTS GPIO */
 	unsigned int		tx_done_mask;
 	bool			is_usart;	/* usart or uart */
 	struct timer_list	uart_timer;	/* uart timer */
@@ -298,20 +296,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 	unsigned int mode;
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-#ifdef CONFIG_ARCH_AT91RM9200
-	if (cpu_is_at91rm9200()) {
-		/*
-		 * AT91RM9200 Errata #39: RTS0 is not internally connected
-		 * to PA21. We need to drive the pin manually.
-		 */
-		if (port->mapbase == AT91RM9200_BASE_US0) {
-			if (mctrl & TIOCM_RTS)
-				at91_set_gpio_value(AT91_PIN_PA21, 0);
-			else
-				at91_set_gpio_value(AT91_PIN_PA21, 1);
-		}
+	/*
+	 * AT91RM9200 Errata #39: RTS0 is not internally connected
+	 * to PA21. We need to drive the pin as a GPIO.
+	 */
+	if (gpio_is_valid(atmel_port->rts_gpio)) {
+		if (mctrl & TIOCM_RTS)
+			gpio_set_value(atmel_port->rts_gpio, 0);
+		else
+			gpio_set_value(atmel_port->rts_gpio, 1);
 	}
-#endif
 
 	if (mctrl & TIOCM_RTS)
 		control |= ATMEL_US_RTSEN;
@@ -2365,6 +2359,25 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	port = &atmel_ports[ret];
 	port->backup_imr = 0;
 	port->uart.line = ret;
+	port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
+	if (pdata)
+		port->rts_gpio = pdata->rts_gpio;
+	else if (np)
+		port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
+
+	if (gpio_is_valid(port->rts_gpio)) {
+		ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
+		if (ret) {
+			dev_err(&pdev->dev, "error requesting RTS GPIO\n");
+			goto err;
+		}
+		/* Default to 1 as RTS is active low */
+		ret = gpio_direction_output(port->rts_gpio, 1);
+		if (ret) {
+			dev_err(&pdev->dev, "error setting up RTS GPIO\n");
+			goto err;
+		}
+	}
 
 	ret = atmel_init_port(port, pdev);
 	if (ret)