Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris: - A few SPI NOR ID definitions - Kill the NAND "max pagesize" restriction - Fix some x16 bus-width NAND support - Add NAND JEDEC parameter page support - DT bindings for NAND ECC - GPMI NAND updates (subpage reads) - More OMAP NAND refactoring - New STMicro SPI NOR driver (now in 40 patches!) - A few other random bugfixes * tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits) Fix index regression in nand_read_subpage mtd: diskonchip: mem resource name is not optional mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH mtd: nand: fix GET/SET_FEATURES address on 16-bit devices mtd: omap2: Use devm_ioremap_resource() mtd: denali_dt: Use devm_ioremap_resource() mtd: devices: elm: update DRIVER_NAME as "omap-elm" mtd: devices: elm: configure parallel channels based on ecc_steps mtd: devices: elm: clean elm_load_syndrome mtd: devices: elm: check for hardware engine's design constraints mtd: st_spi_fsm: Succinctly reorganise .remove() mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M" mtd: st_spi_fsm: Avoid duplicating MTD core code mtd: st_spi_fsm: Remove useless consts from function arguments mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2014-04-07 21:17:30 +0400
committer: Linus Torvalds <torvalds@linux-foundation.org> 2014-04-07 21:17:30 +0400
commit: c29aa153ef0469cddf0146d41ce6494bd76be78b (patch)
tree: b49af4e6cf54e9988dd45640a86c4de7f49ddf6d /drivers
parent: 2b3a8fd735f86ebeb2b9d061054003000c36b654 (diff)
parent: 4a4163caccae97a23d97c29032664ee7b7a498d0 (diff)
download: linux-c29aa153ef0469cddf0146d41ce6494bd76be78b.tar.xz
72 files changed, 2975 insertions, 603 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 5ebcda39f554..5d49a2129618 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -150,7 +150,7 @@ config MTD_BCM63XX_PARTS
 
 config MTD_BCM47XX_PARTS
 	tristate "BCM47XX partitioning support"
-	depends on BCM47XX
+	depends on BCM47XX || ARCH_BCM_5301X
 	help
 	  This provides partitions parser for devices based on BCM47xx
 	  boards.
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index de1eb92e42f5..adfa74c1bc45 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <bcm47xx_nvram.h>
 
 /* 10 parts were found on sflash on Netgear WNDR4500 */
 #define BCM47XXPART_MAX_PARTS		12
@@ -30,6 +29,7 @@
 #define BOARD_DATA_MAGIC2		0xBD0D0BBD
 #define CFE_MAGIC			0x43464531	/* 1EFC */
 #define FACTORY_MAGIC			0x59544346	/* FCTY */
+#define NVRAM_HEADER			0x48534C46	/* FLSH */
 #define POT_MAGIC1			0x54544f50	/* POTT */
 #define POT_MAGIC2			0x504f		/* OP */
 #define ML_MAGIC1			0x39685a42
@@ -91,7 +91,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 		if (offset >= 0x2000000)
 			break;
 
-		if (curr_part > BCM47XXPART_MAX_PARTS) {
+		if (curr_part >= BCM47XXPART_MAX_PARTS) {
 			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
 			break;
 		}
@@ -147,6 +147,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 
 		/* TRX */
 		if (buf[0x000 / 4] == TRX_MAGIC) {
+			if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
+				pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
+				break;
+			}
+
 			trx = (struct trx_header *)buf;
 
 			trx_part = curr_part;
@@ -212,7 +217,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 
 	/* Look for NVRAM at the end of the last block. */
 	for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
-		if (curr_part > BCM47XXPART_MAX_PARTS) {
+		if (curr_part >= BCM47XXPART_MAX_PARTS) {
 			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
 			break;
 		}
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 77514430f1fe..e4ec355704a6 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -21,7 +21,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -69,10 +68,10 @@ static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, s
 static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t);
-static int cfi_intelext_get_fact_prot_info (struct mtd_info *,
-					    struct otp_info *, size_t);
-static int cfi_intelext_get_user_prot_info (struct mtd_info *,
-					    struct otp_info *, size_t);
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *, size_t,
+					   size_t *, struct otp_info *);
+static int cfi_intelext_get_user_prot_info(struct mtd_info *, size_t,
+					   size_t *, struct otp_info *);
 #endif
 static int cfi_intelext_suspend (struct mtd_info *);
 static void cfi_intelext_resume (struct mtd_info *);
@@ -435,10 +434,8 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	int i;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
@@ -564,10 +561,8 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 			* mtd->numeraseregions, GFP_KERNEL);
-	if (!mtd->eraseregions) {
-		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
+	if (!mtd->eraseregions)
 		goto setup_err;
-	}
 
 	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 		unsigned long ernum, ersize;
@@ -2399,24 +2394,19 @@ static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd,
 				     NULL, do_otp_lock, 1);
 }
 
-static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd,
-					   struct otp_info *buf, size_t len)
-{
-	size_t retlen;
-	int ret;
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+					   size_t *retlen, struct otp_info *buf)
 
-	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 0);
-	return ret ? : retlen;
+{
+	return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf,
+				     NULL, 0);
 }
 
-static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd,
-					   struct otp_info *buf, size_t len)
+static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, size_t len,
+					   size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 1);
-	return ret ? : retlen;
+	return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf,
+				     NULL, 1);
 }
 
 #endif
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 89b9d6891532..e21fde9d4d7e 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -24,7 +24,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -507,10 +506,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 	int i;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_WARNING "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
@@ -661,10 +658,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 				    * mtd->numeraseregions, GFP_KERNEL);
-	if (!mtd->eraseregions) {
-		printk(KERN_WARNING "Failed to allocate memory for MTD erase region info\n");
+	if (!mtd->eraseregions)
 		goto setup_err;
-	}
 
 	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 		unsigned long ernum, ersize;
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 096993f9711e..6293855fb5ee 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -22,7 +22,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -176,7 +175,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 	//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
 
 	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
 		kfree(cfi->cmdset_priv);
 		return NULL;
 	}
@@ -189,7 +187,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 			* mtd->numeraseregions, GFP_KERNEL);
 	if (!mtd->eraseregions) {
-		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
 		kfree(cfi->cmdset_priv);
 		kfree(mtd);
 		return NULL;
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index d25535279404..e8d0164498b0 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -168,10 +168,8 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 		return 0;
 
 	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
-	if (!cfi->cfiq) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
+	if (!cfi->cfiq)
 		return 0;
-	}
 
 	memset(cfi->cfiq,0,sizeof(struct cfi_ident));
 
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index f992418f40a8..08049f6eea60 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -116,10 +116,8 @@ __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* n
 	printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr);
 
 	extp = kmalloc(size, GFP_KERNEL);
-	if (!extp) {
-		printk(KERN_ERR "Failed to allocate memory\n");
+	if (!extp)
 		goto out;
-	}
 
 #ifdef CONFIG_MTD_XIP
 	local_irq_disable();
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index ffb36ba8a6e0..b57ceea21513 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -114,7 +114,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG);
 	chip_map = kzalloc(mapsize, GFP_KERNEL);
 	if (!chip_map) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
 		kfree(cfi.cfiq);
 		return NULL;
 	}
@@ -139,7 +138,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL);
 
 	if (!retcfi) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name);
 		kfree(cfi.cfiq);
 		kfree(chip_map);
 		return NULL;
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 01281382180b..1210bc2923b7 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -210,6 +210,14 @@ config MTD_DOCG3
 	  M-Systems and now Sandisk. The support is very experimental,
 	  and doesn't give access to any write operations.
 
+config MTD_ST_SPI_FSM
+	tristate "ST Microelectronics SPI FSM Serial Flash Controller"
+	depends on ARM || SH
+	help
+	  This provides an MTD device driver for the ST Microelectronics
+	  SPI Fast Sequence Mode (FSM) Serial Flash Controller and support
+	  for a subset of connected Serial Flash devices.
+
 if MTD_DOCG3
 config BCH_CONST_M
 	default 14
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index d83bd73096f6..c68868f60588 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_NAND_OMAP_BCH)	+= elm.o
 obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
 obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
+obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
 
 
 CFLAGS_docg3.o			+= -I$(src)
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index d9fd87a4c8dc..66f0405f7e53 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -209,7 +209,6 @@ static void block2mtd_free_device(struct block2mtd_dev *dev)
 }
 
 
-/* FIXME: ensure that mtd->size % erase_size == 0 */
 static struct block2mtd_dev *add_device(char *devname, int erase_size)
 {
 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
@@ -240,13 +239,18 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 
 	if (IS_ERR(bdev)) {
 		pr_err("error: cannot open device %s\n", devname);
-		goto devinit_err;
+		goto err_free_block2mtd;
 	}
 	dev->blkdev = bdev;
 
 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
 		pr_err("attempting to use an MTD device as a block device\n");
-		goto devinit_err;
+		goto err_free_block2mtd;
+	}
+
+	if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
+		pr_err("erasesize must be a divisor of device size\n");
+		goto err_free_block2mtd;
 	}
 
 	mutex_init(&dev->write_mutex);
@@ -255,7 +259,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 	/* make the name contain the block device in */
 	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
 	if (!name)
-		goto devinit_err;
+		goto err_destroy_mutex;
 
 	dev->mtd.name = name;
 
@@ -274,7 +278,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 
 	if (mtd_device_register(&dev->mtd, NULL, 0)) {
 		/* Device didn't get added, so free the entry */
-		goto devinit_err;
+		goto err_destroy_mutex;
 	}
 	list_add(&dev->list, &blkmtd_device_list);
 	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
@@ -283,7 +287,9 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
 	return dev;
 
-devinit_err:
+err_destroy_mutex:
+	mutex_destroy(&dev->write_mutex);
+err_free_block2mtd:
 	block2mtd_free_device(dev);
 	return NULL;
 }
@@ -448,6 +454,7 @@ static void block2mtd_exit(void)
 		struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
 		block2mtd_sync(&dev->mtd);
 		mtd_device_unregister(&dev->mtd);
+		mutex_destroy(&dev->write_mutex);
 		pr_info("mtd%d: [%s] removed\n",
 			dev->mtd.index,
 			dev->mtd.name + strlen("block2mtd: "));
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index d1dd6a33a050..1fd4a0f77967 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define DRIVER_NAME	"omap-elm"
+
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -84,6 +86,8 @@ struct elm_info {
 	struct list_head list;
 	enum bch_ecc bch_type;
 	struct elm_registers elm_regs;
+	int ecc_steps;
+	int ecc_syndrome_size;
 };
 
 static LIST_HEAD(elm_devices);
@@ -103,7 +107,8 @@ static u32 elm_read_reg(struct elm_info *info, int offset)
  * @dev:	ELM device
  * @bch_type:	Type of BCH ecc
  */
-int elm_config(struct device *dev, enum bch_ecc bch_type)
+int elm_config(struct device *dev, enum bch_ecc bch_type,
+	int ecc_steps, int ecc_step_size, int ecc_syndrome_size)
 {
 	u32 reg_val;
 	struct elm_info *info = dev_get_drvdata(dev);
@@ -112,10 +117,22 @@ int elm_config(struct device *dev, enum bch_ecc bch_type)
 		dev_err(dev, "Unable to configure elm - device not probed?\n");
 		return -ENODEV;
 	}
+	/* ELM cannot detect ECC errors for chunks > 1KB */
+	if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) {
+		dev_err(dev, "unsupported config ecc-size=%d\n", ecc_step_size);
+		return -EINVAL;
+	}
+	/* ELM support 8 error syndrome process */
+	if (ecc_steps > ERROR_VECTOR_MAX) {
+		dev_err(dev, "unsupported config ecc-step=%d\n", ecc_steps);
+		return -EINVAL;
+	}
 
 	reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
 	elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
-	info->bch_type = bch_type;
+	info->bch_type		= bch_type;
+	info->ecc_steps		= ecc_steps;
+	info->ecc_syndrome_size	= ecc_syndrome_size;
 
 	return 0;
 }
@@ -157,17 +174,15 @@ static void elm_load_syndrome(struct elm_info *info,
 	int i, offset;
 	u32 val;
 
-	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+	for (i = 0; i < info->ecc_steps; i++) {
 
 		/* Check error reported */
 		if (err_vec[i].error_reported) {
 			elm_configure_page_mode(info, i, true);
 			offset = ELM_SYNDROME_FRAGMENT_0 +
 				SYNDROME_FRAGMENT_REG_SIZE * i;
-
-			/* BCH8 */
-			if (info->bch_type) {
-
+			switch (info->bch_type) {
+			case BCH8_ECC:
 				/* syndrome fragment 0 = ecc[9-12B] */
 				val = cpu_to_be32(*(u32 *) &ecc[9]);
 				elm_write_reg(info, offset, val);
@@ -186,7 +201,8 @@ static void elm_load_syndrome(struct elm_info *info,
 				offset += 4;
 				val = ecc[0];
 				elm_write_reg(info, offset, val);
-			} else {
+				break;
+			case BCH4_ECC:
 				/* syndrome fragment 0 = ecc[20-52b] bits */
 				val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) |
 					((ecc[2] & 0xf) << 28);
@@ -196,11 +212,14 @@ static void elm_load_syndrome(struct elm_info *info,
 				offset += 4;
 				val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12;
 				elm_write_reg(info, offset, val);
+				break;
+			default:
+				pr_err("invalid config bch_type\n");
 			}
 		}
 
 		/* Update ecc pointer with ecc byte size */
-		ecc += info->bch_type ? BCH8_SIZE : BCH4_SIZE;
+		ecc += info->ecc_syndrome_size;
 	}
 }
 
@@ -223,7 +242,7 @@ static void elm_start_processing(struct elm_info *info,
 	 * Set syndrome vector valid, so that ELM module
 	 * will process it for vectors error is reported
 	 */
-	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+	for (i = 0; i < info->ecc_steps; i++) {
 		if (err_vec[i].error_reported) {
 			offset = ELM_SYNDROME_FRAGMENT_6 +
 				SYNDROME_FRAGMENT_REG_SIZE * i;
@@ -252,7 +271,7 @@ static void elm_error_correction(struct elm_info *info,
 	int offset;
 	u32 reg_val;
 
-	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+	for (i = 0; i < info->ecc_steps; i++) {
 
 		/* Check error reported */
 		if (err_vec[i].error_reported) {
@@ -354,10 +373,8 @@ static int elm_probe(struct platform_device *pdev)
 	struct elm_info *info;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!info)
 		return -ENOMEM;
-	}
 
 	info->dev = &pdev->dev;
 
@@ -380,7 +397,7 @@ static int elm_probe(struct platform_device *pdev)
 	}
 
 	pm_runtime_enable(&pdev->dev);
-	if (pm_runtime_get_sync(&pdev->dev)) {
+	if (pm_runtime_get_sync(&pdev->dev) < 0) {
 		ret = -EINVAL;
 		pm_runtime_disable(&pdev->dev);
 		dev_err(&pdev->dev, "can't enable clock\n");
@@ -505,7 +522,7 @@ MODULE_DEVICE_TABLE(of, elm_of_match);
 
 static struct platform_driver elm_driver = {
 	.driver	= {
-		.name	= "elm",
+		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(elm_of_match),
 		.pm	= &elm_pm_ops,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index ad1913909702..524dab3ac938 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -15,7 +15,6 @@
  *
  */
 
-#include <linux/init.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/module.h>
@@ -41,7 +40,8 @@
 #define	OPCODE_WRSR		0x01	/* Write status register 1 byte */
 #define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
 #define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
-#define	OPCODE_QUAD_READ        0x6b    /* Read data bytes */
+#define	OPCODE_DUAL_READ        0x3b    /* Read data bytes (Dual SPI) */
+#define	OPCODE_QUAD_READ        0x6b    /* Read data bytes (Quad SPI) */
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
 #define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */
 #define	OPCODE_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
@@ -54,7 +54,8 @@
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
 #define	OPCODE_NORM_READ_4B	0x13	/* Read data bytes (low frequency) */
 #define	OPCODE_FAST_READ_4B	0x0c	/* Read data bytes (high frequency) */
-#define	OPCODE_QUAD_READ_4B	0x6c    /* Read data bytes */
+#define	OPCODE_DUAL_READ_4B	0x3c    /* Read data bytes (Dual SPI) */
+#define	OPCODE_QUAD_READ_4B	0x6c    /* Read data bytes (Quad SPI) */
 #define	OPCODE_PP_4B		0x12	/* Page program (up to 256 bytes) */
 #define	OPCODE_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
 
@@ -95,6 +96,7 @@
 enum read_type {
 	M25P80_NORMAL = 0,
 	M25P80_FAST,
+	M25P80_DUAL,
 	M25P80_QUAD,
 };
 
@@ -479,6 +481,7 @@ static inline int m25p80_dummy_cycles_read(struct m25p *flash)
 {
 	switch (flash->flash_read) {
 	case M25P80_FAST:
+	case M25P80_DUAL:
 	case M25P80_QUAD:
 		return 1;
 	case M25P80_NORMAL:
@@ -492,6 +495,8 @@ static inline int m25p80_dummy_cycles_read(struct m25p *flash)
 static inline unsigned int m25p80_rx_nbits(const struct m25p *flash)
 {
 	switch (flash->flash_read) {
+	case M25P80_DUAL:
+		return 2;
 	case M25P80_QUAD:
 		return 4;
 	default:
@@ -855,7 +860,8 @@ struct flash_info {
 #define	SST_WRITE	0x04		/* use SST byte programming */
 #define	M25P_NO_FR	0x08		/* Can't do fastread */
 #define	SECT_4K_PMC	0x10		/* OPCODE_BE_4K_PMC works uniformly */
-#define	M25P80_QUAD_READ	0x20    /* Flash supports Quad Read */
+#define	M25P80_DUAL_READ	0x20    /* Flash supports Dual Read */
+#define	M25P80_QUAD_READ	0x40    /* Flash supports Quad Read */
 };
 
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
@@ -934,6 +940,7 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, M25P80_QUAD_READ) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, M25P80_QUAD_READ) },
 
 	/* Micron */
 	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
@@ -953,8 +960,8 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, 0) },
 	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, 0) },
 	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
-	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, M25P80_QUAD_READ) },
-	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_QUAD_READ) },
+	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, M25P80_DUAL_READ | M25P80_QUAD_READ) },
+	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_DUAL_READ | M25P80_QUAD_READ) },
 	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
 	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
 	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
@@ -965,6 +972,7 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
 	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
 	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
+	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K) },
 	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K) },
 	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
 
@@ -1072,9 +1080,8 @@ static const struct spi_device_id *jedec_probe(struct spi_device *spi)
 	for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
 		info = (void *)m25p_ids[tmp].driver_data;
 		if (info->jedec_id == jedec) {
-			if (info->ext_id != 0 && info->ext_id != ext_jedec)
-				continue;
-			return &m25p_ids[tmp];
+			if (info->ext_id == 0 || info->ext_id == ext_jedec)
+				return &m25p_ids[tmp];
 		}
 	}
 	dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
@@ -1226,7 +1233,7 @@ static int m25p_probe(struct spi_device *spi)
 	if (info->flags & M25P_NO_FR)
 		flash->flash_read = M25P80_NORMAL;
 
-	/* Quad-read mode takes precedence over fast/normal */
+	/* Quad/Dual-read mode takes precedence over fast/normal */
 	if (spi->mode & SPI_RX_QUAD && info->flags & M25P80_QUAD_READ) {
 		ret = set_quad_mode(flash, info->jedec_id);
 		if (ret) {
@@ -1234,6 +1241,8 @@ static int m25p_probe(struct spi_device *spi)
 			return ret;
 		}
 		flash->flash_read = M25P80_QUAD;
+	} else if (spi->mode & SPI_RX_DUAL && info->flags & M25P80_DUAL_READ) {
+		flash->flash_read = M25P80_DUAL;
 	}
 
 	/* Default commands */
@@ -1241,6 +1250,9 @@ static int m25p_probe(struct spi_device *spi)
 	case M25P80_QUAD:
 		flash->read_opcode = OPCODE_QUAD_READ;
 		break;
+	case M25P80_DUAL:
+		flash->read_opcode = OPCODE_DUAL_READ;
+		break;
 	case M25P80_FAST:
 		flash->read_opcode = OPCODE_FAST_READ;
 		break;
@@ -1265,6 +1277,9 @@ static int m25p_probe(struct spi_device *spi)
 			case M25P80_QUAD:
 				flash->read_opcode = OPCODE_QUAD_READ_4B;
 				break;
+			case M25P80_DUAL:
+				flash->read_opcode = OPCODE_DUAL_READ_4B;
+				break;
 			case M25P80_FAST:
 				flash->read_opcode = OPCODE_FAST_READ_4B;
 				break;
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 624069de4f28..dd22ce2cc9ad 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -10,7 +10,6 @@
  * 2 of the License, or (at your option) any later version.
 */
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -440,8 +439,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 #ifdef CONFIG_MTD_DATAFLASH_OTP
 
-static int dataflash_get_otp_info(struct mtd_info *mtd,
-		struct otp_info *info, size_t len)
+static int dataflash_get_otp_info(struct mtd_info *mtd, size_t len,
+				  size_t *retlen, struct otp_info *info)
 {
 	/* Report both blocks as identical:  bytes 0..64, locked.
 	 * Unless the user block changed from all-ones, we can't
@@ -450,7 +449,8 @@ static int dataflash_get_otp_info(struct mtd_info *mtd,
 	info->start = 0;
 	info->length = 64;
 	info->locked = 1;
-	return sizeof(*info);
+	*retlen = sizeof(*info);
+	return 0;
 }
 
 static ssize_t otp_read(struct spi_device *spi, unsigned base,
@@ -542,14 +542,18 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
 	struct dataflash	*priv = mtd->priv;
 	int			status;
 
-	if (len > 64)
-		return -EINVAL;
+	if (from >= 64) {
+		/*
+		 * Attempting to write beyond the end of OTP memory,
+		 * no data can be written.
+		 */
+		*retlen = 0;
+		return 0;
+	}
 
-	/* Strictly speaking, we *could* truncate the write ... but
-	 * let's not do that for the only write that's ever possible.
-	 */
+	/* Truncate the write to fit into OTP memory. */
 	if ((from + len) > 64)
-		return -EINVAL;
+		len = 64 - from;
 
 	/* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes
 	 * IN:  ignore all
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index e1f2aebaa489..2cceebfb251e 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -205,6 +205,8 @@ static inline void kill_final_newline(char *str)
 	return 1;		\
 } while (0)
 
+#ifndef MODULE
+static int phram_init_called;
 /*
  * This shall contain the module parameter if any. It is of the form:
  * - phram=<device>,<address>,<size> for module case
@@ -213,9 +215,10 @@ static inline void kill_final_newline(char *str)
  * size.
  * Example: phram.phram=rootfs,0xa0000000,512Mi
  */
-static __initdata char phram_paramline[64 + 20 + 20];
+static char phram_paramline[64 + 20 + 20];
+#endif
 
-static int __init phram_setup(const char *val)
+static int phram_setup(const char *val)
 {
 	char buf[64 + 20 + 20], *str = buf;
 	char *token[3];
@@ -264,17 +267,36 @@ static int __init phram_setup(const char *val)
 	return ret;
 }
 
-static int __init phram_param_call(const char *val, struct kernel_param *kp)
+static int phram_param_call(const char *val, struct kernel_param *kp)
 {
+#ifdef MODULE
+	return phram_setup(val);
+#else
 	/*
-	 * This function is always called before 'init_phram()', whether
-	 * built-in or module.
+	 * If more parameters are later passed in via
+	 * /sys/module/phram/parameters/phram
+	 * and init_phram() has already been called,
+	 * we can parse the argument now.
 	 */
+
+	if (phram_init_called)
+		return phram_setup(val);
+
+	/*
+	 * During early boot stage, we only save the parameters
+	 * here. We must parse them later: if the param passed
+	 * from kernel boot command line, phram_param_call() is
+	 * called so early that it is not possible to resolve
+	 * the device (even kmalloc() fails). Defer that work to
+	 * phram_setup().
+	 */
+
 	if (strlen(val) >= sizeof(phram_paramline))
 		return -ENOSPC;
 	strcpy(phram_paramline, val);
 
 	return 0;
+#endif
 }
 
 module_param_call(phram, phram_param_call, NULL, NULL, 000);
@@ -283,10 +305,15 @@ MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\"
 
 static int __init init_phram(void)
 {
+	int ret = 0;
+
+#ifndef MODULE
 	if (phram_paramline[0])
-		return phram_setup(phram_paramline);
+		ret = phram_setup(phram_paramline);
+	phram_init_called = 1;
+#endif
 
-	return 0;
+	return ret;
 }
 
 static void __exit cleanup_phram(void)
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 0c51b988e1f8..f02603e1bfeb 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -725,16 +725,11 @@ static int __init init_pmc551(void)
 		}
 
 		mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-		if (!mtd) {
-			printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
-				"device.\n");
+		if (!mtd)
 			break;
-		}
 
 		priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL);
 		if (!priv) {
-			printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
-				"device.\n");
 			kfree(mtd);
 			break;
 		}
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
new file mode 100644
index 000000000000..4f0c2c7c898e
--- /dev/null
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -0,0 +1,81 @@
+/*
+ * Generic/SFDP Flash Commands and Device Capabilities
+ *
+ * Copyright (C) 2013 Lee Jones <lee.jones@lianro.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MTD_SERIAL_FLASH_CMDS_H
+#define _MTD_SERIAL_FLASH_CMDS_H
+
+/* Generic Flash Commands/OPCODEs */
+#define FLASH_CMD_WREN		0x06
+#define FLASH_CMD_WRDI		0x04
+#define FLASH_CMD_RDID		0x9f
+#define FLASH_CMD_RDSR		0x05
+#define FLASH_CMD_RDSR2		0x35
+#define FLASH_CMD_WRSR		0x01
+#define FLASH_CMD_SE_4K		0x20
+#define FLASH_CMD_SE_32K	0x52
+#define FLASH_CMD_SE		0xd8
+#define FLASH_CMD_CHIPERASE	0xc7
+#define FLASH_CMD_WRVCR		0x81
+#define FLASH_CMD_RDVCR		0x85
+
+/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
+#define FLASH_CMD_READ		0x03	/* READ */
+#define FLASH_CMD_READ_FAST	0x0b	/* FAST READ */
+#define FLASH_CMD_READ_1_1_2	0x3b	/* DUAL OUTPUT READ */
+#define FLASH_CMD_READ_1_2_2	0xbb	/* DUAL I/O READ */
+#define FLASH_CMD_READ_1_1_4	0x6b	/* QUAD OUTPUT READ */
+#define FLASH_CMD_READ_1_4_4	0xeb	/* QUAD I/O READ */
+
+#define FLASH_CMD_WRITE		0x02	/* PAGE PROGRAM */
+#define FLASH_CMD_WRITE_1_1_2	0xa2	/* DUAL INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_2_2	0xd2	/* DUAL INPUT EXT PROGRAM */
+#define FLASH_CMD_WRITE_1_1_4	0x32	/* QUAD INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_4_4	0x12	/* QUAD INPUT EXT PROGRAM */
+
+#define FLASH_CMD_EN4B_ADDR	0xb7	/* Enter 4-byte address mode */
+#define FLASH_CMD_EX4B_ADDR	0xe9	/* Exit 4-byte address mode */
+
+/* READ commands with 32-bit addressing */
+#define FLASH_CMD_READ4		0x13
+#define FLASH_CMD_READ4_FAST	0x0c
+#define FLASH_CMD_READ4_1_1_2	0x3c
+#define FLASH_CMD_READ4_1_2_2	0xbc
+#define FLASH_CMD_READ4_1_1_4	0x6c
+#define FLASH_CMD_READ4_1_4_4	0xec
+
+/* Configuration flags */
+#define FLASH_FLAG_SINGLE	0x000000ff
+#define FLASH_FLAG_READ_WRITE	0x00000001
+#define FLASH_FLAG_READ_FAST	0x00000002
+#define FLASH_FLAG_SE_4K	0x00000004
+#define FLASH_FLAG_SE_32K	0x00000008
+#define FLASH_FLAG_CE		0x00000010
+#define FLASH_FLAG_32BIT_ADDR	0x00000020
+#define FLASH_FLAG_RESET	0x00000040
+#define FLASH_FLAG_DYB_LOCKING	0x00000080
+
+#define FLASH_FLAG_DUAL		0x0000ff00
+#define FLASH_FLAG_READ_1_1_2	0x00000100
+#define FLASH_FLAG_READ_1_2_2	0x00000200
+#define FLASH_FLAG_READ_2_2_2	0x00000400
+#define FLASH_FLAG_WRITE_1_1_2	0x00001000
+#define FLASH_FLAG_WRITE_1_2_2	0x00002000
+#define FLASH_FLAG_WRITE_2_2_2	0x00004000
+
+#define FLASH_FLAG_QUAD		0x00ff0000
+#define FLASH_FLAG_READ_1_1_4	0x00010000
+#define FLASH_FLAG_READ_1_4_4	0x00020000
+#define FLASH_FLAG_READ_4_4_4	0x00040000
+#define FLASH_FLAG_WRITE_1_1_4	0x00100000
+#define FLASH_FLAG_WRITE_1_4_4	0x00200000
+#define FLASH_FLAG_WRITE_4_4_4	0x00400000
+
+#endif /* _MTD_SERIAL_FLASH_CMDS_H */
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 423821412062..363da96e6891 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -913,7 +913,6 @@ static int spear_smi_probe(struct platform_device *pdev)
 	if (np) {
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata) {
-			pr_err("%s: ERROR: no memory", __func__);
 			ret = -ENOMEM;
 			goto err;
 		}
@@ -943,7 +942,6 @@ static int spear_smi_probe(struct platform_device *pdev)
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC);
 	if (!dev) {
 		ret = -ENOMEM;
-		dev_err(&pdev->dev, "mem alloc fail\n");
 		goto err;
 	}
 
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index 687bf27ec850..c63ecbcad0b7 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -15,7 +15,6 @@
  *
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
new file mode 100644
index 000000000000..1957d7c8e185
--- /dev/null
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -0,0 +1,2108 @@
+/*
+ * st_spi_fsm.c	- ST Fast Sequence Mode (FSM) Serial Flash Controller
+ *
+ * Author: Angus Clark <angus.clark@st.com>
+ *
+ * Copyright (C) 2010-2014 STMicroelectronics Limited
+ *
+ * JEDEC probe based on drivers/mtd/devices/m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "serial_flash_cmds.h"
+
+/*
+ * FSM SPI Controller Registers
+ */
+#define SPI_CLOCKDIV			0x0010
+#define SPI_MODESELECT			0x0018
+#define SPI_CONFIGDATA			0x0020
+#define SPI_STA_MODE_CHANGE		0x0028
+#define SPI_FAST_SEQ_TRANSFER_SIZE	0x0100
+#define SPI_FAST_SEQ_ADD1		0x0104
+#define SPI_FAST_SEQ_ADD2		0x0108
+#define SPI_FAST_SEQ_ADD_CFG		0x010c
+#define SPI_FAST_SEQ_OPC1		0x0110
+#define SPI_FAST_SEQ_OPC2		0x0114
+#define SPI_FAST_SEQ_OPC3		0x0118
+#define SPI_FAST_SEQ_OPC4		0x011c
+#define SPI_FAST_SEQ_OPC5		0x0120
+#define SPI_MODE_BITS			0x0124
+#define SPI_DUMMY_BITS			0x0128
+#define SPI_FAST_SEQ_FLASH_STA_DATA	0x012c
+#define SPI_FAST_SEQ_1			0x0130
+#define SPI_FAST_SEQ_2			0x0134
+#define SPI_FAST_SEQ_3			0x0138
+#define SPI_FAST_SEQ_4			0x013c
+#define SPI_FAST_SEQ_CFG		0x0140
+#define SPI_FAST_SEQ_STA		0x0144
+#define SPI_QUAD_BOOT_SEQ_INIT_1	0x0148
+#define SPI_QUAD_BOOT_SEQ_INIT_2	0x014c
+#define SPI_QUAD_BOOT_READ_SEQ_1	0x0150
+#define SPI_QUAD_BOOT_READ_SEQ_2	0x0154
+#define SPI_PROGRAM_ERASE_TIME		0x0158
+#define SPI_MULT_PAGE_REPEAT_SEQ_1	0x015c
+#define SPI_MULT_PAGE_REPEAT_SEQ_2	0x0160
+#define SPI_STATUS_WR_TIME_REG		0x0164
+#define SPI_FAST_SEQ_DATA_REG		0x0300
+
+/*
+ * Register: SPI_MODESELECT
+ */
+#define SPI_MODESELECT_CONTIG		0x01
+#define SPI_MODESELECT_FASTREAD		0x02
+#define SPI_MODESELECT_DUALIO		0x04
+#define SPI_MODESELECT_FSM		0x08
+#define SPI_MODESELECT_QUADBOOT		0x10
+
+/*
+ * Register: SPI_CONFIGDATA
+ */
+#define SPI_CFG_DEVICE_ST		0x1
+#define SPI_CFG_DEVICE_ATMEL		0x4
+#define SPI_CFG_MIN_CS_HIGH(x)		(((x) & 0xfff) << 4)
+#define SPI_CFG_CS_SETUPHOLD(x)		(((x) & 0xff) << 16)
+#define SPI_CFG_DATA_HOLD(x)		(((x) & 0xff) << 24)
+
+#define SPI_CFG_DEFAULT_MIN_CS_HIGH    SPI_CFG_MIN_CS_HIGH(0x0AA)
+#define SPI_CFG_DEFAULT_CS_SETUPHOLD   SPI_CFG_CS_SETUPHOLD(0xA0)
+#define SPI_CFG_DEFAULT_DATA_HOLD      SPI_CFG_DATA_HOLD(0x00)
+
+/*
+ * Register: SPI_FAST_SEQ_TRANSFER_SIZE
+ */
+#define TRANSFER_SIZE(x)		((x) * 8)
+
+/*
+ * Register: SPI_FAST_SEQ_ADD_CFG
+ */
+#define ADR_CFG_CYCLES_ADD1(x)		((x) << 0)
+#define ADR_CFG_PADS_1_ADD1		(0x0 << 6)
+#define ADR_CFG_PADS_2_ADD1		(0x1 << 6)
+#define ADR_CFG_PADS_4_ADD1		(0x3 << 6)
+#define ADR_CFG_CSDEASSERT_ADD1		(1   << 8)
+#define ADR_CFG_CYCLES_ADD2(x)		((x) << (0+16))
+#define ADR_CFG_PADS_1_ADD2		(0x0 << (6+16))
+#define ADR_CFG_PADS_2_ADD2		(0x1 << (6+16))
+#define ADR_CFG_PADS_4_ADD2		(0x3 << (6+16))
+#define ADR_CFG_CSDEASSERT_ADD2		(1   << (8+16))
+
+/*
+ * Register: SPI_FAST_SEQ_n
+ */
+#define SEQ_OPC_OPCODE(x)		((x) << 0)
+#define SEQ_OPC_CYCLES(x)		((x) << 8)
+#define SEQ_OPC_PADS_1			(0x0 << 14)
+#define SEQ_OPC_PADS_2			(0x1 << 14)
+#define SEQ_OPC_PADS_4			(0x3 << 14)
+#define SEQ_OPC_CSDEASSERT		(1   << 16)
+
+/*
+ * Register: SPI_FAST_SEQ_CFG
+ */
+#define SEQ_CFG_STARTSEQ		(1 << 0)
+#define SEQ_CFG_SWRESET			(1 << 5)
+#define SEQ_CFG_CSDEASSERT		(1 << 6)
+#define SEQ_CFG_READNOTWRITE		(1 << 7)
+#define SEQ_CFG_ERASE			(1 << 8)
+#define SEQ_CFG_PADS_1			(0x0 << 16)
+#define SEQ_CFG_PADS_2			(0x1 << 16)
+#define SEQ_CFG_PADS_4			(0x3 << 16)
+
+/*
+ * Register: SPI_MODE_BITS
+ */
+#define MODE_DATA(x)			(x & 0xff)
+#define MODE_CYCLES(x)			((x & 0x3f) << 16)
+#define MODE_PADS_1			(0x0 << 22)
+#define MODE_PADS_2			(0x1 << 22)
+#define MODE_PADS_4			(0x3 << 22)
+#define DUMMY_CSDEASSERT		(1   << 24)
+
+/*
+ * Register: SPI_DUMMY_BITS
+ */
+#define DUMMY_CYCLES(x)			((x & 0x3f) << 16)
+#define DUMMY_PADS_1			(0x0 << 22)
+#define DUMMY_PADS_2			(0x1 << 22)
+#define DUMMY_PADS_4			(0x3 << 22)
+#define DUMMY_CSDEASSERT		(1   << 24)
+
+/*
+ * Register: SPI_FAST_SEQ_FLASH_STA_DATA
+ */
+#define STA_DATA_BYTE1(x)		((x & 0xff) << 0)
+#define STA_DATA_BYTE2(x)		((x & 0xff) << 8)
+#define STA_PADS_1			(0x0 << 16)
+#define STA_PADS_2			(0x1 << 16)
+#define STA_PADS_4			(0x3 << 16)
+#define STA_CSDEASSERT			(0x1 << 20)
+#define STA_RDNOTWR			(0x1 << 21)
+
+/*
+ * FSM SPI Instruction Opcodes
+ */
+#define STFSM_OPC_CMD			0x1
+#define STFSM_OPC_ADD			0x2
+#define STFSM_OPC_STA			0x3
+#define STFSM_OPC_MODE			0x4
+#define STFSM_OPC_DUMMY		0x5
+#define STFSM_OPC_DATA			0x6
+#define STFSM_OPC_WAIT			0x7
+#define STFSM_OPC_JUMP			0x8
+#define STFSM_OPC_GOTO			0x9
+#define STFSM_OPC_STOP			0xF
+
+/*
+ * FSM SPI Instructions (== opcode + operand).
+ */
+#define STFSM_INSTR(cmd, op)		((cmd) | ((op) << 4))
+
+#define STFSM_INST_CMD1			STFSM_INSTR(STFSM_OPC_CMD,	1)
+#define STFSM_INST_CMD2			STFSM_INSTR(STFSM_OPC_CMD,	2)
+#define STFSM_INST_CMD3			STFSM_INSTR(STFSM_OPC_CMD,	3)
+#define STFSM_INST_CMD4			STFSM_INSTR(STFSM_OPC_CMD,	4)
+#define STFSM_INST_CMD5			STFSM_INSTR(STFSM_OPC_CMD,	5)
+#define STFSM_INST_ADD1			STFSM_INSTR(STFSM_OPC_ADD,	1)
+#define STFSM_INST_ADD2			STFSM_INSTR(STFSM_OPC_ADD,	2)
+
+#define STFSM_INST_DATA_WRITE		STFSM_INSTR(STFSM_OPC_DATA,	1)
+#define STFSM_INST_DATA_READ		STFSM_INSTR(STFSM_OPC_DATA,	2)
+
+#define STFSM_INST_STA_RD1		STFSM_INSTR(STFSM_OPC_STA,	0x1)
+#define STFSM_INST_STA_WR1		STFSM_INSTR(STFSM_OPC_STA,	0x1)
+#define STFSM_INST_STA_RD2		STFSM_INSTR(STFSM_OPC_STA,	0x2)
+#define STFSM_INST_STA_WR1_2		STFSM_INSTR(STFSM_OPC_STA,	0x3)
+
+#define STFSM_INST_MODE			STFSM_INSTR(STFSM_OPC_MODE,	0)
+#define STFSM_INST_DUMMY		STFSM_INSTR(STFSM_OPC_DUMMY,	0)
+#define STFSM_INST_WAIT			STFSM_INSTR(STFSM_OPC_WAIT,	0)
+#define STFSM_INST_STOP			STFSM_INSTR(STFSM_OPC_STOP,	0)
+
+#define STFSM_DEFAULT_EMI_FREQ 100000000UL                        /* 100 MHz */
+#define STFSM_DEFAULT_WR_TIME  (STFSM_DEFAULT_EMI_FREQ * (15/1000)) /* 15ms */
+
+#define STFSM_FLASH_SAFE_FREQ  10000000UL                         /* 10 MHz */
+
+#define STFSM_MAX_WAIT_SEQ_MS  1000     /* FSM execution time */
+
+/* Flash Commands */
+#define FLASH_CMD_WREN         0x06
+#define FLASH_CMD_WRDI         0x04
+#define FLASH_CMD_RDID         0x9f
+#define FLASH_CMD_RDSR         0x05
+#define FLASH_CMD_RDSR2                0x35
+#define FLASH_CMD_WRSR         0x01
+#define FLASH_CMD_SE_4K                0x20
+#define FLASH_CMD_SE_32K       0x52
+#define FLASH_CMD_SE           0xd8
+#define FLASH_CMD_CHIPERASE    0xc7
+#define FLASH_CMD_WRVCR                0x81
+#define FLASH_CMD_RDVCR                0x85
+
+#define FLASH_CMD_READ         0x03    /* READ */
+#define FLASH_CMD_READ_FAST    0x0b    /* FAST READ */
+#define FLASH_CMD_READ_1_1_2   0x3b    /* DUAL OUTPUT READ */
+#define FLASH_CMD_READ_1_2_2   0xbb    /* DUAL I/O READ */
+#define FLASH_CMD_READ_1_1_4   0x6b    /* QUAD OUTPUT READ */
+#define FLASH_CMD_READ_1_4_4   0xeb    /* QUAD I/O READ */
+
+#define FLASH_CMD_WRITE                0x02    /* PAGE PROGRAM */
+#define FLASH_CMD_WRITE_1_1_2  0xa2    /* DUAL INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_2_2  0xd2    /* DUAL INPUT EXT PROGRAM */
+#define FLASH_CMD_WRITE_1_1_4  0x32    /* QUAD INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_4_4  0x12    /* QUAD INPUT EXT PROGRAM */
+
+#define FLASH_CMD_EN4B_ADDR    0xb7    /* Enter 4-byte address mode */
+#define FLASH_CMD_EX4B_ADDR    0xe9    /* Exit 4-byte address mode */
+
+/* READ commands with 32-bit addressing (N25Q256 and S25FLxxxS) */
+#define FLASH_CMD_READ4                0x13
+#define FLASH_CMD_READ4_FAST   0x0c
+#define FLASH_CMD_READ4_1_1_2  0x3c
+#define FLASH_CMD_READ4_1_2_2  0xbc
+#define FLASH_CMD_READ4_1_1_4  0x6c
+#define FLASH_CMD_READ4_1_4_4  0xec
+
+/* S25FLxxxS commands */
+#define S25FL_CMD_WRITE4_1_1_4 0x34
+#define S25FL_CMD_SE4          0xdc
+#define S25FL_CMD_CLSR         0x30
+#define S25FL_CMD_DYBWR                0xe1
+#define S25FL_CMD_DYBRD                0xe0
+#define S25FL_CMD_WRITE4       0x12    /* Note, opcode clashes with
+					* 'FLASH_CMD_WRITE_1_4_4'
+					* as found on N25Qxxx devices! */
+
+/* Status register */
+#define FLASH_STATUS_BUSY      0x01
+#define FLASH_STATUS_WEL       0x02
+#define FLASH_STATUS_BP0       0x04
+#define FLASH_STATUS_BP1       0x08
+#define FLASH_STATUS_BP2       0x10
+#define FLASH_STATUS_SRWP0     0x80
+#define FLASH_STATUS_TIMEOUT   0xff
+/* S25FL Error Flags */
+#define S25FL_STATUS_E_ERR     0x20
+#define S25FL_STATUS_P_ERR     0x40
+
+#define FLASH_PAGESIZE         256			/* In Bytes    */
+#define FLASH_PAGESIZE_32      (FLASH_PAGESIZE / 4)	/* In uint32_t */
+#define FLASH_MAX_BUSY_WAIT    (300 * HZ)	/* Maximum 'CHIPERASE' time */
+
+/*
+ * Flags to tweak operation of default read/write/erase routines
+ */
+#define CFG_READ_TOGGLE_32BIT_ADDR     0x00000001
+#define CFG_WRITE_TOGGLE_32BIT_ADDR    0x00000002
+#define CFG_WRITE_EX_32BIT_ADDR_DELAY  0x00000004
+#define CFG_ERASESEC_TOGGLE_32BIT_ADDR 0x00000008
+#define CFG_S25FL_CHECK_ERROR_FLAGS    0x00000010
+
+struct stfsm_seq {
+	uint32_t data_size;
+	uint32_t addr1;
+	uint32_t addr2;
+	uint32_t addr_cfg;
+	uint32_t seq_opc[5];
+	uint32_t mode;
+	uint32_t dummy;
+	uint32_t status;
+	uint8_t  seq[16];
+	uint32_t seq_cfg;
+} __packed __aligned(4);
+
+struct stfsm {
+	struct device		*dev;
+	void __iomem		*base;
+	struct resource		*region;
+	struct mtd_info		mtd;
+	struct mutex		lock;
+	struct flash_info       *info;
+
+	uint32_t                configuration;
+	uint32_t                fifo_dir_delay;
+	bool                    booted_from_spi;
+	bool                    reset_signal;
+	bool                    reset_por;
+
+	struct stfsm_seq stfsm_seq_read;
+	struct stfsm_seq stfsm_seq_write;
+	struct stfsm_seq stfsm_seq_en_32bit_addr;
+};
+
+/* Parameters to configure a READ or WRITE FSM sequence */
+struct seq_rw_config {
+	uint32_t        flags;          /* flags to support config */
+	uint8_t         cmd;            /* FLASH command */
+	int             write;          /* Write Sequence */
+	uint8_t         addr_pads;      /* No. of addr pads (MODE & DUMMY) */
+	uint8_t         data_pads;      /* No. of data pads */
+	uint8_t         mode_data;      /* MODE data */
+	uint8_t         mode_cycles;    /* No. of MODE cycles */
+	uint8_t         dummy_cycles;   /* No. of DUMMY cycles */
+};
+
+/* SPI Flash Device Table */
+struct flash_info {
+	char            *name;
+	/*
+	 * JEDEC id zero means "no ID" (most older chips); otherwise it has
+	 * a high byte of zero plus three data bytes: the manufacturer id,
+	 * then a two byte device id.
+	 */
+	u32             jedec_id;
+	u16             ext_id;
+	/*
+	 * The size listed here is what works with FLASH_CMD_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned        sector_size;
+	u16             n_sectors;
+	u32             flags;
+	/*
+	 * Note, where FAST_READ is supported, freq_max specifies the
+	 * FAST_READ frequency, not the READ frequency.
+	 */
+	u32             max_freq;
+	int             (*config)(struct stfsm *);
+};
+
+static int stfsm_n25q_config(struct stfsm *fsm);
+static int stfsm_mx25_config(struct stfsm *fsm);
+static int stfsm_s25fl_config(struct stfsm *fsm);
+static int stfsm_w25q_config(struct stfsm *fsm);
+
+static struct flash_info flash_types[] = {
+	/*
+	 * ST Microelectronics/Numonyx --
+	 * (newer production versions may have feature updates
+	 * (eg faster operating frequency)
+	 */
+#define M25P_FLAG (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST)
+	{ "m25p40",  0x202013, 0,  64 * 1024,   8, M25P_FLAG, 25, NULL },
+	{ "m25p80",  0x202014, 0,  64 * 1024,  16, M25P_FLAG, 25, NULL },
+	{ "m25p16",  0x202015, 0,  64 * 1024,  32, M25P_FLAG, 25, NULL },
+	{ "m25p32",  0x202016, 0,  64 * 1024,  64, M25P_FLAG, 50, NULL },
+	{ "m25p64",  0x202017, 0,  64 * 1024, 128, M25P_FLAG, 50, NULL },
+	{ "m25p128", 0x202018, 0, 256 * 1024,  64, M25P_FLAG, 50, NULL },
+
+#define M25PX_FLAG (FLASH_FLAG_READ_WRITE      |	\
+		    FLASH_FLAG_READ_FAST        |	\
+		    FLASH_FLAG_READ_1_1_2       |	\
+		    FLASH_FLAG_WRITE_1_1_2)
+	{ "m25px32", 0x207116, 0,  64 * 1024,  64, M25PX_FLAG, 75, NULL },
+	{ "m25px64", 0x207117, 0,  64 * 1024, 128, M25PX_FLAG, 75, NULL },
+
+#define MX25_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_READ_1_2_2        |	\
+		   FLASH_FLAG_READ_1_1_4        |	\
+		   FLASH_FLAG_READ_1_4_4        |	\
+		   FLASH_FLAG_SE_4K             |	\
+		   FLASH_FLAG_SE_32K)
+	{ "mx25l25635e", 0xc22019, 0, 64*1024, 512,
+	  (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70,
+	  stfsm_mx25_config },
+
+#define N25Q_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_READ_1_2_2        |	\
+		   FLASH_FLAG_READ_1_1_4        |	\
+		   FLASH_FLAG_READ_1_4_4        |	\
+		   FLASH_FLAG_WRITE_1_1_2       |	\
+		   FLASH_FLAG_WRITE_1_2_2       |	\
+		   FLASH_FLAG_WRITE_1_1_4       |	\
+		   FLASH_FLAG_WRITE_1_4_4)
+	{ "n25q128", 0x20ba18, 0, 64 * 1024,  256, N25Q_FLAG, 108,
+	  stfsm_n25q_config },
+	{ "n25q256", 0x20ba19, 0, 64 * 1024,  512,
+	  N25Q_FLAG | FLASH_FLAG_32BIT_ADDR, 108, stfsm_n25q_config },
+
+	/*
+	 * Spansion S25FLxxxP
+	 *     - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+	 */
+#define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE  |	\
+			FLASH_FLAG_READ_1_1_2   |	\
+			FLASH_FLAG_READ_1_2_2   |	\
+			FLASH_FLAG_READ_1_1_4   |	\
+			FLASH_FLAG_READ_1_4_4   |	\
+			FLASH_FLAG_WRITE_1_1_4  |	\
+			FLASH_FLAG_READ_FAST)
+	{ "s25fl129p0", 0x012018, 0x4d00, 256 * 1024,  64, S25FLXXXP_FLAG, 80,
+	  stfsm_s25fl_config },
+	{ "s25fl129p1", 0x012018, 0x4d01,  64 * 1024, 256, S25FLXXXP_FLAG, 80,
+	  stfsm_s25fl_config },
+
+	/*
+	 * Spansion S25FLxxxS
+	 *     - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+	 *     - RESET# signal supported by die but not bristled out on all
+	 *       package types.  The package type is a function of board design,
+	 *       so this information is captured in the board's flags.
+	 *     - Supports 'DYB' sector protection. Depending on variant, sectors
+	 *       may default to locked state on power-on.
+	 */
+#define S25FLXXXS_FLAG (S25FLXXXP_FLAG         |	\
+			FLASH_FLAG_RESET        |	\
+			FLASH_FLAG_DYB_LOCKING)
+	{ "s25fl128s0", 0x012018, 0x0300,  256 * 1024, 64, S25FLXXXS_FLAG, 80,
+	  stfsm_s25fl_config },
+	{ "s25fl128s1", 0x012018, 0x0301,  64 * 1024, 256, S25FLXXXS_FLAG, 80,
+	  stfsm_s25fl_config },
+	{ "s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128,
+	  S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+	{ "s25fl256s1", 0x010219, 0x4d01,  64 * 1024, 512,
+	  S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+
+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+#define W25X_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_WRITE_1_1_2)
+	{ "w25x40",  0xef3013, 0,  64 * 1024,   8, W25X_FLAG, 75, NULL },
+	{ "w25x80",  0xef3014, 0,  64 * 1024,  16, W25X_FLAG, 75, NULL },
+	{ "w25x16",  0xef3015, 0,  64 * 1024,  32, W25X_FLAG, 75, NULL },
+	{ "w25x32",  0xef3016, 0,  64 * 1024,  64, W25X_FLAG, 75, NULL },
+	{ "w25x64",  0xef3017, 0,  64 * 1024, 128, W25X_FLAG, 75, NULL },
+
+	/* Winbond -- w25q "blocks" are 64K, "sectors" are 4KiB */
+#define W25Q_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_READ_1_2_2        |	\
+		   FLASH_FLAG_READ_1_1_4        |	\
+		   FLASH_FLAG_READ_1_4_4        |	\
+		   FLASH_FLAG_WRITE_1_1_4)
+	{ "w25q80",  0xef4014, 0,  64 * 1024,  16, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q16",  0xef4015, 0,  64 * 1024,  32, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q32",  0xef4016, 0,  64 * 1024,  64, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q64",  0xef4017, 0,  64 * 1024, 128, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+
+	/* Sentinel */
+	{ NULL, 0x000000, 0, 0, 0, 0, 0, NULL },
+};
+
+/*
+ * FSM message sequence configurations:
+ *
+ * All configs are presented in order of preference
+ */
+
+/* Default READ configurations, in order of preference */
+static struct seq_rw_config default_read_configs[] = {
+	{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4,	0, 4, 4, 0x00, 2, 4},
+	{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4,	0, 1, 4, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2,	0, 2, 2, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2,	0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	FLASH_CMD_READ_FAST,	0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ,		0, 1, 1, 0x00, 0, 0},
+	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/* Default WRITE configurations */
+static struct seq_rw_config default_write_configs[] = {
+	{FLASH_FLAG_WRITE_1_4_4, FLASH_CMD_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0},
+	{FLASH_FLAG_WRITE_1_1_4, FLASH_CMD_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0},
+	{FLASH_FLAG_WRITE_1_2_2, FLASH_CMD_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0},
+	{FLASH_FLAG_WRITE_1_1_2, FLASH_CMD_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0},
+	{FLASH_FLAG_READ_WRITE,  FLASH_CMD_WRITE,       1, 1, 1, 0x00, 0, 0},
+	{0x00,			 0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [N25Qxxx] Configuration
+ */
+#define N25Q_VCR_DUMMY_CYCLES(x)	(((x) & 0xf) << 4)
+#define N25Q_VCR_XIP_DISABLED		((uint8_t)0x1 << 3)
+#define N25Q_VCR_WRAP_CONT		0x3
+
+/* N25Q 3-byte Address READ configurations
+ *	- 'FAST' variants configured for 8 dummy cycles.
+ *
+ * Note, the number of dummy cycles used for 'FAST' READ operations is
+ * configurable and would normally be tuned according to the READ command and
+ * operating frequency.  However, this applies universally to all 'FAST' READ
+ * commands, including those used by the SPIBoot controller, and remains in
+ * force until the device is power-cycled.  Since the SPIBoot controller is
+ * hard-wired to use 8 dummy cycles, we must configure the device to also use 8
+ * cycles.
+ */
+static struct seq_rw_config n25q_read3_configs[] = {
+	{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4,	0, 4, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4,	0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2,	0, 2, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2,	0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	FLASH_CMD_READ_FAST,	0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ,	        0, 1, 1, 0x00, 0, 0},
+	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/* N25Q 4-byte Address READ configurations
+ *	- use special 4-byte address READ commands (reduces overheads, and
+ *        reduces risk of hitting watchdog reset issues).
+ *	- 'FAST' variants configured for 8 dummy cycles (see note above.)
+ */
+static struct seq_rw_config n25q_read4_configs[] = {
+	{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4,	0, 4, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4,	0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2,	0, 2, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2,	0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	FLASH_CMD_READ4_FAST,	0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4,	0, 1, 1, 0x00, 0, 0},
+	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [MX25xxx] Configuration
+ */
+#define MX25_STATUS_QE			(0x1 << 6)
+
+static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR) |
+			   SEQ_OPC_CSDEASSERT);
+
+	seq->seq[0] = STFSM_INST_CMD1;
+	seq->seq[1] = STFSM_INST_WAIT;
+	seq->seq[2] = STFSM_INST_STOP;
+
+	seq->seq_cfg = (SEQ_CFG_PADS_1 |
+			SEQ_CFG_ERASE |
+			SEQ_CFG_READNOTWRITE |
+			SEQ_CFG_CSDEASSERT |
+			SEQ_CFG_STARTSEQ);
+
+	return 0;
+}
+
+/*
+ * [S25FLxxx] Configuration
+ */
+#define STFSM_S25FL_CONFIG_QE		(0x1 << 1)
+
+/*
+ * S25FLxxxS devices provide three ways of supporting 32-bit addressing: Bank
+ * Register, Extended Address Modes, and a 32-bit address command set.  The
+ * 32-bit address command set is used here, since it avoids any problems with
+ * entering a state that is incompatible with the SPIBoot Controller.
+ */
+static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
+	{FLASH_FLAG_READ_1_4_4,  FLASH_CMD_READ4_1_4_4,  0, 4, 4, 0x00, 2, 4},
+	{FLASH_FLAG_READ_1_1_4,  FLASH_CMD_READ4_1_1_4,  0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2,  FLASH_CMD_READ4_1_2_2,  0, 2, 2, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_1_2,  FLASH_CMD_READ4_1_1_2,  0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,   FLASH_CMD_READ4_FAST,   0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE,  FLASH_CMD_READ4,        0, 1, 1, 0x00, 0, 0},
+	{0x00,                   0,                      0, 0, 0, 0x00, 0, 0},
+};
+
+static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
+	{FLASH_FLAG_WRITE_1_1_4, S25FL_CMD_WRITE4_1_1_4, 1, 1, 4, 0x00, 0, 0},
+	{FLASH_FLAG_READ_WRITE,  S25FL_CMD_WRITE4,       1, 1, 1, 0x00, 0, 0},
+	{0x00,                   0,                      0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [W25Qxxx] Configuration
+ */
+#define W25Q_STATUS_QE			(0x1 << 9)
+
+static struct stfsm_seq stfsm_seq_read_jedec = {
+	.data_size = TRANSFER_SIZE(8),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_RDID)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_read_status_fifo = {
+	.data_size = TRANSFER_SIZE(4),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_RDSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_sector = {
+	/* 'addr_cfg' configured during initialisation */
+	.seq_opc = {
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(FLASH_CMD_SE)),
+	},
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_ADD1,
+		STFSM_INST_ADD2,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_chip = {
+	.seq_opc = {
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(FLASH_CMD_CHIPERASE) | SEQ_OPC_CSDEASSERT),
+	},
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_WAIT,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_ERASE |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_write_status = {
+	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+	.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WRSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_STA_WR1,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_wrvcr = {
+	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+	.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WRVCR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_STA_WR1,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR));
+	seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
+			   SEQ_OPC_CSDEASSERT);
+
+	seq->seq[0] = STFSM_INST_CMD2;
+	seq->seq[1] = STFSM_INST_CMD1;
+	seq->seq[2] = STFSM_INST_WAIT;
+	seq->seq[3] = STFSM_INST_STOP;
+
+	seq->seq_cfg = (SEQ_CFG_PADS_1 |
+			SEQ_CFG_ERASE |
+			SEQ_CFG_READNOTWRITE |
+			SEQ_CFG_CSDEASSERT |
+			SEQ_CFG_STARTSEQ);
+
+	return 0;
+}
+
+static inline int stfsm_is_idle(struct stfsm *fsm)
+{
+	return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10;
+}
+
+static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
+{
+	return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
+}
+
+static void stfsm_clear_fifo(struct stfsm *fsm)
+{
+	uint32_t avail;
+
+	for (;;) {
+		avail = stfsm_fifo_available(fsm);
+		if (!avail)
+			break;
+
+		while (avail) {
+			readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+			avail--;
+		}
+	}
+}
+
+static inline void stfsm_load_seq(struct stfsm *fsm,
+				  const struct stfsm_seq *seq)
+{
+	void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE;
+	const uint32_t *src = (const uint32_t *)seq;
+	int words = sizeof(*seq) / sizeof(*src);
+
+	BUG_ON(!stfsm_is_idle(fsm));
+
+	while (words--) {
+		writel(*src, dst);
+		src++;
+		dst += 4;
+	}
+}
+
+static void stfsm_wait_seq(struct stfsm *fsm)
+{
+	unsigned long deadline;
+	int timeout = 0;
+
+	deadline = jiffies + msecs_to_jiffies(STFSM_MAX_WAIT_SEQ_MS);
+
+	while (!timeout) {
+		if (time_after_eq(jiffies, deadline))
+			timeout = 1;
+
+		if (stfsm_is_idle(fsm))
+			return;
+
+		cond_resched();
+	}
+
+	dev_err(fsm->dev, "timeout on sequence completion\n");
+}
+
+static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size)
+{
+	uint32_t remaining = size >> 2;
+	uint32_t avail;
+	uint32_t words;
+
+	dev_dbg(fsm->dev, "Reading %d bytes from FIFO\n", size);
+
+	BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3));
+
+	while (remaining) {
+		for (;;) {
+			avail = stfsm_fifo_available(fsm);
+			if (avail)
+				break;
+			udelay(1);
+		}
+		words = min(avail, remaining);
+		remaining -= words;
+
+		readsl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+		buf += words;
+	}
+}
+
+static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
+			    uint32_t size)
+{
+	uint32_t words = size >> 2;
+
+	dev_dbg(fsm->dev, "writing %d bytes to FIFO\n", size);
+
+	BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3));
+
+	writesl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+
+	return size;
+}
+
+static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
+{
+	struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr;
+	uint32_t cmd = enter ? FLASH_CMD_EN4B_ADDR : FLASH_CMD_EX4B_ADDR;
+
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(cmd) |
+			   SEQ_OPC_CSDEASSERT);
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+static uint8_t stfsm_wait_busy(struct stfsm *fsm)
+{
+	struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+	unsigned long deadline;
+	uint32_t status;
+	int timeout = 0;
+
+	/* Use RDRS1 */
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(FLASH_CMD_RDSR));
+
+	/* Load read_status sequence */
+	stfsm_load_seq(fsm, seq);
+
+	/*
+	 * Repeat until busy bit is deasserted, or timeout, or error (S25FLxxxS)
+	 */
+	deadline = jiffies + FLASH_MAX_BUSY_WAIT;
+	while (!timeout) {
+		if (time_after_eq(jiffies, deadline))
+			timeout = 1;
+
+		stfsm_wait_seq(fsm);
+
+		stfsm_read_fifo(fsm, &status, 4);
+
+		if ((status & FLASH_STATUS_BUSY) == 0)
+			return 0;
+
+		if ((fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) &&
+		    ((status & S25FL_STATUS_P_ERR) ||
+		     (status & S25FL_STATUS_E_ERR)))
+			return (uint8_t)(status & 0xff);
+
+		if (!timeout)
+			/* Restart */
+			writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG);
+
+		cond_resched();
+	}
+
+	dev_err(fsm->dev, "timeout on wait_busy\n");
+
+	return FLASH_STATUS_TIMEOUT;
+}
+
+static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
+			   uint8_t *status)
+{
+	struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+	uint32_t tmp;
+
+	dev_dbg(fsm->dev, "reading STA[%s]\n",
+		(cmd == FLASH_CMD_RDSR) ? "1" : "2");
+
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(cmd)),
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_read_fifo(fsm, &tmp, 4);
+
+	*status = (uint8_t)(tmp >> 24);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+static int stfsm_write_status(struct stfsm *fsm, uint16_t status,
+			       int sta_bytes)
+{
+	struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+	dev_dbg(fsm->dev, "writing STA[%s] 0x%04x\n",
+		(sta_bytes == 1) ? "1" : "1+2", status);
+
+	seq->status = (uint32_t)status | STA_PADS_1 | STA_CSDEASSERT;
+	seq->seq[2] = (sta_bytes == 1) ?
+		STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+};
+
+static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
+{
+	struct stfsm_seq *seq = &stfsm_seq_wrvcr;
+
+	dev_dbg(fsm->dev, "writing VCR 0x%02x\n", data);
+
+	seq->status = (STA_DATA_BYTE1(data) | STA_PADS_1 | STA_CSDEASSERT);
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+/*
+ * SoC reset on 'boot-from-spi' systems
+ *
+ * Certain modes of operation cause the Flash device to enter a particular state
+ * for a period of time (e.g. 'Erase Sector', 'Quad Enable', and 'Enter 32-bit
+ * Addr' commands).  On boot-from-spi systems, it is important to consider what
+ * happens if a warm reset occurs during this period.  The SPIBoot controller
+ * assumes that Flash device is in its default reset state, 24-bit address mode,
+ * and ready to accept commands.  This can be achieved using some form of
+ * on-board logic/controller to force a device POR in response to a SoC-level
+ * reset or by making use of the device reset signal if available (limited
+ * number of devices only).
+ *
+ * Failure to take such precautions can cause problems following a warm reset.
+ * For some operations (e.g. ERASE), there is little that can be done.  For
+ * other modes of operation (e.g. 32-bit addressing), options are often
+ * available that can help minimise the window in which a reset could cause a
+ * problem.
+ *
+ */
+static bool stfsm_can_handle_soc_reset(struct stfsm *fsm)
+{
+	/* Reset signal is available on the board and supported by the device */
+	if (fsm->reset_signal && fsm->info->flags & FLASH_FLAG_RESET)
+		return true;
+
+	/* Board-level logic forces a power-on-reset */
+	if (fsm->reset_por)
+		return true;
+
+	/* Reset is not properly handled and may result in failure to reboot */
+	return false;
+}
+
+/* Configure 'addr_cfg' according to addressing mode */
+static void stfsm_prepare_erasesec_seq(struct stfsm *fsm,
+				       struct stfsm_seq *seq)
+{
+	int addr1_cycles = fsm->info->flags & FLASH_FLAG_32BIT_ADDR ? 16 : 8;
+
+	seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(addr1_cycles) |
+			 ADR_CFG_PADS_1_ADD1 |
+			 ADR_CFG_CYCLES_ADD2(16) |
+			 ADR_CFG_PADS_1_ADD2 |
+			 ADR_CFG_CSDEASSERT_ADD2);
+}
+
+/* Search for preferred configuration based on available flags */
+static struct seq_rw_config *
+stfsm_search_seq_rw_configs(struct stfsm *fsm,
+			    struct seq_rw_config cfgs[])
+{
+	struct seq_rw_config *config;
+	int flags = fsm->info->flags;
+
+	for (config = cfgs; config->cmd != 0; config++)
+		if ((config->flags & flags) == config->flags)
+			return config;
+
+	return NULL;
+}
+
+/* Prepare a READ/WRITE sequence according to configuration parameters */
+static void stfsm_prepare_rw_seq(struct stfsm *fsm,
+				 struct stfsm_seq *seq,
+				 struct seq_rw_config *cfg)
+{
+	int addr1_cycles, addr2_cycles;
+	int i = 0;
+
+	memset(seq, 0, sizeof(*seq));
+
+	/* Add READ/WRITE OPC  */
+	seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+			     SEQ_OPC_CYCLES(8) |
+			     SEQ_OPC_OPCODE(cfg->cmd));
+
+	/* Add WREN OPC for a WRITE sequence */
+	if (cfg->write)
+		seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+				     SEQ_OPC_CYCLES(8) |
+				     SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
+				     SEQ_OPC_CSDEASSERT);
+
+	/* Address configuration (24 or 32-bit addresses) */
+	addr1_cycles  = (fsm->info->flags & FLASH_FLAG_32BIT_ADDR) ? 16 : 8;
+	addr1_cycles /= cfg->addr_pads;
+	addr2_cycles  = 16 / cfg->addr_pads;
+	seq->addr_cfg = ((addr1_cycles & 0x3f) << 0 |	/* ADD1 cycles */
+			 (cfg->addr_pads - 1) << 6 |	/* ADD1 pads */
+			 (addr2_cycles & 0x3f) << 16 |	/* ADD2 cycles */
+			 ((cfg->addr_pads - 1) << 22));	/* ADD2 pads */
+
+	/* Data/Sequence configuration */
+	seq->seq_cfg = ((cfg->data_pads - 1) << 16 |
+			SEQ_CFG_STARTSEQ |
+			SEQ_CFG_CSDEASSERT);
+	if (!cfg->write)
+		seq->seq_cfg |= SEQ_CFG_READNOTWRITE;
+
+	/* Mode configuration (no. of pads taken from addr cfg) */
+	seq->mode = ((cfg->mode_data & 0xff) << 0 |	/* data */
+		     (cfg->mode_cycles & 0x3f) << 16 |	/* cycles */
+		     (cfg->addr_pads - 1) << 22);	/* pads */
+
+	/* Dummy configuration (no. of pads taken from addr cfg) */
+	seq->dummy = ((cfg->dummy_cycles & 0x3f) << 16 |	/* cycles */
+		      (cfg->addr_pads - 1) << 22);		/* pads */
+
+
+	/* Instruction sequence */
+	i = 0;
+	if (cfg->write)
+		seq->seq[i++] = STFSM_INST_CMD2;
+
+	seq->seq[i++] = STFSM_INST_CMD1;
+
+	seq->seq[i++] = STFSM_INST_ADD1;
+	seq->seq[i++] = STFSM_INST_ADD2;
+
+	if (cfg->mode_cycles)
+		seq->seq[i++] = STFSM_INST_MODE;
+
+	if (cfg->dummy_cycles)
+		seq->seq[i++] = STFSM_INST_DUMMY;
+
+	seq->seq[i++] =
+		cfg->write ? STFSM_INST_DATA_WRITE : STFSM_INST_DATA_READ;
+	seq->seq[i++] = STFSM_INST_STOP;
+}
+
+static int stfsm_search_prepare_rw_seq(struct stfsm *fsm,
+				       struct stfsm_seq *seq,
+				       struct seq_rw_config *cfgs)
+{
+	struct seq_rw_config *config;
+
+	config = stfsm_search_seq_rw_configs(fsm, cfgs);
+	if (!config) {
+		dev_err(fsm->dev, "failed to find suitable config\n");
+		return -EINVAL;
+	}
+
+	stfsm_prepare_rw_seq(fsm, seq, config);
+
+	return 0;
+}
+
+/* Prepare a READ/WRITE/ERASE 'default' sequences */
+static int stfsm_prepare_rwe_seqs_default(struct stfsm *fsm)
+{
+	uint32_t flags = fsm->info->flags;
+	int ret;
+
+	/* Configure 'READ' sequence */
+	ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+					  default_read_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"failed to prep READ sequence with flags [0x%08x]\n",
+			flags);
+		return ret;
+	}
+
+	/* Configure 'WRITE' sequence */
+	ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+					  default_write_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"failed to prep WRITE sequence with flags [0x%08x]\n",
+			flags);
+		return ret;
+	}
+
+	/* Configure 'ERASE_SECTOR' sequence */
+	stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+	return 0;
+}
+
+static int stfsm_mx25_config(struct stfsm *fsm)
+{
+	uint32_t flags = fsm->info->flags;
+	uint32_t data_pads;
+	uint8_t sta;
+	int ret;
+	bool soc_reset;
+
+	/*
+	 * Use default READ/WRITE sequences
+	 */
+	ret = stfsm_prepare_rwe_seqs_default(fsm);
+	if (ret)
+		return ret;
+
+	/*
+	 * Configure 32-bit Address Support
+	 */
+	if (flags & FLASH_FLAG_32BIT_ADDR) {
+		/* Configure 'enter_32bitaddr' FSM sequence */
+		stfsm_mx25_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+		soc_reset = stfsm_can_handle_soc_reset(fsm);
+		if (soc_reset || !fsm->booted_from_spi) {
+			/* If we can handle SoC resets, we enable 32-bit address
+			 * mode pervasively */
+			stfsm_enter_32bit_addr(fsm, 1);
+
+		} else {
+			/* Else, enable/disable 32-bit addressing before/after
+			 * each operation */
+			fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR |
+					      CFG_WRITE_TOGGLE_32BIT_ADDR |
+					      CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+			/* It seems a small delay is required after exiting
+			 * 32-bit mode following a write operation.  The issue
+			 * is under investigation.
+			 */
+			fsm->configuration |= CFG_WRITE_EX_32BIT_ADDR_DELAY;
+		}
+	}
+
+	/* For QUAD mode, set 'QE' STATUS bit */
+	data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	if (data_pads == 4) {
+		stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta);
+		sta |= MX25_STATUS_QE;
+		stfsm_write_status(fsm, sta, 1);
+	}
+
+	return 0;
+}
+
+static int stfsm_n25q_config(struct stfsm *fsm)
+{
+	uint32_t flags = fsm->info->flags;
+	uint8_t vcr;
+	int ret = 0;
+	bool soc_reset;
+
+	/* Configure 'READ' sequence */
+	if (flags & FLASH_FLAG_32BIT_ADDR)
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+						  n25q_read4_configs);
+	else
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+						  n25q_read3_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"failed to prepare READ sequence with flags [0x%08x]\n",
+			flags);
+		return ret;
+	}
+
+	/* Configure 'WRITE' sequence (default configs) */
+	ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+					  default_write_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"preparing WRITE sequence using flags [0x%08x] failed\n",
+			flags);
+		return ret;
+	}
+
+	/* * Configure 'ERASE_SECTOR' sequence */
+	stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+	/* Configure 32-bit address support */
+	if (flags & FLASH_FLAG_32BIT_ADDR) {
+		stfsm_n25q_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+		soc_reset = stfsm_can_handle_soc_reset(fsm);
+		if (soc_reset || !fsm->booted_from_spi) {
+			/*
+			 * If we can handle SoC resets, we enable 32-bit
+			 * address mode pervasively
+			 */
+			stfsm_enter_32bit_addr(fsm, 1);
+		} else {
+			/*
+			 * If not, enable/disable for WRITE and ERASE
+			 * operations (READ uses special commands)
+			 */
+			fsm->configuration = (CFG_WRITE_TOGGLE_32BIT_ADDR |
+					      CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+		}
+	}
+
+	/*
+	 * Configure device to use 8 dummy cycles
+	 */
+	vcr = (N25Q_VCR_DUMMY_CYCLES(8) | N25Q_VCR_XIP_DISABLED |
+	       N25Q_VCR_WRAP_CONT);
+	stfsm_wrvcr(fsm, vcr);
+
+	return 0;
+}
+
+static void stfsm_s25fl_prepare_erasesec_seq_32(struct stfsm_seq *seq)
+{
+	seq->seq_opc[1] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(S25FL_CMD_SE4));
+
+	seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+			 ADR_CFG_PADS_1_ADD1 |
+			 ADR_CFG_CYCLES_ADD2(16) |
+			 ADR_CFG_PADS_1_ADD2 |
+			 ADR_CFG_CSDEASSERT_ADD2);
+}
+
+static void stfsm_s25fl_read_dyb(struct stfsm *fsm, uint32_t offs, uint8_t *dby)
+{
+	uint32_t tmp;
+	struct stfsm_seq seq = {
+		.data_size = TRANSFER_SIZE(4),
+		.seq_opc[0] = (SEQ_OPC_PADS_1 |
+			       SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(S25FL_CMD_DYBRD)),
+		.addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+			     ADR_CFG_PADS_1_ADD1 |
+			     ADR_CFG_CYCLES_ADD2(16) |
+			     ADR_CFG_PADS_1_ADD2),
+		.addr1 = (offs >> 16) & 0xffff,
+		.addr2 = offs & 0xffff,
+		.seq = {
+			STFSM_INST_CMD1,
+			STFSM_INST_ADD1,
+			STFSM_INST_ADD2,
+			STFSM_INST_DATA_READ,
+			STFSM_INST_STOP,
+		},
+		.seq_cfg = (SEQ_CFG_PADS_1 |
+			    SEQ_CFG_READNOTWRITE |
+			    SEQ_CFG_CSDEASSERT |
+			    SEQ_CFG_STARTSEQ),
+	};
+
+	stfsm_load_seq(fsm, &seq);
+
+	stfsm_read_fifo(fsm, &tmp, 4);
+
+	*dby = (uint8_t)(tmp >> 24);
+
+	stfsm_wait_seq(fsm);
+}
+
+static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby)
+{
+	struct stfsm_seq seq = {
+		.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
+			       SEQ_OPC_CSDEASSERT),
+		.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)),
+		.addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+			     ADR_CFG_PADS_1_ADD1 |
+			     ADR_CFG_CYCLES_ADD2(16) |
+			     ADR_CFG_PADS_1_ADD2),
+		.status = (uint32_t)dby | STA_PADS_1 | STA_CSDEASSERT,
+		.addr1 = (offs >> 16) & 0xffff,
+		.addr2 = offs & 0xffff,
+		.seq = {
+			STFSM_INST_CMD1,
+			STFSM_INST_CMD2,
+			STFSM_INST_ADD1,
+			STFSM_INST_ADD2,
+			STFSM_INST_STA_WR1,
+			STFSM_INST_STOP,
+		},
+		.seq_cfg = (SEQ_CFG_PADS_1 |
+			    SEQ_CFG_READNOTWRITE |
+			    SEQ_CFG_CSDEASSERT |
+			    SEQ_CFG_STARTSEQ),
+	};
+
+	stfsm_load_seq(fsm, &seq);
+	stfsm_wait_seq(fsm);
+
+	stfsm_wait_busy(fsm);
+}
+
+static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm)
+{
+	struct stfsm_seq seq = {
+		.seq_opc[0] = (SEQ_OPC_PADS_1 |
+			       SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(S25FL_CMD_CLSR) |
+			       SEQ_OPC_CSDEASSERT),
+		.seq_opc[1] = (SEQ_OPC_PADS_1 |
+			       SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(FLASH_CMD_WRDI) |
+			       SEQ_OPC_CSDEASSERT),
+		.seq = {
+			STFSM_INST_CMD1,
+			STFSM_INST_CMD2,
+			STFSM_INST_WAIT,
+			STFSM_INST_STOP,
+		},
+		.seq_cfg = (SEQ_CFG_PADS_1 |
+			    SEQ_CFG_ERASE |
+			    SEQ_CFG_READNOTWRITE |
+			    SEQ_CFG_CSDEASSERT |
+			    SEQ_CFG_STARTSEQ),
+	};
+
+	stfsm_load_seq(fsm, &seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+static int stfsm_s25fl_config(struct stfsm *fsm)
+{
+	struct flash_info *info = fsm->info;
+	uint32_t flags = info->flags;
+	uint32_t data_pads;
+	uint32_t offs;
+	uint16_t sta_wr;
+	uint8_t sr1, cr1, dyb;
+	int ret;
+
+	if (flags & FLASH_FLAG_32BIT_ADDR) {
+		/*
+		 * Prepare Read/Write/Erase sequences according to S25FLxxx
+		 * 32-bit address command set
+		 */
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+						  stfsm_s25fl_read4_configs);
+		if (ret)
+			return ret;
+
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+						  stfsm_s25fl_write4_configs);
+		if (ret)
+			return ret;
+
+		stfsm_s25fl_prepare_erasesec_seq_32(&stfsm_seq_erase_sector);
+
+	} else {
+		/* Use default configurations for 24-bit addressing */
+		ret = stfsm_prepare_rwe_seqs_default(fsm);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * For devices that support 'DYB' sector locking, check lock status and
+	 * unlock sectors if necessary (some variants power-on with sectors
+	 * locked by default)
+	 */
+	if (flags & FLASH_FLAG_DYB_LOCKING) {
+		offs = 0;
+		for (offs = 0; offs < info->sector_size * info->n_sectors;) {
+			stfsm_s25fl_read_dyb(fsm, offs, &dyb);
+			if (dyb == 0x00)
+				stfsm_s25fl_write_dyb(fsm, offs, 0xff);
+
+			/* Handle bottom/top 4KiB parameter sectors */
+			if ((offs < info->sector_size * 2) ||
+			    (offs >= (info->sector_size - info->n_sectors * 4)))
+				offs += 0x1000;
+			else
+				offs += 0x10000;
+		}
+	}
+
+	/* Check status of 'QE' bit */
+	data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	stfsm_read_status(fsm, FLASH_CMD_RDSR2, &cr1);
+	if (data_pads == 4) {
+		if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
+			/* Set 'QE' */
+			cr1 |= STFSM_S25FL_CONFIG_QE;
+
+			stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1);
+			sta_wr = ((uint16_t)cr1  << 8) | sr1;
+
+			stfsm_write_status(fsm, sta_wr, 2);
+
+			stfsm_wait_busy(fsm);
+		}
+	} else {
+		if ((cr1 & STFSM_S25FL_CONFIG_QE)) {
+			/* Clear 'QE' */
+			cr1 &= ~STFSM_S25FL_CONFIG_QE;
+
+			stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1);
+			sta_wr = ((uint16_t)cr1  << 8) | sr1;
+
+			stfsm_write_status(fsm, sta_wr, 2);
+
+			stfsm_wait_busy(fsm);
+		}
+
+	}
+
+	/*
+	 * S25FLxxx devices support Program and Error error flags.
+	 * Configure driver to check flags and clear if necessary.
+	 */
+	fsm->configuration |= CFG_S25FL_CHECK_ERROR_FLAGS;
+
+	return 0;
+}
+
+static int stfsm_w25q_config(struct stfsm *fsm)
+{
+	uint32_t data_pads;
+	uint16_t sta_wr;
+	uint8_t sta1, sta2;
+	int ret;
+
+	ret = stfsm_prepare_rwe_seqs_default(fsm);
+	if (ret)
+		return ret;
+
+	/* If using QUAD mode, set QE STATUS bit */
+	data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	if (data_pads == 4) {
+		stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta1);
+		stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sta2);
+
+		sta_wr = ((uint16_t)sta2 << 8) | sta1;
+
+		sta_wr |= W25Q_STATUS_QE;
+
+		stfsm_write_status(fsm, sta_wr, 2);
+
+		stfsm_wait_busy(fsm);
+	}
+
+	return 0;
+}
+
+static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size,
+		      uint32_t offset)
+{
+	struct stfsm_seq *seq = &fsm->stfsm_seq_read;
+	uint32_t data_pads;
+	uint32_t read_mask;
+	uint32_t size_ub;
+	uint32_t size_lb;
+	uint32_t size_mop;
+	uint32_t tmp[4];
+	uint32_t page_buf[FLASH_PAGESIZE_32];
+	uint8_t *p;
+
+	dev_dbg(fsm->dev, "reading %d bytes from 0x%08x\n", size, offset);
+
+	/* Enter 32-bit address mode, if required */
+	if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 1);
+
+	/* Must read in multiples of 32 cycles (or 32*pads/8 Bytes) */
+	data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+	read_mask = (data_pads << 2) - 1;
+
+	/* Handle non-aligned buf */
+	p = ((uint32_t)buf & 0x3) ? (uint8_t *)page_buf : buf;
+
+	/* Handle non-aligned size */
+	size_ub = (size + read_mask) & ~read_mask;
+	size_lb = size & ~read_mask;
+	size_mop = size & read_mask;
+
+	seq->data_size = TRANSFER_SIZE(size_ub);
+	seq->addr1 = (offset >> 16) & 0xffff;
+	seq->addr2 = offset & 0xffff;
+
+	stfsm_load_seq(fsm, seq);
+
+	if (size_lb)
+		stfsm_read_fifo(fsm, (uint32_t *)p, size_lb);
+
+	if (size_mop) {
+		stfsm_read_fifo(fsm, tmp, read_mask + 1);
+		memcpy(p + size_lb, &tmp, size_mop);
+	}
+
+	/* Handle non-aligned buf */
+	if ((uint32_t)buf & 0x3)
+		memcpy(buf, page_buf, size);
+
+	/* Wait for sequence to finish */
+	stfsm_wait_seq(fsm);
+
+	stfsm_clear_fifo(fsm);
+
+	/* Exit 32-bit address mode, if required */
+	if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 0);
+
+	return 0;
+}
+
+static int stfsm_write(struct stfsm *fsm, const uint8_t *buf,
+		       uint32_t size, uint32_t offset)
+{
+	struct stfsm_seq *seq = &fsm->stfsm_seq_write;
+	uint32_t data_pads;
+	uint32_t write_mask;
+	uint32_t size_ub;
+	uint32_t size_lb;
+	uint32_t size_mop;
+	uint32_t tmp[4];
+	uint32_t page_buf[FLASH_PAGESIZE_32];
+	uint8_t *t = (uint8_t *)&tmp;
+	const uint8_t *p;
+	int ret;
+	int i;
+
+	dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset);
+
+	/* Enter 32-bit address mode, if required */
+	if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 1);
+
+	/* Must write in multiples of 32 cycles (or 32*pads/8 bytes) */
+	data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+	write_mask = (data_pads << 2) - 1;
+
+	/* Handle non-aligned buf */
+	if ((uint32_t)buf & 0x3) {
+		memcpy(page_buf, buf, size);
+		p = (uint8_t *)page_buf;
+	} else {
+		p = buf;
+	}
+
+	/* Handle non-aligned size */
+	size_ub = (size + write_mask) & ~write_mask;
+	size_lb = size & ~write_mask;
+	size_mop = size & write_mask;
+
+	seq->data_size = TRANSFER_SIZE(size_ub);
+	seq->addr1 = (offset >> 16) & 0xffff;
+	seq->addr2 = offset & 0xffff;
+
+	/* Need to set FIFO to write mode, before writing data to FIFO (see
+	 * GNBvb79594)
+	 */
+	writel(0x00040000, fsm->base + SPI_FAST_SEQ_CFG);
+
+	/*
+	 * Before writing data to the FIFO, apply a small delay to allow a
+	 * potential change of FIFO direction to complete.
+	 */
+	if (fsm->fifo_dir_delay == 0)
+		readl(fsm->base + SPI_FAST_SEQ_CFG);
+	else
+		udelay(fsm->fifo_dir_delay);
+
+
+	/* Write data to FIFO, before starting sequence (see GNBvd79593) */
+	if (size_lb) {
+		stfsm_write_fifo(fsm, (uint32_t *)p, size_lb);
+		p += size_lb;
+	}
+
+	/* Handle non-aligned size */
+	if (size_mop) {
+		memset(t, 0xff, write_mask + 1);	/* fill with 0xff's */
+		for (i = 0; i < size_mop; i++)
+			t[i] = *p++;
+
+		stfsm_write_fifo(fsm, tmp, write_mask + 1);
+	}
+
+	/* Start sequence */
+	stfsm_load_seq(fsm, seq);
+
+	/* Wait for sequence to finish */
+	stfsm_wait_seq(fsm);
+
+	/* Wait for completion */
+	ret = stfsm_wait_busy(fsm);
+	if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+		stfsm_s25fl_clear_status_reg(fsm);
+
+	/* Exit 32-bit address mode, if required */
+	if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR) {
+		stfsm_enter_32bit_addr(fsm, 0);
+		if (fsm->configuration & CFG_WRITE_EX_32BIT_ADDR_DELAY)
+			udelay(1);
+	}
+
+	return 0;
+}
+
+/*
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ */
+static int stfsm_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t *retlen, u_char *buf)
+{
+	struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+	uint32_t bytes;
+
+	dev_dbg(fsm->dev, "%s from 0x%08x, len %zd\n",
+		__func__, (u32)from, len);
+
+	mutex_lock(&fsm->lock);
+
+	while (len > 0) {
+		bytes = min_t(size_t, len, FLASH_PAGESIZE);
+
+		stfsm_read(fsm, buf, bytes, from);
+
+		buf += bytes;
+		from += bytes;
+		len -= bytes;
+
+		*retlen += bytes;
+	}
+
+	mutex_unlock(&fsm->lock);
+
+	return 0;
+}
+
+static int stfsm_erase_sector(struct stfsm *fsm, uint32_t offset)
+{
+	struct stfsm_seq *seq = &stfsm_seq_erase_sector;
+	int ret;
+
+	dev_dbg(fsm->dev, "erasing sector at 0x%08x\n", offset);
+
+	/* Enter 32-bit address mode, if required */
+	if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 1);
+
+	seq->addr1 = (offset >> 16) & 0xffff;
+	seq->addr2 = offset & 0xffff;
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	/* Wait for completion */
+	ret = stfsm_wait_busy(fsm);
+	if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+		stfsm_s25fl_clear_status_reg(fsm);
+
+	/* Exit 32-bit address mode, if required */
+	if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 0);
+
+	return ret;
+}
+
+static int stfsm_erase_chip(struct stfsm *fsm)
+{
+	const struct stfsm_seq *seq = &stfsm_seq_erase_chip;
+
+	dev_dbg(fsm->dev, "erasing chip\n");
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return stfsm_wait_busy(fsm);
+}
+
+/*
+ * Write an address range to the flash chip.  Data must be written in
+ * FLASH_PAGESIZE chunks.  The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int stfsm_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+			   size_t *retlen, const u_char *buf)
+{
+	struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+
+	u32 page_offs;
+	u32 bytes;
+	uint8_t *b = (uint8_t *)buf;
+	int ret = 0;
+
+	dev_dbg(fsm->dev, "%s to 0x%08x, len %zd\n", __func__, (u32)to, len);
+
+	/* Offset within page */
+	page_offs = to % FLASH_PAGESIZE;
+
+	mutex_lock(&fsm->lock);
+
+	while (len) {
+		/* Write up to page boundary */
+		bytes = min(FLASH_PAGESIZE - page_offs, len);
+
+		ret = stfsm_write(fsm, b, bytes, to);
+		if (ret)
+			goto out1;
+
+		b += bytes;
+		len -= bytes;
+		to += bytes;
+
+		/* We are now page-aligned */
+		page_offs = 0;
+
+		*retlen += bytes;
+
+	}
+
+out1:
+	mutex_unlock(&fsm->lock);
+
+	return ret;
+}
+
+/*
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors.  Return an error is there is a problem erasing.
+ */
+static int stfsm_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+	u32 addr, len;
+	int ret;
+
+	dev_dbg(fsm->dev, "%s at 0x%llx, len %lld\n", __func__,
+		(long long)instr->addr, (long long)instr->len);
+
+	addr = instr->addr;
+	len = instr->len;
+
+	mutex_lock(&fsm->lock);
+
+	/* Whole-chip erase? */
+	if (len == mtd->size) {
+		ret = stfsm_erase_chip(fsm);
+		if (ret)
+			goto out1;
+	} else {
+		while (len) {
+			ret = stfsm_erase_sector(fsm, addr);
+			if (ret)
+				goto out1;
+
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
+		}
+	}
+
+	mutex_unlock(&fsm->lock);
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+
+	return 0;
+
+out1:
+	instr->state = MTD_ERASE_FAILED;
+	mutex_unlock(&fsm->lock);
+
+	return ret;
+}
+
+static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *jedec)
+{
+	const struct stfsm_seq *seq = &stfsm_seq_read_jedec;
+	uint32_t tmp[2];
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_read_fifo(fsm, tmp, 8);
+
+	memcpy(jedec, tmp, 5);
+
+	stfsm_wait_seq(fsm);
+}
+
+static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
+{
+	struct flash_info	*info;
+	u16                     ext_jedec;
+	u32			jedec;
+	u8			id[5];
+
+	stfsm_read_jedec(fsm, id);
+
+	jedec     = id[0] << 16 | id[1] << 8 | id[2];
+	/*
+	 * JEDEC also defines an optional "extended device information"
+	 * string for after vendor-specific data, after the three bytes
+	 * we use here. Supporting some chips might require using it.
+	 */
+	ext_jedec = id[3] << 8  | id[4];
+
+	dev_dbg(fsm->dev, "JEDEC =  0x%08x [%02x %02x %02x %02x %02x]\n",
+		jedec, id[0], id[1], id[2], id[3], id[4]);
+
+	for (info = flash_types; info->name; info++) {
+		if (info->jedec_id == jedec) {
+			if (info->ext_id && info->ext_id != ext_jedec)
+				continue;
+			return info;
+		}
+	}
+	dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
+	return NULL;
+}
+
+static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
+{
+	int ret, timeout = 10;
+
+	/* Wait for controller to accept mode change */
+	while (--timeout) {
+		ret = readl(fsm->base + SPI_STA_MODE_CHANGE);
+		if (ret & 0x1)
+			break;
+		udelay(1);
+	}
+
+	if (!timeout)
+		return -EBUSY;
+
+	writel(mode, fsm->base + SPI_MODESELECT);
+
+	return 0;
+}
+
+static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
+{
+	uint32_t emi_freq;
+	uint32_t clk_div;
+
+	/* TODO: Make this dynamic */
+	emi_freq = STFSM_DEFAULT_EMI_FREQ;
+
+	/*
+	 * Calculate clk_div - values between 2 and 128
+	 * Multiple of 2, rounded up
+	 */
+	clk_div = 2 * DIV_ROUND_UP(emi_freq, 2 * spi_freq);
+	if (clk_div < 2)
+		clk_div = 2;
+	else if (clk_div > 128)
+		clk_div = 128;
+
+	/*
+	 * Determine a suitable delay for the IP to complete a change of
+	 * direction of the FIFO. The required delay is related to the clock
+	 * divider used. The following heuristics are based on empirical tests,
+	 * using a 100MHz EMI clock.
+	 */
+	if (clk_div <= 4)
+		fsm->fifo_dir_delay = 0;
+	else if (clk_div <= 10)
+		fsm->fifo_dir_delay = 1;
+	else
+		fsm->fifo_dir_delay = DIV_ROUND_UP(clk_div, 10);
+
+	dev_dbg(fsm->dev, "emi_clk = %uHZ, spi_freq = %uHZ, clk_div = %u\n",
+		emi_freq, spi_freq, clk_div);
+
+	writel(clk_div, fsm->base + SPI_CLOCKDIV);
+}
+
+static int stfsm_init(struct stfsm *fsm)
+{
+	int ret;
+
+	/* Perform a soft reset of the FSM controller */
+	writel(SEQ_CFG_SWRESET, fsm->base + SPI_FAST_SEQ_CFG);
+	udelay(1);
+	writel(0, fsm->base + SPI_FAST_SEQ_CFG);
+
+	/* Set clock to 'safe' frequency initially */
+	stfsm_set_freq(fsm, STFSM_FLASH_SAFE_FREQ);
+
+	/* Switch to FSM */
+	ret = stfsm_set_mode(fsm, SPI_MODESELECT_FSM);
+	if (ret)
+		return ret;
+
+	/* Set timing parameters */
+	writel(SPI_CFG_DEVICE_ST            |
+	       SPI_CFG_DEFAULT_MIN_CS_HIGH  |
+	       SPI_CFG_DEFAULT_CS_SETUPHOLD |
+	       SPI_CFG_DEFAULT_DATA_HOLD,
+	       fsm->base + SPI_CONFIGDATA);
+	writel(STFSM_DEFAULT_WR_TIME, fsm->base + SPI_STATUS_WR_TIME_REG);
+
+	/* Clear FIFO, just in case */
+	stfsm_clear_fifo(fsm);
+
+	return 0;
+}
+
+static void stfsm_fetch_platform_configs(struct platform_device *pdev)
+{
+	struct stfsm *fsm = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node;
+	struct regmap *regmap;
+	uint32_t boot_device_reg;
+	uint32_t boot_device_spi;
+	uint32_t boot_device;     /* Value we read from *boot_device_reg */
+	int ret;
+
+	/* Booting from SPI NOR Flash is the default */
+	fsm->booted_from_spi = true;
+
+	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(regmap))
+		goto boot_device_fail;
+
+	fsm->reset_signal = of_property_read_bool(np, "st,reset-signal");
+
+	fsm->reset_por = of_property_read_bool(np, "st,reset-por");
+
+	/* Where in the syscon the boot device information lives */
+	ret = of_property_read_u32(np, "st,boot-device-reg", &boot_device_reg);
+	if (ret)
+		goto boot_device_fail;
+
+	/* Boot device value when booted from SPI NOR */
+	ret = of_property_read_u32(np, "st,boot-device-spi", &boot_device_spi);
+	if (ret)
+		goto boot_device_fail;
+
+	ret = regmap_read(regmap, boot_device_reg, &boot_device);
+	if (ret)
+		goto boot_device_fail;
+
+	if (boot_device != boot_device_spi)
+		fsm->booted_from_spi = false;
+
+	return;
+
+boot_device_fail:
+	dev_warn(&pdev->dev,
+		 "failed to fetch boot device, assuming boot from SPI\n");
+}
+
+static int stfsm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
+	struct flash_info *info;
+	struct resource *res;
+	struct stfsm *fsm;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No DT found\n");
+		return -EINVAL;
+	}
+	ppdata.of_node = np;
+
+	fsm = devm_kzalloc(&pdev->dev, sizeof(*fsm), GFP_KERNEL);
+	if (!fsm)
+		return -ENOMEM;
+
+	fsm->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, fsm);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Resource not found\n");
+		return -ENODEV;
+	}
+
+	fsm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fsm->base)) {
+		dev_err(&pdev->dev,
+			"Failed to reserve memory region %pR\n", res);
+		return PTR_ERR(fsm->base);
+	}
+
+	mutex_init(&fsm->lock);
+
+	ret = stfsm_init(fsm);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialise FSM Controller\n");
+		return ret;
+	}
+
+	stfsm_fetch_platform_configs(pdev);
+
+	/* Detect SPI FLASH device */
+	info = stfsm_jedec_probe(fsm);
+	if (!info)
+		return -ENODEV;
+	fsm->info = info;
+
+	/* Use device size to determine address width */
+	if (info->sector_size * info->n_sectors > 0x1000000)
+		info->flags |= FLASH_FLAG_32BIT_ADDR;
+
+	/*
+	 * Configure READ/WRITE/ERASE sequences according to platform and
+	 * device flags.
+	 */
+	if (info->config) {
+		ret = info->config(fsm);
+		if (ret)
+			return ret;
+	} else {
+		ret = stfsm_prepare_rwe_seqs_default(fsm);
+		if (ret)
+			return ret;
+	}
+
+	fsm->mtd.name		= info->name;
+	fsm->mtd.dev.parent	= &pdev->dev;
+	fsm->mtd.type		= MTD_NORFLASH;
+	fsm->mtd.writesize	= 4;
+	fsm->mtd.writebufsize	= fsm->mtd.writesize;
+	fsm->mtd.flags		= MTD_CAP_NORFLASH;
+	fsm->mtd.size		= info->sector_size * info->n_sectors;
+	fsm->mtd.erasesize	= info->sector_size;
+
+	fsm->mtd._read  = stfsm_mtd_read;
+	fsm->mtd._write = stfsm_mtd_write;
+	fsm->mtd._erase = stfsm_mtd_erase;
+
+	dev_info(&pdev->dev,
+		"Found serial flash device: %s\n"
+		" size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+		info->name,
+		(long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+		fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
+
+	return mtd_device_parse_register(&fsm->mtd, NULL, &ppdata, NULL, 0);
+}
+
+static int stfsm_remove(struct platform_device *pdev)
+{
+	struct stfsm *fsm = platform_get_drvdata(pdev);
+
+	return mtd_device_unregister(&fsm->mtd);
+}
+
+static struct of_device_id stfsm_match[] = {
+	{ .compatible = "st,spi-fsm", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stfsm_match);
+
+static struct platform_driver stfsm_driver = {
+	.probe		= stfsm_probe,
+	.remove		= stfsm_remove,
+	.driver		= {
+		.name	= "st-spi-fsm",
+		.owner	= THIS_MODULE,
+		.of_match_table = stfsm_match,
+	},
+};
+module_platform_driver(stfsm_driver);
+
+MODULE_AUTHOR("Angus Clark <angus.clark@st.com>");
+MODULE_DESCRIPTION("ST SPI FSM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 4adc0374fb6b..487e64f411a5 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -30,7 +30,6 @@
 #include <asm/uaccess.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nftl.h>
 #include <linux/mtd/inftl.h>
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index d38b6460d505..018c75faadb3 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -55,10 +55,8 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 	int i, j;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c
index 45abed67f1ef..69f2112340b1 100644
--- a/drivers/mtd/lpddr/qinfo_probe.c
+++ b/drivers/mtd/lpddr/qinfo_probe.c
@@ -135,11 +135,8 @@ static int lpddr_chip_setup(struct map_info *map, struct lpddr_private *lpddr)
 {
 
 	lpddr->qinfo = kzalloc(sizeof(struct qinfo_chip), GFP_KERNEL);
-	if (!lpddr->qinfo) {
-		printk(KERN_WARNING "%s: no memory for LPDDR qinfo structure\n",
-				map->name);
+	if (!lpddr->qinfo)
 		return 0;
-	}
 
 	/* Get the ManuID */
 	lpddr->ManufactId = CMDVAL(map_read(map, map->pfow_base + PFOW_MANUFACTURER_ID));
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 310dc7c93425..fce23fe043f7 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -66,11 +66,11 @@ config MTD_PHYSMAP_BANKWIDTH
 	  used internally by the CFI drivers.
 
 config MTD_PHYSMAP_OF
-	tristate "Flash device in physical memory map based on OF description"
-	depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+	tristate "Memory device in physical memory map based on OF description"
+	depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_RAM)
 	help
-	  This provides a 'mapping' driver which allows the NOR Flash and
-	  ROM driver code to communicate with chips which are mapped
+	  This provides a 'mapping' driver which allows the NOR Flash, ROM
+	  and RAM driver code to communicate with chips which are mapped
 	  physically into the CPU's memory. The mapping description here is
 	  taken from OF device tree.
 
@@ -124,7 +124,7 @@ config MTD_NETSC520
 
 config MTD_TS5500
 	tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
-	depends on X86
+	depends on TS5500 || COMPILE_TEST
 	select MTD_JEDECPROBE
 	select MTD_CFI_AMDSTD
 	help
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 5434d8ded015..6ea51e549045 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -14,7 +14,6 @@
  * Licensed under the GPL-2 or later.
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 1adba86474a5..a4c477b9fdd6 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/gpio.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index 46d195fca942..5ab71f0e1bcd 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -31,7 +31,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index d6b2451eab1d..6a589f1e2880 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -16,7 +16,6 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/slab.h>
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index 93c507a6f862..7aa682cd4d7e 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
index 98bb5d5375d7..cadfbe051873 100644
--- a/drivers/mtd/maps/latch-addr-flash.c
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -10,7 +10,6 @@
  * kind, whether express or implied.
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 36da518915b5..eb0242e0b2d9 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index d11109762ac5..217c25d7381b 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -15,7 +15,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 10196f5a897d..d597e89f2692 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -23,7 +23,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
@@ -138,7 +137,6 @@ static int platram_probe(struct platform_device *pdev)
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
-		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
 		goto exit_error;
 	}
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 9aad854fe912..cb4d92eea9fe 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -13,7 +13,6 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c
index 93525121d69d..146b6047ed2b 100644
--- a/drivers/mtd/maps/rbtx4939-flash.c
+++ b/drivers/mtd/maps/rbtx4939-flash.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 3051c4c36240..b7a22a612a46 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -47,7 +47,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 39cc4181f025..b6f1aac3510c 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 5073cbc796d8..0b2ccb68c0d0 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -30,7 +30,6 @@
 #include <linux/blkpg.h>
 #include <linux/spinlock.h>
 #include <linux/hdreg.h>
-#include <linux/init.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 2147e733533b..7d4e7b9da3a1 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -324,6 +324,15 @@ static ssize_t mtdchar_write(struct file *file, const char __user *buf, size_t c
 		default:
 			ret = mtd_write(mtd, *ppos, len, &retlen, kbuf);
 		}
+
+		/*
+		 * Return -ENOSPC only if no data could be written at all.
+		 * Otherwise just return the number of bytes that actually
+		 * have been written.
+		 */
+		if ((ret == -ENOSPC) && (total_retlen))
+			break;
+
 		if (!ret) {
 			*ppos += retlen;
 			total_retlen += retlen;
@@ -889,25 +898,26 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 	case OTPGETREGIONINFO:
 	{
 		struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
+		size_t retlen;
 		if (!buf)
 			return -ENOMEM;
 		switch (mfi->mode) {
 		case MTD_FILE_MODE_OTP_FACTORY:
-			ret = mtd_get_fact_prot_info(mtd, buf, 4096);
+			ret = mtd_get_fact_prot_info(mtd, 4096, &retlen, buf);
 			break;
 		case MTD_FILE_MODE_OTP_USER:
-			ret = mtd_get_user_prot_info(mtd, buf, 4096);
+			ret = mtd_get_user_prot_info(mtd, 4096, &retlen, buf);
 			break;
 		default:
 			ret = -EINVAL;
 			break;
 		}
-		if (ret >= 0) {
+		if (!ret) {
 			if (cmd == OTPGETREGIONCOUNT) {
-				int nbr = ret / sizeof(struct otp_info);
+				int nbr = retlen / sizeof(struct otp_info);
 				ret = copy_to_user(argp, &nbr, sizeof(int));
 			} else
-				ret = copy_to_user(argp, buf, ret);
+				ret = copy_to_user(argp, buf, retlen);
 			if (ret)
 				ret = -EFAULT;
 		}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 34c0b16aed5c..d201feeb3ca6 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -883,14 +883,14 @@ EXPORT_SYMBOL_GPL(mtd_read_oob);
  * devices. The user data is one time programmable but the factory data is read
  * only.
  */
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len)
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf)
 {
 	if (!mtd->_get_fact_prot_info)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_get_fact_prot_info(mtd, buf, len);
+	return mtd->_get_fact_prot_info(mtd, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
 
@@ -906,14 +906,14 @@ int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 }
 EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
 
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len)
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf)
 {
 	if (!mtd->_get_user_prot_info)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_get_user_prot_info(mtd, buf, len);
+	return mtd->_get_user_prot_info(mtd, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
 
@@ -932,12 +932,22 @@ EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, u_char *buf)
 {
+	int ret;
+
 	*retlen = 0;
 	if (!mtd->_write_user_prot_reg)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+	ret = mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+	if (ret)
+		return ret;
+
+	/*
+	 * If no data could be written at all, we are out of memory and
+	 * must return -ENOSPC.
+	 */
+	return (*retlen) ? 0 : -ENOSPC;
 }
 EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 3c7d6d7623c1..1ca9aec141ff 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -150,11 +150,12 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 						 retlen, buf);
 }
 
-static int part_get_user_prot_info(struct mtd_info *mtd,
-		struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
+				   size_t *retlen, struct otp_info *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->_get_user_prot_info(part->master, buf, len);
+	return part->master->_get_user_prot_info(part->master, len, retlen,
+						 buf);
 }
 
 static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
@@ -165,11 +166,12 @@ static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 						 retlen, buf);
 }
 
-static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-		size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+				   size_t *retlen, struct otp_info *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->_get_fact_prot_info(part->master, buf, len);
+	return part->master->_get_fact_prot_info(part->master, len, retlen,
+						 buf);
 }
 
 static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a4bee41ad5cb..f1cf503517fd 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -460,6 +460,8 @@ config MTD_NAND_MXC
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
 	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on HAS_DMA
 	help
 	  Several Renesas SuperH CPU has FLCTL. This option enables support
 	  for NAND Flash using FLCTL.
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 8611eb4b45fc..4936e9e0002f 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -17,7 +17,6 @@
  */
 
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c36e9b84487c..4ce181a35bcd 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -430,7 +430,7 @@ err_dma:
 	dma_unmap_single(dma_dev->dev, phys_addr, len, dir);
 err_buf:
 	if (err != 0)
-		dev_warn(host->dev, "Fall back to CPU I/O\n");
+		dev_dbg(host->dev, "Fall back to CPU I/O\n");
 	return err;
 }
 
@@ -1220,6 +1220,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
 		goto err;
 	}
 
+	nand_chip->options |= NAND_NO_SUBPAGE_WRITE;
 	nand_chip->ecc.read_page = atmel_nand_pmecc_read_page;
 	nand_chip->ecc.write_page = atmel_nand_pmecc_write_page;
 
@@ -1659,8 +1660,8 @@ static void nfc_select_chip(struct mtd_info *mtd, int chip)
 		nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE);
 }
 
-static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr,
-		unsigned int *addr1234, unsigned int *cycle0)
+static int nfc_make_addr(struct mtd_info *mtd, int command, int column,
+		int page_addr, unsigned int *addr1234, unsigned int *cycle0)
 {
 	struct nand_chip *chip = mtd->priv;
 
@@ -1674,7 +1675,8 @@ static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr,
 	*addr1234 = 0;
 
 	if (column != -1) {
-		if (chip->options & NAND_BUSWIDTH_16)
+		if (chip->options & NAND_BUSWIDTH_16 &&
+				!nand_opcode_8bits(command))
 			column >>= 1;
 		addr_bytes[acycle++] = column & 0xff;
 		if (mtd->writesize > 512)
@@ -1787,8 +1789,8 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
 	}
 
 	if (do_addr)
-		acycle = nfc_make_addr(mtd, column, page_addr, &addr1234,
-				&cycle0);
+		acycle = nfc_make_addr(mtd, command, column, page_addr,
+				&addr1234, &cycle0);
 
 	nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr;
 	nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 2880d888cfc5..bc5c518828d2 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -11,7 +11,6 @@
 
 #include <linux/slab.h>
 #include <linux/gpio.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
@@ -308,7 +307,8 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if (this->options & NAND_BUSWIDTH_16)
+			if (this->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			ctx->write_byte(mtd, column);
 		}
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 94f55dbde995..b7a24946ca26 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -37,7 +37,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index f2f64addb5e8..4e66726da9aa 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -627,6 +627,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	struct cafe_priv *cafe;
 	uint32_t ctrl;
 	int err = 0;
+	int old_dma;
+	struct nand_buffers *nbuf;
 
 	/* Very old versions shared the same PCI ident for all three
 	   functions on the chip. Verify the class too... */
@@ -655,13 +657,6 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 		err = -ENOMEM;
 		goto out_free_mtd;
 	}
-	cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
-					  &cafe->dmaaddr, GFP_KERNEL);
-	if (!cafe->dmabuf) {
-		err = -ENOMEM;
-		goto out_ior;
-	}
-	cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
 
 	cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8);
 	if (!cafe->rs) {
@@ -721,7 +716,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 			  "CAFE NAND", mtd);
 	if (err) {
 		dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-		goto out_free_dma;
+		goto out_ior;
 	}
 
 	/* Disable master reset, enable NAND clock */
@@ -735,6 +730,32 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
 	cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
 
+	/* Enable NAND IRQ in global IRQ mask register */
+	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+	cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+		cafe_readl(cafe, GLOBAL_CTRL),
+		cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+	/* Do not use the DMA for the nand_scan_ident() */
+	old_dma = usedma;
+	usedma = 0;
+
+	/* Scan to find existence of the device */
+	if (nand_scan_ident(mtd, 2, NULL)) {
+		err = -ENXIO;
+		goto out_irq;
+	}
+
+	cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev,
+				2112 + sizeof(struct nand_buffers) +
+				mtd->writesize + mtd->oobsize,
+				&cafe->dmaaddr, GFP_KERNEL);
+	if (!cafe->dmabuf) {
+		err = -ENOMEM;
+		goto out_irq;
+	}
+	cafe->nand.buffers = nbuf = (void *)cafe->dmabuf + 2112;
+
 	/* Set up DMA address */
 	cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
 	if (sizeof(cafe->dmaaddr) > 4)
@@ -746,16 +767,13 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
 		cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
 
-	/* Enable NAND IRQ in global IRQ mask register */
-	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
-	cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
-		cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+	/* this driver does not need the @ecccalc and @ecccode */
+	nbuf->ecccalc = NULL;
+	nbuf->ecccode = NULL;
+	nbuf->databuf = (uint8_t *)(nbuf + 1);
 
-	/* Scan to find existence of the device */
-	if (nand_scan_ident(mtd, 2, NULL)) {
-		err = -ENXIO;
-		goto out_irq;
-	}
+	/* Restore the DMA flag */
+	usedma = old_dma;
 
 	cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
 	if (mtd->writesize == 2048)
@@ -773,7 +791,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	} else {
 		printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
 		       mtd->writesize);
-		goto out_irq;
+		goto out_free_dma;
 	}
 	cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 	cafe->nand.ecc.size = mtd->writesize;
@@ -790,7 +808,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 
 	err = nand_scan_tail(mtd);
 	if (err)
-		goto out_irq;
+		goto out_free_dma;
 
 	pci_set_drvdata(pdev, mtd);
 
@@ -799,12 +817,15 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 
 	goto out;
 
+ out_free_dma:
+	dma_free_coherent(&cafe->pdev->dev,
+			2112 + sizeof(struct nand_buffers) +
+			mtd->writesize + mtd->oobsize,
+			cafe->dmabuf, cafe->dmaaddr);
  out_irq:
 	/* Disable NAND IRQ in global IRQ mask register */
 	cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
 	free_irq(pdev->irq, mtd);
- out_free_dma:
-	dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
  out_ior:
 	pci_iounmap(pdev, cafe->mmio);
  out_free_mtd:
@@ -824,7 +845,10 @@ static void cafe_nand_remove(struct pci_dev *pdev)
 	nand_release(mtd);
 	free_rs(cafe->rs);
 	pci_iounmap(pdev, cafe->mmio);
-	dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+	dma_free_coherent(&cafe->pdev->dev,
+			2112 + sizeof(struct nand_buffers) +
+			mtd->writesize + mtd->oobsize,
+			cafe->dmabuf, cafe->dmaaddr);
 	kfree(mtd);
 }
 
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8eb6a36f125a..4615d79fc93f 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -24,7 +24,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index babb02c4b220..35cb17f57800 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -30,24 +30,6 @@ struct denali_dt {
 	struct clk		*clk;
 };
 
-static void __iomem *request_and_map(struct device *dev,
-				     const struct resource *res)
-{
-	void __iomem *ptr;
-
-	if (!devm_request_mem_region(dev, res->start, resource_size(res),
-				     "denali-dt")) {
-		dev_err(dev, "unable to request %s\n", res->name);
-		return NULL;
-	}
-
-	ptr = devm_ioremap_nocache(dev, res->start, resource_size(res));
-	if (!ptr)
-		dev_err(dev, "ioremap_nocache of %s failed!", res->name);
-
-	return ptr;
-}
-
 static const struct of_device_id denali_nand_dt_ids[] = {
 		{ .compatible = "denali,denali-nand-dt" },
 		{ /* sentinel */ }
@@ -78,13 +60,6 @@ static int denali_dt_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 	denali = &dt->denali;
 
-	denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
-	nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
-	if (!denali_reg || !nand_data) {
-		dev_err(&ofdev->dev, "resources not completely defined\n");
-		return -EINVAL;
-	}
-
 	denali->platform = DT;
 	denali->dev = &ofdev->dev;
 	denali->irq = platform_get_irq(ofdev, 0);
@@ -93,13 +68,15 @@ static int denali_dt_probe(struct platform_device *ofdev)
 		return denali->irq;
 	}
 
-	denali->flash_reg = request_and_map(&ofdev->dev, denali_reg);
-	if (!denali->flash_reg)
-		return -ENOMEM;
+	denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
+	denali->flash_reg = devm_ioremap_resource(&ofdev->dev, denali_reg);
+	if (IS_ERR(denali->flash_reg))
+		return PTR_ERR(denali->flash_reg);
 
-	denali->flash_mem = request_and_map(&ofdev->dev, nand_data);
-	if (!denali->flash_mem)
-		return -ENOMEM;
+	nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
+	denali->flash_mem = devm_ioremap_resource(&ofdev->dev, nand_data);
+	if (IS_ERR(denali->flash_mem))
+		return PTR_ERR(denali->flash_mem);
 
 	if (!of_property_read_u32(ofdev->dev.of_node,
 		"dma-mask", (u32 *)&denali_dma_mask)) {
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index fec31d71b84e..f68a7bccecdc 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -698,7 +698,8 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if (this->options & NAND_BUSWIDTH_16)
+			if (this->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			WriteDOC(column, docptr, Mplus_FlashAddress);
 		}
@@ -1438,7 +1439,7 @@ static int __init doc_probe(unsigned long physadr)
 	int reg, len, numchips;
 	int ret = 0;
 
-	if (!request_mem_region(physadr, DOC_IOREMAP_LEN, NULL))
+	if (!request_mem_region(physadr, DOC_IOREMAP_LEN, "DiskOnChip"))
 		return -EBUSY;
 	virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
 	if (!virtadr) {
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index bcf60800c3ce..ec549cd9849f 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -24,7 +24,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 50d9161c4faf..cb45d2f8e208 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -22,7 +22,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 8e6148aa4539..117ce333fdd4 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -18,7 +18,6 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index ca6369fe91ff..bb77f750e75a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -27,6 +27,7 @@
 #include <linux/of_device.h>
 #include <linux/of_mtd.h>
 #include "gpmi-nand.h"
+#include "bch-regs.h"
 
 /* Resource names for the GPMI NAND driver. */
 #define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
@@ -985,7 +986,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	int           ret;
 
 	dev_dbg(this->dev, "page number is : %d\n", page);
-	ret = read_page_prepare(this, buf, mtd->writesize,
+	ret = read_page_prepare(this, buf, nfc_geo->payload_size,
 					this->payload_virt, this->payload_phys,
 					nfc_geo->payload_size,
 					&payload_virt, &payload_phys);
@@ -999,7 +1000,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 
 	/* go! */
 	ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
-	read_page_end(this, buf, mtd->writesize,
+	read_page_end(this, buf, nfc_geo->payload_size,
 			this->payload_virt, this->payload_phys,
 			nfc_geo->payload_size,
 			payload_virt, payload_phys);
@@ -1041,7 +1042,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 	}
 
-	read_page_swap_end(this, buf, mtd->writesize,
+	read_page_swap_end(this, buf, nfc_geo->payload_size,
 			this->payload_virt, this->payload_phys,
 			nfc_geo->payload_size,
 			payload_virt, payload_phys);
@@ -1049,6 +1050,90 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	return max_bitflips;
 }
 
+/* Fake a virtual small page for the subpage read */
+static int gpmi_ecc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t offs, uint32_t len, uint8_t *buf, int page)
+{
+	struct gpmi_nand_data *this = chip->priv;
+	void __iomem *bch_regs = this->resources.bch_regs;
+	struct bch_geometry old_geo = this->bch_geometry;
+	struct bch_geometry *geo = &this->bch_geometry;
+	int size = chip->ecc.size; /* ECC chunk size */
+	int meta, n, page_size;
+	u32 r1_old, r2_old, r1_new, r2_new;
+	unsigned int max_bitflips;
+	int first, last, marker_pos;
+	int ecc_parity_size;
+	int col = 0;
+
+	/* The size of ECC parity */
+	ecc_parity_size = geo->gf_len * geo->ecc_strength / 8;
+
+	/* Align it with the chunk size */
+	first = offs / size;
+	last = (offs + len - 1) / size;
+
+	/*
+	 * Find the chunk which contains the Block Marker. If this chunk is
+	 * in the range of [first, last], we have to read out the whole page.
+	 * Why? since we had swapped the data at the position of Block Marker
+	 * to the metadata which is bound with the chunk 0.
+	 */
+	marker_pos = geo->block_mark_byte_offset / size;
+	if (last >= marker_pos && first <= marker_pos) {
+		dev_dbg(this->dev, "page:%d, first:%d, last:%d, marker at:%d\n",
+				page, first, last, marker_pos);
+		return gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+	}
+
+	meta = geo->metadata_size;
+	if (first) {
+		col = meta + (size + ecc_parity_size) * first;
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, col, -1);
+
+		meta = 0;
+		buf = buf + first * size;
+	}
+
+	/* Save the old environment */
+	r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0);
+	r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	/* change the BCH registers and bch_geometry{} */
+	n = last - first + 1;
+	page_size = meta + (size + ecc_parity_size) * n;
+
+	r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS |
+			BM_BCH_FLASH0LAYOUT0_META_SIZE);
+	r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1)
+			| BF_BCH_FLASH0LAYOUT0_META_SIZE(meta);
+	writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+	r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE;
+	r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size);
+	writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	geo->ecc_chunk_count = n;
+	geo->payload_size = n * size;
+	geo->page_size = page_size;
+	geo->auxiliary_status_offset = ALIGN(meta, 4);
+
+	dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n",
+		page, offs, len, col, first, n, page_size);
+
+	/* Read the subpage now */
+	this->swap_block_mark = false;
+	max_bitflips = gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+
+	/* Restore */
+	writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0);
+	writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1);
+	this->bch_geometry = old_geo;
+	this->swap_block_mark = true;
+
+	return max_bitflips;
+}
+
 static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 				const uint8_t *buf, int oob_required)
 {
@@ -1566,6 +1651,17 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	ecc->layout	= &gpmi_hw_ecclayout;
 
 	/*
+	 * We only enable the subpage read when:
+	 *  (1) the chip is imx6, and
+	 *  (2) the size of the ECC parity is byte aligned.
+	 */
+	if (GPMI_IS_MX6Q(this) &&
+		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+		ecc->read_subpage = gpmi_ecc_read_subpage;
+		chip->options |= NAND_SUBPAGE_READ;
+	}
+
+	/*
 	 * Can we enable the extra features? such as EDO or Sync mode.
 	 *
 	 * We do not check the return value now. That's means if we fail in
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 31ee7cfbc12b..e78841a2dcc3 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -30,7 +30,6 @@
 #include <linux/gfp.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index e9a4835c4dd9..dba262bf766f 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1501,6 +1501,8 @@ static int mxcnd_probe(struct platform_device *pdev)
 	init_completion(&host->op_completion);
 
 	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
 
 	/*
 	 * Use host->devtype_data->irq_control() here instead of irq_control()
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 9715a7ba164a..9d01c4df838c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -589,7 +589,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	/* Serially input address */
 	if (column != -1) {
 		/* Adjust columns for 16 bit buswidth */
-		if (chip->options & NAND_BUSWIDTH_16)
+		if (chip->options & NAND_BUSWIDTH_16 &&
+				!nand_opcode_8bits(command))
 			column >>= 1;
 		chip->cmd_ctrl(mtd, column, ctrl);
 		ctrl &= ~NAND_CTRL_CHANGE;
@@ -680,7 +681,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if (chip->options & NAND_BUSWIDTH_16)
+			if (chip->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			chip->cmd_ctrl(mtd, column, ctrl);
 			ctrl &= ~NAND_CTRL_CHANGE;
@@ -1160,9 +1162,11 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
  * @data_offs: offset of requested data within the page
  * @readlen: data length
  * @bufpoi: buffer to store read data
+ * @page: page number to read
  */
 static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+			int page)
 {
 	int start_step, end_step, num_steps;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -1170,13 +1174,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 	int data_col_addr, i, gaps = 0;
 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
-	int index = 0;
+	int index;
 	unsigned int max_bitflips = 0;
 
 	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
 	end_step = (data_offs + readlen - 1) / chip->ecc.size;
 	num_steps = end_step - start_step + 1;
+	index = start_step * chip->ecc.bytes;
 
 	/* Data size aligned to ECC ecc.size */
 	datafrag_len = num_steps * chip->ecc.size;
@@ -1213,8 +1218,6 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 		 * Send the command to read the particular ECC bytes take care
 		 * about buswidth alignment in read_buf.
 		 */
-		index = start_step * chip->ecc.bytes;
-
 		aligned_pos = eccpos[index] & ~(busw - 1);
 		aligned_len = eccfrag_len;
 		if (eccpos[index] & (busw - 1))
@@ -1538,7 +1541,8 @@ read_retry:
 			else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
 				 !oob)
 				ret = chip->ecc.read_subpage(mtd, chip,
-							col, bytes, bufpoi);
+							col, bytes, bufpoi,
+							page);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
 							  oob_required, page);
@@ -2000,7 +2004,7 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
 			oob += chip->ecc.prepad;
 		}
 
-		chip->read_buf(mtd, oob, eccbytes);
+		chip->write_buf(mtd, oob, eccbytes);
 		oob += eccbytes;
 
 		if (chip->ecc.postpad) {
@@ -3063,7 +3067,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 					int *busw)
 {
 	struct nand_onfi_params *p = &chip->onfi_params;
-	int i;
+	int i, j;
 	int val;
 
 	/* Try ONFI for unknown chip or LP */
@@ -3072,18 +3076,10 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
 		return 0;
 
-	/*
-	 * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
-	 * with NAND_BUSWIDTH_16
-	 */
-	if (chip->options & NAND_BUSWIDTH_16) {
-		pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
-		return 0;
-	}
-
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
 	for (i = 0; i < 3; i++) {
-		chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+		for (j = 0; j < sizeof(*p); j++)
+			((uint8_t *)p)[j] = chip->read_byte(mtd);
 		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
 				le16_to_cpu(p->crc)) {
 			break;
@@ -3169,6 +3165,87 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /*
+ * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
+					int *busw)
+{
+	struct nand_jedec_params *p = &chip->jedec_params;
+	struct jedec_ecc_info *ecc;
+	int val;
+	int i, j;
+
+	/* Try JEDEC for unknown chip or LP */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1);
+	if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' ||
+		chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' ||
+		chip->read_byte(mtd) != 'C')
+		return 0;
+
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1);
+	for (i = 0; i < 3; i++) {
+		for (j = 0; j < sizeof(*p); j++)
+			((uint8_t *)p)[j] = chip->read_byte(mtd);
+
+		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) ==
+				le16_to_cpu(p->crc))
+			break;
+	}
+
+	if (i == 3) {
+		pr_err("Could not find valid JEDEC parameter page; aborting\n");
+		return 0;
+	}
+
+	/* Check version */
+	val = le16_to_cpu(p->revision);
+	if (val & (1 << 2))
+		chip->jedec_version = 10;
+	else if (val & (1 << 1))
+		chip->jedec_version = 1; /* vendor specific version */
+
+	if (!chip->jedec_version) {
+		pr_info("unsupported JEDEC version: %d\n", val);
+		return 0;
+	}
+
+	sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+	sanitize_string(p->model, sizeof(p->model));
+	if (!mtd->name)
+		mtd->name = p->model;
+
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+	/* Please reference to the comment for nand_flash_detect_onfi. */
+	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize *= mtd->writesize;
+
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+	/* Please reference to the comment for nand_flash_detect_onfi. */
+	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	chip->bits_per_cell = p->bits_per_cell;
+
+	if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
+		*busw = NAND_BUSWIDTH_16;
+	else
+		*busw = 0;
+
+	/* ECC info */
+	ecc = &p->ecc_info[0];
+
+	if (ecc->codeword_size >= 9) {
+		chip->ecc_strength_ds = ecc->ecc_bits;
+		chip->ecc_step_ds = 1 << ecc->codeword_size;
+	} else {
+		pr_warn("Invalid codeword size\n");
+	}
+
+	return 1;
+}
+
+/*
  * nand_id_has_period - Check if an ID string has a given wraparound period
  * @id_data: the ID string
  * @arrlen: the length of the @id_data array
@@ -3474,10 +3551,10 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
  */
 static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 						  struct nand_chip *chip,
-						  int busw,
 						  int *maf_id, int *dev_id,
 						  struct nand_flash_dev *type)
 {
+	int busw;
 	int i, maf_idx;
 	u8 id_data[8];
 
@@ -3533,6 +3610,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 		/* Check is chip is ONFI compliant */
 		if (nand_flash_detect_onfi(mtd, chip, &busw))
 			goto ident_done;
+
+		/* Check if the chip is JEDEC compliant */
+		if (nand_flash_detect_jedec(mtd, chip, &busw))
+			goto ident_done;
 	}
 
 	if (!type->name)
@@ -3612,8 +3693,17 @@ ident_done:
 
 	pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
 		*maf_id, *dev_id);
-	pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
-		chip->onfi_version ? chip->onfi_params.model : type->name);
+
+	if (chip->onfi_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->onfi_params.model);
+	else if (chip->jedec_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->jedec_params.model);
+	else
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				type->name);
+
 	pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
 		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
 		mtd->writesize, mtd->oobsize);
@@ -3634,18 +3724,16 @@ ident_done:
 int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		    struct nand_flash_dev *table)
 {
-	int i, busw, nand_maf_id, nand_dev_id;
+	int i, nand_maf_id, nand_dev_id;
 	struct nand_chip *chip = mtd->priv;
 	struct nand_flash_dev *type;
 
-	/* Get buswidth to select the correct functions */
-	busw = chip->options & NAND_BUSWIDTH_16;
 	/* Set the default functions */
-	nand_set_defaults(chip, busw);
+	nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
 
 	/* Read the flash type */
-	type = nand_get_flash_type(mtd, chip, busw,
-				&nand_maf_id, &nand_dev_id, table);
+	type = nand_get_flash_type(mtd, chip, &nand_maf_id,
+				   &nand_dev_id, table);
 
 	if (IS_ERR(type)) {
 		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -3696,15 +3784,26 @@ int nand_scan_tail(struct mtd_info *mtd)
 	int i;
 	struct nand_chip *chip = mtd->priv;
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct nand_buffers *nbuf;
 
 	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
 	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
 			!(chip->bbt_options & NAND_BBT_USE_FLASH));
 
-	if (!(chip->options & NAND_OWN_BUFFERS))
-		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
-	if (!chip->buffers)
-		return -ENOMEM;
+	if (!(chip->options & NAND_OWN_BUFFERS)) {
+		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+				+ mtd->oobsize * 3, GFP_KERNEL);
+		if (!nbuf)
+			return -ENOMEM;
+		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+
+		chip->buffers = nbuf;
+	} else {
+		if (!chip->buffers)
+			return -ENOMEM;
+	}
 
 	/* Set the internal oob buffer location, just after the page data */
 	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
@@ -3825,7 +3924,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	case NAND_ECC_SOFT_BCH:
 		if (!mtd_nand_has_bch()) {
-			pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
+			pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
 			BUG();
 		}
 		ecc->calculate = nand_bch_calculate_ecc;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index daa2faacd7d0..3d7c89fc1031 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -43,6 +43,9 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"TC58NVG6D2 64G 3.3V 8-bit",
 		{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
 		  SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+	{"SDTNRGAMA 64G 3.3V 8-bit",
+		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
+		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 9ee09a8177c6..e8a5fffd6ab2 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -152,7 +151,8 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	if (column != -1 || page_addr != -1) {
 
 		if (column != -1) {
-			if (chip->options & NAND_BUSWIDTH_16)
+			if (chip->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			write_addr_reg(nand, column);
 			write_addr_reg(nand, column >> 8 | ENDADDR);
@@ -225,7 +225,7 @@ static void nuc900_nand_enable(struct nuc900_nand *nand)
 	val = __raw_readl(nand->reg + REG_FMICSR);
 
 	if (!(val & NAND_EN))
-		__raw_writel(val | NAND_EN, REG_FMICSR);
+		__raw_writel(val | NAND_EN, nand->reg + REG_FMICSR);
 
 	val = __raw_readl(nand->reg + REG_SMCSR);
 
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index bf642ceef681..1ff49b80bdaf 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -118,14 +118,9 @@
 
 #define OMAP24XX_DMA_GPMC		4
 
-#define BCH8_MAX_ERROR		8	/* upto 8 bit correctable */
-#define BCH4_MAX_ERROR		4	/* upto 4 bit correctable */
-
 #define SECTOR_BYTES		512
 /* 4 bit padding to make byte aligned, 56 = 52 + 4 */
 #define BCH4_BIT_PAD		4
-#define BCH8_ECC_MAX		((SECTOR_BYTES + BCH8_ECC_OOB_BYTES) * 8)
-#define BCH4_ECC_MAX		((SECTOR_BYTES + BCH4_ECC_OOB_BYTES) * 8)
 
 /* GPMC ecc engine settings for read */
 #define BCH_WRAPMODE_1		1	/* BCH wrap mode 1 */
@@ -159,7 +154,7 @@ struct omap_nand_info {
 
 	int				gpmc_cs;
 	unsigned long			phys_base;
-	unsigned long			mem_size;
+	enum omap_ecc			ecc_opt;
 	struct completion		comp;
 	struct dma_chan			*dma;
 	int				gpmc_irq_fifo;
@@ -172,7 +167,6 @@ struct omap_nand_info {
 	int					buf_len;
 	struct gpmc_nand_regs		reg;
 	/* fields specific for BCHx_HW ECC scheme */
-	bool				is_elm_used;
 	struct device			*elm_dev;
 	struct device_node		*of_node;
 };
@@ -1043,9 +1037,8 @@ static int omap_dev_ready(struct mtd_info *mtd)
 	}
 }
 
-#if defined(CONFIG_MTD_NAND_ECC_BCH) || defined(CONFIG_MTD_NAND_OMAP_BCH)
 /**
- * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction
+ * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
  * @mtd: MTD device structure
  * @mode: Read/Write mode
  *
@@ -1056,50 +1049,73 @@ static int omap_dev_ready(struct mtd_info *mtd)
  * eccsize0 = 0  (no additional protected byte in spare area)
  * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
  */
-static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
+static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 {
-	int nerrors;
+	unsigned int bch_type;
 	unsigned int dev_width, nsectors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
+	enum omap_ecc ecc_opt = info->ecc_opt;
 	struct nand_chip *chip = mtd->priv;
 	u32 val, wr_mode;
 	unsigned int ecc_size1, ecc_size0;
 
-	/* Using wrapping mode 6 for writing */
-	wr_mode = BCH_WRAPMODE_6;
-
-	/*
-	 * ECC engine enabled for valid ecc_size0 nibbles
-	 * and disabled for ecc_size1 nibbles.
-	 */
-	ecc_size0 = BCH_ECC_SIZE0;
-	ecc_size1 = BCH_ECC_SIZE1;
-
-	/* Perform ecc calculation on 512-byte sector */
-	nsectors = 1;
-
-	/* Update number of error correction */
-	nerrors = info->nand.ecc.strength;
-
-	/* Multi sector reading/writing for NAND flash with page size < 4096 */
-	if (info->is_elm_used && (mtd->writesize <= 4096)) {
+	/* GPMC configurations for calculating ECC */
+	switch (ecc_opt) {
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+		bch_type = 0;
+		nsectors = 1;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH4_CODE_HW:
+		bch_type = 0;
+		nsectors = chip->ecc.steps;
 		if (mode == NAND_ECC_READ) {
-			/* Using wrapping mode 1 for reading */
-			wr_mode = BCH_WRAPMODE_1;
-
-			/*
-			 * ECC engine enabled for ecc_size0 nibbles
-			 * and disabled for ecc_size1 nibbles.
-			 */
-			ecc_size0 = (nerrors == 8) ?
-				BCH8R_ECC_SIZE0 : BCH4R_ECC_SIZE0;
-			ecc_size1 = (nerrors == 8) ?
-				BCH8R_ECC_SIZE1 : BCH4R_ECC_SIZE1;
+			wr_mode	  = BCH_WRAPMODE_1;
+			ecc_size0 = BCH4R_ECC_SIZE0;
+			ecc_size1 = BCH4R_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
 		}
-
-		/* Perform ecc calculation for one page (< 4096) */
-		nsectors = info->nand.ecc.steps;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		bch_type = 1;
+		nsectors = 1;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		bch_type = 1;
+		nsectors = chip->ecc.steps;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_1;
+			ecc_size0 = BCH8R_ECC_SIZE0;
+			ecc_size1 = BCH8R_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	default:
+		return;
 	}
 
 	writel(ECC1, info->reg.gpmc_ecc_control);
@@ -1112,7 +1128,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 
 	/* BCH configuration */
 	val = ((1                        << 16) | /* enable BCH */
-	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (bch_type		 << 12) | /* BCH4/BCH8/BCH16 */
 	       (wr_mode                  <<  8) | /* wrap mode */
 	       (dev_width                <<  7) | /* bus width */
 	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
@@ -1124,132 +1140,40 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 	/* Clear ecc and enable bits */
 	writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 }
-#endif
-
-#ifdef CONFIG_MTD_NAND_ECC_BCH
-/**
- * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes
- * @mtd: MTD device structure
- * @dat: The pointer to data on which ecc is computed
- * @ecc_code: The ecc_code buffer
- */
-static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
-				    u_char *ecc_code)
-{
-	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
-						   mtd);
-	unsigned long nsectors, val1, val2;
-	int i;
-
-	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
-
-	for (i = 0; i < nsectors; i++) {
 
-		/* Read hw-computed remainder */
-		val1 = readl(info->reg.gpmc_bch_result0[i]);
-		val2 = readl(info->reg.gpmc_bch_result1[i]);
-
-		/*
-		 * Add constant polynomial to remainder, in order to get an ecc
-		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
-		 * left-justify the resulting polynomial.
-		 */
-		*ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
-		*ecc_code++ = 0x13 ^ ((val2 >>  4) & 0xFF);
-		*ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
-		*ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
-		*ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
-		*ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
-		*ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
-	}
-
-	return 0;
-}
+static u8  bch4_polynomial[] = {0x28, 0x13, 0xcc, 0x39, 0x96, 0xac, 0x7f};
+static u8  bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
+				0x97, 0x79, 0xe5, 0x24, 0xb5};
 
 /**
- * omap3_calculate_ecc_bch8 - Generate 13 bytes of ECC bytes
- * @mtd: MTD device structure
- * @dat: The pointer to data on which ecc is computed
- * @ecc_code: The ecc_code buffer
- */
-static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
-				    u_char *ecc_code)
-{
-	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
-						   mtd);
-	unsigned long nsectors, val1, val2, val3, val4;
-	int i;
-
-	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
-
-	for (i = 0; i < nsectors; i++) {
-
-		/* Read hw-computed remainder */
-		val1 = readl(info->reg.gpmc_bch_result0[i]);
-		val2 = readl(info->reg.gpmc_bch_result1[i]);
-		val3 = readl(info->reg.gpmc_bch_result2[i]);
-		val4 = readl(info->reg.gpmc_bch_result3[i]);
-
-		/*
-		 * Add constant polynomial to remainder, in order to get an ecc
-		 * sequence of 0xFFs for a buffer filled with 0xFFs.
-		 */
-		*ecc_code++ = 0xef ^ (val4 & 0xFF);
-		*ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
-		*ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
-		*ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
-		*ecc_code++ = 0xed ^ (val3 & 0xFF);
-		*ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
-		*ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
-		*ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
-		*ecc_code++ = 0x97 ^ (val2 & 0xFF);
-		*ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
-		*ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
-		*ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
-		*ecc_code++ = 0xb5 ^ (val1 & 0xFF);
-	}
-
-	return 0;
-}
-#endif /* CONFIG_MTD_NAND_ECC_BCH */
-
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
-/**
- * omap3_calculate_ecc_bch - Generate bytes of ECC bytes
+ * omap_calculate_ecc_bch - Generate bytes of ECC bytes
  * @mtd:	MTD device structure
  * @dat:	The pointer to data on which ecc is computed
  * @ecc_code:	The ecc_code buffer
  *
  * Support calculating of BCH4/8 ecc vectors for the page
  */
-static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
-				    u_char *ecc_code)
+static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_calc)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
+	int eccbytes	= info->nand.ecc.bytes;
+	struct gpmc_nand_regs	*gpmc_regs = &info->reg;
+	u8 *ecc_code;
 	unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
-	int i, eccbchtsel;
+	int i;
 
 	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
-	/*
-	 * find BCH scheme used
-	 * 0 -> BCH4
-	 * 1 -> BCH8
-	 */
-	eccbchtsel = ((readl(info->reg.gpmc_ecc_config) >> 12) & 0x3);
-
 	for (i = 0; i < nsectors; i++) {
-
-		/* Read hw-computed remainder */
-		bch_val1 = readl(info->reg.gpmc_bch_result0[i]);
-		bch_val2 = readl(info->reg.gpmc_bch_result1[i]);
-		if (eccbchtsel) {
-			bch_val3 = readl(info->reg.gpmc_bch_result2[i]);
-			bch_val4 = readl(info->reg.gpmc_bch_result3[i]);
-		}
-
-		if (eccbchtsel) {
-			/* BCH8 ecc scheme */
+		ecc_code = ecc_calc;
+		switch (info->ecc_opt) {
+		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		case OMAP_ECC_BCH8_CODE_HW:
+			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+			bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+			bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
 			*ecc_code++ = (bch_val4 & 0xFF);
 			*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
 			*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
@@ -1263,14 +1187,11 @@ static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
 			*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
 			*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
 			*ecc_code++ = (bch_val1 & 0xFF);
-			/*
-			 * Setting 14th byte to zero to handle
-			 * erased page & maintain compatibility
-			 * with RBL
-			 */
-			*ecc_code++ = 0x0;
-		} else {
-			/* BCH4 ecc scheme */
+			break;
+		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+		case OMAP_ECC_BCH4_CODE_HW:
+			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
 			*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
 			*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
 			*ecc_code++ = ((bch_val2 & 0xF) << 4) |
@@ -1279,12 +1200,38 @@ static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
 			*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
 			*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
 			*ecc_code++ = ((bch_val1 & 0xF) << 4);
-			/*
-			 * Setting 8th byte to zero to handle
-			 * erased page
-			 */
-			*ecc_code++ = 0x0;
+			break;
+		default:
+			return -EINVAL;
 		}
+
+		/* ECC scheme specific syndrome customizations */
+		switch (info->ecc_opt) {
+		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+			/* Add constant polynomial to remainder, so that
+			 * ECC of blank pages results in 0x0 on reading back */
+			for (i = 0; i < eccbytes; i++)
+				ecc_calc[i] ^= bch4_polynomial[i];
+			break;
+		case OMAP_ECC_BCH4_CODE_HW:
+			/* Set  8th ECC byte as 0x0 for ROM compatibility */
+			ecc_calc[eccbytes - 1] = 0x0;
+			break;
+		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+			/* Add constant polynomial to remainder, so that
+			 * ECC of blank pages results in 0x0 on reading back */
+			for (i = 0; i < eccbytes; i++)
+				ecc_calc[i] ^= bch8_polynomial[i];
+			break;
+		case OMAP_ECC_BCH8_CODE_HW:
+			/* Set 14th ECC byte as 0x0 for ROM compatibility */
+			ecc_calc[eccbytes - 1] = 0x0;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+	ecc_calc += eccbytes;
 	}
 
 	return 0;
@@ -1329,6 +1276,7 @@ static int erased_sector_bitflips(u_char *data, u_char *oob,
 	return flip_bits;
 }
 
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
 /**
  * omap_elm_correct_data - corrects page data area in case error reported
  * @mtd:	MTD device structure
@@ -1337,55 +1285,46 @@ static int erased_sector_bitflips(u_char *data, u_char *oob,
  * @calc_ecc:	ecc read from HW ECC registers
  *
  * Calculated ecc vector reported as zero in case of non-error pages.
- * In case of error/erased pages non-zero error vector is reported.
- * In case of non-zero ecc vector, check read_ecc at fixed offset
- * (x = 13/7 in case of BCH8/4 == 0) to find page programmed or not.
- * To handle bit flips in this data, count the number of 0's in
- * read_ecc[x] and check if it greater than 4. If it is less, it is
- * programmed page, else erased page.
- *
- * 1. If page is erased, check with standard ecc vector (ecc vector
- * for erased page to find any bit flip). If check fails, bit flip
- * is present in erased page. Count the bit flips in erased page and
- * if it falls under correctable level, report page with 0xFF and
- * update the correctable bit information.
- * 2. If error is reported on programmed page, update elm error
- * vector and correct the page with ELM error correction routine.
- *
+ * In case of non-zero ecc vector, first filter out erased-pages, and
+ * then process data via ELM to detect bit-flips.
  */
 static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 				u_char *read_ecc, u_char *calc_ecc)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 			mtd);
+	struct nand_ecc_ctrl *ecc = &info->nand.ecc;
 	int eccsteps = info->nand.ecc.steps;
 	int i , j, stat = 0;
-	int eccsize, eccflag, ecc_vector_size;
+	int eccflag, actual_eccbytes;
 	struct elm_errorvec err_vec[ERROR_VECTOR_MAX];
 	u_char *ecc_vec = calc_ecc;
 	u_char *spare_ecc = read_ecc;
 	u_char *erased_ecc_vec;
-	enum bch_ecc type;
+	u_char *buf;
+	int bitflip_count;
 	bool is_error_reported = false;
+	u32 bit_pos, byte_pos, error_max, pos;
+	int err;
 
-	/* Initialize elm error vector to zero */
-	memset(err_vec, 0, sizeof(err_vec));
-
-	if (info->nand.ecc.strength == BCH8_MAX_ERROR) {
-		type = BCH8_ECC;
-		erased_ecc_vec = bch8_vector;
-	} else {
-		type = BCH4_ECC;
+	switch (info->ecc_opt) {
+	case OMAP_ECC_BCH4_CODE_HW:
+		/* omit  7th ECC byte reserved for ROM code compatibility */
+		actual_eccbytes = ecc->bytes - 1;
 		erased_ecc_vec = bch4_vector;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		/* omit 14th ECC byte reserved for ROM code compatibility */
+		actual_eccbytes = ecc->bytes - 1;
+		erased_ecc_vec = bch8_vector;
+		break;
+	default:
+		pr_err("invalid driver configuration\n");
+		return -EINVAL;
 	}
 
-	ecc_vector_size = info->nand.ecc.bytes;
-
-	/*
-	 * Remove extra byte padding for BCH8 RBL
-	 * compatibility and erased page handling
-	 */
-	eccsize = ecc_vector_size - 1;
+	/* Initialize elm error vector to zero */
+	memset(err_vec, 0, sizeof(err_vec));
 
 	for (i = 0; i < eccsteps ; i++) {
 		eccflag = 0;	/* initialize eccflag */
@@ -1394,8 +1333,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 		 * Check any error reported,
 		 * In case of error, non zero ecc reported.
 		 */
-
-		for (j = 0; (j < eccsize); j++) {
+		for (j = 0; j < actual_eccbytes; j++) {
 			if (calc_ecc[j] != 0) {
 				eccflag = 1; /* non zero ecc, error present */
 				break;
@@ -1403,50 +1341,43 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 		}
 
 		if (eccflag == 1) {
-			/*
-			 * Set threshold to minimum of 4, half of ecc.strength/2
-			 * to allow max bit flip in byte to 4
-			 */
-			unsigned int threshold = min_t(unsigned int, 4,
-					info->nand.ecc.strength / 2);
-
-			/*
-			 * Check data area is programmed by counting
-			 * number of 0's at fixed offset in spare area.
-			 * Checking count of 0's against threshold.
-			 * In case programmed page expects at least threshold
-			 * zeros in byte.
-			 * If zeros are less than threshold for programmed page/
-			 * zeros are more than threshold erased page, either
-			 * case page reported as uncorrectable.
-			 */
-			if (hweight8(~read_ecc[eccsize]) >= threshold) {
+			if (memcmp(calc_ecc, erased_ecc_vec,
+						actual_eccbytes) == 0) {
 				/*
-				 * Update elm error vector as
-				 * data area is programmed
+				 * calc_ecc[] matches pattern for ECC(all 0xff)
+				 * so this is definitely an erased-page
 				 */
-				err_vec[i].error_reported = true;
-				is_error_reported = true;
 			} else {
-				/* Error reported in erased page */
-				int bitflip_count;
-				u_char *buf = &data[info->nand.ecc.size * i];
-
-				if (memcmp(calc_ecc, erased_ecc_vec, eccsize)) {
-					bitflip_count = erased_sector_bitflips(
-							buf, read_ecc, info);
-
-					if (bitflip_count)
-						stat += bitflip_count;
-					else
-						return -EINVAL;
+				buf = &data[info->nand.ecc.size * i];
+				/*
+				 * count number of 0-bits in read_buf.
+				 * This check can be removed once a similar
+				 * check is introduced in generic NAND driver
+				 */
+				bitflip_count = erased_sector_bitflips(
+						buf, read_ecc, info);
+				if (bitflip_count) {
+					/*
+					 * number of 0-bits within ECC limits
+					 * So this may be an erased-page
+					 */
+					stat += bitflip_count;
+				} else {
+					/*
+					 * Too many 0-bits. It may be a
+					 * - programmed-page, OR
+					 * - erased-page with many bit-flips
+					 * So this page requires check by ELM
+					 */
+					err_vec[i].error_reported = true;
+					is_error_reported = true;
 				}
 			}
 		}
 
 		/* Update the ecc vector */
-		calc_ecc += ecc_vector_size;
-		read_ecc += ecc_vector_size;
+		calc_ecc += ecc->bytes;
+		read_ecc += ecc->bytes;
 	}
 
 	/* Check if any error reported */
@@ -1456,23 +1387,26 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 	/* Decode BCH error using ELM module */
 	elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec);
 
+	err = 0;
 	for (i = 0; i < eccsteps; i++) {
-		if (err_vec[i].error_reported) {
+		if (err_vec[i].error_uncorrectable) {
+			pr_err("nand: uncorrectable bit-flips found\n");
+			err = -EBADMSG;
+		} else if (err_vec[i].error_reported) {
 			for (j = 0; j < err_vec[i].error_count; j++) {
-				u32 bit_pos, byte_pos, error_max, pos;
-
-				if (type == BCH8_ECC)
-					error_max = BCH8_ECC_MAX;
-				else
-					error_max = BCH4_ECC_MAX;
-
-				if (info->nand.ecc.strength == BCH8_MAX_ERROR)
-					pos = err_vec[i].error_loc[j];
-				else
-					/* Add 4 to take care 4 bit padding */
+				switch (info->ecc_opt) {
+				case OMAP_ECC_BCH4_CODE_HW:
+					/* Add 4 bits to take care of padding */
 					pos = err_vec[i].error_loc[j] +
 						BCH4_BIT_PAD;
-
+					break;
+				case OMAP_ECC_BCH8_CODE_HW:
+					pos = err_vec[i].error_loc[j];
+					break;
+				default:
+					return -EINVAL;
+				}
+				error_max = (ecc->size + actual_eccbytes) * 8;
 				/* Calculate bit position of error */
 				bit_pos = pos % 8;
 
@@ -1480,13 +1414,22 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 				byte_pos = (error_max - pos - 1) / 8;
 
 				if (pos < error_max) {
-					if (byte_pos < 512)
+					if (byte_pos < 512) {
+						pr_debug("bitflip@dat[%d]=%x\n",
+						     byte_pos, data[byte_pos]);
 						data[byte_pos] ^= 1 << bit_pos;
-					else
+					} else {
+						pr_debug("bitflip@oob[%d]=%x\n",
+							(byte_pos - 512),
+						     spare_ecc[byte_pos - 512]);
 						spare_ecc[byte_pos - 512] ^=
 							1 << bit_pos;
+					}
+				} else {
+					pr_err("invalid bit-flip @ %d:%d\n",
+							 byte_pos, bit_pos);
+					err = -EBADMSG;
 				}
-				/* else, not interested to correct ecc */
 			}
 		}
 
@@ -1494,16 +1437,11 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 		stat += err_vec[i].error_count;
 
 		/* Update page data with sector size */
-		data += info->nand.ecc.size;
-		spare_ecc += ecc_vector_size;
+		data += ecc->size;
+		spare_ecc += ecc->bytes;
 	}
 
-	for (i = 0; i < eccsteps; i++)
-		/* Return error if uncorrectable error present */
-		if (err_vec[i].error_uncorrectable)
-			return -EINVAL;
-
-	return stat;
+	return (err) ? err : stat;
 }
 
 /**
@@ -1601,7 +1539,8 @@ static int is_elm_present(struct omap_nand_info *info,
 			struct device_node *elm_node, enum bch_ecc bch_type)
 {
 	struct platform_device *pdev;
-	info->is_elm_used = false;
+	struct nand_ecc_ctrl *ecc = &info->nand.ecc;
+	int err;
 	/* check whether elm-id is passed via DT */
 	if (!elm_node) {
 		pr_err("nand: error: ELM DT node not found\n");
@@ -1615,10 +1554,10 @@ static int is_elm_present(struct omap_nand_info *info,
 	}
 	/* ELM module available, now configure it */
 	info->elm_dev = &pdev->dev;
-	if (elm_config(info->elm_dev, bch_type))
-		return -ENODEV;
-	info->is_elm_used = true;
-	return 0;
+	err = elm_config(info->elm_dev, bch_type,
+		(info->mtd.writesize / ecc->size), ecc->size, ecc->bytes);
+
+	return err;
 }
 #endif /* CONFIG_MTD_NAND_ECC_BCH */
 
@@ -1657,6 +1596,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	info->gpmc_cs		= pdata->cs;
 	info->reg		= pdata->reg;
 	info->of_node		= pdata->of_node;
+	info->ecc_opt		= pdata->ecc_opt;
 	mtd			= &info->mtd;
 	mtd->priv		= &info->nand;
 	mtd->name		= dev_name(&pdev->dev);
@@ -1666,27 +1606,11 @@ static int omap_nand_probe(struct platform_device *pdev)
 	nand_chip->options	|= NAND_SKIP_BBTSCAN;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		err = -EINVAL;
-		dev_err(&pdev->dev, "error getting memory resource\n");
-		goto return_error;
-	}
+	nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nand_chip->IO_ADDR_R))
+		return PTR_ERR(nand_chip->IO_ADDR_R);
 
 	info->phys_base = res->start;
-	info->mem_size = resource_size(res);
-
-	if (!devm_request_mem_region(&pdev->dev, info->phys_base,
-				info->mem_size,	pdev->dev.driver->name)) {
-		err = -EBUSY;
-		goto return_error;
-	}
-
-	nand_chip->IO_ADDR_R = devm_ioremap(&pdev->dev, info->phys_base,
-						info->mem_size);
-	if (!nand_chip->IO_ADDR_R) {
-		err = -ENOMEM;
-		goto return_error;
-	}
 
 	nand_chip->controller = &info->controller;
 
@@ -1812,7 +1736,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	/* populate MTD interface based on ECC scheme */
 	nand_chip->ecc.layout	= &omap_oobinfo;
 	ecclayout		= &omap_oobinfo;
-	switch (pdata->ecc_opt) {
+	switch (info->ecc_opt) {
 	case OMAP_ECC_HAM1_CODE_HW:
 		pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
 		nand_chip->ecc.mode             = NAND_ECC_HW;
@@ -1844,9 +1768,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.size		= 512;
 		nand_chip->ecc.bytes		= 7;
 		nand_chip->ecc.strength		= 4;
-		nand_chip->ecc.hwctl		= omap3_enable_hwecc_bch;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap3_calculate_ecc_bch4;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		/* define ECC layout */
 		ecclayout->eccbytes		= nand_chip->ecc.bytes *
 							(mtd->writesize /
@@ -1884,9 +1808,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		/* 14th bit is kept reserved for ROM-code compatibility */
 		nand_chip->ecc.bytes		= 7 + 1;
 		nand_chip->ecc.strength		= 4;
-		nand_chip->ecc.hwctl		= omap3_enable_hwecc_bch;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap3_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
 		/* define ECC layout */
@@ -1919,9 +1843,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.size		= 512;
 		nand_chip->ecc.bytes		= 13;
 		nand_chip->ecc.strength		= 8;
-		nand_chip->ecc.hwctl		= omap3_enable_hwecc_bch;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap3_calculate_ecc_bch8;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		/* define ECC layout */
 		ecclayout->eccbytes		= nand_chip->ecc.bytes *
 							(mtd->writesize /
@@ -1960,9 +1884,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		/* 14th bit is kept reserved for ROM-code compatibility */
 		nand_chip->ecc.bytes		= 13 + 1;
 		nand_chip->ecc.strength		= 8;
-		nand_chip->ecc.hwctl		= omap3_enable_hwecc_bch;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap3_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
 		/* This ECC scheme requires ELM H/W block */
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 90f871acb0ef..2c98f9da7471 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -23,7 +23,6 @@
 #undef DEBUG
 
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 2a7a0b27ac38..7588fe2c127f 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -38,7 +38,6 @@
 
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
-#define NAND_DEV_READY_TIMEOUT  50
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 #define NAND_STOP_DELAY		(2 * HZ/50)
 #define PAGE_CHUNK_SIZE		(2048)
@@ -1531,7 +1530,7 @@ KEEP_CONFIG:
 	if (!ret) {
 		dev_err(&info->pdev->dev,
 			"ECC strength %d at page size %d is not supported\n",
-			chip->ecc_strength_ds, mtd->writesize);
+			ecc_strength, mtd->writesize);
 		return -ENODEV;
 	}
 
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index f0918e7411d9..79acbb8691b5 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -29,7 +29,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/io.h>
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 8e1919b6f074..093c29ac1a13 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -13,7 +13,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 6547c84afc3a..d945473c3882 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -25,7 +25,6 @@
 
 #include <linux/device.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 1de33b5d3903..635ee0027691 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -24,7 +24,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
@@ -3238,20 +3237,17 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 /**
  * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
  * @param mtd		MTD device structure
- * @param buf		the databuffer to put/get data
  * @param len		number of bytes to read
+ * @param retlen	pointer to variable to store the number of read bytes
+ * @param buf		the databuffer to put/get data
  *
  * Read factory OTP info.
  */
-static int onenand_get_fact_prot_info(struct mtd_info *mtd,
-			struct otp_info *buf, size_t len)
+static int onenand_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+				      size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
-
-	return ret ? : retlen;
+	return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL,
+				MTD_OTP_FACTORY);
 }
 
 /**
@@ -3273,20 +3269,17 @@ static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 /**
  * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
  * @param mtd		MTD device structure
- * @param buf		the databuffer to put/get data
+ * @param retlen	pointer to variable to store the number of read bytes
  * @param len		number of bytes to read
+ * @param buf		the databuffer to put/get data
  *
  * Read user OTP info.
  */
-static int onenand_get_user_prot_info(struct mtd_info *mtd,
-			struct otp_info *buf, size_t len)
+static int onenand_get_user_prot_info(struct mtd_info *mtd, size_t len,
+				      size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
-
-	return ret ? : retlen;
+	return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL,
+				MTD_OTP_USER);
 }
 
 /**
@@ -3995,11 +3988,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	/* Allocate buffers, if necessary */
 	if (!this->page_buf) {
 		this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
-		if (!this->page_buf) {
-			printk(KERN_ERR "%s: Can't allocate page_buf\n",
-				__func__);
+		if (!this->page_buf)
 			return -ENOMEM;
-		}
 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
 		this->verify_buf = kzalloc(mtd->writesize, GFP_KERNEL);
 		if (!this->verify_buf) {
@@ -4012,8 +4002,6 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!this->oob_buf) {
 		this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 		if (!this->oob_buf) {
-			printk(KERN_ERR "%s: Can't allocate oob_buf\n",
-				__func__);
 			if (this->options & ONENAND_PAGEBUF_ALLOC) {
 				this->options &= ~ONENAND_PAGEBUF_ALLOC;
 				kfree(this->page_buf);
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index df7400dd4df8..b1a792fd1c23 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -872,10 +872,8 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 
 	size = sizeof(struct mtd_info) + sizeof(struct onenand_chip);
 	mtd = kzalloc(size, GFP_KERNEL);
-	if (!mtd) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!mtd)
 		return -ENOMEM;
-	}
 
 	onenand = kzalloc(sizeof(struct s3c_onenand), GFP_KERNEL);
 	if (!onenand) {
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index 233b946e5d66..d1cbf26db2c0 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -602,8 +602,7 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr)
 	if (rc) {
 		printk(KERN_ERR PREFIX "error writing '%s' at "
 			"0x%lx\n", part->mbd.mtd->name, addr);
-		if (rc)
-			goto err;
+		goto err;
 	}
 	if (block == part->current_block)
 		part->header_cache[offset + HEADER_MAP_OFFSET] = del;
@@ -675,8 +674,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
 	if (rc) {
 		printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
 				part->mbd.mtd->name, addr);
-		if (rc)
-			goto err;
+		goto err;
 	}
 
 	part->sector_map[sector] = addr;
@@ -695,8 +693,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
 	if (rc) {
 		printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
 				part->mbd.mtd->name, addr);
-		if (rc)
-			goto err;
+		goto err;
 	}
 	block->used_sectors++;
 	block->free_sectors--;
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 4b8e89583f2a..cf49c22673b9 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -59,15 +59,12 @@ static struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl)
 	struct attribute_group *attr_group;
 	struct attribute **attributes;
 	struct sm_sysfs_attribute *vendor_attribute;
+	char *vendor;
 
-	int vendor_len = strnlen(ftl->cis_buffer + SM_CIS_VENDOR_OFFSET,
-					SM_SMALL_PAGE - SM_CIS_VENDOR_OFFSET);
-
-	char *vendor = kmalloc(vendor_len, GFP_KERNEL);
+	vendor = kstrndup(ftl->cis_buffer + SM_CIS_VENDOR_OFFSET,
+			  SM_SMALL_PAGE - SM_CIS_VENDOR_OFFSET, GFP_KERNEL);
 	if (!vendor)
 		goto error1;
-	memcpy(vendor, ftl->cis_buffer + SM_CIS_VENDOR_OFFSET, vendor_len);
-	vendor[vendor_len] = 0;
 
 	/* Initialize sysfs attributes */
 	vendor_attribute =
@@ -78,7 +75,7 @@ static struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl)
 	sysfs_attr_init(&vendor_attribute->dev_attr.attr);
 
 	vendor_attribute->data = vendor;
-	vendor_attribute->len = vendor_len;
+	vendor_attribute->len = strlen(vendor);
 	vendor_attribute->dev_attr.attr.name = "vendor";
 	vendor_attribute->dev_attr.attr.mode = S_IRUGO;
 	vendor_attribute->dev_attr.show = sm_attr_show;
diff --git a/drivers/mtd/tests/mtd_test.c b/drivers/mtd/tests/mtd_test.c
index c818a63532e7..111ee46a7428 100644
--- a/drivers/mtd/tests/mtd_test.c
+++ b/drivers/mtd/tests/mtd_test.c
@@ -1,6 +1,5 @@
 #define pr_fmt(fmt) "mtd_test: " fmt
 
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/printk.h>
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 0ba8b0a28838..7bf416329c19 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -22,7 +22,6 @@
 #ifndef __UBI_UBI_H__
 #define __UBI_UBI_H__
 
-#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/list.h>
 #include <linux/rbtree.h>
diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
index a27ec94877e4..b7361ed70537 100644
--- a/drivers/of/of_mtd.c
+++ b/drivers/of/of_mtd.c
@@ -50,6 +50,40 @@ int of_get_nand_ecc_mode(struct device_node *np)
 EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
 
 /**
+ * of_get_nand_ecc_step_size - Get ECC step size associated to
+ * the required ECC strength (see below).
+ * @np:	Pointer to the given device_node
+ *
+ * return the ECC step size, or errno in error case.
+ */
+int of_get_nand_ecc_step_size(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+	return ret ? ret : val;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size);
+
+/**
+ * of_get_nand_ecc_strength - Get required ECC strength over the
+ * correspnding step size as defined by 'nand-ecc-size'
+ * @np:	Pointer to the given device_node
+ *
+ * return the ECC strength, or errno in error case.
+ */
+int of_get_nand_ecc_strength(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+	return ret ? ret : val;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength);
+
+/**
  * of_get_nand_bus_width - Get nand bus witdh for given device_node
  * @np:	Pointer to the given device_node
  *
author	Linus Torvalds <torvalds@linux-foundation.org>	2014-04-07 21:17:30 +0400
committer	Linus Torvalds <torvalds@linux-foundation.org>	2014-04-07 21:17:30 +0400
commit	c29aa153ef0469cddf0146d41ce6494bd76be78b (patch)
tree	b49af4e6cf54e9988dd45640a86c4de7f49ddf6d /drivers
parent	2b3a8fd735f86ebeb2b9d061054003000c36b654 (diff)
parent	4a4163caccae97a23d97c29032664ee7b7a498d0 (diff)
download	linux-c29aa153ef0469cddf0146d41ce6494bd76be78b.tar.xz