Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6

* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6:
  [PATCH] bcm43xx: Fix access to non-existent PHY registers
  [PATCH] bcm43xx: Fix array overrun in bcm43xx_geo_init
  [PATCH] bcm43xx: check for valid MAC address in SPROM
  [PATCH] ieee80211: Fix A band channel count (resent)
  [PATCH] bcm43xx: fix iwmode crash when down
  [PATCH] softmac: make non-operational after being stopped
  [PATCH] softmac: don't reassociate if user asked for deauthentication
  spidernet: enable support for bcm5461 ethernet phy
  spidernet: introduce new setting
  Fix RTL8019AS init for Toshiba RBTX49xx boards
  au1000_eth.c: use ether_crc() from <linux/crc32.h>
  sky2: version 1.3
  Add more support for the Yukon Ultra chip found in dual core centino laptops.
  sky2: synchronize irq on remove
  sky2: dont write status ring
  sky2: edge triggered workaround enhancement
  sky2: use mask instead of modulo operation
  sky2: tx ring index mask fix
  sky2: status irq hang fix
  sky2: backout NAPI reschedule

12 files changed, 228 insertions, 161 deletions

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 1363083b4d83..14dbad14afb6 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -52,6 +52,7 @@
 #include <linux/mii.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>
+#include <linux/crc32.h>
 #include <asm/mipsregs.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -2070,23 +2071,6 @@ static void au1000_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-
-static unsigned const ethernet_polynomial = 0x04c11db7U;
-static inline u32 ether_crc(int length, unsigned char *data)
-{
-    int crc = -1;
-
-    while(--length >= 0) {
-		unsigned char current_octet = *data++;
-		int bit;
-		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-			crc = (crc << 1) ^
-				((crc < 0) ^ (current_octet & 1) ? 
-				 ethernet_polynomial : 0);
-    }
-    return crc;
-}
-
 static void set_rx_mode(struct net_device *dev)
 {
 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 93c494bcd18d..b32765215f75 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -139,8 +139,9 @@ bad_clone_list[] __initdata = {
 
 #if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
-#elif defined(CONFIG_PLAT_OAKS32R)
-#  define DCR_VAL 0x48
+#elif defined(CONFIG_PLAT_OAKS32R)  || \
+   defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#  define DCR_VAL 0x48		/* 8-bit mode */
 #else
 #  define DCR_VAL 0x49
 #endif
@@ -396,10 +397,22 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 		/* We must set the 8390 for word mode. */
 		outb_p(DCR_VAL, ioaddr + EN0_DCFG);
 		start_page = NESM_START_PG;
-		stop_page = NESM_STOP_PG;
+
+		/*
+		 * Realtek RTL8019AS datasheet says that the PSTOP register
+		 * shouldn't exceed 0x60 in 8-bit mode.
+		 * This chip can be identified by reading the signature from
+		 * the  remote byte count registers (otherwise write-only)...
+		 */
+		if ((DCR_VAL & 0x01) == 0 &&		/* 8-bit mode */
+		    inb(ioaddr + EN0_RCNTLO) == 0x50 &&
+		    inb(ioaddr + EN0_RCNTHI) == 0x70)
+			stop_page = 0x60;
+		else
+			stop_page = NESM_STOP_PG;
 	} else {
 		start_page = NE1SM_START_PG;
-		stop_page = NE1SM_STOP_PG;
+		stop_page  = NE1SM_STOP_PG;
 	}
 
 #if  defined(CONFIG_PLAT_MAPPI) || defined(CONFIG_PLAT_OAKS32R)
@@ -509,15 +522,9 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 	ei_status.name = name;
 	ei_status.tx_start_page = start_page;
 	ei_status.stop_page = stop_page;
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
-	wordlength = 1;
-#endif
 
-#ifdef CONFIG_PLAT_OAKS32R
-	ei_status.word16 = 0;
-#else
-	ei_status.word16 = (wordlength == 2);
-#endif
+	/* Use 16-bit mode only if this wasn't overridden by DCR_VAL */
+	ei_status.word16 = (wordlength == 2 && (DCR_VAL & 0x01));
 
 	ei_status.rx_start_page = start_page + TX_PAGES;
 #ifdef PACKETBUF_MEMSIZE
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 227df9876a2c..60cdfcabe1fd 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.2"
+#define DRV_VERSION		"1.3"
 #define PFX			DRV_NAME " "
 
 /*
@@ -79,6 +79,8 @@
 #define NAPI_WEIGHT		64
 #define PHY_RETRIES		1000
 
+#define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
+
 static const u32 default_msg =
     NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
     | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
@@ -96,6 +98,10 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
+static int idle_timeout = 100;
+module_param(idle_timeout, int, 0);
+MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)");
+
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -298,7 +304,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 	struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
-	if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) {
+	if (sky2->autoneg == AUTONEG_ENABLE &&
+	    (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 		u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
 		ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -326,7 +333,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 			ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
 
 			if (sky2->autoneg == AUTONEG_ENABLE &&
-			    hw->chip_id == CHIP_ID_YUKON_XL) {
+			    (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 				ctrl &= ~PHY_M_PC_DSC_MSK;
 				ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
 			}
@@ -442,10 +449,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
 
 		/* set LED Function Control register */
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
-							   PHY_M_LEDC_INIT_CTRL(7) |	/* 10 Mbps */
-							   PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
-							   PHY_M_LEDC_STA0_CTRL(7)));	/* 1000 Mbps */
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+			     (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
+			      PHY_M_LEDC_INIT_CTRL(7) |	/* 10 Mbps */
+			      PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
+			      PHY_M_LEDC_STA0_CTRL(7)));	/* 1000 Mbps */
 
 		/* set Polarity Control register */
 		gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
@@ -459,6 +467,25 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		/* restore page register */
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 		break;
+	case CHIP_ID_YUKON_EC_U:
+		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+		/* select page 3 to access LED control register */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+		/* set LED Function Control register */
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+			     (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
+			      PHY_M_LEDC_INIT_CTRL(8) |	/* 10 Mbps */
+			      PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
+			      PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
+
+		/* set Blink Rate in LED Timer Control Register */
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK,
+			     ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
+		/* restore page register */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+		break;
 
 	default:
 		/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
@@ -467,19 +494,21 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
 		/* apply fixes in PHY AFE */
-		gm_phy_write(hw, port, 22, 255);
+		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
+
 		/* increase differential signal amplitude in 10BASE-T */
-		gm_phy_write(hw, port, 24, 0xaa99);
-		gm_phy_write(hw, port, 23, 0x2011);
+		gm_phy_write(hw, port, 0x18, 0xaa99);
+		gm_phy_write(hw, port, 0x17, 0x2011);
 
 		/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
-		gm_phy_write(hw, port, 24, 0xa204);
-		gm_phy_write(hw, port, 23, 0x2002);
+		gm_phy_write(hw, port, 0x18, 0xa204);
+		gm_phy_write(hw, port, 0x17, 0x2002);
 
 		/* set page register to 0 */
-		gm_phy_write(hw, port, 22, 0);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 	} else {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
@@ -553,6 +582,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
 		if (sky2->duplex == DUPLEX_FULL)
 			reg |= GM_GPCR_DUP_FULL;
+
+		/* turn off pause in 10/100mbps half duplex */
+		else if (sky2->speed != SPEED_1000 &&
+			 hw->chip_id != CHIP_ID_YUKON_EC_U)
+			sky2->tx_pause = sky2->rx_pause = 0;
 	} else
 		reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
 
@@ -719,7 +753,7 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
 {
 	struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
 
-	sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE;
+	sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
 	return le;
 }
 
@@ -735,7 +769,7 @@ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
 {
 	struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
-	sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE;
+	sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
 	return le;
 }
 
@@ -1078,7 +1112,7 @@ err_out:
 /* Modular subtraction in ring */
 static inline int tx_dist(unsigned tail, unsigned head)
 {
-	return (head - tail) % TX_RING_SIZE;
+	return (head - tail) & (TX_RING_SIZE - 1);
 }
 
 /* Number of list elements available for next tx */
@@ -1255,7 +1289,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 		le->opcode = OP_BUFFER | HW_OWNER;
 
 		fre = sky2->tx_ring
-		    + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE;
+		    + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
 		pci_unmap_addr_set(fre, mapaddr, mapping);
 	}
 
@@ -1315,7 +1349,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct tx_ring_info *fre;
-			fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE;
+			fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE);
 			pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
 				       skb_shinfo(skb)->frags[i].size,
 				       PCI_DMA_TODEVICE);
@@ -1498,17 +1532,26 @@ static void sky2_link_up(struct sky2_port *sky2)
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
 
-	if (hw->chip_id == CHIP_ID_YUKON_XL) {
+	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
 		u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+		u16 led = PHY_M_LEDC_LOS_CTRL(1);	/* link active */
+
+		switch(sky2->speed) {
+		case SPEED_10:
+			led |= PHY_M_LEDC_INIT_CTRL(7);
+			break;
+
+		case SPEED_100:
+			led |= PHY_M_LEDC_STA1_CTRL(7);
+			break;
+
+		case SPEED_1000:
+			led |= PHY_M_LEDC_STA0_CTRL(7);
+			break;
+		}
 
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
-			     PHY_M_LEDC_INIT_CTRL(sky2->speed ==
-						  SPEED_10 ? 7 : 0) |
-			     PHY_M_LEDC_STA1_CTRL(sky2->speed ==
-						  SPEED_100 ? 7 : 0) |
-			     PHY_M_LEDC_STA0_CTRL(sky2->speed ==
-						  SPEED_1000 ? 7 : 0));
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 	}
 
@@ -1583,7 +1626,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 	sky2->speed = sky2_phy_speed(hw, aux);
 
 	/* Pause bits are offset (9..8) */
-	if (hw->chip_id == CHIP_ID_YUKON_XL)
+	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
 		aux >>= 6;
 
 	sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
@@ -1859,35 +1902,28 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
 	int work_done = 0;
+	u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
 	rmb();
 
-	for(;;) {
+	while (hw->st_idx != hwidx) {
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
 		struct net_device *dev;
 		struct sky2_port *sky2;
 		struct sk_buff *skb;
 		u32 status;
 		u16 length;
-		u8  link, opcode;
 
-		opcode = le->opcode;
-		if (!opcode)
-			break;
-		opcode &= ~HW_OWNER;
-
-		hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE;
-		le->opcode = 0;
+		hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
 
-		link = le->link;
-		BUG_ON(link >= 2);
-		dev = hw->dev[link];
+		BUG_ON(le->link >= 2);
+		dev = hw->dev[le->link];
 
 		sky2 = netdev_priv(dev);
 		length = le->length;
 		status = le->status;
 
-		switch (opcode) {
+		switch (le->opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
 			skb = sky2_receive(sky2, length, status);
 			if (!skb)
@@ -1927,7 +1963,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 
 		case OP_TXINDEXLE:
 			/* TX index reports status for both ports */
-			sky2_tx_done(hw->dev[0], status & 0xffff);
+			BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
+			sky2_tx_done(hw->dev[0], status & 0xfff);
 			if (hw->dev[1])
 				sky2_tx_done(hw->dev[1],
 				     ((status >> 24) & 0xff)
@@ -1937,8 +1974,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 		default:
 			if (net_ratelimit())
 				printk(KERN_WARNING PFX
-				       "unknown status opcode 0x%x\n", opcode);
-			break;
+				       "unknown status opcode 0x%x\n", le->opcode);
+			goto exit_loop;
 		}
 	}
 
@@ -2089,12 +2126,13 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
  */
 static void sky2_idle(unsigned long arg)
 {
-	struct net_device *dev = (struct net_device *) arg;
+	struct sky2_hw *hw = (struct sky2_hw *) arg;
+	struct net_device *dev = hw->dev[0];
 
-	local_irq_disable();
 	if (__netif_rx_schedule_prep(dev))
 		__netif_rx_schedule(dev);
-	local_irq_enable();
+
+	mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
 }
 
 
@@ -2105,65 +2143,46 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	int work_done = 0;
 	u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
 
- restart_poll:
-	if (unlikely(status & ~Y2_IS_STAT_BMU)) {
-		if (status & Y2_IS_HW_ERR)
-			sky2_hw_intr(hw);
-
-		if (status & Y2_IS_IRQ_PHY1)
-			sky2_phy_intr(hw, 0);
-
-		if (status & Y2_IS_IRQ_PHY2)
-			sky2_phy_intr(hw, 1);
+	if (status & Y2_IS_HW_ERR)
+		sky2_hw_intr(hw);
 
-		if (status & Y2_IS_IRQ_MAC1)
-			sky2_mac_intr(hw, 0);
+	if (status & Y2_IS_IRQ_PHY1)
+		sky2_phy_intr(hw, 0);
 
-		if (status & Y2_IS_IRQ_MAC2)
-			sky2_mac_intr(hw, 1);
+	if (status & Y2_IS_IRQ_PHY2)
+		sky2_phy_intr(hw, 1);
 
-		if (status & Y2_IS_CHK_RX1)
-			sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
+	if (status & Y2_IS_IRQ_MAC1)
+		sky2_mac_intr(hw, 0);
 
-		if (status & Y2_IS_CHK_RX2)
-			sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
+	if (status & Y2_IS_IRQ_MAC2)
+		sky2_mac_intr(hw, 1);
 
-		if (status & Y2_IS_CHK_TXA1)
-			sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
+	if (status & Y2_IS_CHK_RX1)
+		sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
 
-		if (status & Y2_IS_CHK_TXA2)
-			sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
-	}
+	if (status & Y2_IS_CHK_RX2)
+		sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
 
-	if (status & Y2_IS_STAT_BMU) {
-		work_done += sky2_status_intr(hw, work_limit - work_done);
-		*budget -= work_done;
-		dev0->quota -= work_done;
+	if (status & Y2_IS_CHK_TXA1)
+		sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
 
-		if (work_done >= work_limit)
-			return 1;
+	if (status & Y2_IS_CHK_TXA2)
+		sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
+	if (status & Y2_IS_STAT_BMU)
 		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-	}
-
-	mod_timer(&hw->idle_timer, jiffies + HZ);
 
-	local_irq_disable();
-	__netif_rx_complete(dev0);
+	work_done = sky2_status_intr(hw, work_limit);
+	*budget -= work_done;
+	dev0->quota -= work_done;
 
-	status = sky2_read32(hw, B0_Y2_SP_LISR);
+	if (work_done >= work_limit)
+		return 1;
 
-	if (unlikely(status)) {
-		/* More work pending, try and keep going */
-		if (__netif_rx_schedule_prep(dev0)) {
-			__netif_rx_reschedule(dev0, work_done);
-			status = sky2_read32(hw, B0_Y2_SP_EISR);
-			local_irq_enable();
-			goto restart_poll;
-		}
-	}
+	netif_rx_complete(dev0);
 
-	local_irq_enable();
+	status = sky2_read32(hw, B0_Y2_SP_LISR);
 	return 0;
 }
 
@@ -2244,13 +2263,6 @@ static int __devinit sky2_reset(struct sky2_hw *hw)
 		return -EOPNOTSUPP;
 	}
 
-	/* This chip is new and not tested yet */
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-		pr_info(PFX "%s: is a version of Yukon 2 chipset that has not been tested yet.\n",
-			pci_name(hw->pdev));
-		pr_info("Please report success/failure to maintainer <shemminger@osdl.org>\n");
-	}
-
 	/* disable ASF */
 	if (hw->chip_id <= CHIP_ID_YUKON_EC) {
 		sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -3302,7 +3314,10 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
-	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) dev);
+	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+	if (idle_timeout > 0)
+		mod_timer(&hw->idle_timer,
+			  jiffies + msecs_to_jiffies(idle_timeout));
 
 	pci_set_drvdata(pdev, hw);
 
@@ -3342,6 +3357,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	del_timer_sync(&hw->idle_timer);
 
 	sky2_write32(hw, B0_IMSK, 0);
+	synchronize_irq(hw->pdev->irq);
+
 	dev0 = hw->dev[0];
 	dev1 = hw->dev[1];
 	if (dev1)
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b026f5653f04..8012994c9b93 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -378,6 +378,9 @@ enum {
 	CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */
 	CHIP_REV_YU_EC_A2    = 1,  /* Chip Rev. for Yukon-EC A2 */
 	CHIP_REV_YU_EC_A3    = 2,  /* Chip Rev. for Yukon-EC A3 */
+
+	CHIP_REV_YU_EC_U_A0  = 0,
+	CHIP_REV_YU_EC_U_A1  = 1,
 };
 
 /*	B2_Y2_CLK_GATE	 8 bit	Clock Gating (Yukon-2 only) */
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 43f5e86fc559..394339d5e87c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1652,6 +1652,8 @@ spider_net_enable_card(struct spider_net_card *card)
 		{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
 
 		{ SPIDER_NET_GMRWOLCTRL, 0 },
+		{ SPIDER_NET_GTESTMD, 0x10000000 },
+		{ SPIDER_NET_GTTQMSK, 0x00400040 },
 		{ SPIDER_NET_GTESTMD, 0 },
 
 		{ SPIDER_NET_GMACINTEN, 0 },
@@ -1792,15 +1794,7 @@ spider_net_setup_phy(struct spider_net_card *card)
 	if (phy->def->ops->setup_forced)
 		phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL);
 
-	/* the following two writes could be moved to sungem_phy.c */
-	/* enable fiber mode */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x9020);
-	/* LEDs active in both modes, autosense prio = fiber */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f);
-
-	/* switch off fibre autoneg */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0xfc01);
-	spider_net_write_phy(card->netdev, 1, 0x0b, 0x0004);
+	phy->def->ops->enable_fiber(phy);
 
 	phy->def->ops->read_link(phy);
 	pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name,
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 5922b529a048..3b8d951cf73c 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -120,6 +120,8 @@ extern char spider_net_driver_name[];
 #define SPIDER_NET_GMRUAFILnR		0x00000500
 #define SPIDER_NET_GMRUA0FIL15R		0x00000578
 
+#define SPIDER_NET_GTTQMSK		0x00000934
+
 /* RX DMA controller registers, all 0x00000a.. are for DMA controller A,
  * 0x00000b.. for DMA controller B, etc. */
 #define SPIDER_NET_GDADCHA		0x00000a00
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 046371ee5bbe..b2ddd5e79303 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -329,6 +329,30 @@ static int bcm5421_init(struct mii_phy* phy)
 	return 0;
 }
 
+static int bcm5421_enable_fiber(struct mii_phy* phy)
+{
+	/* enable fiber mode */
+	phy_write(phy, MII_NCONFIG, 0x9020);
+	/* LEDs active in both modes, autosense prio = fiber */
+	phy_write(phy, MII_NCONFIG, 0x945f);
+
+	/* switch off fibre autoneg */
+	phy_write(phy, MII_NCONFIG, 0xfc01);
+	phy_write(phy, 0x0b, 0x0004);
+
+	return 0;
+}
+
+static int bcm5461_enable_fiber(struct mii_phy* phy)
+{
+        phy_write(phy, MII_NCONFIG, 0xfc0c);
+        phy_write(phy, MII_BMCR, 0x4140);
+        phy_write(phy, MII_NCONFIG, 0xfc0b);
+	phy_write(phy, MII_BMCR, 0x0140);
+
+	return 0;
+}
+
 static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
 	u16 ctl, adv;
@@ -762,6 +786,7 @@ static struct mii_phy_ops bcm5421_phy_ops = {
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
 	.read_link	= bcm54xx_read_link,
+	.enable_fiber   = bcm5421_enable_fiber,
 };
 
 static struct mii_phy_def bcm5421_phy_def = {
@@ -792,6 +817,25 @@ static struct mii_phy_def bcm5421k2_phy_def = {
 	.ops		= &bcm5421k2_phy_ops
 };
 
+static struct mii_phy_ops bcm5461_phy_ops = {
+	.init		= bcm5421_init,
+	.suspend	= generic_suspend,
+	.setup_aneg	= bcm54xx_setup_aneg,
+	.setup_forced	= bcm54xx_setup_forced,
+	.poll_link	= genmii_poll_link,
+	.read_link	= bcm54xx_read_link,
+	.enable_fiber   = bcm5461_enable_fiber,
+};
+
+static struct mii_phy_def bcm5461_phy_def = {
+	.phy_id		= 0x002060c0,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "BCM5461",
+	.features	= MII_GBIT_FEATURES,
+	.magic_aneg	= 1,
+	.ops		= &bcm5461_phy_ops
+};
+
 /* Broadcom BCM 5462 built-in Vesta */
 static struct mii_phy_ops bcm5462V_phy_ops = {
 	.init		= bcm5421_init,
@@ -857,6 +901,7 @@ static struct mii_phy_def* mii_phy_table[] = {
 	&bcm5411_phy_def,
 	&bcm5421_phy_def,
 	&bcm5421k2_phy_def,
+	&bcm5461_phy_def,
 	&bcm5462V_phy_def,
 	&marvell_phy_def,
 	&genmii_phy_def,
diff --git a/drivers/net/sungem_phy.h b/drivers/net/sungem_phy.h
index 430544496c52..69e125197fcf 100644
--- a/drivers/net/sungem_phy.h
+++ b/drivers/net/sungem_phy.h
@@ -12,6 +12,7 @@ struct mii_phy_ops
 	int		(*setup_forced)(struct mii_phy *phy, int speed, int fd);
 	int		(*poll_link)(struct mii_phy *phy);
 	int		(*read_link)(struct mii_phy *phy);
+	int		(*enable_fiber)(struct mii_phy *phy);
 };
 
 /* Structure used to statically define an mii/gii based PHY */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 9a06e61df0a2..e2982a83ae42 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -939,9 +939,9 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
 	return 0;
 }
 
-static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
+static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
 {
-	struct ieee80211_geo geo;
+	struct ieee80211_geo *geo;
 	struct ieee80211_channel *chan;
 	int have_a = 0, have_bg = 0;
 	int i;
@@ -949,7 +949,10 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	struct bcm43xx_phyinfo *phy;
 	const char *iso_country;
 
-	memset(&geo, 0, sizeof(geo));
+	geo = kzalloc(sizeof(*geo), GFP_KERNEL);
+	if (!geo)
+		return -ENOMEM;
+
 	for (i = 0; i < bcm->nr_80211_available; i++) {
 		phy = &(bcm->core_80211_ext[i].phy);
 		switch (phy->type) {
@@ -967,31 +970,36 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
 
  	if (have_a) {
-		for (i = 0, channel = 0; channel < 201; channel++) {
-			chan = &geo.a[i++];
+		for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
+		      channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
+			chan = &geo->a[i++];
 			chan->freq = bcm43xx_channel_to_freq_a(channel);
 			chan->channel = channel;
 		}
-		geo.a_channels = i;
+		geo->a_channels = i;
 	}
 	if (have_bg) {
-		for (i = 0, channel = 1; channel < 15; channel++) {
-			chan = &geo.bg[i++];
+		for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
+		      channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
+			chan = &geo->bg[i++];
 			chan->freq = bcm43xx_channel_to_freq_bg(channel);
 			chan->channel = channel;
 		}
-		geo.bg_channels = i;
+		geo->bg_channels = i;
 	}
-	memcpy(geo.name, iso_country, 2);
+	memcpy(geo->name, iso_country, 2);
 	if (0 /*TODO: Outdoor use only */)
-		geo.name[2] = 'O';
+		geo->name[2] = 'O';
 	else if (0 /*TODO: Indoor use only */)
-		geo.name[2] = 'I';
+		geo->name[2] = 'I';
 	else
-		geo.name[2] = ' ';
-	geo.name[3] = '\0';
+		geo->name[2] = ' ';
+	geo->name[3] = '\0';
+
+	ieee80211_set_geo(bcm->ieee, geo);
+	kfree(geo);
 
-	ieee80211_set_geo(bcm->ieee, &geo);
+	return 0;
 }
 
 /* DummyTransmission function, as documented on 
@@ -3479,16 +3487,17 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
 			goto err_80211_unwind;
 		bcm43xx_wireless_core_disable(bcm);
 	}
+	err = bcm43xx_geo_init(bcm);
+	if (err)
+		goto err_80211_unwind;
 	bcm43xx_pctl_set_crystal(bcm, 0);
 
 	/* Set the MAC address in the networking subsystem */
-	if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+	if (is_valid_ether_addr(bcm->sprom.et1macaddr))
 		memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6);
 	else
 		memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6);
 
-	bcm43xx_geo_init(bcm);
-
 	snprintf(bcm->nick, IW_ESSID_MAX_SIZE,
 		 "Broadcom %04X", bcm->chip_id);
 
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
index eca79a38594a..30a202b258b5 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -118,12 +118,14 @@ int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm,
 static inline
 int bcm43xx_is_valid_channel_a(u8 channel)
 {
-	return (channel <= 200);
+	return (channel >= IEEE80211_52GHZ_MIN_CHANNEL
+	       && channel <= IEEE80211_52GHZ_MAX_CHANNEL);
 }
 static inline
 int bcm43xx_is_valid_channel_bg(u8 channel)
 {
-	return (channel >= 1 && channel <= 14);
+	return (channel >= IEEE80211_24GHZ_MIN_CHANNEL
+	       && channel <= IEEE80211_24GHZ_MAX_CHANNEL);
 }
 static inline
 int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index 33137165727f..b0abac515530 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1287,7 +1287,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 	if (radio->revision == 8)
 		bcm43xx_phy_write(bcm, 0x0805, 0x3230);
 	bcm43xx_phy_init_pctl(bcm);
-	if (bcm->chip_id == 0x4306 && bcm->chip_package != 2) {
+	if (bcm->chip_id == 0x4306 && bcm->chip_package == 2) {
 		bcm43xx_phy_write(bcm, 0x0429,
 				  bcm43xx_phy_read(bcm, 0x0429) & 0xBFFF);
 		bcm43xx_phy_write(bcm, 0x04C3,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index 3edbb481a0a0..b45063974ae9 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -182,8 +182,11 @@ static int bcm43xx_wx_set_mode(struct net_device *net_dev,
 		mode = BCM43xx_INITIAL_IWMODE;
 
 	bcm43xx_lock_mmio(bcm, flags);
-	if (bcm->ieee->iw_mode != mode)
-		bcm43xx_set_iwmode(bcm, mode);
+	if (bcm->initialized) {
+		if (bcm->ieee->iw_mode != mode)
+			bcm43xx_set_iwmode(bcm, mode);
+	} else
+		bcm->ieee->iw_mode = mode;
 	bcm43xx_unlock_mmio(bcm, flags);
 
 	return 0;