Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:

 - Bartlomiej added pata_falcon

 - Christoph is trying to remove use of static 4k buf.  It's still WIP

 - config cleanup around HAS_DMA

 - other fixes and driver-specific changes

* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits)
  ata: pata_of_platform: using of_property_read_u32() helper
  pata_atiixp: Don't use unconnected secondary port on SB600/SB700
  libata-sff: Don't scan disabled ports when checking for legacy mode.
  pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode()
  ahci: qoriq: added ls2088a platforms support
  ahci: qoriq: report error when ecc register address is missing in dts
  ahci: qoriq: added a condition to enable dma coherence
  Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf"
  ahci: imx: fix building without hwmon or thermal
  ata: add Atari Falcon PATA controller driver
  ata: pass queued command to ->sff_data_xfer method
  ata: allow subsystem to be used on m68k arch
  libata: switch to dynamic allocation instead of ata_scsi_rbuf
  libata: don't call ata_scsi_rbuf_fill for command without a response buffer
  libata: call ->scsi_done from ata_scsi_simulate
  libata: remove the done callback from ata_scsi_args
  libata: move struct ata_scsi_args to libata-scsi.c
  libata: avoid global response buffer in atapi_qc_complete
  libata-eh: Use switch() instead of sparse array for protocol strings
  ata: sata_mv: Convert to devm_ioremap_resource()
  ...

23 files changed, 608 insertions, 187 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 2c8be74f401d..70b57d2229d6 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -14,7 +14,7 @@ menuconfig ATA
 	tristate "Serial ATA and Parallel ATA drivers (libata)"
 	depends on HAS_IOMEM
 	depends on BLOCK
-	depends on !(M32R || M68K || S390) || BROKEN
+	depends on !(M32R || S390) || BROKEN
 	select SCSI
 	select GLOB
 	---help---
@@ -80,6 +80,8 @@ config SATA_PMP
 	  This option adds support for SATA Port Multipliers
 	  (the SATA version of an ethernet hub, or SAS expander).
 
+if HAS_DMA
+
 comment "Controllers with non-SFF native interface"
 
 config SATA_AHCI
@@ -127,6 +129,7 @@ config AHCI_ST
 config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
 	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
+	depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -232,6 +235,8 @@ config SATA_SIL24
 
 	  If unsure, say N.
 
+endif # HAS_DMA
+
 config ATA_SFF
 	bool "ATA SFF support (for legacy IDE and PATA)"
 	default y
@@ -289,6 +294,7 @@ config SATA_SX4
 
 config ATA_BMDMA
 	bool "ATA BMDMA support"
+	depends on HAS_DMA
 	default y
 	help
 	  This option adds support for SFF ATA controllers with BMDMA
@@ -344,6 +350,7 @@ config SATA_DWC_VDEBUG
 
 config SATA_HIGHBANK
 	tristate "Calxeda Highbank SATA support"
+	depends on HAS_DMA
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	help
 	  This option enables support for the Calxeda Highbank SoC's
@@ -353,6 +360,7 @@ config SATA_HIGHBANK
 
 config SATA_MV
 	tristate "Marvell SATA support"
+	depends on HAS_DMA
 	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 	select GENERIC_PHY
@@ -895,6 +903,15 @@ config PATA_CMD640_PCI
 
 	  If unsure, say N.
 
+config PATA_FALCON
+	tristate "Atari Falcon PATA support"
+	depends on M68K && ATARI
+	help
+	  This option enables support for the on-board IDE
+	  interface on the Atari Falcon.
+
+	  If unsure, say N.
+
 config PATA_ISAPNP
 	tristate "ISA Plug and Play PATA support"
 	depends on ISAPNP
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a46e6b784bda..89a0a1915d36 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
 obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
 obj-$(CONFIG_PATA_AT91)		+= pata_at91.o
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
+obj-$(CONFIG_PATA_FALCON)	+= pata_falcon.o
 obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 3f3a7db208ae..787567e840bd 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -26,6 +26,9 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/libata.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/thermal.h>
 #include "ahci.h"
 
 #define DRV_NAME "ahci-imx"
@@ -214,6 +217,180 @@ static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
 	return timeout ? 0 : -ETIMEDOUT;
 }
 
+enum {
+	/* SATA PHY Register */
+	SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001,
+	SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008,
+	SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009,
+	SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A,
+	SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017,
+};
+
+static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
+{
+	u16 adc_out_reg, read_sum;
+	u32 index, read_attempt;
+	const u32 attempt_limit = 100;
+
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
+	imx_phy_reg_write(rtune_ctl_reg, mmio);
+
+	/* two dummy read */
+	index = 0;
+	read_attempt = 0;
+	adc_out_reg = 0;
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_ADC_OUT, mmio);
+	while (index < 2) {
+		imx_phy_reg_read(&adc_out_reg, mmio);
+		/* check if valid */
+		if (adc_out_reg & 0x400)
+			index++;
+
+		read_attempt++;
+		if (read_attempt > attempt_limit) {
+			dev_err(dev, "Read REG more than %d times!\n",
+				attempt_limit);
+			break;
+		}
+	}
+
+	index = 0;
+	read_attempt = 0;
+	read_sum = 0;
+	while (index < 80) {
+		imx_phy_reg_read(&adc_out_reg, mmio);
+		if (adc_out_reg & 0x400) {
+			read_sum = read_sum + (adc_out_reg & 0x3FF);
+			index++;
+		}
+		read_attempt++;
+		if (read_attempt > attempt_limit) {
+			dev_err(dev, "Read REG more than %d times!\n",
+				attempt_limit);
+			break;
+		}
+	}
+
+	/* Use the U32 to make 1000 precision */
+	return (read_sum * 1000) / 80;
+}
+
+/* SATA AHCI temperature monitor */
+static int sata_ahci_read_temperature(void *dev, int *temp)
+{
+	u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum;
+	u32 str1, str2, str3, str4;
+	int m1, m2, a;
+	struct ahci_host_priv *hpriv = dev_get_drvdata(dev);
+	void __iomem *mmio = hpriv->mmio;
+
+	/* check rd-wr to reg */
+	read_sum = 0;
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT, mmio);
+	imx_phy_reg_write(read_sum, mmio);
+	imx_phy_reg_read(&read_sum, mmio);
+	if ((read_sum & 0xffff) != 0)
+		dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
+
+	imx_phy_reg_write(0x5A5A, mmio);
+	imx_phy_reg_read(&read_sum, mmio);
+	if ((read_sum & 0xffff) != 0x5A5A)
+		dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
+
+	imx_phy_reg_write(0x1234, mmio);
+	imx_phy_reg_read(&read_sum, mmio);
+	if ((read_sum & 0xffff) != 0x1234)
+		dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
+
+	/* start temperature test */
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
+	imx_phy_reg_read(&mpll_test_reg, mmio);
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
+	imx_phy_reg_read(&rtune_ctl_reg, mmio);
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
+	imx_phy_reg_read(&dac_ctl_reg, mmio);
+
+	/* mpll_tst.meas_iv   ([12:2]) */
+	str1 = (mpll_test_reg >> 2) & 0x7FF;
+	/* rtune_ctl.mode     ([1:0]) */
+	str2 = (rtune_ctl_reg) & 0x3;
+	/* dac_ctl.dac_mode   ([14:12]) */
+	str3 = (dac_ctl_reg >> 12)  & 0x7;
+	/* rtune_ctl.sel_atbp ([4]) */
+	str4 = (rtune_ctl_reg >> 4);
+
+	/* Calculate the m1 */
+	/* mpll_tst.meas_iv */
+	mpll_test_reg = (mpll_test_reg & 0xE03) | (512) << 2;
+	/* rtune_ctl.mode */
+	rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (1);
+	/* dac_ctl.dac_mode */
+	dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (4) << 12;
+	/* rtune_ctl.sel_atbp */
+	rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (0) << 4;
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
+	imx_phy_reg_write(mpll_test_reg, mmio);
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
+	imx_phy_reg_write(dac_ctl_reg, mmio);
+	m1 = read_adc_sum(dev, rtune_ctl_reg, mmio);
+
+	/* Calculate the m2 */
+	/* rtune_ctl.sel_atbp */
+	rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (1) << 4;
+	m2 = read_adc_sum(dev, rtune_ctl_reg, mmio);
+
+	/* restore the status  */
+	/* mpll_tst.meas_iv */
+	mpll_test_reg = (mpll_test_reg & 0xE03) | (str1) << 2;
+	/* rtune_ctl.mode */
+	rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (str2);
+	/* dac_ctl.dac_mode */
+	dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (str3) << 12;
+	/* rtune_ctl.sel_atbp */
+	rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (str4) << 4;
+
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
+	imx_phy_reg_write(mpll_test_reg, mmio);
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
+	imx_phy_reg_write(dac_ctl_reg, mmio);
+	imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
+	imx_phy_reg_write(rtune_ctl_reg, mmio);
+
+	/* Compute temperature */
+	if (!(m2 / 1000))
+		m2 = 1000;
+	a = (m2 - m1) / (m2/1000);
+	*temp = ((-559) * a * a) / 1000 + (1379) * a + (-458000);
+
+	return 0;
+}
+
+static ssize_t sata_ahci_show_temp(struct device *dev,
+				   struct device_attribute *da,
+				   char *buf)
+{
+	unsigned int temp = 0;
+	int err;
+
+	err = sata_ahci_read_temperature(dev, &temp);
+	if (err < 0)
+		return err;
+
+	return sprintf(buf, "%u\n", temp);
+}
+
+static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = {
+	.get_temp = sata_ahci_read_temperature,
+};
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sata_ahci_show_temp, NULL, 0);
+
+static struct attribute *fsl_sata_ahci_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(fsl_sata_ahci);
+
 static int imx_sata_enable(struct ahci_host_priv *hpriv)
 {
 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
@@ -597,6 +774,25 @@ static int imx_ahci_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (imxpriv->type == AHCI_IMX53 &&
+	    IS_ENABLED(CONFIG_HWMON)) {
+		/* Add the temperature monitor */
+		struct device *hwmon_dev;
+
+		hwmon_dev =
+			devm_hwmon_device_register_with_groups(dev,
+							"sata_ahci",
+							hpriv,
+							fsl_sata_ahci_groups);
+		if (IS_ERR(hwmon_dev)) {
+			ret = PTR_ERR(hwmon_dev);
+			goto disable_clk;
+		}
+		devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
+					     &fsl_sata_ahci_of_thermal_ops);
+		dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev));
+	}
+
 	ret = imx_sata_enable(hpriv);
 	if (ret)
 		goto disable_clk;
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 9884c8c6e934..85d833289f28 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -46,19 +46,21 @@
 #define LS1021A_AXICC_ADDR	0xC0
 
 #define SATA_ECC_DISABLE	0x00020000
-#define LS1046A_SATA_ECC_DIS	0x80000000
+#define ECC_DIS_ARMV8_CH2	0x80000000
 
 enum ahci_qoriq_type {
 	AHCI_LS1021A,
 	AHCI_LS1043A,
 	AHCI_LS2080A,
 	AHCI_LS1046A,
+	AHCI_LS2088A,
 };
 
 struct ahci_qoriq_priv {
 	struct ccsr_ahci *reg_base;
 	enum ahci_qoriq_type type;
 	void __iomem *ecc_addr;
+	bool is_dmacoherent;
 };
 
 static const struct of_device_id ahci_qoriq_of_match[] = {
@@ -66,6 +68,7 @@ static const struct of_device_id ahci_qoriq_of_match[] = {
 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
 	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
@@ -157,6 +160,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 
 	switch (qpriv->type) {
 	case AHCI_LS1021A:
+		if (!qpriv->ecc_addr)
+			return -EINVAL;
 		writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
@@ -164,26 +169,43 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
 		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
-		writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG,
+					reg_base + LS1021A_AXICC_ADDR);
 		break;
 
 	case AHCI_LS1043A:
+		if (!qpriv->ecc_addr)
+			return -EINVAL;
+		writel(ECC_DIS_ARMV8_CH2, qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
-		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 
 	case AHCI_LS2080A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
-		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 
 	case AHCI_LS1046A:
-		writel(LS1046A_SATA_ECC_DIS, qpriv->ecc_addr);
+		if (!qpriv->ecc_addr)
+			return -EINVAL;
+		writel(ECC_DIS_ARMV8_CH2, qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
-		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+
+	case AHCI_LS2088A:
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 	}
 
@@ -221,6 +243,7 @@ static int ahci_qoriq_probe(struct platform_device *pdev)
 		if (IS_ERR(qoriq_priv->ecc_addr))
 			return PTR_ERR(qoriq_priv->ecc_addr);
 	}
+	qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
 
 	rc = ahci_platform_enable_resources(hpriv);
 	if (rc)
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 73b19b277138..c2b5941d9184 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -821,8 +821,10 @@ static int xgene_ahci_probe(struct platform_device *pdev)
 				dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n",
 					__func__);
 				version = XGENE_AHCI_V1;
-			} else if (info->valid & ACPI_VALID_CID) {
-				version = XGENE_AHCI_V2;
+			} else {
+				if (info->valid & ACPI_VALID_CID)
+					version = XGENE_AHCI_V2;
+				kfree(info);
 			}
 		}
 	}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c2d3785ec227..ca75823697dd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4816,32 +4816,6 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 }
 
 /**
- *	ata_sg_clean - Unmap DMA memory associated with command
- *	@qc: Command containing DMA memory to be released
- *
- *	Unmap all mapped DMA memory associated with this command.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_sg_clean(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct scatterlist *sg = qc->sg;
-	int dir = qc->dma_dir;
-
-	WARN_ON_ONCE(sg == NULL);
-
-	VPRINTK("unmapping %u sg elements\n", qc->n_elem);
-
-	if (qc->n_elem)
-		dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
-
-	qc->flags &= ~ATA_QCFLAG_DMAMAP;
-	qc->sg = NULL;
-}
-
-/**
  *	atapi_check_dma - Check whether ATAPI DMA can be supported
  *	@qc: Metadata associated with taskfile to check
  *
@@ -4925,6 +4899,34 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 	qc->cursg = qc->sg;
 }
 
+#ifdef CONFIG_HAS_DMA
+
+/**
+ *	ata_sg_clean - Unmap DMA memory associated with command
+ *	@qc: Command containing DMA memory to be released
+ *
+ *	Unmap all mapped DMA memory associated with this command.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_sg_clean(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg = qc->sg;
+	int dir = qc->dma_dir;
+
+	WARN_ON_ONCE(sg == NULL);
+
+	VPRINTK("unmapping %u sg elements\n", qc->n_elem);
+
+	if (qc->n_elem)
+		dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
+
+	qc->flags &= ~ATA_QCFLAG_DMAMAP;
+	qc->sg = NULL;
+}
+
 /**
  *	ata_sg_setup - DMA-map the scatter-gather table associated with a command.
  *	@qc: Command with scatter-gather table to be mapped.
@@ -4957,6 +4959,13 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+#else /* !CONFIG_HAS_DMA */
+
+static inline void ata_sg_clean(struct ata_queued_cmd *qc) {}
+static inline int ata_sg_setup(struct ata_queued_cmd *qc) { return -1; }
+
+#endif /* !CONFIG_HAS_DMA */
+
 /**
  *	swap_buf_le16 - swap halves of 16-bit words in place
  *	@buf:  Buffer to swap
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 50ee10db160f..4e5bf36c5f46 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2607,21 +2607,39 @@ static void ata_eh_link_report(struct ata_link *link)
 				[DMA_TO_DEVICE]		= "out",
 				[DMA_FROM_DEVICE]	= "in",
 			};
-			static const char *prot_str[] = {
-				[ATA_PROT_UNKNOWN]	= "unknown",
-				[ATA_PROT_NODATA]	= "nodata",
-				[ATA_PROT_PIO]		= "pio",
-				[ATA_PROT_DMA]		= "dma",
-				[ATA_PROT_NCQ]		= "ncq dma",
-				[ATA_PROT_NCQ_NODATA]	= "ncq nodata",
-				[ATAPI_PROT_NODATA]	= "nodata",
-				[ATAPI_PROT_PIO]	= "pio",
-				[ATAPI_PROT_DMA]	= "dma",
-			};
+			const char *prot_str = NULL;
 
+			switch (qc->tf.protocol) {
+			case ATA_PROT_UNKNOWN:
+				prot_str = "unknown";
+				break;
+			case ATA_PROT_NODATA:
+				prot_str = "nodata";
+				break;
+			case ATA_PROT_PIO:
+				prot_str = "pio";
+				break;
+			case ATA_PROT_DMA:
+				prot_str = "dma";
+				break;
+			case ATA_PROT_NCQ:
+				prot_str = "ncq dma";
+				break;
+			case ATA_PROT_NCQ_NODATA:
+				prot_str = "ncq nodata";
+				break;
+			case ATAPI_PROT_NODATA:
+				prot_str = "nodata";
+				break;
+			case ATAPI_PROT_PIO:
+				prot_str = "pio";
+				break;
+			case ATAPI_PROT_DMA:
+				prot_str = "dma";
+				break;
+			}
 			snprintf(data_buf, sizeof(data_buf), " %s %u %s",
-				 prot_str[qc->tf.protocol], qc->nbytes,
-				 dma_str[qc->dma_dir]);
+				 prot_str, qc->nbytes, dma_str[qc->dma_dir]);
 		}
 
 		if (ata_is_atapi(qc->tf.protocol)) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index c771d4c341ea..12d3a66600a3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -484,13 +484,6 @@ struct device_attribute *ata_common_sdev_attrs[] = {
 };
 EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
 
-static void ata_scsi_invalid_field(struct ata_device *dev,
-				   struct scsi_cmnd *cmd, u16 field)
-{
-	ata_scsi_set_invalid_field(dev, cmd, field, 0xff);
-	cmd->scsi_done(cmd);
-}
-
 /**
  *	ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
  *	@sdev: SCSI device for which BIOS geometry is to be determined
@@ -2057,6 +2050,12 @@ defer:
 		return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+struct ata_scsi_args {
+	struct ata_device	*dev;
+	u16			*id;
+	struct scsi_cmnd	*cmd;
+};
+
 /**
  *	ata_scsi_rbuf_get - Map response buffer.
  *	@cmd: SCSI command containing buffer to be mapped.
@@ -2133,7 +2132,6 @@ static void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
 
 	if (rc == 0)
 		cmd->result = SAM_STAT_GOOD;
-	args->done(cmd);
 }
 
 /**
@@ -2455,23 +2453,6 @@ static unsigned int ata_scsiop_inq_b6(struct ata_scsi_args *args, u8 *rbuf)
 }
 
 /**
- *	ata_scsiop_noop - Command handler that simply returns success.
- *	@args: device IDENTIFY data / SCSI command of interest.
- *	@rbuf: Response buffer, to which simulated SCSI cmd output is sent.
- *
- *	No operation.  Simply returns success to caller, to indicate
- *	that the caller should successfully complete this SCSI command.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf)
-{
-	VPRINTK("ENTER\n");
-	return 0;
-}
-
-/**
  *	modecpy - Prepare response for MODE SENSE
  *	@dest: output buffer
  *	@src: data being copied
@@ -2873,6 +2854,26 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
 	DPRINTK("EXIT\n");
 }
 
+/*
+ * ATAPI devices typically report zero for their SCSI version, and sometimes
+ * deviate from the spec WRT response data format.  If SCSI version is
+ * reported as zero like normal, then we make the following fixups:
+ *   1) Fake MMC-5 version, to indicate to the Linux scsi midlayer this is a
+ *	modern device.
+ *   2) Ensure response data format / ATAPI information are always correct.
+ */
+static void atapi_fixup_inquiry(struct scsi_cmnd *cmd)
+{
+	u8 buf[4];
+
+	sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, 4);
+	if (buf[2] == 0) {
+		buf[2] = 0x5;
+		buf[3] = 0x32;
+	}
+	sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, 4);
+}
+
 static void atapi_qc_complete(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *cmd = qc->scsicmd;
@@ -2927,30 +2928,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 		 */
 		ata_gen_passthru_sense(qc);
 	} else {
-		u8 *scsicmd = cmd->cmnd;
-
-		if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
-			unsigned long flags;
-			u8 *buf;
-
-			buf = ata_scsi_rbuf_get(cmd, true, &flags);
-
-	/* ATAPI devices typically report zero for their SCSI version,
-	 * and sometimes deviate from the spec WRT response data
-	 * format.  If SCSI version is reported as zero like normal,
-	 * then we make the following fixups:  1) Fake MMC-5 version,
-	 * to indicate to the Linux scsi midlayer this is a modern
-	 * device.  2) Ensure response data format / ATAPI information
-	 * are always correct.
-	 */
-			if (buf[2] == 0) {
-				buf[2] = 0x5;
-				buf[3] = 0x32;
-			}
-
-			ata_scsi_rbuf_put(cmd, true, &flags);
-		}
-
+		if (cmd->cmnd[0] == INQUIRY && (cmd->cmnd[1] & 0x03) == 0)
+			atapi_fixup_inquiry(cmd);
 		cmd->result = SAM_STAT_GOOD;
 	}
 
@@ -4352,12 +4331,11 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 	args.dev = dev;
 	args.id = dev->id;
 	args.cmd = cmd;
-	args.done = cmd->scsi_done;
 
 	switch(scsicmd[0]) {
 	case INQUIRY:
 		if (scsicmd[1] & 2)		   /* is CmdDt set?  */
-		    ata_scsi_invalid_field(dev, cmd, 1);
+			ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
 		else if ((scsicmd[1] & 1) == 0)    /* is EVPD clear? */
 			ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
 		else switch (scsicmd[2]) {
@@ -4389,7 +4367,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 			}
 			/* Fallthrough */
 		default:
-			ata_scsi_invalid_field(dev, cmd, 2);
+			ata_scsi_set_invalid_field(dev, cmd, 2, 0xff);
 			break;
 		}
 		break;
@@ -4407,7 +4385,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 		if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
 			ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
 		else
-			ata_scsi_invalid_field(dev, cmd, 1);
+			ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
 		break;
 
 	case REPORT_LUNS:
@@ -4417,7 +4395,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 	case REQUEST_SENSE:
 		ata_scsi_set_sense(dev, cmd, 0, 0, 0);
 		cmd->result = (DRIVER_SENSE << 24);
-		cmd->scsi_done(cmd);
 		break;
 
 	/* if we reach this, then writeback caching is disabled,
@@ -4431,31 +4408,29 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 	case SEEK_6:
 	case SEEK_10:
 	case TEST_UNIT_READY:
-		ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
 		break;
 
 	case SEND_DIAGNOSTIC:
 		tmp8 = scsicmd[1] & ~(1 << 3);
-		if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4]))
-			ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
-		else
-			ata_scsi_invalid_field(dev, cmd, 1);
+		if (tmp8 != 0x4 || scsicmd[3] || scsicmd[4])
+			ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
 		break;
 
 	case MAINTENANCE_IN:
 		if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES)
 			ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in);
 		else
-			ata_scsi_invalid_field(dev, cmd, 1);
+			ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
 		break;
 
 	/* all other commands */
 	default:
 		ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x20, 0x0);
 		/* "Invalid command operation code" */
-		cmd->scsi_done(cmd);
 		break;
 	}
+
+	cmd->scsi_done(cmd);
 }
 
 int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 051b6158d1b7..2bd92dca3e62 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -542,7 +542,7 @@ static inline void ata_tf_to_host(struct ata_port *ap,
 
 /**
  *	ata_sff_data_xfer - Transfer data by PIO
- *	@dev: device to target
+ *	@qc: queued command
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@rw: read/write
@@ -555,10 +555,10 @@ static inline void ata_tf_to_host(struct ata_port *ap,
  *	RETURNS:
  *	Bytes consumed.
  */
-unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
+unsigned int ata_sff_data_xfer(struct ata_queued_cmd *qc, unsigned char *buf,
 			       unsigned int buflen, int rw)
 {
-	struct ata_port *ap = dev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 	void __iomem *data_addr = ap->ioaddr.data_addr;
 	unsigned int words = buflen >> 1;
 
@@ -595,7 +595,7 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
 
 /**
  *	ata_sff_data_xfer32 - Transfer data by PIO
- *	@dev: device to target
+ *	@qc: queued command
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@rw: read/write
@@ -610,16 +610,17 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
  *	Bytes consumed.
  */
 
-unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
+unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf,
 			       unsigned int buflen, int rw)
 {
+	struct ata_device *dev = qc->dev;
 	struct ata_port *ap = dev->link->ap;
 	void __iomem *data_addr = ap->ioaddr.data_addr;
 	unsigned int words = buflen >> 2;
 	int slop = buflen & 3;
 
 	if (!(ap->pflags & ATA_PFLAG_PIO32))
-		return ata_sff_data_xfer(dev, buf, buflen, rw);
+		return ata_sff_data_xfer(qc, buf, buflen, rw);
 
 	/* Transfer multiple of 4 bytes */
 	if (rw == READ)
@@ -658,7 +659,7 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
 /**
  *	ata_sff_data_xfer_noirq - Transfer data by PIO
- *	@dev: device to target
+ *	@qc: queued command
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@rw: read/write
@@ -672,14 +673,14 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
  *	RETURNS:
  *	Bytes consumed.
  */
-unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+unsigned int ata_sff_data_xfer_noirq(struct ata_queued_cmd *qc, unsigned char *buf,
 				     unsigned int buflen, int rw)
 {
 	unsigned long flags;
 	unsigned int consumed;
 
 	local_irq_save(flags);
-	consumed = ata_sff_data_xfer32(dev, buf, buflen, rw);
+	consumed = ata_sff_data_xfer32(qc, buf, buflen, rw);
 	local_irq_restore(flags);
 
 	return consumed;
@@ -723,14 +724,14 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 		buf = kmap_atomic(page);
 
 		/* do the actual data transfer */
-		ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+		ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size,
 				       do_write);
 
 		kunmap_atomic(buf);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+		ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size,
 				       do_write);
 	}
 
@@ -791,7 +792,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	DPRINTK("send cdb\n");
 	WARN_ON_ONCE(qc->dev->cdb_len < 12);
 
-	ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
+	ap->ops->sff_data_xfer(qc, qc->cdb, qc->dev->cdb_len, 1);
 	ata_sff_sync(ap);
 	/* FIXME: If the CDB is for DMA do we need to do the transition delay
 	   or is bmdma_start guaranteed to do it ? */
@@ -868,14 +869,14 @@ next_sg:
 		buf = kmap_atomic(page);
 
 		/* do the actual data transfer */
-		consumed = ap->ops->sff_data_xfer(dev,  buf + offset,
+		consumed = ap->ops->sff_data_xfer(qc, buf + offset,
 								count, rw);
 
 		kunmap_atomic(buf);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		consumed = ap->ops->sff_data_xfer(dev,  buf + offset,
+		consumed = ap->ops->sff_data_xfer(qc, buf + offset,
 								count, rw);
 	}
 
@@ -2427,11 +2428,21 @@ int ata_pci_sff_activate_host(struct ata_host *host,
 		return rc;
 
 	if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
-		u8 tmp8, mask;
+		u8 tmp8, mask = 0;
 
-		/* TODO: What if one channel is in native mode ... */
+		/*
+		 * ATA spec says we should use legacy mode when one
+		 * port is in legacy mode, but disabled ports on some
+		 * PCI hosts appear as fixed legacy ports, e.g SB600/700
+		 * on which the secondary port is not wired, so
+		 * ignore ports that are marked as 'dummy' during
+		 * this check
+		 */
 		pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
-		mask = (1 << 2) | (1 << 0);
+		if (!ata_port_is_dummy(host->ports[0]))
+			mask |= (1 << 0);
+		if (!ata_port_is_dummy(host->ports[1]))
+			mask |= (1 << 2);
 		if ((tmp8 & mask) != mask)
 			legacy_mode = 1;
 	}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 06d479d1f302..120fce0befd3 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -31,13 +31,6 @@
 #define DRV_NAME	"libata"
 #define DRV_VERSION	"3.00"	/* must be exactly four chars */
 
-struct ata_scsi_args {
-	struct ata_device	*dev;
-	u16			*id;
-	struct scsi_cmnd	*cmd;
-	void			(*done)(struct scsi_cmnd *);
-};
-
 /* libata-core.c */
 enum {
 	/* flags for ata_dev_read_id() */
@@ -89,7 +82,6 @@ extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern unsigned int ata_dev_set_feature(struct ata_device *dev,
 					u8 enable, u8 feature);
-extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 1611e0e8d767..fd5b34f0d007 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -286,10 +286,10 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	set_smc_timing(ap->dev, adev, info, &timing);
 }
 
-static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+static unsigned int pata_at91_data_xfer_noirq(struct ata_queued_cmd *qc,
 		unsigned char *buf, unsigned int buflen, int rw)
 {
-	struct at91_ide_info *info = dev->link->ap->host->private_data;
+	struct at91_ide_info *info = qc->dev->link->ap->host->private_data;
 	unsigned int consumed;
 	unsigned int mode;
 	unsigned long flags;
@@ -301,7 +301,7 @@ static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
 	regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
 			    AT91_SMC_DBW_16);
 
-	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+	consumed = ata_sff_data_xfer(qc, buf, buflen, rw);
 
 	/* restore 8bit mode after data is written */
 	regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 49d705c9f0f7..6c9aa95a9a05 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -278,6 +278,11 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &info, &info };
 
+	/* SB600/700 don't have secondary port wired */
+	if ((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE) ||
+		(pdev->device == PCI_DEVICE_ID_ATI_IXP700_IDE))
+		ppi[1] = &ata_dummy_port_info;
+
 	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
 				      ATA_HOST_PARALLEL_SCAN);
 }
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index ec748d31928d..9c5780a7e1b9 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1143,7 +1143,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
 
 /**
  *	bfin_data_xfer - Transfer data by PIO
- *	@adev: device for this I/O
+ *	@qc: queued command
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@write_data: read/write
@@ -1151,10 +1151,11 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
  *	Note: Original code is ata_sff_data_xfer().
  */
 
-static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
+static unsigned int bfin_data_xfer(struct ata_queued_cmd *qc,
+				   unsigned char *buf,
 				   unsigned int buflen, int rw)
 {
-	struct ata_port *ap = dev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 	unsigned int words = buflen >> 1;
 	unsigned short *buf16 = (u16 *)buf;
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index bd6b089c67a3..bf1b910c5d69 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -474,11 +474,11 @@ static void ep93xx_pata_set_devctl(struct ata_port *ap, u8 ctl)
 }
 
 /* Note: original code is ata_sff_data_xfer */
-static unsigned int ep93xx_pata_data_xfer(struct ata_device *adev,
+static unsigned int ep93xx_pata_data_xfer(struct ata_queued_cmd *qc,
 					  unsigned char *buf,
 					  unsigned int buflen, int rw)
 {
-	struct ata_port *ap = adev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 	struct ep93xx_pata_data *drv_data = ap->host->private_data;
 	u16 *data = (u16 *)buf;
 	unsigned int words = buflen >> 1;
diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
new file mode 100644
index 000000000000..5b0c57d1c59f
--- /dev/null
+++ b/drivers/ata/pata_falcon.c
@@ -0,0 +1,184 @@
+/*
+ * Atari Falcon PATA controller driver
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on falconide.c:
+ *
+ *     Created 12 Jul 1997 by Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_stdma.h>
+#include <asm/ide.h>
+
+#define DRV_NAME "pata_falcon"
+#define DRV_VERSION "0.1.0"
+
+#define ATA_HD_BASE	0xfff00000
+#define ATA_HD_CONTROL	0x39
+
+static struct scsi_host_template pata_falcon_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc,
+					  unsigned char *buf,
+					  unsigned int buflen, int rw)
+{
+	struct ata_device *dev = qc->dev;
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1;
+	struct scsi_cmnd *cmd = qc->scsicmd;
+	bool swap = 1;
+
+	if (dev->class == ATA_DEV_ATA && cmd && cmd->request &&
+	    !blk_rq_is_passthrough(cmd->request))
+		swap = 0;
+
+	/* Transfer multiple of 2 bytes */
+	if (rw == READ) {
+		if (swap)
+			raw_insw_swapw((u16 *)data_addr, (u16 *)buf, words);
+		else
+			raw_insw((u16 *)data_addr, (u16 *)buf, words);
+	} else {
+		if (swap)
+			raw_outsw_swapw((u16 *)data_addr, (u16 *)buf, words);
+		else
+			raw_outsw((u16 *)data_addr, (u16 *)buf, words);
+	}
+
+	/* Transfer trailing byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		unsigned char pad[2] = { };
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - 1;
+
+		if (rw == READ) {
+			if (swap)
+				raw_insw_swapw((u16 *)data_addr, (u16 *)pad, 1);
+			else
+				raw_insw((u16 *)data_addr, (u16 *)pad, 1);
+			*buf = pad[0];
+		} else {
+			pad[0] = *buf;
+			if (swap)
+				raw_outsw_swapw((u16 *)data_addr, (u16 *)pad, 1);
+			else
+				raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
+		}
+		words++;
+	}
+
+	return words << 1;
+}
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_falcon_set_mode(struct ata_link *link,
+				struct ata_device **unused)
+{
+	struct ata_device *dev;
+
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_info(dev, "configured for PIO\n");
+	}
+	return 0;
+}
+
+static struct ata_port_operations pata_falcon_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.sff_data_xfer	= pata_falcon_data_xfer,
+	.cable_detect	= ata_cable_unknown,
+	.set_mode	= pata_falcon_set_mode,
+};
+
+static int pata_falcon_init_one(void)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	struct platform_device *pdev;
+	void __iomem *base;
+
+	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
+		return -ENODEV;
+
+	pr_info(DRV_NAME ": Atari Falcon PATA controller\n");
+
+	pdev = platform_device_register_simple(DRV_NAME, 0, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	if (!devm_request_mem_region(&pdev->dev, ATA_HD_BASE, 0x40, DRV_NAME)) {
+		pr_err(DRV_NAME ": resources busy\n");
+		return -EBUSY;
+	}
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = &pata_falcon_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+	ap->flags |= ATA_FLAG_PIO_POLLING;
+
+	base = (void __iomem *)ATA_HD_BASE;
+	ap->ioaddr.data_addr		= base;
+	ap->ioaddr.error_addr		= base + 1 + 1 * 4;
+	ap->ioaddr.feature_addr		= base + 1 + 1 * 4;
+	ap->ioaddr.nsect_addr		= base + 1 + 2 * 4;
+	ap->ioaddr.lbal_addr		= base + 1 + 3 * 4;
+	ap->ioaddr.lbam_addr		= base + 1 + 4 * 4;
+	ap->ioaddr.lbah_addr		= base + 1 + 5 * 4;
+	ap->ioaddr.device_addr		= base + 1 + 6 * 4;
+	ap->ioaddr.status_addr		= base + 1 + 7 * 4;
+	ap->ioaddr.command_addr		= base + 1 + 7 * 4;
+
+	ap->ioaddr.altstatus_addr	= base + ATA_HD_CONTROL;
+	ap->ioaddr.ctl_addr		= base + ATA_HD_CONTROL;
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
+		      (unsigned long)base + ATA_HD_CONTROL);
+
+	/* activate */
+	return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
+}
+
+module_init(pata_falcon_init_one);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index abda44183512..0b0d93065f5a 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -40,13 +40,13 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
 	return 0;
 }
 
-static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
+static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
 				unsigned char *buf, unsigned int buflen, int rw)
 {
 	unsigned int i;
 	unsigned int words = buflen >> 1;
 	u16 *buf16 = (u16 *) buf;
-	struct ata_port *ap = dev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 	void __iomem *mmio = ap->ioaddr.data_addr;
 	struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
 
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index bce2a8ca4678..53828b6c3044 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -303,11 +303,12 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
 }
 
-static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
+static unsigned int pdc_data_xfer_vlb(struct ata_queued_cmd *qc,
 			unsigned char *buf, unsigned int buflen, int rw)
 {
-	int slop = buflen & 3;
+	struct ata_device *dev = qc->dev;
 	struct ata_port *ap = dev->link->ap;
+	int slop = buflen & 3;
 
 	/* 32bit I/O capable *and* we need to write a whole number of dwords */
 	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
@@ -340,7 +341,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 		}
 		local_irq_restore(flags);
 	} else
-		buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
+		buflen = ata_sff_data_xfer_noirq(qc, buf, buflen, rw);
 
 	return buflen;
 }
@@ -702,9 +703,11 @@ static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
 	return ata_sff_qc_issue(qc);
 }
 
-static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
-					unsigned int buflen, int rw)
+static unsigned int vlb32_data_xfer(struct ata_queued_cmd *qc,
+				    unsigned char *buf,
+				    unsigned int buflen, int rw)
 {
+	struct ata_device *adev = qc->dev;
 	struct ata_port *ap = adev->link->ap;
 	int slop = buflen & 3;
 
@@ -727,7 +730,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
 		}
 		return (buflen + 3) & ~3;
 	} else
-		return ata_sff_data_xfer(adev, buf, buflen, rw);
+		return ata_sff_data_xfer(qc, buf, buflen, rw);
 }
 
 static int qdi_port(struct platform_device *dev,
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 475a00669427..f524a9099d01 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -138,9 +138,7 @@ static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
 	int trh;
 	int pause;
 	/* These names are timing parameters from the ATA spec */
-	int t1;
 	int t2;
-	int t2i;
 
 	/*
 	 * A divisor value of four will overflow the timing fields at
@@ -154,15 +152,9 @@ static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
 
 	BUG_ON(ata_timing_compute(dev, dev->pio_mode, &timing, T, T));
 
-	t1 = timing.setup;
-	if (t1)
-		t1--;
 	t2 = timing.active;
 	if (t2)
 		t2--;
-	t2i = timing.act8b;
-	if (t2i)
-		t2i--;
 
 	trh = ns_to_tim_reg(div, 20);
 	if (trh)
@@ -293,17 +285,17 @@ static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev)
 /**
  * Handle an 8 bit I/O request.
  *
- * @dev:        Device to access
+ * @qc:         Queued command
  * @buffer:     Data buffer
  * @buflen:     Length of the buffer.
  * @rw:         True to write.
  */
-static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
+static unsigned int octeon_cf_data_xfer8(struct ata_queued_cmd *qc,
 					 unsigned char *buffer,
 					 unsigned int buflen,
 					 int rw)
 {
-	struct ata_port *ap		= dev->link->ap;
+	struct ata_port *ap		= qc->dev->link->ap;
 	void __iomem *data_addr		= ap->ioaddr.data_addr;
 	unsigned long words;
 	int count;
@@ -332,17 +324,17 @@ static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
 /**
  * Handle a 16 bit I/O request.
  *
- * @dev:        Device to access
+ * @qc:         Queued command
  * @buffer:     Data buffer
  * @buflen:     Length of the buffer.
  * @rw:         True to write.
  */
-static unsigned int octeon_cf_data_xfer16(struct ata_device *dev,
+static unsigned int octeon_cf_data_xfer16(struct ata_queued_cmd *qc,
 					  unsigned char *buffer,
 					  unsigned int buflen,
 					  int rw)
 {
-	struct ata_port *ap		= dev->link->ap;
+	struct ata_port *ap		= qc->dev->link->ap;
 	void __iomem *data_addr		= ap->ioaddr.data_addr;
 	unsigned long words;
 	int count;
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index b6b7af894d9d..201a32d0627f 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -32,7 +32,6 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
 	unsigned int reg_shift = 0;
 	int pio_mode = 0;
 	int pio_mask;
-	const u32 *prop;
 
 	ret = of_address_to_resource(dn, 0, &io_res);
 	if (ret) {
@@ -50,13 +49,9 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
 
 	irq_res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
 
-	prop = of_get_property(dn, "reg-shift", NULL);
-	if (prop)
-		reg_shift = be32_to_cpup(prop);
+	of_property_read_u32(dn, "reg-shift", &reg_shift);
 
-	prop = of_get_property(dn, "pio-mode", NULL);
-	if (prop) {
-		pio_mode = be32_to_cpup(prop);
+	if (!of_property_read_u32(dn, "pio-mode", &pio_mode)) {
 		if (pio_mode > 6) {
 			dev_err(&ofdev->dev, "invalid pio-mode\n");
 			return -EINVAL;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index bcc4b968c049..a541eacc5e95 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -90,7 +90,7 @@ static int pcmcia_set_mode_8bit(struct ata_link *link,
 
 /**
  *	ata_data_xfer_8bit	 -	Transfer data by 8bit PIO
- *	@dev: device to target
+ *	@qc: queued command
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@rw: read/write
@@ -101,10 +101,10 @@ static int pcmcia_set_mode_8bit(struct ata_link *link,
  *	Inherited from caller.
  */
 
-static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
+static unsigned int ata_data_xfer_8bit(struct ata_queued_cmd *qc,
 				unsigned char *buf, unsigned int buflen, int rw)
 {
-	struct ata_port *ap = dev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 
 	if (rw == READ)
 		ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index f6facd686f94..431c7de30ce6 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -263,10 +263,10 @@ static u8 pata_s3c_check_altstatus(struct ata_port *ap)
 /*
  * pata_s3c_data_xfer - Transfer data by PIO
  */
-static unsigned int pata_s3c_data_xfer(struct ata_device *dev,
+static unsigned int pata_s3c_data_xfer(struct ata_queued_cmd *qc,
 				unsigned char *buf, unsigned int buflen, int rw)
 {
-	struct ata_port *ap = dev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 	struct s3c_ide_info *info = ap->host->private_data;
 	void __iomem *data_addr = ap->ioaddr.data_addr;
 	unsigned int words = buflen >> 1, i;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2f32782cea6d..00ce26d0c047 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4067,6 +4067,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct mv_host_priv *hpriv;
 	struct resource *res;
+	void __iomem *mmio;
 	int n_ports = 0, irq = 0;
 	int rc;
 	int port;
@@ -4085,8 +4086,9 @@ static int mv_platform_probe(struct platform_device *pdev)
 	 * Get the register base first
 	 */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL)
-		return -EINVAL;
+	mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mmio))
+		return PTR_ERR(mmio);
 
 	/* allocate host */
 	if (pdev->dev.of_node) {
@@ -4130,12 +4132,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	hpriv->board_idx = chip_soc;
 
 	host->iomap = NULL;
-	hpriv->base = devm_ioremap(&pdev->dev, res->start,
-				   resource_size(res));
-	if (!hpriv->base)
-		return -ENOMEM;
-
-	hpriv->base -= SATAHC0_REG_BASE;
+	hpriv->base = mmio - SATAHC0_REG_BASE;
 
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
@@ -4529,7 +4526,7 @@ static void __exit mv_exit(void)
 
 MODULE_AUTHOR("Brett Russ");
 MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index f72d601e300a..5d38245a7a73 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -447,11 +447,11 @@ static void sata_rcar_exec_command(struct ata_port *ap,
 	ata_sff_pause(ap);
 }
 
-static unsigned int sata_rcar_data_xfer(struct ata_device *dev,
+static unsigned int sata_rcar_data_xfer(struct ata_queued_cmd *qc,
 					      unsigned char *buf,
 					      unsigned int buflen, int rw)
 {
-	struct ata_port *ap = dev->link->ap;
+	struct ata_port *ap = qc->dev->link->ap;
 	void __iomem *data_addr = ap->ioaddr.data_addr;
 	unsigned int words = buflen >> 1;