watchdog: db8500_wdt: Rename driver

This driver is named after the ambition to support more SoCs than
the DB8500. Those were never produced, so cut down the scope and
rename the driver accordingly. Since the Kconfig for the watchdog
defaults to y this will still be built by default.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210922230947.1864357-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

1 files changed, 0 insertions, 152 deletions

diff --git a/drivers/watchdog/ux500_wdt.c b/drivers/watchdog/ux500_wdt.c
deleted file mode 100644
index 40f8cf1cb234..000000000000
--- a/drivers/watchdog/ux500_wdt.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson SA 2011-2013
- *
- * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/err.h>
-#include <linux/uaccess.h>
-#include <linux/watchdog.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/dbx500-prcmu.h>
-
-#define WATCHDOG_TIMEOUT 600 /* 10 minutes */
-
-#define WATCHDOG_MIN	0
-#define WATCHDOG_MAX28	268435  /* 28 bit resolution in ms == 268435.455 s */
-
-static unsigned int timeout = WATCHDOG_TIMEOUT;
-module_param(timeout, uint, 0);
-MODULE_PARM_DESC(timeout,
-	"Watchdog timeout in seconds. default="
-				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
-
-static bool nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout,
-	"Watchdog cannot be stopped once started (default="
-				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-static int ux500_wdt_start(struct watchdog_device *wdd)
-{
-	return prcmu_enable_a9wdog(PRCMU_WDOG_ALL);
-}
-
-static int ux500_wdt_stop(struct watchdog_device *wdd)
-{
-	return prcmu_disable_a9wdog(PRCMU_WDOG_ALL);
-}
-
-static int ux500_wdt_keepalive(struct watchdog_device *wdd)
-{
-	return prcmu_kick_a9wdog(PRCMU_WDOG_ALL);
-}
-
-static int ux500_wdt_set_timeout(struct watchdog_device *wdd,
-				 unsigned int timeout)
-{
-	ux500_wdt_stop(wdd);
-	prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
-	ux500_wdt_start(wdd);
-
-	return 0;
-}
-
-static const struct watchdog_info ux500_wdt_info = {
-	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-	.identity = "Ux500 WDT",
-	.firmware_version = 1,
-};
-
-static const struct watchdog_ops ux500_wdt_ops = {
-	.owner = THIS_MODULE,
-	.start = ux500_wdt_start,
-	.stop  = ux500_wdt_stop,
-	.ping  = ux500_wdt_keepalive,
-	.set_timeout = ux500_wdt_set_timeout,
-};
-
-static struct watchdog_device ux500_wdt = {
-	.info = &ux500_wdt_info,
-	.ops = &ux500_wdt_ops,
-	.min_timeout = WATCHDOG_MIN,
-	.max_timeout = WATCHDOG_MAX28,
-};
-
-static int ux500_wdt_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	int ret;
-
-	timeout = 600; /* Default to 10 minutes */
-	ux500_wdt.parent = dev;
-	watchdog_set_nowayout(&ux500_wdt, nowayout);
-
-	/* disable auto off on sleep */
-	prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
-
-	/* set HW initial value */
-	prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
-
-	ret = devm_watchdog_register_device(dev, &ux500_wdt);
-	if (ret)
-		return ret;
-
-	dev_info(dev, "initialized\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ux500_wdt_suspend(struct platform_device *pdev,
-			     pm_message_t state)
-{
-	if (watchdog_active(&ux500_wdt)) {
-		ux500_wdt_stop(&ux500_wdt);
-		prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true);
-
-		prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
-		ux500_wdt_start(&ux500_wdt);
-	}
-	return 0;
-}
-
-static int ux500_wdt_resume(struct platform_device *pdev)
-{
-	if (watchdog_active(&ux500_wdt)) {
-		ux500_wdt_stop(&ux500_wdt);
-		prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
-
-		prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
-		ux500_wdt_start(&ux500_wdt);
-	}
-	return 0;
-}
-#else
-#define ux500_wdt_suspend NULL
-#define ux500_wdt_resume NULL
-#endif
-
-static struct platform_driver ux500_wdt_driver = {
-	.probe		= ux500_wdt_probe,
-	.suspend	= ux500_wdt_suspend,
-	.resume		= ux500_wdt_resume,
-	.driver		= {
-		.name	= "ux500_wdt",
-	},
-};
-
-module_platform_driver(ux500_wdt_driver);
-
-MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>");
-MODULE_DESCRIPTION("Ux500 Watchdog Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ux500_wdt");