Merge tag 'drm-misc-next-2019-10-09-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.5:

UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
    not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)

Cross-subsystem Changes:
-MAINTAINERS:
 -Add Alyssa & Steven as panfrost reviewers (Rob)
 -Add Jernej as DE2 reviewer (Maxime)
 -Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)

Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
 -Add lazy unmapping for gem bo's (Thomas)
 -Unify and rationalize vram mm and gem vram (Thomas)
 -Expose vmap and vunmap for gem vram objects (Thomas)
 -Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)

Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
 -Add error event printing (behind CONFIG) and reg dump support (Lowry)
 -Add suspend/resume support (Lowry)
 -Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
 -Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
 -A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
 -Add module param to switch resource reuse workaround on/off (Gerd)
 -Avoid calling vmexit while holding spinlock (Gerd)
 -Use gem shmem helpers instead of ttm (Gerd)
 -Accommodate command buffer allocations too big for cma (David)

Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST
# gpg:                using RSA key 732C002572DCAF79
# gpg: Can't check signature: public key not found

# Conflicts:
#	drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
#	drivers/gpu/drm/i915/i915_drv.c
#	drivers/gpu/drm/i915/i915_gem.c
#	drivers/gpu/drm/i915/i915_gem_gtt.c
#	drivers/gpu/drm/i915/i915_vma.c
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay

3 files changed, 9 insertions, 29 deletions

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index e6a1c805064f..95c32952fa8a 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1758,21 +1758,19 @@ EXPORT_SYMBOL(remove_conflicting_framebuffers);
 /**
  * remove_conflicting_pci_framebuffers - remove firmware-configured framebuffers for PCI devices
  * @pdev: PCI device
- * @res_id: index of PCI BAR configuring framebuffer memory
  * @name: requesting driver name
  *
  * This function removes framebuffer devices (eg. initialized by firmware)
- * using memory range configured for @pdev's BAR @res_id.
+ * using memory range configured for any of @pdev's memory bars.
  *
  * The function assumes that PCI device with shadowed ROM drives a primary
  * display and so kicks out vga16fb.
  */
-int remove_conflicting_pci_framebuffers(struct pci_dev *pdev, int res_id, const char *name)
+int remove_conflicting_pci_framebuffers(struct pci_dev *pdev, const char *name)
 {
 	struct apertures_struct *ap;
 	bool primary = false;
 	int err, idx, bar;
-	bool res_id_found = false;
 
 	for (idx = 0, bar = 0; bar < PCI_ROM_RESOURCE; bar++) {
 		if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
@@ -1789,16 +1787,11 @@ int remove_conflicting_pci_framebuffers(struct pci_dev *pdev, int res_id, const
 			continue;
 		ap->ranges[idx].base = pci_resource_start(pdev, bar);
 		ap->ranges[idx].size = pci_resource_len(pdev, bar);
-		pci_info(pdev, "%s: bar %d: 0x%lx -> 0x%lx\n", __func__, bar,
-			 (unsigned long)pci_resource_start(pdev, bar),
-			 (unsigned long)pci_resource_end(pdev, bar));
+		pci_dbg(pdev, "%s: bar %d: 0x%lx -> 0x%lx\n", __func__, bar,
+			(unsigned long)pci_resource_start(pdev, bar),
+			(unsigned long)pci_resource_end(pdev, bar));
 		idx++;
-		if (res_id == bar)
-			res_id_found = true;
 	}
-	if (!res_id_found)
-		pci_warn(pdev, "%s: passed res_id (%d) is not a memory bar\n",
-			 __func__, res_id);
 
 #ifdef CONFIG_X86
 	primary = pdev->resource[PCI_ROM_RESOURCE].flags &
diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index ae2bcfee338a..81ad3aa1ca06 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -968,19 +968,6 @@ static void sa1100fb_task(struct work_struct *w)
 
 #ifdef CONFIG_CPU_FREQ
 /*
- * Calculate the minimum DMA period over all displays that we own.
- * This, together with the SDRAM bandwidth defines the slowest CPU
- * frequency that can be selected.
- */
-static unsigned int sa1100fb_min_dma_period(struct sa1100fb_info *fbi)
-{
-	/*
-	 * FIXME: we need to verify _all_ consoles.
-	 */
-	return sa1100fb_display_dma_period(&fbi->fb.var);
-}
-
-/*
  * CPU clock speed change handler.  We need to adjust the LCD timing
  * parameters when the CPU clock is adjusted by the power management
  * subsystem.
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index b939bc28d886..9c82e2a0a411 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -1576,12 +1576,12 @@ static int hdmi_avi_infoframe_unpack(struct hdmi_avi_infoframe *frame,
 	if (ptr[0] & 0x10)
 		frame->active_aspect = ptr[1] & 0xf;
 	if (ptr[0] & 0x8) {
-		frame->top_bar = (ptr[5] << 8) + ptr[6];
-		frame->bottom_bar = (ptr[7] << 8) + ptr[8];
+		frame->top_bar = (ptr[6] << 8) | ptr[5];
+		frame->bottom_bar = (ptr[8] << 8) | ptr[7];
 	}
 	if (ptr[0] & 0x4) {
-		frame->left_bar = (ptr[9] << 8) + ptr[10];
-		frame->right_bar = (ptr[11] << 8) + ptr[12];
+		frame->left_bar = (ptr[10] << 8) | ptr[9];
+		frame->right_bar = (ptr[12] << 8) | ptr[11];
 	}
 	frame->scan_mode = ptr[0] & 0x3;