usb: musb: core: Fix handling of the phy notifications

We currently can't unload omap2430 MUSB platform glue driver module and
this cause issues for fixing the MUSB code further. The reason we can't
remove omap2430 is because it uses the PHY functions and also exports the
omap_musb_mailbox function that some PHY drivers are using.

Let's fix the issue by exporting a more generic musb_mailbox function
from the MUSB core and allow platform glue layers to register phy_callback
function as needed.

And now we can now also get rid of the include/linux/musb-omap.h.

Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

4 files changed, 52 insertions, 28 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index cd37e9fc2e62..04548423094b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1702,6 +1702,23 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
 #define use_dma			0
 #endif
 
+static void (*musb_phy_callback)(enum musb_vbus_id_status status);
+
+/*
+ * musb_mailbox - optional phy notifier function
+ * @status phy state change
+ *
+ * Optionally gets called from the USB PHY. Note that the USB PHY must be
+ * disabled at the point the phy_callback is registered or unregistered.
+ */
+void musb_mailbox(enum musb_vbus_id_status status)
+{
+	if (musb_phy_callback)
+		musb_phy_callback(status);
+
+};
+EXPORT_SYMBOL_GPL(musb_mailbox);
+
 /*-------------------------------------------------------------------------*/
 
 static ssize_t
@@ -2114,6 +2131,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb->xceiv->io_ops = &musb_ulpi_access;
 	}
 
+	if (musb->ops->phy_callback)
+		musb_phy_callback = musb->ops->phy_callback;
+
 	pm_runtime_get_sync(musb->controller);
 
 	if (use_dma && dev->dma_mask) {
@@ -2292,6 +2312,7 @@ static int musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
+	musb_phy_callback = NULL;
 
 	if (musb->dma_controller)
 		musb_dma_controller_destroy(musb->dma_controller);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 2337d7a7d62d..fd215fb45fd4 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -168,6 +168,7 @@ struct musb_io;
  * @adjust_channel_params: pre check for standard dma channel_program func
  * @pre_root_reset_end: called before the root usb port reset flag gets cleared
  * @post_root_reset_end: called after the root usb port reset flag gets cleared
+ * @phy_callback: optional callback function for the phy to call
  */
 struct musb_platform_ops {
 
@@ -214,6 +215,7 @@ struct musb_platform_ops {
 				dma_addr_t *dma_addr, u32 *len);
 	void	(*pre_root_reset_end)(struct musb *musb);
 	void	(*post_root_reset_end)(struct musb *musb);
+	void	(*phy_callback)(enum musb_vbus_id_status status);
 };
 
 /*
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1bd9232ff76f..bf05f807729f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -36,7 +36,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/usb/musb-omap.h>
+#include <linux/usb/musb.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
@@ -46,7 +46,7 @@
 struct omap2430_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
-	enum omap_musb_vbus_id_status status;
+	enum musb_vbus_id_status status;
 	struct work_struct	omap_musb_mailbox_work;
 	struct device		*control_otghs;
 };
@@ -234,7 +234,7 @@ static inline void omap2430_low_level_init(struct musb *musb)
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
 
-void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
+static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
 
@@ -251,7 +251,6 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 
 	schedule_work(&glue->omap_musb_mailbox_work);
 }
-EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 
 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 {
@@ -262,7 +261,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 	struct usb_otg *otg = musb->xceiv->otg;
 
 	switch (glue->status) {
-	case OMAP_MUSB_ID_GROUND:
+	case MUSB_ID_GROUND:
 		dev_dbg(dev, "ID GND\n");
 
 		otg->default_a = true;
@@ -276,7 +275,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		}
 		break;
 
-	case OMAP_MUSB_VBUS_VALID:
+	case MUSB_VBUS_VALID:
 		dev_dbg(dev, "VBUS Connect\n");
 
 		otg->default_a = false;
@@ -287,8 +286,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
-	case OMAP_MUSB_ID_FLOAT:
-	case OMAP_MUSB_VBUS_OFF:
+	case MUSB_ID_FLOAT:
+	case MUSB_VBUS_OFF:
 		dev_dbg(dev, "VBUS Disconnect\n");
 
 		musb->xceiv->last_event = USB_EVENT_NONE;
@@ -430,7 +429,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
-	if (glue->status != OMAP_MUSB_UNKNOWN)
+	if (glue->status != MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
 	phy_init(musb->phy);
@@ -455,7 +454,7 @@ static void omap2430_musb_enable(struct musb *musb)
 
 	switch (glue->status) {
 
-	case OMAP_MUSB_ID_GROUND:
+	case MUSB_ID_GROUND:
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
@@ -474,7 +473,7 @@ static void omap2430_musb_enable(struct musb *musb)
 		}
 		break;
 
-	case OMAP_MUSB_VBUS_VALID:
+	case MUSB_VBUS_VALID:
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
@@ -488,7 +487,7 @@ static void omap2430_musb_disable(struct musb *musb)
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
-	if (glue->status != OMAP_MUSB_UNKNOWN)
+	if (glue->status != MUSB_UNKNOWN)
 		omap_control_usb_set_mode(glue->control_otghs,
 			USB_MODE_DISCONNECT);
 }
@@ -520,6 +519,8 @@ static const struct musb_platform_ops omap2430_ops = {
 
 	.enable		= omap2430_musb_enable,
 	.disable	= omap2430_musb_disable,
+
+	.phy_callback	= omap2430_musb_mailbox,
 };
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
@@ -551,7 +552,7 @@ static int omap2430_probe(struct platform_device *pdev)
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
-	glue->status			= OMAP_MUSB_UNKNOWN;
+	glue->status			= MUSB_UNKNOWN;
 	glue->control_otghs = ERR_PTR(-ENODEV);
 
 	if (np) {
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 12741856a75c..014dbbd72132 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/usb/musb-omap.h>
+#include <linux/usb/musb.h>
 #include <linux/usb/phy_companion.h>
 #include <linux/phy/omap_usb.h>
 #include <linux/i2c/twl.h>
@@ -102,7 +102,7 @@ struct twl6030_usb {
 
 	int			irq1;
 	int			irq2;
-	enum omap_musb_vbus_id_status linkstat;
+	enum musb_vbus_id_status linkstat;
 	u8			asleep;
 	bool			vbus_enable;
 	const char		*regulator;
@@ -189,13 +189,13 @@ static ssize_t twl6030_usb_vbus_show(struct device *dev,
 	spin_lock_irqsave(&twl->lock, flags);
 
 	switch (twl->linkstat) {
-	case OMAP_MUSB_VBUS_VALID:
+	case MUSB_VBUS_VALID:
 	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
 	       break;
-	case OMAP_MUSB_ID_GROUND:
+	case MUSB_ID_GROUND:
 	       ret = snprintf(buf, PAGE_SIZE, "id\n");
 	       break;
-	case OMAP_MUSB_VBUS_OFF:
+	case MUSB_VBUS_OFF:
 	       ret = snprintf(buf, PAGE_SIZE, "none\n");
 	       break;
 	default:
@@ -210,7 +210,7 @@ static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 {
 	struct twl6030_usb *twl = _twl;
-	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
 	u8 vbus_state, hw_state;
 	int ret;
 
@@ -225,14 +225,14 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 				dev_err(twl->dev, "Failed to enable usb3v3\n");
 
 			twl->asleep = 1;
-			status = OMAP_MUSB_VBUS_VALID;
+			status = MUSB_VBUS_VALID;
 			twl->linkstat = status;
-			omap_musb_mailbox(status);
+			musb_mailbox(status);
 		} else {
-			if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
-				status = OMAP_MUSB_VBUS_OFF;
+			if (twl->linkstat != MUSB_UNKNOWN) {
+				status = MUSB_VBUS_OFF;
 				twl->linkstat = status;
-				omap_musb_mailbox(status);
+				musb_mailbox(status);
 				if (twl->asleep) {
 					regulator_disable(twl->usb3v3);
 					twl->asleep = 0;
@@ -248,7 +248,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 {
 	struct twl6030_usb *twl = _twl;
-	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
 	u8 hw_state;
 	int ret;
 
@@ -262,9 +262,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 		twl->asleep = 1;
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
-		status = OMAP_MUSB_ID_GROUND;
+		status = MUSB_ID_GROUND;
 		twl->linkstat = status;
-		omap_musb_mailbox(status);
+		musb_mailbox(status);
 	} else  {
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -334,7 +334,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	twl->dev		= &pdev->dev;
 	twl->irq1		= platform_get_irq(pdev, 0);
 	twl->irq2		= platform_get_irq(pdev, 1);
-	twl->linkstat		= OMAP_MUSB_UNKNOWN;
+	twl->linkstat		= MUSB_UNKNOWN;
 
 	twl->comparator.set_vbus	= twl6030_set_vbus;
 	twl->comparator.start_srp	= twl6030_start_srp;