[PATCH] swsusp: switch pm_message_t to struct

This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

6 files changed, 16 insertions, 16 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c3e46d24a37e..c9412daff682 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1570,7 +1570,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
 			struct usb_driver	*driver;
 
 			intf = udev->actconfig->interface[i];
-			if (state <= intf->dev.power.power_state)
+			if (state.event <= intf->dev.power.power_state.event)
 				continue;
 			if (!intf->dev.driver)
 				continue;
@@ -1578,11 +1578,11 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
 
 			if (driver->suspend) {
 				status = driver->suspend(intf, state);
-				if (intf->dev.power.power_state != state
+				if (intf->dev.power.power_state.event != state.event
 						|| status)
 					dev_err(&intf->dev,
 						"suspend %d fail, code %d\n",
-						state, status);
+						state.event, status);
 			}
 
 			/* only drivers with suspend() can ever resume();
@@ -1595,7 +1595,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
 			 * since we know every driver's probe/disconnect works
 			 * even for drivers that can't suspend.
 			 */
-			if (!driver->suspend || state > PM_SUSPEND_MEM) {
+			if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
 #if 1
 				dev_warn(&intf->dev, "resume is unsafe!\n");
 #else
@@ -1616,7 +1616,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
 	 * policies (when HNP doesn't apply) once we have mechanisms to
 	 * turn power back on!  (Likely not before 2.7...)
 	 */
-	if (state > PM_SUSPEND_MEM) {
+	if (state.event > PM_EVENT_FREEZE) {
 		dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
 	}
 
@@ -1733,7 +1733,7 @@ static int finish_port_resume(struct usb_device *udev)
 			struct usb_driver	*driver;
 
 			intf = udev->actconfig->interface[i];
-			if (intf->dev.power.power_state == PMSG_ON)
+			if (intf->dev.power.power_state.event == PM_EVENT_ON)
 				continue;
 			if (!intf->dev.driver) {
 				/* FIXME maybe force to alt 0 */
@@ -1747,11 +1747,11 @@ static int finish_port_resume(struct usb_device *udev)
 
 			/* can we do better than just logging errors? */
 			status = driver->resume(intf);
-			if (intf->dev.power.power_state != PMSG_ON
+			if (intf->dev.power.power_state.event != PM_EVENT_ON
 					|| status)
 				dev_dbg(&intf->dev,
 					"resume fail, state %d code %d\n",
-					intf->dev.power.power_state, status);
+					intf->dev.power.power_state.event, status);
 		}
 		status = 0;
 
@@ -1934,7 +1934,7 @@ static int hub_resume(struct usb_interface *intf)
 	unsigned		port1;
 	int			status;
 
-	if (intf->dev.power.power_state == PM_SUSPEND_ON)
+	if (intf->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 99c85d2f92da..2cddd8a00437 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1400,7 +1400,7 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message)
 	driver = to_usb_driver(dev->driver);
 
 	/* there's only one USB suspend state */
-	if (intf->dev.power.power_state)
+	if (intf->dev.power.power_state.event)
 		return 0;
 
 	if (driver->suspend)
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index b01efb6b36f6..65ac9fef3a7c 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -641,7 +641,7 @@ show_registers (struct class_device *class_dev, char *buf)
 
 	spin_lock_irqsave (&ehci->lock, flags);
 
-	if (bus->controller->power.power_state) {
+	if (bus->controller->power.power_state.event) {
 		size = scnprintf (next, size,
 			"bus %s, device %s (driver " DRIVER_VERSION ")\n"
 			"%s\n"
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index c58408c95c3d..447f488f5d93 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -631,7 +631,7 @@ show_registers (struct class_device *class_dev, char *buf)
 		hcd->product_desc,
 		hcd_name);
 
-	if (bus->controller->power.power_state) {
+	if (bus->controller->power.power_state.event) {
 		size -= scnprintf (next, size,
 			"SUSPENDED (no register access)\n");
 		goto done;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 7a890a65f55d..80eaf659c198 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1781,9 +1781,9 @@ sl811h_suspend(struct device *dev, pm_message_t state, u32 phase)
 	if (phase != SUSPEND_POWER_DOWN)
 		return retval;
 
-	if (state <= PM_SUSPEND_MEM)
+	if (state.event == PM_EVENT_FREEZE)
 		retval = sl811h_hub_suspend(hcd);
-	else
+	else if (state.event == PM_EVENT_SUSPEND)
 		port_power(sl811, 0);
 	if (retval == 0)
 		dev->power.power_state = state;
@@ -1802,7 +1802,7 @@ sl811h_resume(struct device *dev, u32 phase)
 	/* with no "check to see if VBUS is still powered" board hook,
 	 * let's assume it'd only be powered to enable remote wakeup.
 	 */
-	if (dev->power.power_state > PM_SUSPEND_MEM
+	if (dev->power.power_state.event == PM_EVENT_SUSPEND
 			|| !hcd->can_wakeup) {
 		sl811->port1 = 0;
 		port_power(sl811, 1);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index cda7249a90b2..fd7fb98e4b20 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1533,7 +1533,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
 	if (down_interruptible (&dev->sem))
 		return -ERESTARTSYS;
 
-	if (intf->dev.power.power_state != PMSG_ON) {
+	if (intf->dev.power.power_state.event != PM_EVENT_ON) {
 		up (&dev->sem);
 		return -EHOSTUNREACH;
 	}