Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).

  The major update (which causes a conflict with block, see below) is
  Christoph removing the queue limits and their associated block
  helpers.

  The remaining patches are assorted minor fixes and deprecated function
  updates plus a bit of constification"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: mpi3mr: Sanitise num_phys
  scsi: lpfc: Copyright updates for 14.4.0.2 patches
  scsi: lpfc: Update lpfc version to 14.4.0.2
  scsi: lpfc: Add support for 32 byte CDBs
  scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
  scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
  scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
  scsi: lpfc: Update logging of protection type for T10 DIF I/O
  scsi: lpfc: Change default logging level for unsolicited CT MIB commands
  scsi: target: Remove unused list 'device_list'
  scsi: iscsi: Remove unused list 'connlist_err'
  scsi: ufs: exynos: Add support for Tensor gs101 SoC
  scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
  scsi: ufs: exynos: Allow max frequencies up to 267Mhz
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  scsi: ufs: dt-bindings: exynos: Add gs101 compatible
  scsi: qla2xxx: Fix debugfs output for fw_resource_count
  scsi: qedf: Ensure the copied buf is NUL terminated
  scsi: bfa: Ensure the copied buf is NUL terminated
  ...

3 files changed, 50 insertions, 46 deletions

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 12cf9940e5b6..b31464740f6c 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -40,7 +40,6 @@
 #include <scsi/scsi_eh.h>
 
 #include "usb.h"
-#include <linux/usb/hcd.h>
 #include "scsiglue.h"
 #include "debug.h"
 #include "transport.h"
@@ -76,12 +75,6 @@ static int slave_alloc (struct scsi_device *sdev)
 	 */
 	sdev->inquiry_len = 36;
 
-	/*
-	 * Some host controllers may have alignment requirements.
-	 * We'll play it safe by requiring 512-byte alignment always.
-	 */
-	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
-
 	/* Tell the SCSI layer if we know there is more than one LUN */
 	if (us->protocol == USB_PR_BULK && us->max_lun > 0)
 		sdev->sdev_bflags |= BLIST_FORCELUN;
@@ -89,7 +82,7 @@ static int slave_alloc (struct scsi_device *sdev)
 	return 0;
 }
 
-static int slave_configure(struct scsi_device *sdev)
+static int device_configure(struct scsi_device *sdev, struct queue_limits *lim)
 {
 	struct us_data *us = host_to_us(sdev->host);
 	struct device *dev = us->pusb_dev->bus->sysdev;
@@ -104,40 +97,28 @@ static int slave_configure(struct scsi_device *sdev)
 
 		if (us->fflags & US_FL_MAX_SECTORS_MIN)
 			max_sectors = PAGE_SIZE >> 9;
-		if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
-			blk_queue_max_hw_sectors(sdev->request_queue,
-					      max_sectors);
+		lim->max_hw_sectors = min(lim->max_hw_sectors, max_sectors);
 	} else if (sdev->type == TYPE_TAPE) {
 		/*
 		 * Tapes need much higher max_sector limits, so just
 		 * raise it to the maximum possible (4 GB / 512) and
 		 * let the queue segment size sort out the real limit.
 		 */
-		blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
+		lim->max_hw_sectors = 0x7FFFFF;
 	} else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
 		/*
 		 * USB3 devices will be limited to 2048 sectors. This gives us
 		 * better throughput on most devices.
 		 */
-		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
+		lim->max_hw_sectors = 2048;
 	}
 
 	/*
 	 * The max_hw_sectors should be up to maximum size of a mapping for
 	 * the device. Otherwise, a DMA API might fail on swiotlb environment.
 	 */
-	blk_queue_max_hw_sectors(sdev->request_queue,
-		min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
-		      dma_max_mapping_size(dev) >> SECTOR_SHIFT));
-
-	/*
-	 * Some USB host controllers can't do DMA; they have to use PIO.
-	 * For such controllers we need to make sure the block layer sets
-	 * up bounce buffers in addressable memory.
-	 */
-	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
-			(bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
-		blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
+	lim->max_hw_sectors = min_t(size_t,
+		lim->max_hw_sectors, dma_max_mapping_size(dev) >> SECTOR_SHIFT);
 
 	/*
 	 * We can't put these settings in slave_alloc() because that gets
@@ -598,13 +579,22 @@ static ssize_t max_sectors_store(struct device *dev, struct device_attribute *at
 		size_t count)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
+	struct queue_limits lim;
 	unsigned short ms;
+	int ret;
 
-	if (sscanf(buf, "%hu", &ms) > 0) {
-		blk_queue_max_hw_sectors(sdev->request_queue, ms);
-		return count;
-	}
-	return -EINVAL;
+	if (sscanf(buf, "%hu", &ms) <= 0)
+		return -EINVAL;
+
+	blk_mq_freeze_queue(sdev->request_queue);
+	lim = queue_limits_start_update(sdev->request_queue);
+	lim.max_hw_sectors = ms;
+	ret = queue_limits_commit_update(sdev->request_queue, &lim);
+	blk_mq_unfreeze_queue(sdev->request_queue);
+
+	if (ret)
+		return ret;
+	return count;
 }
 static DEVICE_ATTR_RW(max_sectors);
 
@@ -642,12 +632,17 @@ static const struct scsi_host_template usb_stor_host_template = {
 	.this_id =			-1,
 
 	.slave_alloc =			slave_alloc,
-	.slave_configure =		slave_configure,
+	.device_configure =		device_configure,
 	.target_alloc =			target_alloc,
 
 	/* lots of sg segments can be handled */
 	.sg_tablesize =			SG_MAX_SEGMENTS,
 
+	/*
+	 * Some host controllers may have alignment requirements.
+	 * We'll play it safe by requiring 512-byte alignment always.
+	 */
+	.dma_alignment =		511,
 
 	/*
 	 * Limit the total size of a transfer to 120 KB.
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 08953f0d4532..a48870a87a29 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -821,26 +821,19 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 		(struct uas_dev_info *)sdev->host->hostdata;
 
 	sdev->hostdata = devinfo;
-
-	/*
-	 * The protocol has no requirements on alignment in the strict sense.
-	 * Controllers may or may not have alignment restrictions.
-	 * As this is not exported, we use an extremely conservative guess.
-	 */
-	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
-
-	if (devinfo->flags & US_FL_MAX_SECTORS_64)
-		blk_queue_max_hw_sectors(sdev->request_queue, 64);
-	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
-		blk_queue_max_hw_sectors(sdev->request_queue, 240);
-
 	return 0;
 }
 
-static int uas_slave_configure(struct scsi_device *sdev)
+static int uas_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
 
+	if (devinfo->flags & US_FL_MAX_SECTORS_64)
+		lim->max_hw_sectors = 64;
+	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+		lim->max_hw_sectors = 240;
+
 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
 		sdev->no_report_opcodes = 1;
 
@@ -905,11 +898,17 @@ static const struct scsi_host_template uas_host_template = {
 	.queuecommand = uas_queuecommand,
 	.target_alloc = uas_target_alloc,
 	.slave_alloc = uas_slave_alloc,
-	.slave_configure = uas_slave_configure,
+	.device_configure = uas_device_configure,
 	.eh_abort_handler = uas_eh_abort_handler,
 	.eh_device_reset_handler = uas_eh_device_reset_handler,
 	.this_id = -1,
 	.skip_settle_delay = 1,
+	/*
+	 * The protocol has no requirements on alignment in the strict sense.
+	 * Controllers may or may not have alignment restrictions.
+	 * As this is not exported, we use an extremely conservative guess.
+	 */
+	.dma_alignment = 511,
 	.dma_boundary = PAGE_SIZE - 1,
 	.cmd_size = sizeof(struct uas_cmd_info),
 };
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index d1ad6a2509ab..a49a31639f6f 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -47,6 +47,7 @@
 #include <scsi/scsi_device.h>
 
 #include "usb.h"
+#include <linux/usb/hcd.h>
 #include "scsiglue.h"
 #include "transport.h"
 #include "protocol.h"
@@ -961,6 +962,15 @@ int usb_stor_probe1(struct us_data **pus,
 	if (result)
 		goto BadDevice;
 
+	/*
+	 * Some USB host controllers can't do DMA; they have to use PIO.
+	 * For such controllers we need to make sure the block layer sets
+	 * up bounce buffers in addressable memory.
+	 */
+	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
+	    bus_to_hcd(us->pusb_dev->bus)->localmem_pool)
+		host->no_highmem = true;
+
 	/* Get the unusual_devs entries and the descriptors */
 	result = get_device_info(us, id, unusual_dev);
 	if (result)