diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-06-18 19:06:49 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-06-18 19:06:49 +0300 |
commit | e80dac114c63dd54398c3c785a6431622c320e87 (patch) | |
tree | 2a49ad6be601be3463172082bd61bdde863753e9 /drivers/usb/phy/phy-twl6030-usb.c | |
parent | a50094a4813443a7ca605f86019061905ba697c4 (diff) | |
parent | 083d5ad1a924e79ecf92be37cce9f1efa5c1d240 (diff) | |
download | linux-e80dac114c63dd54398c3c785a6431622c320e87.tar.xz |
Merge tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch (65) of USB fixes for 4.7-rc4. Sorry about the
quantity, I've been slow in getting these out.
The majority are the "normal" gadget, musb, and xhci fixes, that we
all are used to. There are also a few other tiny fixes resolving a
number of reported issues that showed up in 4.7-rc1.
All of these have been in linux-next"
* tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
usbip: rate limit get_frame_number message
usb: musb: sunxi: Remove bogus "Frees glue" comment
usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb
usb: echi-hcd: Add ehci_setup check before echi_shutdown
usb: host: ehci-msm: Conditionally call ehci suspend/resume
MAINTAINERS: Add file patterns for usb device tree bindings
usb: host: ehci-tegra: Avoid getting the same reset twice
usb: host: ehci-tegra: Grab the correct UTMI pads reset
USB: mos7720: delete parport
USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
phy: ti-pipe3: Program the DPLL even if it was already locked
usb: musb: Stop bulk endpoint while queue is rotated
usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
usb: musb: host: correct cppi dma channel for isoch transfer
usb: musb: only restore devctl when session was set in backup
usb: phy: Check initial state for twl6030
usb: musb: Use normal module_init for 2430 glue
usb: musb: Remove pm_runtime_set_irq_safe
usb: musb: Remove extra PM runtime calls from 2430 glue layer
usb: musb: Return error value from musb_mailbox
...
Diffstat (limited to 'drivers/usb/phy/phy-twl6030-usb.c')
-rw-r--r-- | drivers/usb/phy/phy-twl6030-usb.c | 29 |
1 files changed, 24 insertions, 5 deletions
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 24e2b3cf1867..a72e8d670adc 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -97,6 +97,9 @@ struct twl6030_usb { struct regulator *usb3v3; + /* used to check initial cable status after probe */ + struct delayed_work get_status_work; + /* used to set vbus, in atomic path */ struct work_struct set_vbus_work; @@ -227,12 +230,16 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) twl->asleep = 1; status = MUSB_VBUS_VALID; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { if (twl->linkstat != MUSB_UNKNOWN) { status = MUSB_VBUS_OFF; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; if (twl->asleep) { regulator_disable(twl->usb3v3); twl->asleep = 0; @@ -264,7 +271,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = MUSB_ID_GROUND; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); @@ -274,6 +283,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) return IRQ_HANDLED; } +static void twl6030_status_work(struct work_struct *work) +{ + struct twl6030_usb *twl = container_of(work, struct twl6030_usb, + get_status_work.work); + + twl6030_usb_irq(twl->irq2, twl); + twl6030_usbotg_irq(twl->irq1, twl); +} + static int twl6030_enable_irq(struct twl6030_usb *twl) { twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); @@ -284,8 +302,6 @@ static int twl6030_enable_irq(struct twl6030_usb *twl) REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, REG_INT_MSK_STS_C); - twl6030_usb_irq(twl->irq2, twl); - twl6030_usbotg_irq(twl->irq1, twl); return 0; } @@ -371,6 +387,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "could not create sysfs file\n"); INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); + INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work); status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, @@ -395,6 +412,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) twl->asleep = 0; twl6030_enable_irq(twl); + schedule_delayed_work(&twl->get_status_work, HZ); dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); return 0; @@ -404,6 +422,7 @@ static int twl6030_usb_remove(struct platform_device *pdev) { struct twl6030_usb *twl = platform_get_drvdata(pdev); + cancel_delayed_work(&twl->get_status_work); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, REG_INT_MSK_LINE_C); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, |