Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

1 files changed, 19 insertions, 15 deletions

diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index cc61ee44b911..d391c79a542a 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -81,33 +81,35 @@ static void check_vbus_state(struct tahvo_usb *tu)
 
 	reg = retu_read(rdev, TAHVO_REG_IDSR);
 	if (reg & TAHVO_STAT_VBUS) {
-		switch (tu->phy.state) {
+		switch (tu->phy.otg->state) {
 		case OTG_STATE_B_IDLE:
 			/* Enable the gadget driver */
 			if (tu->phy.otg->gadget)
 				usb_gadget_vbus_connect(tu->phy.otg->gadget);
-			tu->phy.state = OTG_STATE_B_PERIPHERAL;
+			tu->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+			usb_phy_set_event(&tu->phy, USB_EVENT_ENUMERATED);
 			break;
 		case OTG_STATE_A_IDLE:
 			/*
 			 * Session is now valid assuming the USB hub is driving
 			 * Vbus.
 			 */
-			tu->phy.state = OTG_STATE_A_HOST;
+			tu->phy.otg->state = OTG_STATE_A_HOST;
 			break;
 		default:
 			break;
 		}
 		dev_info(&tu->pt_dev->dev, "USB cable connected\n");
 	} else {
-		switch (tu->phy.state) {
+		switch (tu->phy.otg->state) {
 		case OTG_STATE_B_PERIPHERAL:
 			if (tu->phy.otg->gadget)
 				usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
-			tu->phy.state = OTG_STATE_B_IDLE;
+			tu->phy.otg->state = OTG_STATE_B_IDLE;
+			usb_phy_set_event(&tu->phy, USB_EVENT_NONE);
 			break;
 		case OTG_STATE_A_HOST:
-			tu->phy.state = OTG_STATE_A_IDLE;
+			tu->phy.otg->state = OTG_STATE_A_IDLE;
 			break;
 		default:
 			break;
@@ -132,14 +134,14 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
 	/* Power up the transceiver in USB host mode */
 	retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
 		   USBR_MASTER_SW2 | USBR_MASTER_SW1);
-	tu->phy.state = OTG_STATE_A_IDLE;
+	tu->phy.otg->state = OTG_STATE_A_IDLE;
 
 	check_vbus_state(tu);
 }
 
 static void tahvo_usb_stop_host(struct tahvo_usb *tu)
 {
-	tu->phy.state = OTG_STATE_A_IDLE;
+	tu->phy.otg->state = OTG_STATE_A_IDLE;
 }
 
 static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
@@ -151,7 +153,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
 	/* Power up transceiver and set it in USB peripheral mode */
 	retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
 		   USBR_NSUSPEND | USBR_SLAVE_SW);
-	tu->phy.state = OTG_STATE_B_IDLE;
+	tu->phy.otg->state = OTG_STATE_B_IDLE;
 
 	check_vbus_state(tu);
 }
@@ -160,7 +162,7 @@ static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
 {
 	if (tu->phy.otg->gadget)
 		usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
-	tu->phy.state = OTG_STATE_B_IDLE;
+	tu->phy.otg->state = OTG_STATE_B_IDLE;
 }
 
 static void tahvo_usb_power_off(struct tahvo_usb *tu)
@@ -173,7 +175,7 @@ static void tahvo_usb_power_off(struct tahvo_usb *tu)
 
 	/* Power off transceiver */
 	retu_write(rdev, TAHVO_REG_USBR, 0);
-	tu->phy.state = OTG_STATE_UNDEFINED;
+	tu->phy.otg->state = OTG_STATE_UNDEFINED;
 }
 
 static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
@@ -196,7 +198,8 @@ static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
 
 static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-	struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
+	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+					    phy);
 
 	dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
 
@@ -225,7 +228,8 @@ static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 static int tahvo_usb_set_peripheral(struct usb_otg *otg,
 				    struct usb_gadget *gadget)
 {
-	struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
+	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+					    phy);
 
 	dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget);
 
@@ -379,11 +383,11 @@ static int tahvo_usb_probe(struct platform_device *pdev)
 	/* Create OTG interface */
 	tahvo_usb_power_off(tu);
 	tu->phy.dev = &pdev->dev;
-	tu->phy.state = OTG_STATE_UNDEFINED;
+	tu->phy.otg->state = OTG_STATE_UNDEFINED;
 	tu->phy.label = DRIVER_NAME;
 	tu->phy.set_suspend = tahvo_usb_set_suspend;
 
-	tu->phy.otg->phy = &tu->phy;
+	tu->phy.otg->usb_phy = &tu->phy;
 	tu->phy.otg->set_host = tahvo_usb_set_host;
 	tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;