Merge branch 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux into v4l_for_linus

* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits)
  media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
  hexdump: avoid warning in test function
  fs: take i_mutex during prepare_binprm for set[ug]id executables
  smp: Fix error case handling in smp_call_function_*()
  iommu-common: Fix PARISC compile-time warnings
  sparc: Make LDC use common iommu poll management functions
  sparc: Make sparc64 use scalable lib/iommu-common.c functions
  Break up monolithic iommu table/lock into finer graularity pools and lock
  sparc: Revert generic IOMMU allocator.
  tools/power turbostat: correct dumped pkg-cstate-limit value
  tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
  tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
  tools/power turbostat: Initial Skylake support
  tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
  tools/power turbostat: modprobe msr, if needed
  tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
  tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
  Bluetooth: hidp: Fix regression with older userspace and flags validation
  config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
  perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
  ...

That solves several merge conflicts:
	Documentation/DocBook/media/v4l/subdev-formats.xml
	Documentation/devicetree/bindings/vendor-prefixes.txt
	drivers/staging/media/mn88473/mn88473.c
	include/linux/kconfig.h
	include/uapi/linux/media-bus-format.h

The ones at subdev-formats.xml and media-bus-format.h are not trivial.
That's why we opted to merge from DRM.

9 files changed, 242 insertions, 264 deletions

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 14e1628483d9..39db8b603627 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -79,7 +79,8 @@ config USB_MUSB_TUSB6010
 
 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"
-	depends on ARCH_OMAP2PLUS && USB && OMAP_CONTROL_PHY
+	depends on ARCH_OMAP2PLUS && USB
+	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
 	select GENERIC_PHY
 
 config USB_MUSB_AM35X
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6f4cbfeed97..3789b08ef67b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -99,6 +99,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb.h>
 
 #include "musb_core.h"
 
@@ -507,7 +508,8 @@ void musb_hnp_stop(struct musb *musb)
 	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
-static void musb_generic_disable(struct musb *musb);
+static void musb_recover_from_babble(struct musb *musb);
+
 /*
  * Interrupt Service Routine to record USB "global" interrupts.
  * Since these do not happen often and signify things of
@@ -534,35 +536,21 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	 */
 	if (int_usb & MUSB_INTR_RESUME) {
 		handled = IRQ_HANDLED;
-		dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state));
+		dev_dbg(musb->controller, "RESUME (%s)\n",
+				usb_otg_state_string(musb->xceiv->otg->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
-			void __iomem *mbase = musb->mregs;
-			u8 power;
-
 			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* remote wakeup?  later, GetPortStatus
 				 * will stop RESUME signaling
 				 */
 
-				power = musb_readb(musb->mregs, MUSB_POWER);
-				if (power & MUSB_POWER_SUSPENDM) {
-					/* spurious */
-					musb->int_usb &= ~MUSB_INTR_SUSPEND;
-					dev_dbg(musb->controller, "Spurious SUSPENDM\n");
-					break;
-				}
-
-				power &= ~MUSB_POWER_SUSPENDM;
-				musb_writeb(mbase, MUSB_POWER,
-						power | MUSB_POWER_RESUME);
-
 				musb->port1_status |=
 						(USB_PORT_STAT_C_SUSPEND << 16)
 						| MUSB_PORT_STAT_RESUME;
 				musb->rh_timer = jiffies
-						 + msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 				musb->need_finish_resume = 1;
 
 				musb->xceiv->otg->state = OTG_STATE_A_HOST;
@@ -775,10 +763,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		musb->ep0_stage = MUSB_EP0_START;
 
-		/* flush endpoints when transitioning from Device Mode */
-		if (is_peripheral_active(musb)) {
-			/* REVISIT HNP; just force disconnect */
-		}
 		musb->intrtxe = musb->epmask;
 		musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
 		musb->intrrxe = musb->epmask & 0xfffe;
@@ -879,20 +863,19 @@ b_host:
 	 */
 	if (int_usb & MUSB_INTR_RESET) {
 		handled = IRQ_HANDLED;
-		if ((devctl & MUSB_DEVCTL_HM) != 0) {
+		if (devctl & MUSB_DEVCTL_HM) {
 			/*
-			 * Looks like non-HS BABBLE can be ignored, but
-			 * HS BABBLE is an error condition. For HS the solution
-			 * is to avoid babble in the first place and fix what
-			 * caused BABBLE. When HS BABBLE happens we can only
-			 * stop the session.
+			 * When BABBLE happens what we can depends on which
+			 * platform MUSB is running, because some platforms
+			 * implemented proprietary means for 'recovering' from
+			 * Babble conditions. One such platform is AM335x. In
+			 * most cases, however, the only thing we can do is
+			 * drop the session.
 			 */
-			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
-				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
-			else {
-				ERR("Stopping host session -- babble\n");
-				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-			}
+			dev_err(musb->controller, "Babble\n");
+
+			if (is_host_active(musb))
+				musb_recover_from_babble(musb);
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
 				usb_otg_state_string(musb->xceiv->otg->state));
@@ -931,13 +914,6 @@ b_host:
 		}
 	}
 
-	/* handle babble condition */
-	if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) {
-		musb_generic_disable(musb);
-		schedule_delayed_work(&musb->recover_work,
-				      msecs_to_jiffies(100));
-	}
-
 #if 0
 /* REVISIT ... this would be for multiplexing periodic endpoints, or
  * supporting transfer phasing to prevent exceeding ISO bandwidth
@@ -990,7 +966,7 @@ b_host:
 
 /*-------------------------------------------------------------------------*/
 
-static void musb_generic_disable(struct musb *musb)
+static void musb_disable_interrupts(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;
 	u16	temp;
@@ -1002,16 +978,35 @@ static void musb_generic_disable(struct musb *musb)
 	musb->intrrxe = 0;
 	musb_writew(mbase, MUSB_INTRRXE, 0);
 
-	/* off */
-	musb_writeb(mbase, MUSB_DEVCTL, 0);
-
 	/*  flush pending interrupts */
 	temp = musb_readb(mbase, MUSB_INTRUSB);
 	temp = musb_readw(mbase, MUSB_INTRTX);
 	temp = musb_readw(mbase, MUSB_INTRRX);
+}
+
+static void musb_enable_interrupts(struct musb *musb)
+{
+	void __iomem    *regs = musb->mregs;
+
+	/*  Set INT enable registers, enable interrupts */
+	musb->intrtxe = musb->epmask;
+	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
 
 }
 
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+
+	musb_disable_interrupts(musb);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+}
+
 /*
  * Program the HDRC to start (enable interrupts, dma, etc.).
  */
@@ -1022,13 +1017,7 @@ void musb_start(struct musb *musb)
 
 	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
-	/*  Set INT enable registers, enable interrupts */
-	musb->intrtxe = musb->epmask;
-	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
-	musb->intrrxe = musb->epmask & 0xfffe;
-	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
-	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
+	musb_enable_interrupts(musb);
 	musb_writeb(regs, MUSB_TESTMODE, 0);
 
 	/* put into basic highspeed mode and start session */
@@ -1587,9 +1576,12 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
 irqreturn_t musb_interrupt(struct musb *musb)
 {
 	irqreturn_t	retval = IRQ_NONE;
+	unsigned long	status;
+	unsigned long	epnum;
 	u8		devctl;
-	int		ep_num;
-	u32		reg;
+
+	if (!musb->int_usb && !musb->int_tx && !musb->int_rx)
+		return IRQ_NONE;
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -1597,56 +1589,57 @@ irqreturn_t musb_interrupt(struct musb *musb)
 		is_host_active(musb) ? "host" : "peripheral",
 		musb->int_usb, musb->int_tx, musb->int_rx);
 
-	/* the core can interrupt us for multiple reasons; docs have
-	 * a generic interrupt flowchart to follow
+	/**
+	 * According to Mentor Graphics' documentation, flowchart on page 98,
+	 * IRQ should be handled as follows:
+	 *
+	 * . Resume IRQ
+	 * . Session Request IRQ
+	 * . VBUS Error IRQ
+	 * . Suspend IRQ
+	 * . Connect IRQ
+	 * . Disconnect IRQ
+	 * . Reset/Babble IRQ
+	 * . SOF IRQ (we're not using this one)
+	 * . Endpoint 0 IRQ
+	 * . TX Endpoints
+	 * . RX Endpoints
+	 *
+	 * We will be following that flowchart in order to avoid any problems
+	 * that might arise with internal Finite State Machine.
 	 */
-	if (musb->int_usb)
-		retval |= musb_stage0_irq(musb, musb->int_usb,
-				devctl);
 
-	/* "stage 1" is handling endpoint irqs */
+	if (musb->int_usb)
+		retval |= musb_stage0_irq(musb, musb->int_usb, devctl);
 
-	/* handle endpoint 0 first */
 	if (musb->int_tx & 1) {
 		if (is_host_active(musb))
 			retval |= musb_h_ep0_irq(musb);
 		else
 			retval |= musb_g_ep0_irq(musb);
+
+		/* we have just handled endpoint 0 IRQ, clear it */
+		musb->int_tx &= ~BIT(0);
 	}
 
-	/* RX on endpoints 1-15 */
-	reg = musb->int_rx >> 1;
-	ep_num = 1;
-	while (reg) {
-		if (reg & 1) {
-			/* musb_ep_select(musb->mregs, ep_num); */
-			/* REVISIT just retval = ep->rx_irq(...) */
-			retval = IRQ_HANDLED;
-			if (is_host_active(musb))
-				musb_host_rx(musb, ep_num);
-			else
-				musb_g_rx(musb, ep_num);
-		}
+	status = musb->int_tx;
 
-		reg >>= 1;
-		ep_num++;
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_tx(musb, epnum);
+		else
+			musb_g_tx(musb, epnum);
 	}
 
-	/* TX on endpoints 1-15 */
-	reg = musb->int_tx >> 1;
-	ep_num = 1;
-	while (reg) {
-		if (reg & 1) {
-			/* musb_ep_select(musb->mregs, ep_num); */
-			/* REVISIT just retval |= ep->tx_irq(...) */
-			retval = IRQ_HANDLED;
-			if (is_host_active(musb))
-				musb_host_tx(musb, ep_num);
-			else
-				musb_g_tx(musb, ep_num);
-		}
-		reg >>= 1;
-		ep_num++;
+	status = musb->int_rx;
+
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_rx(musb, epnum);
+		else
+			musb_g_rx(musb, epnum);
 	}
 
 	return retval;
@@ -1825,33 +1818,44 @@ static void musb_irq_work(struct work_struct *data)
 	}
 }
 
-/* Recover from babble interrupt conditions */
-static void musb_recover_work(struct work_struct *data)
+static void musb_recover_from_babble(struct musb *musb)
 {
-	struct musb *musb = container_of(data, struct musb, recover_work.work);
-	int status, ret;
+	int ret;
+	u8 devctl;
+
+	musb_disable_interrupts(musb);
+
+	/*
+	 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
+	 * it some slack and wait for 10us.
+	 */
+	udelay(10);
 
-	ret  = musb_platform_reset(musb);
-	if (ret)
+	ret  = musb_platform_recover(musb);
+	if (ret) {
+		musb_enable_interrupts(musb);
 		return;
+	}
 
-	usb_phy_vbus_off(musb->xceiv);
-	usleep_range(100, 200);
+	/* drop session bit */
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	usb_phy_vbus_on(musb->xceiv);
-	usleep_range(100, 200);
+	/* tell usbcore about it */
+	musb_root_disconnect(musb);
 
 	/*
 	 * When a babble condition occurs, the musb controller
 	 * removes the session bit and the endpoint config is lost.
 	 */
 	if (musb->dyn_fifo)
-		status = ep_config_from_table(musb);
+		ret = ep_config_from_table(musb);
 	else
-		status = ep_config_from_hw(musb);
+		ret = ep_config_from_hw(musb);
 
-	/* start the session again */
-	if (status == 0)
+	/* restart session */
+	if (ret == 0)
 		musb_start(musb);
 }
 
@@ -1969,10 +1973,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		goto fail0;
 	}
 
-	pm_runtime_use_autosuspend(musb->controller);
-	pm_runtime_set_autosuspend_delay(musb->controller, 200);
-	pm_runtime_enable(musb->controller);
-
 	spin_lock_init(&musb->lock);
 	musb->board_set_power = plat->set_power;
 	musb->min_power = plat->min_power;
@@ -1991,6 +1991,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_readl = musb_default_readl;
 	musb_writel = musb_default_writel;
 
+	/* We need musb_read/write functions initialized for PM */
+	pm_runtime_use_autosuspend(musb->controller);
+	pm_runtime_set_autosuspend_delay(musb->controller, 200);
+	pm_runtime_irq_safe(musb->controller);
+	pm_runtime_enable(musb->controller);
+
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs
 	 *   - sets the musb->isr
@@ -2085,7 +2091,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	/* Init IRQ workqueue before request_irq */
 	INIT_WORK(&musb->irq_work, musb_irq_work);
-	INIT_DELAYED_WORK(&musb->recover_work, musb_recover_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
 	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
@@ -2181,7 +2186,6 @@ fail4:
 
 fail3:
 	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->recover_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
@@ -2247,7 +2251,6 @@ static int musb_remove(struct platform_device *pdev)
 		dma_controller_destroy(musb->dma_controller);
 
 	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->recover_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	musb_free(musb);
@@ -2461,7 +2464,7 @@ static int musb_resume(struct device *dev)
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
 		schedule_delayed_work(&musb->finish_resume_work,
-				      msecs_to_jiffies(20));
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
 	/*
@@ -2504,7 +2507,7 @@ static int musb_runtime_resume(struct device *dev)
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
 		schedule_delayed_work(&musb->finish_resume_work,
-				msecs_to_jiffies(20));
+				msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
 	return 0;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 5e65958f7915..3877249a8b2d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -160,7 +160,8 @@ struct musb_io;
  * @init:	turns on clocks, sets up platform-specific registers, etc
  * @exit:	undoes @init
  * @set_mode:	forcefully changes operating mode
- * @try_ilde:	tries to idle the IP
+ * @try_idle:	tries to idle the IP
+ * @recover:	platform-specific babble recovery
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
  * @adjust_channel_params: pre check for standard dma channel_program func
@@ -196,7 +197,7 @@ struct musb_platform_ops {
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	int	(*set_mode)(struct musb *musb, u8 mode);
 	void	(*try_idle)(struct musb *musb, unsigned long timeout);
-	int	(*reset)(struct musb *musb);
+	int	(*recover)(struct musb *musb);
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
@@ -300,7 +301,6 @@ struct musb {
 
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
-	struct delayed_work	recover_work;
 	struct delayed_work	deassert_reset_work;
 	struct delayed_work	finish_resume_work;
 	u16			hwvers;
@@ -558,12 +558,12 @@ static inline void musb_platform_try_idle(struct musb *musb,
 		musb->ops->try_idle(musb, timeout);
 }
 
-static inline int  musb_platform_reset(struct musb *musb)
+static inline int  musb_platform_recover(struct musb *musb)
 {
-	if (!musb->ops->reset)
-		return -EINVAL;
+	if (!musb->ops->recover)
+		return 0;
 
-	return musb->ops->reset(musb);
+	return musb->ops->recover(musb);
 }
 
 static inline int musb_platform_get_vbus_status(struct musb *musb)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index be84562d021b..8bd8c5e26921 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -225,10 +225,12 @@ static void cppi41_dma_callback(void *private_data)
 	struct dma_channel *channel = private_data;
 	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
 	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	struct cppi41_dma_controller *controller;
 	struct musb *musb = hw_ep->musb;
 	unsigned long flags;
 	struct dma_tx_state txstate;
 	u32 transferred;
+	int is_hs = 0;
 	bool empty;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -248,61 +250,59 @@ static void cppi41_dma_callback(void *private_data)
 			transferred < cppi41_channel->packet_sz)
 		cppi41_channel->prog_len = 0;
 
-	empty = musb_is_tx_fifo_empty(hw_ep);
-	if (empty) {
+	if (cppi41_channel->is_tx)
+		empty = musb_is_tx_fifo_empty(hw_ep);
+
+	if (!cppi41_channel->is_tx || empty) {
 		cppi41_trans_done(cppi41_channel);
-	} else {
-		struct cppi41_dma_controller *controller;
-		int is_hs = 0;
-		/*
-		 * On AM335x it has been observed that the TX interrupt fires
-		 * too early that means the TXFIFO is not yet empty but the DMA
-		 * engine says that it is done with the transfer. We don't
-		 * receive a FIFO empty interrupt so the only thing we can do is
-		 * to poll for the bit. On HS it usually takes 2us, on FS around
-		 * 110us - 150us depending on the transfer size.
-		 * We spin on HS (no longer than than 25us and setup a timer on
-		 * FS to check for the bit and complete the transfer.
-		 */
-		controller = cppi41_channel->controller;
+		goto out;
+	}
 
-		if (is_host_active(musb)) {
-			if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
-				is_hs = 1;
-		} else {
-			if (musb->g.speed == USB_SPEED_HIGH)
-				is_hs = 1;
-		}
-		if (is_hs) {
-			unsigned wait = 25;
-
-			do {
-				empty = musb_is_tx_fifo_empty(hw_ep);
-				if (empty)
-					break;
-				wait--;
-				if (!wait)
-					break;
-				udelay(1);
-			} while (1);
+	/*
+	 * On AM335x it has been observed that the TX interrupt fires
+	 * too early that means the TXFIFO is not yet empty but the DMA
+	 * engine says that it is done with the transfer. We don't
+	 * receive a FIFO empty interrupt so the only thing we can do is
+	 * to poll for the bit. On HS it usually takes 2us, on FS around
+	 * 110us - 150us depending on the transfer size.
+	 * We spin on HS (no longer than than 25us and setup a timer on
+	 * FS to check for the bit and complete the transfer.
+	 */
+	controller = cppi41_channel->controller;
+
+	if (is_host_active(musb)) {
+		if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
+			is_hs = 1;
+	} else {
+		if (musb->g.speed == USB_SPEED_HIGH)
+			is_hs = 1;
+	}
+	if (is_hs) {
+		unsigned wait = 25;
 
+		do {
 			empty = musb_is_tx_fifo_empty(hw_ep);
 			if (empty) {
 				cppi41_trans_done(cppi41_channel);
 				goto out;
 			}
-		}
-		list_add_tail(&cppi41_channel->tx_check,
-				&controller->early_tx_list);
-		if (!hrtimer_is_queued(&controller->early_tx)) {
-			unsigned long usecs = cppi41_channel->total_len / 10;
+			wait--;
+			if (!wait)
+				break;
+			cpu_relax();
+		} while (1);
+	}
+	list_add_tail(&cppi41_channel->tx_check,
+			&controller->early_tx_list);
+	if (!hrtimer_is_queued(&controller->early_tx)) {
+		unsigned long usecs = cppi41_channel->total_len / 10;
 
-			hrtimer_start_range_ns(&controller->early_tx,
+		hrtimer_start_range_ns(&controller->early_tx,
 				ktime_set(0, usecs * NSEC_PER_USEC),
 				20 * NSEC_PER_USEC,
 				HRTIMER_MODE_REL);
-		}
 	}
+
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 53bd0e71d19f..65d931a28a14 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -119,7 +119,7 @@ struct dsps_musb_wrapper {
 	unsigned	iddig:5;
 	unsigned	iddig_mux:5;
 	/* miscellaneous stuff */
-	u8		poll_seconds;
+	unsigned	poll_timeout;
 };
 
 /*
@@ -225,9 +225,8 @@ static void dsps_musb_enable(struct musb *musb)
 
 	dsps_writel(reg_base, wrp->epintr_set, epmask);
 	dsps_writel(reg_base, wrp->coreintr_set, coremask);
-	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
-	dsps_writel(reg_base, wrp->coreintr_set,
-		    (1 << wrp->drvvbus) << wrp->usb_shift);
+	/* start polling for ID change. */
+	mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
 	dsps_musb_try_idle(musb, 0);
 }
 
@@ -285,7 +284,8 @@ static void otg_timer(unsigned long _musb)
 		}
 		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
 			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
@@ -330,28 +330,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 
 	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
 			usbintr, epintr);
-	/*
-	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
-	 * DSPS IP's missing ID change IRQ.  We need an ID change IRQ to
-	 * switch appropriately between halves of the OTG state machine.
-	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
-	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
-	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
-	 */
-	if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) {
-		pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
-
-		/*
-		 * When a babble condition occurs, the musb controller removes
-		 * the session and is no longer in host mode. Hence, all
-		 * devices connected to its root hub get disconnected.
-		 *
-		 * Hand this error down to the musb core isr, so it can
-		 * recover.
-		 */
-		musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT;
-		musb->int_tx = musb->int_rx = 0;
-	}
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
 		int drvvbus = dsps_readl(reg_base, wrp->status);
@@ -374,8 +352,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&glue->timer,
-					jiffies + wrp->poll_seconds * HZ);
+			mod_timer(&glue->timer, jiffies +
+					msecs_to_jiffies(wrp->poll_timeout));
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
@@ -404,7 +382,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	/* Poll for ID change in OTG port mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -453,16 +432,31 @@ static int dsps_musb_init(struct musb *musb)
 	musb->ctrl_base = reg_base;
 
 	/* NOP driver needs change if supporting dual instance */
-	musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
 	if (IS_ERR(musb->xceiv))
 		return PTR_ERR(musb->xceiv);
 
+	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
 	/* Returns zero if e.g. not clocked */
 	rev = dsps_readl(reg_base, wrp->revision);
 	if (!rev)
 		return -ENODEV;
 
 	usb_phy_init(musb->xceiv);
+	if (IS_ERR(musb->phy))  {
+		musb->phy = NULL;
+	} else {
+		ret = phy_init(musb->phy);
+		if (ret < 0)
+			return ret;
+		ret = phy_power_on(musb->phy);
+		if (ret) {
+			phy_exit(musb->phy);
+			return ret;
+		}
+	}
+
 	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
 	/* Reset the musb */
@@ -482,7 +476,7 @@ static int dsps_musb_init(struct musb *musb)
 	 * logic enabled.
 	 */
 	val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
-	if (val == MUSB_BABBLE_RCV_DISABLE) {
+	if (val & MUSB_BABBLE_RCV_DISABLE) {
 		glue->sw_babble_enabled = true;
 		val |= MUSB_BABBLE_SW_SESSION_CTRL;
 		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
@@ -502,6 +496,8 @@ static int dsps_musb_exit(struct musb *musb)
 
 	del_timer_sync(&glue->timer);
 	usb_phy_shutdown(musb->xceiv);
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
 	debugfs_remove_recursive(glue->dbgfs_root);
 
 	return 0;
@@ -554,7 +550,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 	return 0;
 }
 
-static bool  sw_babble_control(struct musb *musb)
+static bool dsps_sw_babble_control(struct musb *musb)
 {
 	u8 babble_ctl;
 	bool session_restart =  false;
@@ -605,31 +601,36 @@ static bool  sw_babble_control(struct musb *musb)
 	return session_restart;
 }
 
-static int dsps_musb_reset(struct musb *musb)
+static int dsps_musb_recover(struct musb *musb)
 {
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	int session_restart = 0;
 
 	if (glue->sw_babble_enabled)
-		session_restart = sw_babble_control(musb);
-	/*
-	 * In case of new silicon version babble condition can be recovered
-	 * without resetting the MUSB. But for older silicon versions, MUSB
-	 * reset is needed
-	 */
-	if (session_restart || !glue->sw_babble_enabled) {
-		dev_info(musb->controller, "Restarting MUSB to recover from Babble\n");
-		dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
-		usleep_range(100, 200);
-		usb_phy_shutdown(musb->xceiv);
-		usleep_range(100, 200);
-		usb_phy_init(musb->xceiv);
+		session_restart = dsps_sw_babble_control(musb);
+	else
 		session_restart = 1;
+
+	return session_restart ? 0 : -EPIPE;
+}
+
+/* Similar to am35x, dm81xx support only 32-bit read operation */
+static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (len >= 4) {
+		ioread32_rep(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
 	}
 
-	return !session_restart;
+	/* Read any remaining 1 to 3 bytes */
+	if (len > 0) {
+		u32 val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
 }
 
 static struct musb_platform_ops dsps_ops = {
@@ -642,7 +643,7 @@ static struct musb_platform_ops dsps_ops = {
 
 	.try_idle	= dsps_musb_try_idle,
 	.set_mode	= dsps_musb_set_mode,
-	.reset		= dsps_musb_reset,
+	.recover	= dsps_musb_recover,
 };
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
@@ -687,7 +688,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	struct musb_hdrc_config	*config;
 	struct platform_device *musb;
 	struct device_node *dn = parent->dev.of_node;
-	int ret;
+	int ret, val;
 
 	memset(resources, 0, sizeof(resources));
 	res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
@@ -714,7 +715,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	musb->dev.parent		= dev;
 	musb->dev.dma_mask		= &musb_dmamask;
 	musb->dev.coherent_dma_mask	= musb_dmamask;
-	musb->dev.of_node		= of_node_get(dn);
 
 	glue->musb = musb;
 
@@ -739,7 +739,10 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	pdata.mode = get_musb_port_mode(dev);
 	/* DT keeps this entry in mA, musb expects it as per USB spec */
 	pdata.power = get_int_prop(dn, "mentor,power") / 2;
-	config->multipoint = of_property_read_bool(dn, "mentor,multipoint");
+
+	ret = of_property_read_u32(dn, "mentor,multipoint", &val);
+	if (!ret && val)
+		config->multipoint = true;
 
 	ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
 	if (ret) {
@@ -776,6 +779,9 @@ static int dsps_probe(struct platform_device *pdev)
 	}
 	wrp = match->data;
 
+	if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
+		dsps_ops.read_fifo = dsps_read_fifo32;
+
 	/* allocate glue */
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue)
@@ -847,12 +853,14 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
 	.rxep_shift		= 16,
 	.rxep_mask		= 0xfffe,
 	.rxep_bitmap		= (0xfffe << 16),
-	.poll_seconds		= 2,
+	.poll_timeout		= 2000, /* ms */
 };
 
 static const struct of_device_id musb_dsps_of_match[] = {
 	{ .compatible = "ti,musb-am33xx",
-		.data = (void *) &am33xx_driver_data, },
+		.data = &am33xx_driver_data, },
+	{ .compatible = "ti,musb-dm816",
+		.data = &am33xx_driver_data, },
 	{  },
 };
 MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
@@ -903,7 +911,8 @@ static int dsps_resume(struct device *dev)
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b2d9040c7685..4c481cd66c77 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1876,44 +1876,6 @@ err:
 	return retval;
 }
 
-static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
-{
-	int			i;
-	struct musb_hw_ep	*hw_ep;
-
-	/* don't disconnect if it's not connected */
-	if (musb->g.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
-	else
-		musb->g.speed = USB_SPEED_UNKNOWN;
-
-	/* deactivate the hardware */
-	if (musb->softconnect) {
-		musb->softconnect = 0;
-		musb_pullup(musb, 0);
-	}
-	musb_stop(musb);
-
-	/* killing any outstanding requests will quiesce the driver;
-	 * then report disconnect
-	 */
-	if (driver) {
-		for (i = 0, hw_ep = musb->endpoints;
-				i < musb->nr_endpoints;
-				i++, hw_ep++) {
-			musb_ep_select(musb->mregs, i);
-			if (hw_ep->is_shared_fifo /* || !epnum */) {
-				nuke(&hw_ep->ep_in, -ESHUTDOWN);
-			} else {
-				if (hw_ep->max_packet_sz_tx)
-					nuke(&hw_ep->ep_in, -ESHUTDOWN);
-				if (hw_ep->max_packet_sz_rx)
-					nuke(&hw_ep->ep_out, -ESHUTDOWN);
-			}
-		}
-	}
-}
-
 /*
  * Unregister the gadget driver. Used by gadget drivers when
  * unregistering themselves from the controller.
@@ -1940,7 +1902,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
 	(void) musb_gadget_vbus_draw(&musb->g, 0);
 
 	musb->xceiv->otg->state = OTG_STATE_UNDEFINED;
-	stop_activity(musb, NULL);
+	musb_stop(musb);
 	otg_set_peripheral(musb->xceiv->otg, NULL);
 
 	musb->is_active = 0;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 883a9adfdfff..c3d5fc9dfb5b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2613,7 +2613,7 @@ static const struct hc_driver musb_hc_driver = {
 	.description		= "musb-hcd",
 	.product_desc		= "MUSB HDRC host driver",
 	.hcd_priv_size		= sizeof(struct musb *),
-	.flags			= HCD_USB2 | HCD_MEMORY,
+	.flags			= HCD_USB2 | HCD_MEMORY | HCD_BH,
 
 	/* not using irq handler or reset hooks from usbcore, since
 	 * those must be shared with peripheral code for OTG configs
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 294e159f4afe..86c4b533e90b 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -136,7 +136,7 @@ void musb_port_suspend(struct musb *musb, bool do_suspend)
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
 		schedule_delayed_work(&musb->finish_resume_work,
-				      msecs_to_jiffies(20));
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 }
 
@@ -345,7 +345,7 @@ int musb_hub_control(
 		struct usb_hub_descriptor *desc = (void *)buf;
 
 		desc->bDescLength = 9;
-		desc->bDescriptorType = 0x29;
+		desc->bDescriptorType = USB_DT_HUB;
 		desc->bNbrPorts = 1;
 		desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 763649eb4987..cc752d8c7773 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -516,7 +516,7 @@ static int omap2430_probe(struct platform_device *pdev)
 	struct omap2430_glue		*glue;
 	struct device_node		*np = pdev->dev.of_node;
 	struct musb_hdrc_config		*config;
-	int				ret = -ENOMEM;
+	int				ret = -ENOMEM, val;
 
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue)
@@ -559,7 +559,10 @@ static int omap2430_probe(struct platform_device *pdev)
 		of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
 		of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
 		of_property_read_u32(np, "power", (u32 *)&pdata->power);
-		config->multipoint = of_property_read_bool(np, "multipoint");
+
+		ret = of_property_read_u32(np, "multipoint", &val);
+		if (!ret && val)
+			config->multipoint = true;
 
 		pdata->board_data	= data;
 		pdata->config		= config;