diff options
| author | Chunfeng Yun <chunfeng.yun@mediatek.com> | 2018-08-29 05:36:50 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-09-10 21:09:09 +0300 |
| commit | 0eae49582b4dee1a0e96007e1dea5122db98371a (patch) | |
| tree | 645922ba6660c5d15180d39b5cd955c719becfee /drivers/usb/mtu3/mtu3_gadget.c | |
| parent | 1973d029d6e91c2e364492a01e53cc8e7cc66b34 (diff) | |
| download | linux-0eae49582b4dee1a0e96007e1dea5122db98371a.tar.xz | |
usb: mtu3: disable vbus rise/fall interrupts of ltssm
The vbus rise & fall interrupts are used to enable and disable
U3 function of device automatically, this cause some issues when
class driver is initialized as deactivated, and will skip over
software-controlled connect by pullup(), but UDC wants to keep
disconnect until usb_gadget_activate() is called which calls
pullup() if needed. So we disable vbus rise & fall interrupts
and just use pullup() to enable & disable U3 function, and reset
mtu3 state when disconnect instead when vbus fall.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/mtu3/mtu3_gadget.c')
| -rw-r--r-- | drivers/usb/mtu3/mtu3_gadget.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index 5c60a8c5a0b5..bbcd3332471d 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -585,6 +585,17 @@ static const struct usb_gadget_ops mtu3_gadget_ops = { .udc_stop = mtu3_gadget_stop, }; +static void mtu3_state_reset(struct mtu3 *mtu) +{ + mtu->address = 0; + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + mtu->may_wakeup = 0; + mtu->u1_enable = 0; + mtu->u2_enable = 0; + mtu->delayed_status = false; + mtu->test_mode = false; +} + static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep, u32 epnum, u32 is_in) { @@ -702,6 +713,7 @@ void mtu3_gadget_disconnect(struct mtu3 *mtu) spin_lock(&mtu->lock); } + mtu3_state_reset(mtu); usb_gadget_set_state(&mtu->g, USB_STATE_NOTATTACHED); } @@ -712,12 +724,6 @@ void mtu3_gadget_reset(struct mtu3 *mtu) /* report disconnect, if we didn't flush EP state */ if (mtu->g.speed != USB_SPEED_UNKNOWN) mtu3_gadget_disconnect(mtu); - - mtu->address = 0; - mtu->ep0_state = MU3D_EP0_STATE_SETUP; - mtu->may_wakeup = 0; - mtu->u1_enable = 0; - mtu->u2_enable = 0; - mtu->delayed_status = false; - mtu->test_mode = false; + else + mtu3_state_reset(mtu); } |