xhci: remove unused parameter 'xhci' in function xhci_handshake().

Parameter 'xhci' is no longer be used in function xhci_handshake(),
just remove it.

Signed-off-by: Lin Wang <lin.x.wang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 9 insertions, 10 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 93200dbc028c..5ec74e213dab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -60,8 +60,7 @@ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
  * handshake done).  There are two failure modes:  "usec" have passed (major
  * hardware flakeout), or the register reads as all-ones (hardware removed).
  */
-int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
-		      u32 mask, u32 done, int usec)
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
 {
 	u32	result;
 
@@ -111,7 +110,7 @@ int xhci_halt(struct xhci_hcd *xhci)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC");
 	xhci_quiesce(xhci);
 
-	ret = xhci_handshake(xhci, &xhci->op_regs->status,
+	ret = xhci_handshake(&xhci->op_regs->status,
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
 	if (!ret) {
 		xhci->xhc_state |= XHCI_STATE_HALTED;
@@ -140,7 +139,7 @@ static int xhci_start(struct xhci_hcd *xhci)
 	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
 	 * running.
 	 */
-	ret = xhci_handshake(xhci, &xhci->op_regs->status,
+	ret = xhci_handshake(&xhci->op_regs->status,
 			STS_HALT, 0, XHCI_MAX_HALT_USEC);
 	if (ret == -ETIMEDOUT)
 		xhci_err(xhci, "Host took too long to start, "
@@ -175,7 +174,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	command |= CMD_RESET;
 	writel(command, &xhci->op_regs->command);
 
-	ret = xhci_handshake(xhci, &xhci->op_regs->command,
+	ret = xhci_handshake(&xhci->op_regs->command,
 			CMD_RESET, 0, 10 * 1000 * 1000);
 	if (ret)
 		return ret;
@@ -186,7 +185,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	ret = xhci_handshake(xhci, &xhci->op_regs->status,
+	ret = xhci_handshake(&xhci->op_regs->status,
 			STS_CNR, 0, 10 * 1000 * 1000);
 
 	for (i = 0; i < 2; ++i) {
@@ -929,7 +928,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	/* Some chips from Fresco Logic need an extraordinary delay */
 	delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1;
 
-	if (xhci_handshake(xhci, &xhci->op_regs->status,
+	if (xhci_handshake(&xhci->op_regs->status,
 		      STS_HALT, STS_HALT, delay)) {
 		xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
 		spin_unlock_irq(&xhci->lock);
@@ -944,7 +943,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	command = readl(&xhci->op_regs->command);
 	command |= CMD_CSS;
 	writel(command, &xhci->op_regs->command);
-	if (xhci_handshake(xhci, &xhci->op_regs->status,
+	if (xhci_handshake(&xhci->op_regs->status,
 				STS_SAVE, 0, 10 * 1000)) {
 		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
@@ -1011,7 +1010,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		command = readl(&xhci->op_regs->command);
 		command |= CMD_CRS;
 		writel(command, &xhci->op_regs->command);
-		if (xhci_handshake(xhci, &xhci->op_regs->status,
+		if (xhci_handshake(&xhci->op_regs->status,
 			      STS_RESTORE, 0, 10 * 1000)) {
 			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
@@ -1082,7 +1081,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	command = readl(&xhci->op_regs->command);
 	command |= CMD_RUN;
 	writel(command, &xhci->op_regs->command);
-	xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
+	xhci_handshake(&xhci->op_regs->status, STS_HALT,
 		  0, 250 * 1000);
 
 	/* step 5: walk topology and initialize portsc,