diff options
| author | Mayank Rana <quic_mrana@quicinc.com> | 2022-05-04 22:36:41 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-05-19 19:14:16 +0300 |
| commit | 9d778f0c5f95ca5aa2ff628ea281978697e8d89b (patch) | |
| tree | 05a56d3fe9278b775de4b544ab74446881c8d4cc /drivers/usb/dwc3/gadget.c | |
| parent | 69a1c9a9b273271f2a2674bcc117336a9bb0a4b4 (diff) | |
| download | linux-9d778f0c5f95ca5aa2ff628ea281978697e8d89b.tar.xz | |
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
According to the databook ep0 should be in setup phase during reset.
If host issues reset between control transfers, ep0 will be in an
invalid state. Fix this by issuing stall and restart on ep0 if it
is not in setup phase.
Also SW needs to complete pending control transfer and setup core for
next setup stage as per data book. Hence check ep0 state during reset
interrupt handling and make sure active transfers on ep0 out/in
endpoint are stopped by queuing ENDXFER command for that endpoint and
restart ep0 out again to receive next setup packet.
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
Link: https://lore.kernel.org/r/1651693001-29891-1-git-send-email-quic_mrana@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 27 |
1 files changed, 25 insertions, 2 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4f54f0ef21df..8c366fa82105 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -882,12 +882,13 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) reg |= DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + dep->trb_dequeue = 0; + dep->trb_enqueue = 0; + if (usb_endpoint_xfer_control(desc)) goto out; /* Initialize the TRB ring */ - dep->trb_dequeue = 0; - dep->trb_enqueue = 0; memset(dep->trb_pool, 0, sizeof(struct dwc3_trb) * DWC3_TRB_NUM); @@ -2741,6 +2742,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; + dwc->ep0_bounced = false; dwc->link_state = DWC3_LINK_STATE_SS_DIS; dwc->delayed_status = false; dwc3_ep0_out_start(dwc); @@ -3820,6 +3822,27 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) } dwc3_reset_gadget(dwc); + + /* + * From SNPS databook section 8.1.2, the EP0 should be in setup + * phase. So ensure that EP0 is in setup phase by issuing a stall + * and restart if EP0 is not in setup phase. + */ + if (dwc->ep0state != EP0_SETUP_PHASE) { + unsigned int dir; + + dir = !!dwc->ep0_expect_in; + if (dwc->ep0state == EP0_DATA_PHASE) + dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); + else + dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); + + dwc->eps[0]->trb_enqueue = 0; + dwc->eps[1]->trb_enqueue = 0; + + dwc3_ep0_stall_and_restart(dwc); + } + /* * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a * Section 4.1.2 Table 4-2, it states that during a USB reset, the SW |