summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorBarry Song <Baohua.Song@csr.com>2013-01-16 10:49:27 +0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-01-18 05:18:55 +0400
commitac4ce718893c546f7a2d34ab55a8f75842399f86 (patch)
treed858a4fa3c2b9dca0e383324b00cfad96aebc893 /drivers/tty
parente27a7d7977b07d701ba247e2ddb95466d95c898f (diff)
downloadlinux-ac4ce718893c546f7a2d34ab55a8f75842399f86.tar.xz
serial: sirf: only use lookup table to set baudrate when ioclk=150MHz
The fast lookup table to set baudrate is only right when ioclk is 150MHz. for most platforms, ioclk is 150MHz, but some boards might set ioclk to other frequency. so re-calc the clk_div_reg when ioclk is not 150MHz. this patch also gets clk in probe and puts it in remove. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c28
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h1
2 files changed, 22 insertions, 7 deletions
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 8f3d6c091acc..6bbfe9934a4d 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -357,7 +357,6 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
struct ktermios *old)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- unsigned long ioclk_rate;
unsigned long config_reg = 0;
unsigned long baud_rate;
unsigned long setted_baud;
@@ -369,7 +368,6 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
int threshold_div;
int temp;
- ioclk_rate = 150000000;
switch (termios->c_cflag & CSIZE) {
default:
case CS8:
@@ -425,14 +423,17 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
sirfsoc_uart_disable_ms(port);
}
- /* common rate: fast calculation */
- for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
- if (baud_rate == baudrate_to_regv[ic].baud_rate)
- clk_div_reg = baudrate_to_regv[ic].reg_val;
+ if (port->uartclk == 150000000) {
+ /* common rate: fast calculation */
+ for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
+ if (baud_rate == baudrate_to_regv[ic].baud_rate)
+ clk_div_reg = baudrate_to_regv[ic].reg_val;
+ }
+
setted_baud = baud_rate;
/* arbitary rate setting */
if (unlikely(clk_div_reg == 0))
- clk_div_reg = sirfsoc_calc_sample_div(baud_rate, ioclk_rate,
+ clk_div_reg = sirfsoc_calc_sample_div(baud_rate, port->uartclk,
&setted_baud);
wr_regl(port, SIRFUART_DIVISOR, clk_div_reg);
@@ -691,6 +692,14 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
goto err;
}
+ sirfport->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(sirfport->clk)) {
+ ret = PTR_ERR(sirfport->clk);
+ goto clk_err;
+ }
+ clk_prepare_enable(sirfport->clk);
+ port->uartclk = clk_get_rate(sirfport->clk);
+
port->ops = &sirfsoc_uart_ops;
spin_lock_init(&port->lock);
@@ -704,6 +713,9 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
return 0;
port_err:
+ clk_disable_unprepare(sirfport->clk);
+ clk_put(sirfport->clk);
+clk_err:
platform_set_drvdata(pdev, NULL);
if (sirfport->hw_flow_ctrl)
pinctrl_put(sirfport->p);
@@ -718,6 +730,8 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (sirfport->hw_flow_ctrl)
pinctrl_put(sirfport->p);
+ clk_disable_unprepare(sirfport->clk);
+ clk_put(sirfport->clk);
uart_remove_one_port(&sirfsoc_uart_drv, port);
return 0;
}
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 6431640c3163..85328ba0c4e3 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -163,6 +163,7 @@ struct sirfsoc_uart_port {
struct uart_port port;
struct pinctrl *p;
+ struct clk *clk;
};
/* Hardware Flow Control */