Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Mostly simple overlapping changes.

For example, David Ahern's adjacency list revamp in 'net-next'
conflicted with an adjacency list traversal bug fix in 'net'.

Signed-off-by: David S. Miller <davem@davemloft.net>

11 files changed, 43 insertions, 17 deletions

diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 886fcf37f291..b9923464599f 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -213,7 +213,7 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	struct pci_dev *pdev = to_pci_dev(port->dev);
 	int ret;
 
-	ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1bfb6fdbaa20..1731b98d2471 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -83,7 +83,8 @@ static const struct serial8250_config uart_config[] = {
 		.name		= "16550A",
 		.fifo_size	= 16,
 		.tx_loadsz	= 16,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index b8d9c8c9d02a..417d9e7038e1 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -99,7 +99,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
 	case UART_LCR:
 		valshift = UNIPHIER_UART_LCR_SHIFT;
 		/* Divisor latch access bit does not exist. */
-		value &= ~(UART_LCR_DLAB << valshift);
+		value &= ~UART_LCR_DLAB;
 		/* fall through */
 	case UART_MCR:
 		offset = UNIPHIER_UART_LCR_MCR;
@@ -199,7 +199,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!regs) {
-		dev_err(dev, "failed to get memory resource");
+		dev_err(dev, "failed to get memory resource\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c7831407a882..25c1d7bc0100 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1625,6 +1625,7 @@ config SERIAL_SPRD_CONSOLE
 config SERIAL_STM32
 	tristate "STMicroelectronics STM32 serial port support"
 	select SERIAL_CORE
+	depends on HAS_DMA
 	depends on ARM || COMPILE_TEST
 	help
 	  This driver is for the on-chip Serial Controller on
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index fd8aa1f4ba78..168b10cad47b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2132,11 +2132,29 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 		mode |= ATMEL_US_USMODE_RS485;
 	} else if (termios->c_cflag & CRTSCTS) {
 		/* RS232 with hardware handshake (RTS/CTS) */
-		if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) {
-			dev_info(port->dev, "not enabling hardware flow control because DMA is used");
-			termios->c_cflag &= ~CRTSCTS;
-		} else {
+		if (atmel_use_fifo(port) &&
+		    !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) {
+			/*
+			 * with ATMEL_US_USMODE_HWHS set, the controller will
+			 * be able to drive the RTS pin high/low when the RX
+			 * FIFO is above RXFTHRES/below RXFTHRES2.
+			 * It will also disable the transmitter when the CTS
+			 * pin is high.
+			 * This mode is not activated if CTS pin is a GPIO
+			 * because in this case, the transmitter is always
+			 * disabled (there must be an internal pull-up
+			 * responsible for this behaviour).
+			 * If the RTS pin is a GPIO, the controller won't be
+			 * able to drive it according to the FIFO thresholds,
+			 * but it will be handled by the driver.
+			 */
 			mode |= ATMEL_US_USMODE_HWHS;
+		} else {
+			/*
+			 * For platforms without FIFO, the flow control is
+			 * handled by the driver.
+			 */
+			mode |= ATMEL_US_USMODE_NORMAL;
 		}
 	} else {
 		/* RS232 without hadware handshake */
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index de9d5107c00a..76103f2c4a80 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -328,7 +328,7 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
 
 	sport->dma_tx_bytes = uart_circ_chars_pending(xmit);
 
-	if (xmit->tail < xmit->head) {
+	if (xmit->tail < xmit->head || xmit->head == 0) {
 		sport->dma_tx_nents = 1;
 		sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes);
 	} else {
@@ -359,7 +359,6 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
 	sport->dma_tx_in_progress = true;
 	sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
 	dma_async_issue_pending(sport->dma_tx_chan);
-
 }
 
 static void lpuart_dma_tx_complete(void *arg)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index d391650b82e7..42caccb5e87e 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -419,6 +419,7 @@ static struct dmi_system_id pch_uart_dmi_table[] = {
 		},
 		(void *)MINNOW_UARTCLK,
 	},
+	{ }
 };
 
 /* Return UART clock, checking for board specific clocks. */
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 2675792a8f59..fb0672554123 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1130,9 +1130,13 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
 {
 	struct sc16is7xx_port *s = gpiochip_get_data(chip);
 	struct uart_port *port = &s->p[0].port;
+	u8 state = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG);
 
-	sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
-			      val ? BIT(offset) : 0);
+	if (val)
+		state |= BIT(offset);
+	else
+		state &= ~BIT(offset);
+	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
 	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
 			      BIT(offset));
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 6e4f63627479..f2303f390345 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -111,7 +111,7 @@ void uart_write_wakeup(struct uart_port *port)
 	 * closed.  No cookie for you.
 	 */
 	BUG_ON(!state);
-	tty_wakeup(state->port.tty);
+	tty_port_tty_wakeup(&state->port);
 }
 
 static void uart_stop(struct tty_struct *tty)
@@ -632,7 +632,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
 	if (port->ops->flush_buffer)
 		port->ops->flush_buffer(port);
 	uart_port_unlock(port, flags);
-	tty_wakeup(tty);
+	tty_port_tty_wakeup(&state->port);
 }
 
 /*
@@ -2746,8 +2746,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 	uport->cons = drv->cons;
 	uport->minor = drv->tty_driver->minor_start + uport->line;
 
-	port->console = uart_console(uport);
-
 	/*
 	 * If this port is a console, then the spinlock is already
 	 * initialised.
@@ -2761,6 +2759,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 
 	uart_configure_port(drv, state, uport);
 
+	port->console = uart_console(uport);
+
 	num_groups = 2;
 	if (uport->attr_group)
 		num_groups++;
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 41d974923102..cd97ceb76e4f 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -31,7 +31,7 @@ struct stm32_usart_info {
 	struct stm32_usart_config cfg;
 };
 
-#define UNDEF_REG ~0
+#define UNDEF_REG 0xff
 
 /* Register offsets */
 struct stm32_usart_info stm32f4_info = {
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f37edaa5ac75..dd4c02fa4820 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1200,6 +1200,7 @@ static int __init cdns_early_console_setup(struct earlycon_device *device,
 OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
 OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
 OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
+OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
 
 /**
  * cdns_uart_console_write - perform write operation
@@ -1438,6 +1439,7 @@ static const struct of_device_id cdns_uart_of_match[] = {
 	{ .compatible = "xlnx,xuartps", },
 	{ .compatible = "cdns,uart-r1p8", },
 	{ .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
+	{ .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
 	{}
 };
 MODULE_DEVICE_TABLE(of, cdns_uart_of_match);