diff options
| author | Lukas Wunner <lukas@wunner.de> | 2017-11-25 01:26:40 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-11-28 18:05:20 +0300 |
| commit | 01d845352a81df133234a106f34cc93937dcb7bd (patch) | |
| tree | ddd7f1e26988c832c090e3f0323429c44c56eda4 /drivers/tty/serial | |
| parent | f1e5b618c1c26cb8b5818e36f996e8c2fbedbeb7 (diff) | |
| download | linux-01d845352a81df133234a106f34cc93937dcb7bd.tar.xz | |
serial: fsl_lpuart: Support common rs485 binding for RTS polarity
Invoke the ->rs485_config callback on probe to set UARTMODEM_TXRTSPOL
appropriately based on the UART's device properties.
This implicitly sets UARTMODEM_TXRTSE if rs485 was enabled in the device
properties, so drop the identical code from lpuart_probe().
It also fixes a bug: If an unsupported rs485 property was specified
(rs485-rx-during-tx or rs485-rts-delay), the driver returns -ENOSYS
without performing any cleanup, in particular without calling
uart_remove_one_port() or clk_disable_unprepare(), thus leaking the
uart_port. But with the invocation of ->rs485_config, the unsupported
properties are now cleared in struct serial_rs485 and thus ignored.
It therefore seems sufficient to just log an error instead of bailing
out.
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 13 |
1 files changed, 3 insertions, 10 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 38e76f95490e..8cf112f2efc3 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2208,21 +2208,14 @@ static int lpuart_probe(struct platform_device *pdev) uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); - if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) { + if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) dev_err(&pdev->dev, "driver doesn't support RX during TX\n"); - return -ENOSYS; - } if (sport->port.rs485.delay_rts_before_send || - sport->port.rs485.delay_rts_after_send) { + sport->port.rs485.delay_rts_after_send) dev_err(&pdev->dev, "driver doesn't support RTS delays\n"); - return -ENOSYS; - } - if (sport->port.rs485.flags & SER_RS485_ENABLED) { - sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND; - writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM); - } + lpuart_config_rs485(&sport->port, &sport->port.rs485); sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); if (!sport->dma_tx_chan) |