diff options
| author | Kranthi Kuntala <kranthi.kuntala@intel.com> | 2020-03-05 17:39:58 +0300 |
|---|---|---|
| committer | Mika Westerberg <mika.westerberg@linux.intel.com> | 2020-06-22 19:58:32 +0300 |
| commit | dacb12877d9222e0281b8391e3361fd4c7a7435a (patch) | |
| tree | c9cf01118dd0b04124d25bdb39a721ca6bcc03fc /drivers/thunderbolt/tb.c | |
| parent | 02d12855f51651cc9cf8e59e6cbb24a5d9e0a054 (diff) | |
| download | linux-dacb12877d9222e0281b8391e3361fd4c7a7435a.tar.xz | |
thunderbolt: Add support for on-board retimers
USB4 spec specifies standard access to retimers (both on-board and
cable) through USB4 port sideband access. This makes it possible to
upgrade their firmware in the same way than we already do with the
routers.
This enumerates on-board retimers under each USB4 port when the link
comes up and adds them to the bus under the router the retimer belongs
to. Retimers are exposed in sysfs with name like <device>:<port>.<index>
where device is the router the retimer belongs to, port is the USB4 port
the retimer is connected to and index is the retimer index under that
port (starting from 1). This applies to the upstream USB4 port as well
so if there is on-board retimer between the port and the router it is
also added accordingly.
At this time we do not add cable retimers but there is no techincal
restriction to do so in the future if needed. It is not clear whether it
makes sense to upgrade their firmwares and at least Thunderbolt 3 cables
it has not been done outside of lab environments.
The sysfs interface is made to follow the router NVM upgrade to make it
easy to extend the existing userspace (fwupd) to handle these as well.
Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/thunderbolt/tb.c')
| -rw-r--r-- | drivers/thunderbolt/tb.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index bbcf0f25617c..f507815040eb 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -539,6 +539,9 @@ static void tb_scan_port(struct tb_port *port) tb_port_dbg(port, "port already has a remote\n"); return; } + + tb_retimer_scan(port); + sw = tb_switch_alloc(port->sw->tb, &port->sw->dev, tb_downstream_route(port)); if (IS_ERR(sw)) { @@ -595,6 +598,9 @@ static void tb_scan_port(struct tb_port *port) if (tb_enable_tmu(sw)) tb_sw_warn(sw, "failed to enable TMU\n"); + /* Scan upstream retimers */ + tb_retimer_scan(upstream_port); + /* * Create USB 3.x tunnels only when the switch is plugged to the * domain. This is because we scan the domain also during discovery @@ -674,6 +680,7 @@ static void tb_free_unplugged_children(struct tb_switch *sw) continue; if (port->remote->sw->is_unplugged) { + tb_retimer_remove_all(port); tb_remove_dp_resources(port->remote->sw); tb_switch_lane_bonding_disable(port->remote->sw); tb_switch_remove(port->remote->sw); @@ -1039,6 +1046,8 @@ static void tb_handle_hotplug(struct work_struct *work) goto put_sw; } if (ev->unplug) { + tb_retimer_remove_all(port); + if (tb_port_has_remote(port)) { tb_port_dbg(port, "switch unplugged\n"); tb_sw_set_unplugged(port->remote->sw); @@ -1283,6 +1292,7 @@ static int tb_free_unplugged_xdomains(struct tb_switch *sw) if (tb_is_upstream_port(port)) continue; if (port->xdomain && port->xdomain->is_unplugged) { + tb_retimer_remove_all(port); tb_xdomain_remove(port->xdomain); port->xdomain = NULL; ret++; |