thermal: ti-soc-thermal: remove dead code

Majority of this code (i.e. functions from ti-bandgap.c) has been
introduced in May 2013 by commit eb982001dbd8 ("thermal: introduce TI
SoC thermal driver"). Just remove it altogether (in case it is needed
it can be easily resurrected from git repo).

While at it fix incorrect "not used" comments.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

1 files changed, 0 insertions, 370 deletions

diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 696ab3046b87..097328d8e943 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -306,217 +306,6 @@ int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
 }
 
 /**
- * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
- * @bgp: struct ti_bandgap pointer
- * @temp: value in mCelsius
- * @adc: address where to write the resulting temperature in ADC representation
- *
- * Simple conversion from mCelsius to ADC values. In case the temp value
- * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
- * The conversion table is indexed by the ADC values.
- *
- * Return: 0 if conversion was successful, else -ERANGE in case the @temp
- * argument is out of the ADC conv table range.
- */
-static
-int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
-{
-	const struct ti_bandgap_data *conf = bgp->conf;
-	const int *conv_table = bgp->conf->conv_table;
-	int high, low, mid;
-
-	low = 0;
-	high = conf->adc_end_val - conf->adc_start_val;
-	mid = (high + low) / 2;
-
-	if (temp < conv_table[low] || temp > conv_table[high])
-		return -ERANGE;
-
-	while (low < high) {
-		if (temp < conv_table[mid])
-			high = mid - 1;
-		else
-			low = mid + 1;
-		mid = (low + high) / 2;
-	}
-
-	*adc = conf->adc_start_val + low;
-	return 0;
-}
-
-/**
- * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
- * @bgp: struct ti_bandgap pointer
- * @adc_val: temperature value in ADC representation
- * @hyst_val: hysteresis value in mCelsius
- * @sum: address where to write the resulting temperature (in ADC scale)
- *
- * Adds an hysteresis value (in mCelsius) to a ADC temperature value.
- *
- * Return: 0 on success, -ERANGE otherwise.
- */
-static
-int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
-			u32 *sum)
-{
-	int temp, ret;
-
-	/*
-	 * Need to add in the mcelsius domain, so we have a temperature
-	 * the conv_table range
-	 */
-	ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
-	if (ret < 0)
-		return ret;
-
-	temp += hyst_val;
-
-	ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
-	return ret;
-}
-
-/***   Helper functions handling device Alert/Shutdown signals   ***/
-
-/**
- * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @t_hot: hot temperature value to trigger alert signal
- * @t_cold: cold temperature value to trigger alert signal
- *
- * Checks the requested t_hot and t_cold values and configures the IRQ event
- * masks accordingly. Call this function only if bandgap features HAS(TALERT).
- */
-static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
-					 u32 t_hot, u32 t_cold)
-{
-	struct temp_sensor_registers *tsr;
-	u32 temp, reg_val;
-
-	/* Read the current on die temperature */
-	temp = ti_bandgap_read_temp(bgp, id);
-
-	tsr = bgp->conf->sensors[id].registers;
-	reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
-
-	if (temp < t_hot)
-		reg_val |= tsr->mask_hot_mask;
-	else
-		reg_val &= ~tsr->mask_hot_mask;
-
-	if (t_cold < temp)
-		reg_val |= tsr->mask_cold_mask;
-	else
-		reg_val &= ~tsr->mask_cold_mask;
-	ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
-}
-
-/**
- * ti_bandgap_update_alert_threshold() - sequence to update thresholds
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @val: value (ADC) of a new threshold
- * @hot: desired threshold to be updated. true if threshold hot, false if
- *       threshold cold
- *
- * It will program the required thresholds (hot and cold) for TALERT signal.
- * This function can be used to update t_hot or t_cold, depending on @hot value.
- * It checks the resulting t_hot and t_cold values, based on the new passed @val
- * and configures the thresholds so that t_hot is always greater than t_cold.
- * Call this function only if bandgap features HAS(TALERT).
- *
- * Return: 0 if no error, else corresponding error
- */
-static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
-					     int val, bool hot)
-{
-	struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
-	struct temp_sensor_registers *tsr;
-	u32 thresh_val, reg_val, t_hot, t_cold, ctrl;
-	int err = 0;
-
-	tsr = bgp->conf->sensors[id].registers;
-
-	/* obtain the current value */
-	thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold);
-	t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
-		__ffs(tsr->threshold_tcold_mask);
-	t_hot = (thresh_val & tsr->threshold_thot_mask) >>
-		__ffs(tsr->threshold_thot_mask);
-	if (hot)
-		t_hot = val;
-	else
-		t_cold = val;
-
-	if (t_cold > t_hot) {
-		if (hot)
-			err = ti_bandgap_add_hyst(bgp, t_hot,
-						  -ts_data->hyst_val,
-						  &t_cold);
-		else
-			err = ti_bandgap_add_hyst(bgp, t_cold,
-						  ts_data->hyst_val,
-						  &t_hot);
-	}
-
-	/* write the new threshold values */
-	reg_val = thresh_val &
-		  ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask);
-	reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) |
-		   (t_cold << __ffs(tsr->threshold_tcold_mask));
-
-	/**
-	 * Errata i813:
-	 * Spurious Thermal Alert: Talert can happen randomly while the device
-	 * remains under the temperature limit defined for this event to trig.
-	 * This spurious event is caused by a incorrect re-synchronization
-	 * between clock domains. The comparison between configured threshold
-	 * and current temperature value can happen while the value is
-	 * transitioning (metastable), thus causing inappropriate event
-	 * generation. No spurious event occurs as long as the threshold value
-	 * stays unchanged. Spurious event can be generated while a thermal
-	 * alert threshold is modified in
-	 * CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n.
-	 */
-
-	if (TI_BANDGAP_HAS(bgp, ERRATA_813)) {
-		/* Mask t_hot and t_cold events at the IP Level */
-		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
-
-		if (hot)
-			ctrl &= ~tsr->mask_hot_mask;
-		else
-			ctrl &= ~tsr->mask_cold_mask;
-
-		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
-	}
-
-	/* Write the threshold value */
-	ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
-
-	if (TI_BANDGAP_HAS(bgp, ERRATA_813)) {
-		/* Unmask t_hot and t_cold events at the IP Level */
-		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
-		if (hot)
-			ctrl |= tsr->mask_hot_mask;
-		else
-			ctrl |= tsr->mask_cold_mask;
-
-		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
-	}
-
-	if (err) {
-		dev_err(bgp->dev, "failed to reprogram thot threshold\n");
-		err = -EIO;
-		goto exit;
-	}
-
-	ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
-exit:
-	return err;
-}
-
-/**
  * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
  * @bgp: struct ti_bandgap pointer
  * @id: bandgap sensor id
@@ -544,165 +333,6 @@ static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
 }
 
 /**
- * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @val: value (mCelsius) of a new threshold
- * @hot: desired threshold to be updated. true if threshold hot, false if
- *       threshold cold
- *
- * It will update the required thresholds (hot and cold) for TALERT signal.
- * This function can be used to update t_hot or t_cold, depending on @hot value.
- * Validates the mCelsius range and update the requested threshold.
- * Call this function only if bandgap features HAS(TALERT).
- *
- * Return: 0 if no error, else corresponding error value.
- */
-static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
-				       bool hot)
-{
-	struct temp_sensor_data *ts_data;
-	struct temp_sensor_registers *tsr;
-	u32 adc_val;
-	int ret;
-
-	ret = ti_bandgap_validate(bgp, id);
-	if (ret)
-		return ret;
-
-	if (!TI_BANDGAP_HAS(bgp, TALERT))
-		return -ENOTSUPP;
-
-	ts_data = bgp->conf->sensors[id].ts_data;
-	tsr = bgp->conf->sensors[id].registers;
-	if (hot) {
-		if (val < ts_data->min_temp + ts_data->hyst_val)
-			ret = -EINVAL;
-	} else {
-		if (val > ts_data->max_temp + ts_data->hyst_val)
-			ret = -EINVAL;
-	}
-
-	if (ret)
-		return ret;
-
-	ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
-	if (ret < 0)
-		return ret;
-
-	spin_lock(&bgp->lock);
-	ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
-	spin_unlock(&bgp->lock);
-	return ret;
-}
-
-/**
- * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @val: value (mCelsius) of a threshold
- * @hot: desired threshold to be read. true if threshold hot, false if
- *       threshold cold
- *
- * It will fetch the required thresholds (hot and cold) for TALERT signal.
- * This function can be used to read t_hot or t_cold, depending on @hot value.
- * Call this function only if bandgap features HAS(TALERT).
- *
- * Return: 0 if no error, -ENOTSUPP if it has no TALERT support, or the
- * corresponding error value if some operation fails.
- */
-static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
-				      int *val, bool hot)
-{
-	struct temp_sensor_registers *tsr;
-	u32 temp, mask;
-	int ret = 0;
-
-	ret = ti_bandgap_validate(bgp, id);
-	if (ret)
-		goto exit;
-
-	if (!TI_BANDGAP_HAS(bgp, TALERT)) {
-		ret = -ENOTSUPP;
-		goto exit;
-	}
-
-	tsr = bgp->conf->sensors[id].registers;
-	if (hot)
-		mask = tsr->threshold_thot_mask;
-	else
-		mask = tsr->threshold_tcold_mask;
-
-	temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
-	temp = (temp & mask) >> __ffs(mask);
-	ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
-	if (ret) {
-		dev_err(bgp->dev, "failed to read thot\n");
-		ret = -EIO;
-		goto exit;
-	}
-
-	*val = temp;
-
-exit:
-	return ret;
-}
-
-/***   Exposed APIs   ***/
-
-/**
- * ti_bandgap_read_thot() - reads sensor current thot
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @thot: resulting current thot value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
-{
-	return _ti_bandgap_read_threshold(bgp, id, thot, true);
-}
-
-/**
- * ti_bandgap_write_thot() - sets sensor current thot
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @val: desired thot value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
-{
-	return _ti_bandgap_write_threshold(bgp, id, val, true);
-}
-
-/**
- * ti_bandgap_read_tcold() - reads sensor current tcold
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @tcold: resulting current tcold value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
-{
-	return _ti_bandgap_read_threshold(bgp, id, tcold, false);
-}
-
-/**
- * ti_bandgap_write_tcold() - sets the sensor tcold
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @val: desired tcold value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
-{
-	return _ti_bandgap_write_threshold(bgp, id, val, false);
-}
-
-/**
  * ti_bandgap_read_counter() - read the sensor counter
  * @bgp: pointer to bandgap instance
  * @id: sensor id