thermal: Use mode helpers in drivers

Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled().

Consequently, all set_mode() implementations in drivers:

- can stop modifying tzd's "mode" member,
- shall stop taking tzd's lock, as it is taken in the helpers
- shall stop calling thermal_zone_device_update() as it is called in the
helpers
- can assume they are called when the mode truly changes, so checks to
verify that can be dropped

Not providing set_mode() by a driver no longer prevents the core from
being able to set tzd's mode, so the relevant check in mode_store() is
removed.

Other comments:

- acpi/thermal.c: tz->thermal_zone->mode will be updated only after we
return from set_mode(), so use function parameter in thermal_set_mode()
instead, no need to call acpi_thermal_check() in set_mode()
- thermal/imx_thermal.c: regmap writes and mode assignment are done in
thermal_zone_device_{en|dis}able() and set_mode() callback
- thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a
part of set_mode() callback, so they don't need to modify tzd->mode, and
don't need to fall back to the opposite mode if unsuccessful, as the return
value will be propagated to thermal_zone_device_{en|dis}able() and
ultimately tzd's member will not be changed in thermal_zone_device_set_mode().
- thermal/of-thermal.c: no need to set zone->mode to DISABLED in
of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com

1 files changed, 14 insertions, 19 deletions

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 2c7ee5da608a..53abb1be1cba 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -255,7 +255,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	bool wait;
 	u32 val;
 
-	if (tz->mode == THERMAL_DEVICE_ENABLED) {
+	if (thermal_zone_device_is_enabled(tz)) {
 		/* Check if a measurement is currently in progress */
 		regmap_read(map, soc_data->temp_data, &val);
 		wait = !(val & soc_data->temp_valid_mask);
@@ -282,7 +282,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	regmap_read(map, soc_data->temp_data, &val);
 
-	if (tz->mode != THERMAL_DEVICE_ENABLED) {
+	if (!thermal_zone_device_is_enabled(tz)) {
 		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
 			     soc_data->measure_temp_mask);
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -365,9 +365,6 @@ static int imx_set_mode(struct thermal_zone_device *tz,
 		}
 	}
 
-	tz->mode = mode;
-	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
 	return 0;
 }
 
@@ -819,7 +816,9 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		     data->socdata->measure_temp_mask);
 
 	data->irq_enabled = true;
-	data->tz->mode = THERMAL_DEVICE_ENABLED;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		goto thermal_zone_unregister;
 
 	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
@@ -861,19 +860,18 @@ static int imx_thermal_remove(struct platform_device *pdev)
 static int __maybe_unused imx_thermal_suspend(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
-	struct regmap *map = data->tempmon;
+	int ret;
 
 	/*
 	 * Need to disable thermal sensor, otherwise, when thermal core
 	 * try to get temperature before thermal sensor resume, a wrong
 	 * temperature will be read as the thermal sensor is powered
-	 * down.
+	 * down. This is done in set_mode() operation called from
+	 * thermal_zone_device_disable()
 	 */
-	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
-		     data->socdata->measure_temp_mask);
-	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
-		     data->socdata->power_down_mask);
-	data->tz->mode = THERMAL_DEVICE_DISABLED;
+	ret = thermal_zone_device_disable(data->tz);
+	if (ret)
+		return ret;
 	clk_disable_unprepare(data->thermal_clk);
 
 	return 0;
@@ -882,18 +880,15 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
 static int __maybe_unused imx_thermal_resume(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
-	struct regmap *map = data->tempmon;
 	int ret;
 
 	ret = clk_prepare_enable(data->thermal_clk);
 	if (ret)
 		return ret;
 	/* Enabled thermal sensor after resume */
-	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
-		     data->socdata->power_down_mask);
-	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
-		     data->socdata->measure_temp_mask);
-	data->tz->mode = THERMAL_DEVICE_ENABLED;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		return ret;
 
 	return 0;
 }