Merge tag 'spi-nor/for-5.18' into mtd/next

SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
  declaration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

6 files changed, 42 insertions, 39 deletions

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index c9a769b8594b..86c76211b3d3 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -585,7 +585,7 @@ static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index c208efeadd18..0bc7daa7afc8 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -693,6 +693,11 @@ static int meson_spicc_probe(struct platform_device *pdev)
 	writel_relaxed(0, spicc->base + SPICC_INTREG);
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out_master;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, meson_spicc_irq,
 			       0, NULL, spicc);
 	if (ret) {
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index a15de10ee286..753bd313e6fd 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -624,7 +624,7 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 	else
 		mdata->state = MTK_SPI_IDLE;
 
-	if (!master->can_dma(master, master->cur_msg->spi, trans)) {
+	if (!master->can_dma(master, NULL, trans)) {
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 514337c86d2c..ffdc55f87e82 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -688,7 +688,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret, irq;
 
-	ctrl = spi_alloc_master(dev, sizeof(*qspi));
+	ctrl = devm_spi_alloc_master(dev, sizeof(*qspi));
 	if (!ctrl)
 		return -ENOMEM;
 
@@ -697,58 +697,46 @@ static int stm32_qspi_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi");
 	qspi->io_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(qspi->io_base)) {
-		ret = PTR_ERR(qspi->io_base);
-		goto err_master_put;
-	}
+	if (IS_ERR(qspi->io_base))
+		return PTR_ERR(qspi->io_base);
 
 	qspi->phys_base = res->start;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm");
 	qspi->mm_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(qspi->mm_base)) {
-		ret = PTR_ERR(qspi->mm_base);
-		goto err_master_put;
-	}
+	if (IS_ERR(qspi->mm_base))
+		return PTR_ERR(qspi->mm_base);
 
 	qspi->mm_size = resource_size(res);
-	if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) {
-		ret = -EINVAL;
-		goto err_master_put;
-	}
+	if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ)
+		return -EINVAL;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto err_master_put;
-	}
+	if (irq < 0)
+		return irq;
 
 	ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
 			       dev_name(dev), qspi);
 	if (ret) {
 		dev_err(dev, "failed to request irq\n");
-		goto err_master_put;
+		return ret;
 	}
 
 	init_completion(&qspi->data_completion);
 	init_completion(&qspi->match_completion);
 
 	qspi->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(qspi->clk)) {
-		ret = PTR_ERR(qspi->clk);
-		goto err_master_put;
-	}
+	if (IS_ERR(qspi->clk))
+		return PTR_ERR(qspi->clk);
 
 	qspi->clk_rate = clk_get_rate(qspi->clk);
-	if (!qspi->clk_rate) {
-		ret = -EINVAL;
-		goto err_master_put;
-	}
+	if (!qspi->clk_rate)
+		return -EINVAL;
 
 	ret = clk_prepare_enable(qspi->clk);
 	if (ret) {
 		dev_err(dev, "can not enable the clock\n");
-		goto err_master_put;
+		return ret;
 	}
 
 	rstc = devm_reset_control_get_exclusive(dev, NULL);
@@ -784,7 +772,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_noresume(dev);
 
-	ret = devm_spi_register_master(dev, ctrl);
+	ret = spi_register_master(ctrl);
 	if (ret)
 		goto err_pm_runtime_free;
 
@@ -806,8 +794,6 @@ err_dma_free:
 	stm32_qspi_dma_free(qspi);
 err_clk_disable:
 	clk_disable_unprepare(qspi->clk);
-err_master_put:
-	spi_master_put(qspi->ctrl);
 
 	return ret;
 }
@@ -817,6 +803,7 @@ static int stm32_qspi_remove(struct platform_device *pdev)
 	struct stm32_qspi *qspi = platform_get_drvdata(pdev);
 
 	pm_runtime_get_sync(qspi->dev);
+	spi_unregister_master(qspi->ctrl);
 	/* disable qspi */
 	writel_relaxed(0, qspi->io_base + QSPI_CR);
 	stm32_qspi_dma_free(qspi);
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 9bd3fd1652f7..7fc24505a72c 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -221,7 +221,6 @@ struct stm32_spi;
  * time between frames (if driver has this functionality)
  * @set_number_of_data: optional routine to configure registers to desired
  * number of data (if driver has this functionality)
- * @can_dma: routine to determine if the transfer is eligible for DMA use
  * @transfer_one_dma_start: routine to start transfer a single spi_transfer
  * using DMA
  * @dma_rx_cb: routine to call after DMA RX channel operation is complete
@@ -232,7 +231,7 @@ struct stm32_spi;
  * @baud_rate_div_min: minimum baud rate divisor
  * @baud_rate_div_max: maximum baud rate divisor
  * @has_fifo: boolean to know if fifo is used for driver
- * @has_startbit: boolean to know if start bit is used to start transfer
+ * @flags: compatible specific SPI controller flags used at registration time
  */
 struct stm32_spi_cfg {
 	const struct stm32_spi_regspec *regs;
@@ -253,6 +252,7 @@ struct stm32_spi_cfg {
 	unsigned int baud_rate_div_min;
 	unsigned int baud_rate_div_max;
 	bool has_fifo;
+	u16 flags;
 };
 
 /**
@@ -1722,6 +1722,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = {
 	.baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN,
 	.baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX,
 	.has_fifo = false,
+	.flags = SPI_MASTER_MUST_TX,
 };
 
 static const struct stm32_spi_cfg stm32h7_spi_cfg = {
@@ -1854,7 +1855,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	master->prepare_message = stm32_spi_prepare_msg;
 	master->transfer_one = stm32_spi_transfer_one;
 	master->unprepare_message = stm32_spi_unprepare_msg;
-	master->flags = SPI_MASTER_MUST_TX;
+	master->flags = spi->cfg->flags;
 
 	spi->dma_tx = dma_request_chan(spi->dev, "tx");
 	if (IS_ERR(spi->dma_tx)) {
diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
index 342ee8d2c476..cc0da4822231 100644
--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -726,7 +726,7 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to get TX DMA capacities: %d\n",
 				ret);
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		dma_tx_burst = caps.max_burst;
 	}
@@ -735,7 +735,7 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 	if (IS_ERR_OR_NULL(master->dma_rx)) {
 		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		master->dma_rx = NULL;
 		dma_rx_burst = INT_MAX;
@@ -744,7 +744,7 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to get RX DMA capacities: %d\n",
 				ret);
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		dma_rx_burst = caps.max_burst;
 	}
@@ -753,10 +753,20 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret)
-		goto out_disable_clk;
+		goto out_release_dma;
 
 	return 0;
 
+out_release_dma:
+	if (!IS_ERR_OR_NULL(master->dma_rx)) {
+		dma_release_channel(master->dma_rx);
+		master->dma_rx = NULL;
+	}
+	if (!IS_ERR_OR_NULL(master->dma_tx)) {
+		dma_release_channel(master->dma_tx);
+		master->dma_tx = NULL;
+	}
+
 out_disable_clk:
 	clk_disable_unprepare(priv->clk);