Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

1 files changed, 41 insertions, 0 deletions

diff --git a/drivers/spi/spi-s3c24xx-regs.h b/drivers/spi/spi-s3c24xx-regs.h
new file mode 100644
index 000000000000..f51464ab5677
--- /dev/null
+++ b/drivers/spi/spi-s3c24xx-regs.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * S3C2410 SPI register definition
+ */
+
+#ifndef __SPI_S3C2410_H
+#define __SPI_S3C2410_H
+
+#define S3C2410_SPCON		(0x00)
+
+#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
+#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
+#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
+#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
+#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
+
+#define S3C2410_SPSTA		(0x04)
+
+#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
+#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
+#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
+#define S3C2412_SPSTA_READY_ORG	(1 << 3)
+
+#define S3C2410_SPPIN		(0x08)
+
+#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED	(1 << 1)
+#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
+
+#define S3C2410_SPPRE		(0x0C)
+#define S3C2410_SPTDAT		(0x10)
+#define S3C2410_SPRDAT		(0x14)
+
+#endif /* __SPI_S3C2410_H */