Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

1 files changed, 21 insertions, 5 deletions

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 11c235879bb7..237bd306c268 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -191,12 +191,12 @@ static void bcm2835_debugfs_remove(struct bcm2835_spi *bs)
 }
 #endif /* CONFIG_DEBUG_FS */
 
-static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
+static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned int reg)
 {
 	return readl(bs->regs + reg);
 }
 
-static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
+static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned int reg, u32 val)
 {
 	writel(val, bs->regs + reg);
 }
@@ -940,6 +940,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 	if (dma_mapping_error(ctlr->dma_tx->device->dev, bs->fill_tx_addr)) {
 		dev_err(dev, "cannot map zero page - not using DMA mode\n");
 		bs->fill_tx_addr = 0;
+		ret = -ENOMEM;
 		goto err_release;
 	}
 
@@ -949,6 +950,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 						     DMA_MEM_TO_DEV, 0);
 	if (!bs->fill_tx_desc) {
 		dev_err(dev, "cannot prepare fill_tx_desc - not using DMA mode\n");
+		ret = -ENOMEM;
 		goto err_release;
 	}
 
@@ -979,6 +981,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 	if (dma_mapping_error(ctlr->dma_rx->device->dev, bs->clear_rx_addr)) {
 		dev_err(dev, "cannot map clear_rx_cs - not using DMA mode\n");
 		bs->clear_rx_addr = 0;
+		ret = -ENOMEM;
 		goto err_release;
 	}
 
@@ -989,6 +992,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 					   DMA_MEM_TO_DEV, 0);
 		if (!bs->clear_rx_desc[i]) {
 			dev_err(dev, "cannot prepare clear_rx_desc - not using DMA mode\n");
+			ret = -ENOMEM;
 			goto err_release;
 		}
 
@@ -1347,7 +1351,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 		goto out_dma_release;
 	}
 
-	err = devm_spi_register_controller(&pdev->dev, ctlr);
+	err = spi_register_controller(ctlr);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI controller: %d\n",
 			err);
@@ -1374,17 +1378,28 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
 
 	bcm2835_debugfs_remove(bs);
 
+	spi_unregister_controller(ctlr);
+
+	bcm2835_dma_release(ctlr, bs);
+
 	/* Clear FIFOs, and disable the HW block */
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
 
 	clk_disable_unprepare(bs->clk);
 
-	bcm2835_dma_release(ctlr, bs);
-
 	return 0;
 }
 
+static void bcm2835_spi_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = bcm2835_spi_remove(pdev);
+	if (ret)
+		dev_err(&pdev->dev, "failed to shutdown\n");
+}
+
 static const struct of_device_id bcm2835_spi_match[] = {
 	{ .compatible = "brcm,bcm2835-spi", },
 	{}
@@ -1398,6 +1413,7 @@ static struct platform_driver bcm2835_spi_driver = {
 	},
 	.probe		= bcm2835_spi_probe,
 	.remove		= bcm2835_spi_remove,
+	.shutdown	= bcm2835_spi_shutdown,
 };
 module_platform_driver(bcm2835_spi_driver);