[PATCH] SGI IOC4: Detect IO card variant

There are three different IO cards which an SGI IOC4 controller may find
itself on.  One of these variants does not bring out the IDE and serial
signals, so we need to disable attaching the corresponding IOC4 subdrivers
to such cards.

Cleans up message clutter emitted during device probing.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 59 insertions, 5 deletions

diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index cdeff909403e..8256a97eb508 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -160,9 +160,6 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd)
 	writel(0, &idd->idd_misc_regs->int_out.raw);
 	mmiowb();
 
-	printk(KERN_INFO
-	       "%s: Calibrating PCI bus speed "
-	       "for pci_dev %s ... ", __FUNCTION__, pci_name(idd->idd_pdev));
 	/* Set up square wave */
 	int_out.raw = 0;
 	int_out.fields.count = IOC4_CALIBRATE_COUNT;
@@ -206,11 +203,16 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd)
 	/* Bounds check the result. */
 	if (period > IOC4_CALIBRATE_LOW_LIMIT ||
 	    period < IOC4_CALIBRATE_HIGH_LIMIT) {
-		printk("failed. Assuming PCI clock ticks are %d ns.\n",
+		printk(KERN_INFO
+		       "IOC4 %s: Clock calibration failed.  Assuming"
+		       "PCI clock is %d ns.\n",
+		       pci_name(idd->idd_pdev),
 		       IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR);
 		period = IOC4_CALIBRATE_DEFAULT;
 	} else {
-		printk("succeeded. PCI clock ticks are %ld ns.\n",
+		printk(KERN_DEBUG
+		       "IOC4 %s: PCI clock is %ld ns.\n",
+		       pci_name(idd->idd_pdev),
 		       period / IOC4_EXTINT_COUNT_DIVISOR);
 	}
 
@@ -222,6 +224,51 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd)
 	idd->count_period = period;
 }
 
+/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT.
+ * Each brings out different combinations of IOC4 signals, thus.
+ * the IOC4 subdrivers need to know to which we're attached.
+ *
+ * We look for the presence of a SCSI (IO9) or SATA (IO10) controller
+ * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
+ * If neither is present, it's a PCI-RT.
+ */
+static unsigned int
+ioc4_variant(struct ioc4_driver_data *idd)
+{
+	struct pci_dev *pdev = NULL;
+	int found = 0;
+
+	/* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */
+	do {
+		pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC,
+				      PCI_DEVICE_ID_QLOGIC_ISP12160, pdev);
+		if (pdev &&
+		    idd->idd_pdev->bus->number == pdev->bus->number &&
+		    3 == PCI_SLOT(pdev->devfn))
+			found = 1;
+		pci_dev_put(pdev);
+	} while (pdev && !found);
+	if (NULL != pdev)
+		return IOC4_VARIANT_IO9;
+
+	/* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */
+	pdev = NULL;
+	do {
+		pdev = pci_get_device(PCI_VENDOR_ID_VITESSE,
+				      PCI_DEVICE_ID_VITESSE_VSC7174, pdev);
+		if (pdev &&
+		    idd->idd_pdev->bus->number == pdev->bus->number &&
+		    3 == PCI_SLOT(pdev->devfn))
+			found = 1;
+		pci_dev_put(pdev);
+	} while (pdev && !found);
+	if (NULL != pdev)
+		return IOC4_VARIANT_IO10;
+
+	/* PCI-RT: No SCSI/SATA controller will be present */
+	return IOC4_VARIANT_PCI_RT;
+}
+
 /* Adds a new instance of an IOC4 card */
 static int
 ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
@@ -286,6 +333,13 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 
 	/* Failsafe portion of per-IOC4 initialization */
 
+	/* Detect card variant */
+	idd->idd_variant = ioc4_variant(idd);
+	printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev),
+	       idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" :
+	       idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" :
+	       idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown");
+
 	/* Initialize IOC4 */
 	pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd);
 	pci_write_config_dword(idd->idd_pdev, PCI_COMMAND,